“ADD A PIECE OF
YOUR LIFE
TO
YOUR BIKE”
The Medallion Plate Covers
Fits all bikes and vehicles
Motordog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-ACM-1.8 “ACM” Air Cleaner Coin Mount
The ACM 1.8 – Designed to enhance and personalize a stock Harley air cleaner cover. The
ACM’s character cleans up the look and hides that ugly center bolt when attached to a Harley air cleaner cover, giving a unique personalized look with your favorite coin.
ACM 1.8 - Allows the owner to easily mount and remove a 1 3/4” challenge coin on a
stock Harley air cleaner cover.
ACM 1.8 - is non permanently attached with a NEW mounting bolt to your stock Harley air
cleaner cover (NEW MOUNTING BOLT INCLUDED). Coin is then non permanently attached
with rtv silicone to the ACM 1.8 mount.
ACM 1.8 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy,
5
layers of show chrome plated, all medallions and challenge coins are metal and enameled.
Part# JMPC-ACM-1.8 - Fits on a stock Harley air cleaner cover, years 1999 to new bikes.
Also fits older EVO style flat round air breather covers 1999 – 1984.
Motordog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-HC-1.8
“The Crown 1.8” Horn Cover Coin Mount
The Crown 1.8 - Designed to give new life to a stock Harley cow bell horn cover. The
Crown’s character pushes the boundary outward when attached to a Harley cow bell horn
cover, giving a unique custom personalized look.
The Crown 1.8 - The Horn Cover Coin Mount allows a rider to easily mount and remove a
1 ¾” or 1 1/2” Dia. challenge coin on a stock Harley horn cover, years 1992 to new bikes.
The Crown 1.8 - Attached permanently with rtv silicone to your stock Harley horn cover.
The Crown 1.8 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy, 5 layers of show chrome plated, all medallions and challenge coins are metal and
enameled.
Part# JMPC-HC-1.8
bikes
fits all model stock Harley cow bell horn covers 1992 to new
Motordog69 inventors and manufacturers of the Medallion Plate Covers
All Timing Cover Coin Mounts
Max - 1.8 - Designed to maximize its full potential with a 60% slope, Max’s stout, rugged
personality comes thru when mounted on a motorcycle engine, showing off his coin.
Max - 1.8 - Used to mount and remove a 1 3/4” challenge coin to your Harley engine.
The Edge -1.5 - Used to mount and remove a 1 1/2” challenge coin to your Harley engine.
Recovery - 1.3 - Used to mount and remove all A/A & N/A, 1 5/16” recovery medallions.
5 hole MPC’s fit all big V Twin Harley Davidson engines 1999 to new bikes.
2 hole MPC’s fit all EVO big V Twin Harley Davidson engines 1970 - 1999, also Sportsters
models 1970 - new bikes
2 hole MPC’s are custom made for many S&S engines.
All timing cover MPC’s are made in the USA of 100% metal, rugged and rich, 5 layers of
show chrome plated, all medallions and challenge coins are metal and enameled.
Part# JMPC-M5-1.8 - fits all Harley big V twin timing covers from 1999 - to new bikes
Part# JMPC-M2-1.8 -fits all Harley Evo 1970—1999, Sportster engines 1970 - to new bikes
Motordog69 inventors and manufactures of the Medallion Plate Covers
JMPC-FD-1.8
“Tank 1.8” Fuel Door Coin Mount
Tank 1.8 – The first MPC for the Harley fuel door, when attached it reflects its owners
pride, giving a cool look and a personalized touch to your bike.
Tank 1.8 - Allows a rider to easily mount and remove a 1 ¾” challenge coin on a stock
Harley fuel door, for years 1992 to new bikes.
Tank 1.8 - Attached permanently with rtv silicone to your stock Harley fuel door.
Tank 1.8 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy, 5
layers of how chrome plated; all medallions and challenge coins are metal and enameled.
Part# JMPC-FD-1.8 fits all model stock Harley Davidson fuel door covers 1992 to new
bikes
Motordog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-FC-1.8 “Cap” Fuel Cap Coin Mount
The FC 1.8 – when attached to your own stock Harley fuel Cap cover, The FC 1.8 offers a
triple side edge, reflecting its owners pride back giving a unique and custom look with your
favorite coin.
FC 1.8 - Allows the owner to easily mount and remove a 1 3/4” challenge coin on a stock
Harley Fuel Cap cover.
FC 1.8 - is permanently attached with rtv silicone to your stock Harley Fuel Cap cover.
Then the challenge coin is then non permanently mounted with a small amount of rtv silicone to FC 1.8 mount. You can also remove the coin by popping it out with the side slot,
and remount a new coin, to get a new personalized look
FC 1.8 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy, 5 layers of show chrome plated, all medallions and challenge coins are metal and enameled.
