1. home and garden
2. home improvement and repair
3. power tools

TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 1
This is the most current list of sawmill equipment for sale. This service is simple and straightforward. Buyers purchase directly from the
sellers and the sellers pay our fee. Please let us know if you are interested in any of this equipment or if you want to receive monthly
mailings. Also, please let us know if you have any equipment for sale.
Call 800-459-2148 and ask for Linda
Write Linda at P. O. Box 710930, Houston, TX 77271-0930
SAWMILL EXCHANGE is mailed monthly FREE OF CHARGE anywhere in North America
Please let us know if you would like a subscription
Call 800-459-2148
Band Sawmills
STATE
AD #
Ohio
16085
Band Mill Tools
Kent band wheel crowning tool
$1,800.00
STATE
AD #
Ohio
16558
STATE
AD #
Band Sawmills, Complete Operations
PRICE (U.S.)
Alabama
15745
Sawmill Operation: 2001 Wood-Mizer LT40HDG42 Super Hydraulic, 42 HP Kubota diesel
engine, remote operator station with Accuset, debarker, trailer package, 15' 2-strand live
deck with stop & load, Moon's automatic sharpener with built in setter 220V. 2-saw 2" x 24"
edger, 25 HP 3-phase. Tannewiitz single head vertical band resaw, 16"x 3" with hydraulics,
16"x 16" or more capacity without hydraulics, Pineiro 4-sided planer 8"x12" capacity, 7.5 HP
motors, sawdust blowers with piping, 25 HP 3-phase, includings tooling for plaing, tongue &
groove, log siding, over a dozen more applications. Wood-fired dry kiln, various roller beds,
dust troughs, other transfers and decking.
$55,000.00
Alabama
7799
Dimension mill: Esterer sash gang, 40 extra 6" blades, Miner 4"x32" 3-saw edger, vibrating
conveyor, 20' end trim, 100' bark conveyor, infeed & outfeed rolls. Electric power on edger.
Detroit runs everything else. 10-12 man operation.
$120,000.00
8047
Sawmill operation: E. Povlsen 5" high production double cut bandmill, 36"x42" throat
capacity, fully hydraulic, 50 HP electric, live infeed, 50’ bed with forward and reverse,
Omron PLC computer setworks, stationary operator s position, 2 adjusting log turners, 2
timber turners, 3 air kickers, blade lubrication system, log/timber kickers, 3 leveling arms, 5
- 24 adjustable backstays, extra 5" bands, electric and air controls, Plexiglas sawdust screen,
33’ x 24" 12 roller powered outfeed roll case with integrated lifting arms. Easy to breakdown
and load.
$55,000.00
15351
Sawmill operation: Breezewood, hydraulic feed, hydraulic up/down, 38 HP Kubota diesel
engine, 100 extra bands, operator seat, track extended to 46' length for log home work.
Handles logs up to 30" diameter. Set up stationary. All locally available parts. Edmiston 4" x
24" 2-saw edger, split blades, I movable blade, extra set of blades, 70 HP Isuzu diesel engine.
Looks and runs like new. Morgan 24" chop saw, 4 stops, currently hooked up for hydraulic
power off the edger. Will sell with or without hydraulics. 30' belt conveyor, 10" width,
currently using for slab recovery, hydraulics included. Two 15" x 10' gravity lumber rolls
with stands.
$26,500.00
Complete Band Sawmill Operation - Available by the end of March 2015 Smicksburg Upright
Band Sawmill with new 30" Cooks wheels. Bands are 18'4" long and 1 1/2 " wide. 4 Head
block carriage - 14' all steel. 48" Meadows edger, 2 split saw edger. 8' line shaft with pulleys,
10' line shaft with pulleys, 38' conveyor, 4' wide, all steel with gear box. Frick Slab Saw 4
16546
sets of rolls that are approx 18-20" wide X 10-12' long. Cooks Band Sharpener with new
Updated
Cooks band roller used 2 times. 371 Detroit diesel engine, 3 cyl, 100 HP. Good condition.
Banding cart with banding tools 30' of 8" blower pipe, 30' of 6" blower pipe. 24" Blower, 18"
Blower. Mudsaw with 4 jackshaft and belts. Fuel tank - 200 gal. 1 can't hook 60' Skidway, in
3 sections. 40' is steel I beams, 20' is wooden. Equipment operates daily.
$25,000.00
Complete sawmill operation: Morbark rosserhead debarker, 50 HP 3-phase electric 575V,
loaded by Patrick 14,000# wheel loader with 4' articulating arm, bucket and log forks, log
kicker sends log to 20' 2-strand infeed deck with stop & load, 2005 Heartwood Model 310,
70 HP 3-phase electric 575V, 10 HP on hydraulics, includes 25 6" double cut bands, two sets
of 40' of live outfeed rollers, one to Morbark 3-knife chipper with knife grinder, horizontal
feed, bottom discharge to 60' barnsweep, 50 HP 3-phase and the other to Marathon 24P 2" x
24" 2-saw edger with laser sight, 10 HP 3-phase, 20' live rollers to 24" end trimmer on
stationary arbor, live outfeed rollers to greenchain. Mill only operated for 13 months.
