1. No category

List of Accepted Papers
Track 4: Mechanical Engineering
Paper
ID
ME-121
ME-122
Authors’
Name
Amit Sharma, Satpal
Manpreet Singh
Bahra , Lakshya
Aggarwal,
V.K.Gupta
Affiliation
1Assistant Professor, Department of Mechanical
Engineering,
2Assistant Professor, Department of Architecture,
Deenbandhu Chhotu Ram University of Science &
Technology, Murthal, Haryana
1 (P.G. Student, Department of Mechanical
Engineering, Punjabi University, Patiala- 147002,
India)
2 (Associate Professor, M.M. University, Sadopur,
Ambala, India)
3 (Professor, Department of Mechanical
Engineering, Punjabi University, Patiala-147002,
India)
Paper Title
Carbon Credit earning model for a
University based on replacing 1 Star
with 5 Star Air-conditioner: A case
study
Natural fiber reinforced
polypropylene composites: A review
ME-123
Ashish Goyal,
Rajeev Kumar ,
Mayur Rajeshwar
Randive ,Tarsem
Singh
1,3-Research Scholar, Department of Mechanical
Engineering, Lovely Professional University,
Phagwara, Punjab, India
ME-124
Taliv
Hussain,Gourav Roy,
Babool Rai,Rahul
Wandra
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
ME-125
Ahsan Moazzam,
Manoj Kumar
1,2-Department of ME, Sant longowal Institute of
Engineering and Technology, India
ME-128
Mayur Rajeshwar
Randive, Rajeev
Kumar, Ashish
Goyal
ME-130
Madhu Samboji ,
Sardar Jaspal Singh ,
N. Dhiraj Kumar
ME-131
Pooja Yadav, Amit
Sharma
1,2(Mechanical, DCRUST, Murthal, India)
Exergy Analysis of R134a Based
Vapour Compression Refrigeration
Tutor
ME-132
Itinder Singh, Shishir
Sinha, Vinay Gupta,
Lakshya Aggarwal
1 Research Scholar, Department of Mechanical
Engineering, Maharishi Markandeshwar
University, Sadopur (Ambala), Haryana (India)
2 Professor, Department of Chemical Engineering,
Development of Natural fiber
reinforced recycled Polyethylene
composite
1|Page
1, 3(Research Scholar, Department of Mechanical
Engineering, Lovely Professional University,
Phagwara, Punjab, India)
2 (Faculty, Department of Mechanical
Engineering, Lovely Professional University,
Phagwara, Punjab, India)
1(Department of Mechanical Engineering, JNTU
College of Engineering, Manthani, TelanganaINDIA)
2, 3(Faculty of Technology, University College of
Technology, Osmania University, Hyderabad,
Telangana -INDIA)
Analysis Of Fault Diagnosis Of
Bearing Using Supervised Learning
Method
Experimental Study of Performance
Comparison of Air Cooled and
Water condenser in Ammonia
Vapour Absorption Refrigeration
System
Working Experience and Smoker
Workers Impact on Carpal Tunnel
Syndrome (CTS)
Analysis of Artificial Support
Structure for Knee Joint
Finite Element Analysis of
Automobile LPG Cylinder Using
Composite Material
AETM’15
ME-134
Chatter Pal Saini,
Sandeep Kumar
IIT Roorkee, Roorke, (India)
3 Professor, Department of Mechanical
Engineering, Punjabi University, Patiala, (India)
4 Associate Professor, Department of Mechanical
Engineering, Maharishi Markandeshwar
Engineering College, Sadopur (Ambala), Haryana
(India)
1Department of Mechanical Engineering, E-max
Group of Institutions, Ambala, Haryana (India)
2Department of Mechanical Engineering, M. M.
