Photovoltaics *Also support parallel feature to 3-phase feedback (3 units) MPI Hybrid Series These hybrid solar inverters combine the features of both grid-tied and off grid operations, and allow users to operate in three main modes: ● Grid-Tied (Feedback) ● Off Grid ● Grid-Tied with Battery Backup Available in 3kw (single phase version) and 10kw (3-phase version), these hybrid systems offer a pure sine wave inverter, a battery charger, and support of PV input up to 500V (3kw model) and 900V (10kw model) with MPPT functionality. Maximum PV power input is enhanced to 4.5kw and 14.85kw array, which allows users greater flexibility in supporting load as well as feeding extra solar power back to grid. In the event of grid failure, these systems will switch to battery source like an off-grid inverter and keep your load backed up. The bundled powerful monitoring software, SolarPower, allows users total control and access to a wide variety of operations to meet all your need. This series is fully compliant with and certified in VDE (Germany), AS (Australia), and CE. **Optional communication accessories include MODBUS card, MODBUS server, and Energy Meter. Available upon request [email protected] │ www.mppsolar.com Operation Modes SOLAR BATTERY SOLAR BATTERY SOLAR BATTERY UTILITY HOUSE LOAD UTILITY In this operation mode, users can program unit to ● Feedback PV power to utility ● Provide PV power to load ● Charge battery by PV Different priority settings based on the above are offered in 4 main options in this mode. Charging source may be selected from PV and grid as default, PV only, or none (when charging not intended). All programming conditions can be done in the CDbundled software. In this operation mode, the inverter will only behave like a pure grid-tie inverter where it only feeds back electricity to grid from PV source. There is no priority setting available when this mode is selected. HOUSE LOAD UTILITY HOUSE LOAD In this operation mode, grid feedback to utility is disabled. Users can only program unit to: ● Provide PV power to load ● Charge battery by PV Different priority settings are available in 3 options, and grid relay may be connected to inverter to provide support when load > 3kw. Charging source may be selected from PV and grid, PV only, or none (charging not intended). All programming conditions can be done in the CD-bundled software. *Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc. [email protected] │ www.mppsolar.com Parallel Concept *Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc. [email protected] │ www.mppsolar.com Parallel Concept *Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc. [email protected] │ www.mppsolar.com Specifications MPI-3000 HYBRID 3K MPI-10000 HYBRID 10K 3,000W 10,000W Max PV Input Power 4500W 14850W Max PV Input Voltage 500Vdc 900Vdc Start-up / Initial Feeding Voltage 116 / 150Vdc 320 / 350 Vdc PV MPPT Range 250 - 450Vdc 350 - 850 Vdc 18A 18A x 2 1 2 >96% >96% Rated Power Continuous Output PV Input Rating (GRID-TIE) Max PV Input Current MPPT Tracker Max DC/AC Conversion Efficiency AC Input 120 - 140Vac / 180Vac Start-up / Auto Restart Voltage Input Voltage Range 170 - 280Vac Nominal Frequency 50 / 60 Hz Max AC Input Power 5,100W 10,000W 30A 25A 208/220/230/240Vac 230Vac (P-N) / 400Vac (P-P) 184 - 265Vac 184 - 265Vac (P-N) / 318 - 460Vac (P-P) Max AC Input Current AC Output Nominal AC Output Voltage Output Voltage Range Output Frequency (GRID-TIE) 47.5 - 51.5Hz / 59.3 - 60.5 Hz Output Frequency (OFF-GRID) 50 / 60Hz, auto-sensing Pure Sine Wave Output Waveform Max Output Power (via grid relay) 6,000W 10,000W Max Output Power (battery mode) 3,000W 10,000W >93% >91% Max Efficiency Battery Charger 48Vdc Nominal DC Voltage 25A Max Charging Current 200A ENVIRONMENTAL / MECHANICAL SPECIFICATIONS RS232 / USB Communication Port Certifications Operating Temp. EN62109-1, EN62109-2, EN62040-1 / CE VDE4105, VDE0126-1-1 0 - 40°C -10 - 50°C 0 - 90% RH (No condensing) Operating Humidity Dimension 420*415*170mm 622*500*167mm Net Weight 16Kg 45Kg *Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc. [email protected] │ www.mppsolar.com
© Copyright 2024