Adding the SolidNetWork License Server Information to SOLIDWORKS Enterprise PDM Administration SOLIDWORKS Enterprise PDM 2015 now uses the SOLIDWORKS SolidNetWork License Server to distribute Enterprise PDM licenses. This guide provides a step-by-step process for adding the SOLIDWORKS SolidNetWork License Server information to an Enterprise PDM Client to obtain a license. Note: These steps are applicable for upgrades or new installation of Enterprise PDM 2015. Perquisites Install Enterprise PDM Client Install and activate the Enterprise PDM license in the SolidNetWork License Manager and ensure that the network is properly setup for the Enterprise PDM Client to obtain a license. o For instructions on how to Install or setup your SolidNetWork License Manager to administer your Enterprise PDM licenses, please read our Knowledge Base article: How to Add SOLIDWORKS Enterprise PDM Serial Number to SolidNetWork License The Process 1. Open the Enterprise PDM Administration tool a. Start > All Programs >SOLIDWORKS Enterprise PDM> Administration 2. Form the Administration tool, find your vault and log in. 3. Double click on License 4. Once the Set License window opens, under the Server List tab, click on Add... 5. Enter the port and server name to add it to the server list. For example, 25734@MyServerName 6. Click OK. 7. You can add multiple licensing server if applicable. 8. When done, ensure the license server information entered is in the server list. Click OK. In upgrades to Enterprise PDM 2015 from 2014 or older, connect to the licensing server with the steps above in the first upgraded client. Then, the subsequent upgraded clients will automatically contain the license server information entered. Otherwise, click Exit on the Enterprise PDM icon in system tray of the upgraded clients. This will refresh the license server information entered once the user tries to log in. 888.688.3234 | GOENGINEER.COM
© Copyright 2024