University, Sadopur, Ambala Haryana (India)
1,2,3(Department of Mechanical Engineering,
Lovely Professional University Phagwara,Punjab
(India) -144402)
4(Department of Mechanical Engineering, DAV
Institute of Engineering & Technology, Punjab
(India)-144008)
ME-135
Rahul Wandra,Taliv
Hussain , Gourav
Roy, Rahul Thukral
ME-136
Rahul Wandra, Taliv
Hussain, Anugrah
Soy, Sarvasindhu
Mishra,Rishabh
Yadav
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
ME-138
Taliv Hussain,
Vikash Sharma, Amit
Kumar Rai, Aman
Keshari
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
ME-139
ME-140
ME-141
Taliv Hussain,
Md.Sabbir Ali,
Saddamul Haque
,Wasiur Rahman
Taliv Hussain,
Jyotirmay Sen,
Uttam Morang,
Dennis J Saru,
Manosh Jyoti
Taliv Hussain,
Wasiur Rahman,
Rocky Singh
Labana, Kapil
Dhankher
ME-143
Preeti, Dr. Rajesh
Khanna, Rahul Dev
Gupta, Vishal Gupta
ME-144
Sachin Mahendru,
Dr. Bikramjit Singh,
Dr. S.S. Jolly
ME-145
Saurabh Bhardwaj,
C.S. Jawalkar
2|Page
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
Effect of Vibration on Heat Transfer
Enhancement in a Rectangular
Channel Heat Exchanger
Experimental Study of Improving the
COP of VCRS system by using
Single and Double Cellulose pad in
Cooling Tower
Application And Effectiveness Of
Low Cost Solar Cabinet Dryer:
Experimental Investigation
Experimental Study Of The Green
House Effect On Solar Cooker And
Water Heater Integrated With Pcm
Materials (Paraffin Wax, Stearic
Acid And Zinc Nitrate Hexahydrate)
Performance Evaluation Of Liquid
Flat Plate Collector By Comparing
The Normal Water With Nacl
Solution As A Working Fluid
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
Experimental Investigation Of
Performance Comparison Of Electric
Powered Vcrs With Solar Assisted
Vcrs
Department of Mechanical Engineering,
Lovely Professional University Phagwara,
Punjab (India) -144402
To Evaluate The Performance Of
Liquid Flat Plate Collector By
Comparing Two Different Insulation
Materials As Glass Wool And Foam
1(Mechanical Engineering, MM University, India)
2(Mechanical Engineering, MM University, India)
3(Mechanical Engineering, MM University, India)
4(Mechanical Engineering, IIT Delhi, India)
1(Department of Mechanical Engineering, MM
University, Ambala, India)
2(Department of Mechanical Engineering, MM
University, Ambala India
3(Department of Mechanical Engineering, MM
University, Ambala India)
1M.E student, Production and Industrial Eng., PEC
University of Technology, Chandigarh, India
2Assiatant Professor, Production and Industrial
Eng., PEC University of Technology, Chandigarh,
Measuring Material Removal Rate of
Marble by Using Abrasive Water Jet
Machining
Unleashing the Challenges before
PVC Pipe Extrusion SMEs through
D-Phase of Six Sigma
A study on Supply Chain issues of
Indian Railway in Samastipur
division using AHP technique
AETM’15
India
ME-146
Lokesh Singh,
Suneer Singh
Rawat,Taufeeque
Hasan, Upendra
Kumar
ME-147
Gourav Roy, Taliv
Hussain, Rahul
Thukral , Rahul
Wandra
ME-148
Vinod Kumar, Vikas
Kumar, Kamal
Kumar
ME-152
Magesh Raj
Ravindran
Department of Aeronautical and Aerospace
Engineering, Gurukul Vidyapeeth Institute of
Engineering and Technology (GVIET),India
ME-156
Arpit Thakur, Ashish
Sharma
1, 2(Department of Mechanical Engineering,
Lovely Professional University, India)
ME-158
Kamal Kumar
Jangra, Tilak Raj,
Neeraj Sharma
ME-159
Vinod Kumar, Vikas
Kumar, Kamal
Kumar
ME-160
V.M Kalra, Tilak
Thakur, B.S Pabla
ME-165
Venkata Sanyasi
Seshendra Kumar
Karri
1(Department of Industrial Engineering, Gitam
University, Visakhapatnam, India)
A Comparative analysis of VonMisses stress distribution in engine
shafts
ME-166
Manish Kumar
Tated, Dinkar Prasad
Singh and Sudhanshu
Dogra