Part# JMPC-FC-1.8 - Fits on a stock Harley Fuel Cap covers, years 1992 to new bikes. excluding Sportster Custom models, and Vrods.
MotorDog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-UM-1.8 “UCM” Universal Coin Mount
UCM 1.8 – Designed to give new life to anything you would like to mount it to. The UCM
character pushes outward when attached to a bike, car, boat, giving a unique custom personalized look.
UCM 1.8 - Allows the owner to easily mount and remove a 1 3/4” or 1 1/2” challenge coin
on any motorcycle, car, boat, truck, or any item you’d like to personalize. Mounts to any
flat or slightly curved surface.
UCM 1.8 - Mounted permanently with rtv silicone, or non permanently with small screws.
UCM 1.8 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy,
5
layers of show chrome plated, all medallions and challenge coins are metal and enameled.
Part# JMPC-UM-1.8 - Fits on anything slightly curved or flat. Universal Coin Mount
MotorDog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-U2 “U2” Universal 2” Coin Mount
U2 – Designed to give new life to anything you would like to mount it to. U2’s Tripple edge
reflects your pride when attached to a bike, car, boat, giving a unique custom personalized
look.
U2 - can be mounted on any slightly curved or flat surface.
U2- Allows the owner to easily mount and remove a 2” challenge coin on any bike, car,
boat, truck, or any vehicle you’d like to personalize.
U2 - Mounted permanently with rtv silicone, or non permanently mounted with screws.
U2 - Made in the USA of 100% 6061 aircraft aluminum, light weight and sturdy, 5 layers
of show chrome plated, all medallions and challenge coins are metal and enameled.
Part# JMPC-U2 - Fits on anything slightly curved or flat. Universal 2” Coin Mount
MotorDog69 inventors and manufacturers of the Medallion Plate Cover
JMPC-VCHC 1.8 - Victory Cheese Wedge Coin Mount - “VCHC”
1 3/4" Diameter Coins or Medallions fit in "VCHC”
(Challenge coins are sold separately - coin showing for display purpose only)
VCHC 1.8 - Designed to give new life to your stock Victory Cheese Wedge cover, rugged and durable, 5plated show chrome and made of 6061 aircraft aluminum.
VCHC 1.8 - Easily mount and remove your a 1 3/4" challenge coin on your stock Victory Cheese Wedge (can
be mounted on the Cheese Wedge with or without the Victory Cheese Wedge insert, shown in the picture)
VCHC 1.8 - The Victory Cheese Wedge coin mount is attached permanently to your stock Victory Cheese
Wedge cover with RTV silicone.
VCHC 1.8 - A 1-3/4" challenge coin is non-permanently mounted with a small amount of same RTV silicone
VCHC 1.8 - You can also remove the coin by popping it out with the bottom slot, and remount a new coin, to
get a new personalized look.
VCHC 1.8 - The Cheese Wedge coin mount and coin will not rattle off your Victory Cheese Wedge if you follow MotorDog69's instructions.
VCHC 1.8 - Fits all model Victory’s that have a Cheese Wedge.
Pick your 1 ¾" challenge coin from our selection, and make the Victory Cheese Wedge personal.
"Mount a coin, Ride with Pride, pop the coin out, re-mount a new coin, get a new Personalized look"
MotorDog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-GUCM 1.8 - Goldwing Universal Coin Mount "GUCM"
1 3/4" Diameter Coins or Medallions fit in "GUCM”
(Challenge coins are sold separately - coin showing for display purpose only)
GUCM 1.8 - Designed to give new life to multiple locations on your Goldwing. The GUCM character pushes
outward when attached to a Goldwing giving a unique and custom personalized look.
GUCM 1.8 - Will mount on any flat or slightly curved surface, coin mount is approx. 2 1/8" in diameter.
GUCM 1.8 - Allows a rider to easily mount and remove a 1 ¾" Challenge Coin. Coin is held in with a small
amount of RTV silicone, you can also pop the coin out thru the side slot, then remount a new
challenge coin, and get a new personalized look.
GUCM 1.8 - Mount can either be attached permanently with RTV Silicone, or non-permanently with
screws.
GUCM 1.8 - Made of 100% 6061 aircraft aluminum, light weight and sturdy, five layer show chromed, all
medallions and challenge coins are metal and enameled.
Pick your 1 ¾" challenge coin from our selection, and make the Goldwing Universal Coin Mount personal.
"Mount a coin, Ride with Pride, pop the coin out, re-mount a new coin, get a new Personalized look"
MotorDog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-IFCM 1.8 - Indian Gas Cap Coin Mount "IFCM"
1 3/4" Diameter Coins or Medallions fit in "IFCM”
(Challenge coins are sold separately - coins shown for display purpose only)
IFCM 1.8 - When attached to your own stock Indian gas cap cover, The IFCM offers a triple-sided edge,
reflecting its owner’s pride back giving a unique and custom look with your favorite coin.
