10...72 kWe powered by Characteristics Code 15SI-44F COP [kWe] COP [kVA] Engine Power [kWm] Cylinders Bore/Stroke [mm] 10 12.5 13 3 in line 84/900 Displace Fuel ment consumption [cm3] [l/h] 1496 TBD Fuel tank capacity [l] Engine speed [rpm] Dimensions LxWxH [mm] Dry Weight [kg] Dimensions in canopy [mm] Weight with canopy [mm] 100 1500 1800x725x1338 1081 - - 22SI-144D 16 20 18 4 in line 84/100 2216 TBD 100 1500 1800x725x1338 1126 - 33SI-144E 25 31 32 3 in line 105/127 3300 TBD 100 1500 1800x725x1338 1141 - - 44SI-144K 34 42.5 43 4 in line 105/127 4410 TBD - 1500 2200x725x1338 1221 - - 1500 2200x725x1338 1251 - - 1500 2200x725x1338 1484 - - 60SI-224E 48 60 54 6 in line 100/127 5990 TBD - 70SI-224F 72 90 80 6 in line 105/127 6600 TBD - Continuous power is defined as being the maximum power which the generating set is capable of delivering continuously whilst supplying a constant electrical load when operated for an unlimited number of hours per year under the agreed operating conditions with the maintenance intervals and procedures being carried out as prescribed by the manufacturer. The manufacturer reserves the right to make changes at any time, without notice, as to technical data, prices, materials, standard equipment, specifications and models, and to discontinue models. The generating set illustrated may not be entirely identical to production standard. ZXS-2015-10-100-1502023-00 KVT Gas delivers customers reliable power from proven diesel engine technology making the installation versatile, quiet and clean. The gas engines are based on Perkins diesel engines and therefore compact and reliable, for use as standby, prime or continuous power generation, as well as coand trigeneration CHP. They also offer them engines for variable speed applications such as material handling equipment. Available for use with Natural gas, CNG, LPG also Bio, syn gas and other process gases. KVT uses specially designed components to make the engine much more structurally robust than any other conventional spark ignition engine. The combustion chamber components are designed to withstand high cylinder temperatures and peak pressures. This lowers the stress levels resulting in longer service life, higher reliability and lower maintenance costs. STANDARD EQUIPMENTS Base Frame: - mechanically welded chassis - w or w/o fluid recovery tank - antivibration dampers Engine: - 4 stroke industrial water cooled, spark ignition engine; - 1500 rpm with mechanical/electronical governor; - heat-exchanger or radiator with drain tap; - standard air filter; - protective grille for fan and rotating parts. Alternator: - brushless syncrhonous alternator; - single bearing; - IP23 up to 145 kVA; - overload acceptance: 10% for 1 hour; - AVR 0.5%; - insulation class H, temperature rise class F; - 231/400 V, 50Hz; Engine Control Panel: - microprocessed electronic controller; - built-in governor control; - automatic speed control; - manual speed control via push buttons, digital input or analogue input; - automatic speed ramping; - remote panel for control and monitoring. Generating Set: - exhaust compensator with brackets or pipe; - double walled fuel line with leakage device; - closed crankcase ventilation; - oil drainage pump; - 15 dB(A) silencer supplied separately - air fuel ratio control & actuator - complete ignition kit - ignition coils - stop valve & fuel level transducer - pressure regulator & vaporisateur ZYRAXES S.R.L. 76 Drumul Cretestilor str., 4th sector, 042183 code, Bucharest - Romania Tel: +40(0)745 343735, +40(0)31 4250720; Fax: +40(0)31 4250721 e-mail: [email protected]; www.zyraxes.ro