1,2Department of Mechanical Engineering, Lovely
Professional University, (India)
3Assistant Professor, Department of Mechanical
Engineering, Lovely Professional University,
(India)
Heat Transfer and Friction Factor
Characteristics of Double Pass Solar
Air Heater UsingW-Shaped Artificial
Roughness Ribs
ME-167
ME-168
SourabhDhawan,
Harinder Singh,
Ranjit Singh
Harpinder Singh
Sandhu , Vidhata
Metha, Jatin
3|Page
1, 3Department of Mechanical and Automation
Engineering, Amity University, Gurgaon, India
4 Department of Electronics and Communication
Engineering, Amity University, Gurgaon, India
1, 2,4(Department of Mechanical Engineering,
Lovely Professional University Phagwara,,Punjab
(India) -14440)
3(Department of Mechanical Engineering, DAV
Institute of Engineering & Technology, Punjab
(India)-144008)
1(Department of Mechanical Engineering, YMCA
University of Science and Technology, Faridabad,
India)
2(Department of Mechanical Engineering, PEC
University of Technology, Chandigarh, India)
1(Department of Mechanical Engineering, PEC
University of Technology, Chandigarh, India)
2(Department of Mechanical Engineering, YMCA
University of Science and Technology, Faridabad,
India)
1(Department of Mechanical Engineering, YMCA
University of Science and Technology, Faridabad,
India)
2(Department of Mechanical Engineering, PEC
University of Technology, Chandigarh, India)
1(Department of Electronics and Communication
Engineering, S.J.P Polytechnic Damla, Yamuna
Nagar, Haryana, India)
2(Department of Electrical Engineering, PEC
University of Technology,Chandigarh, India)
3(Department of Mechanical Engineering,
NITTTR Sector 26, Chandigarh, India)
Baba Banda Singh Bahadur Engineering College,
Fatehgarh Sahib (PTU)
1 School of Mechanical Engineering, Lovely
Professional University, Punjab, India
Finite Element Analysis of Piston in
Ansys
Experimental Investigation of
Comparison of Normal Cooling
Tower and Evaporative Cooling
Tower in VCRS System
Effect of WEDM Parameters on
Machinability of Titanium alloys
Ti6AlNb
Computational Study for Analysis of
the Potential for Drag Reduction for
Flow around a Circular Cylinder and
Cactus-Shaped Cylinders
CFD Analysis of Earth-Air Heat
Exchanger to Evaluate the Effect of
Parameters on Its Performance
Fabrication and Development of Die
for Powder Compaction Press
Surface Integrity Analysis Of
Machined Surface After Rough
Cutting Operation In WEDM
Operational Analysis of Mining
Equipment in Open Cast Mine using
Overall Equipment Effectiveness
(OEE)
Slurry erosion studies of HydroTurbine Steel (Grade-316) under
hydro accelerated conditions
Investigation of Electric Discharge
Machining of Inconel 718 using
Special Graphite Electrode
AETM’15
Manchanda, Gurpreet
Singh Phull
ME-170
Aal Arif Sarkar, Raja
Sekhar Dondapati
ME-171
Ketan Ajay, Kundan
Lal
ME-175
Hardeep Singh,
Er.Sanpreet
Singh,Dr.Gurpreet
Singh
4|Page
1(Department of Mechanical Engineering, Lovely
Professional University, India)
2(Department of Mechanical Engineering, Lovely
Professional University, India)
1(Mechanical Engineering Department, Thapar
University, India)
2(Mechanical Engineering Department, Thapar
University, India)
1 (P.G. Student, Department of Mechanical
Engineering, Punjabi University, Patiala)
2 (Department of Mechanical Engineering, Baba
Banda Singh Bahadur Engineering College,
Fatehgarh Sahib) (Punjab)
3(Department of Mechanical Engineering, Punjabi
University, Patiala.)
Numerical Model to Estimate the
Thermophysical Properties of
Oxygen at Critical Pressure to be
Used in SMES
An Experimental and CFD analysis
of Nanofluid Based Parabolic Solar
Collector
Evaluation of Free Vibration
Characteristics of Cantilever Beams
Made From Different Materials
AETM’15