IFCM 1.8 - Is permanently mounted with RTV silicone to your own stock Indian gas cap cover, then the challenge coin is non-permanently mounted to the IFCM with a small amount of the same RTV silicone. You can
also remove the coin by popping it out with the side slot, and remount a new coin, to get a new personalized
look.
IFCM 1.8 - is made of 100% 6061 Aircraft aluminum, lightweight and sturdy, and is five layer plated show
chromed.
IFCM 1.8 - Fits all stock Indian gas cap covers.
This will not rattle off you gas cap cover if you follow MotorDog69's instructions.
The challenge coin is shown for display purposes, please choose from our selection and make your Indian gas
cap personal!
"Mount a coin, Ride with Pride, pop the coin out, re-mount a new coin, get a new Personalized look".
MotorDog69 inventors and manufacturers of the Medallion Plate Covers
JMPC-IUCM 1.8 - Indian Universal Coin Mount "IUCM"
1 3/4" Diameter Coins or Medallions fit in "IUCM"
(Challenge coins are sold separately - coin showing for display purpose only)
IUCM 1.8 - Designed to give new life to multiple locations on your Indian. The IUCM character pushes
outward when attached to an Indian, giving a unique custom personalized look.
IUCM 1.8 - Will mount on any flat or slightly curved surface, coin mount is approx. 2 1/8" in diameter.
IUCM 1.8 - Allows a rider to easily mount and remove a 1 ¾" Challenge Coin on any model Indian. Coin is
held in with a small amount of RTV silicone, you can also pop the coin out thru the side slot, then remount a
new challenge coin, and get a new personalized look.
IUCM 1.8 - Mount can either be attached permanently with RTV Silicone, or non-permanently with screws.
IUCM 1.8 - Made of 100% 6061 aircraft aluminum, light weight and sturdy, five layer show chromed, all
medallions and challenge coins are metal and enameled.
Pick your 1 ¾" challenge coin from our selection, and make the Universal Coin Mount personal.
“Mount A Coin, Ride With Pride, Pop the coin out, Re-Mount A New Coin, Get A New Personalized Look!”
“THE MPC AND FREEDOM RIDE TOGETHER”
Top Challenge Coins
Veteran - U.S. Air Force
(760582)
1 3/4”
Veteran - U.S. Marines
(760583)
1 3/4”
Veteran - U.S. Army
(760581)
1 3/4”
Veteran - U.S. Navy
(760608)
1 3/4”
Vietnam Veteran - Country
Vietnam Veteran Engravable
(715027)
Veteran Desert Storm
(760564)
1 3/4”
(761039)
1 3/4”
Operation Enduring
Freedom
(760574)
1 3/4”
Page 1
1 3/4”
Operation Iraqi Freedom
(760573)
1 3/4”
“THE MPC AND FREEDOM RIDE TOGETHER”
Top Challenge Coins
Retired Marine
(760617)
1 3/4”
Retired Navy
(760607)
1 3/4”
Purple Heart
(713064)
1 3/4”
Retired Air Force
(760549)
1 3/4”
Retired Army
(760548)
1 3/4”
Soldier’s Cross
(MD69001)
1 3/4”
Sniper
(760805)
1 3/4”
Bronze Star
(S713602)
1 3/4”
Silver Star
(S748237)
1 3/4”
Page 2
“THE MPC AND FREEDOM RIDE TOGETHER”
Top Challenge Coins
New Masonic Coin
Shriner’s Coin
Skull & Crossbones
(MD69002)
(MD69003)
(MD69004)
1 3/4”
1 3/4”
1 3/4”
Armor of God
Armor of God High Relief
Dead Man’s Hand
(760718)
(760718)
1 3/4”
1 3/4”
(Ace & 8’s)
The Lord’s Prayer
760803
One day At A Time
748353
1 3/4”
1 3/4”
1 3/4”
Heads And Tails
734021
1 3/4”
Page 3
“THE MPC AND FREEDOM RIDE TOGETHER”
Top Challenge Coins
Thank You to Troops
POW/MIA
Don’t Tread On Me
(760565)
(760566)
(748125)
1 3/4”
1 3/4”
God Bless America
IAFF
Fire Rescue
(760872)
(748620)
(760732)
1 3/4”
1 3/4”
1 3/4”
September 11 - Operation
Enduring Freedom
(748446)
1 3/4”
New Law Enforcement
Coin
(MD69005)
1 3/4”
Page 4
1 3/4”
Saint Michael - Liberty
Justice
(748736)
1 3/4”