$130,000.00
Reduced
British Columbia
Delaware
New York
Ontario
13733
Band Sawmills Plus other Equipment
PRICE (U.S.)
Power Feed for LT28
PRICE (U.S.)
$600.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 2
Vermont
13978
Sawmill operation: HMC Model 206 Hummerhead rosserhead debarker, 12' 4-strand infeed
deck with stop & load and barnsweep, SANBORN Min-Max customized for up to 8" double
cut blades, includes 19 7" serviceable saws, operator cab, SilvaTech setworks, 4 headblocks,
handles logs 30" diameter x 21' length, 50 HP 3-phase power, 25 HP hydraulic power pack,
10 HP Sullair screw-type air compressor with Motivair twin tower air dryer new in 2003,
includes MELLOTT 60' outfeed conveyor. 12' transfer deck 4'-strand with rooftop chain,
leads to HOSMER (HMC) 6"x42" 3-saw bull edger, can add extra blades, 30 HP 3-phase, 16'
outfeed rollcase, 24" width, 6" rollers leads to 4-strand 20' greenchain. PRECISION 48"
3-knife ChipPac, 75 HP 3-phase, dual loading system with vibrating conveyor, sawdust
blower, dust chutes, 5'x5' screens. LAVCOR 42" sawdust blower with cyclone, 25 HP, built
very heavy duty. Everything powered by 3306 CAT genset, 11,000 hours, still in great
condition. Includes all electrical, motor controls, heated air system, and 198. Has been
producing only small logs 12" and smaller and averaging 7,000 board feet daily in grade and
10,000 or more board feet daily in softwoods. Capable of much more daily production with
larger logs and upwards of 300 ties per day.
STATE
AD #
Band Sawmills, Hydraulic
British Columbia
16276
1996 E. Povlsen Sawmill and CASE Terra Loader. Sawmill has fresh paint, very economical
to run. 5 " Double Cut Bands. Fully Hydraulic with ride on head rig, log turner, log leveler,
log dogs, blade guides. Capacity 19' X 36". 4 Cylinder Isuzu Diesel Engine, Tandem Axle
Towing Package. Includes 12 blades, automatic freestanding sharpening system, 1 roll of
banding lumber strap. Low hours - approx 600 on mill. CASE Terra Loader with 2 Wheel
Drive, 4 Cylinder Perkins Engine, Log and Lumber Self Leveling Forks, bucket with fork
pockets for quick change and set of tire chains.
$150,000.00
PRICE (U.S.)
$27,500.00
2002 Timber Harvester 36HTE25, 24' track, fully hydraulic, remote control with 100' cord,
12161
debarker, extra blades, 25 HP 3-phase, around 150 hours. Includes WoodMaster 725 ProPak
Updated
moulder/ripsaw/sander, 100 hours.
$25,000.00
15529
Breezewood, hydraulic feed, hydraulic up/down, 38 HP Kubota diesel engine, 100 extra
bands, operator seat, track extended to 46' length for log home work. Handles logs up to 30"
diameter. Set up stationary. All locally available parts.
$11,500.00
Ghana
16489
SELECT 4221 band sawmill with 115 hp John Deere turbo diesel engine, with complete
hydraulic system and computerized setworks Heavy-Duty Backpost (squaring arms)
Hydraulically driven rollers on tapers Double edge cutting saws Setwork programmer 24'
Log Infeed deck (2 chain) hydraulically driven 12' Outfeed deck (3 chain) continuous - 220V
50 Hz No of hrs – 976.1hrs Country of manufacture: Canada
$90,000.00
Illinois
16595
New
1998 TimberKing B20, fully hydraulic with 10 HP electric motor - 220 V. Includes sharpener
and setter.
$14,000.00
Kentucky
16614
New
2006 Baker stationary electric sawmill with 30 HP 3 phase motor and 15 HP hydraulic
power pack. Capacity 24' X 34", and 4000 bf per day. 1 man set up. Complete computer
setworks. 32" band wheels, 1 1/2" to 2" bands and approx 19'2" long. Includes 12 V
sharpener that sharpens blades without removing them from mill. Includes hydraulic drive
with 4 strand log deck with pack man that plumbs in with mill controls. Approx 500 hours.
$29,500.00
Kentucky
16575
New
Wood-Mizer LT70, 62 HP Cat diesel engine, out feed table, command control station computer set works, Includes a cant pick up to put cant over on resaw, Hydraulic drive
-turner/loader, Power feed, Debarker, Lube system.
$34,500.00
Kentucky
16074
S&W Edger Works Incorporated, S&W 700 Horizontal Band Mill With 75HP Motor, 29 Extra
7" Bands, Hydraulics With 25 HP Motor, Cab & Controls (Computer Set Works), Log Deck,
Barn Sweep. Capacity is 28' X 48" single cut saw.
$35,000.00
Reduced
Louisiana
16334
2010 Cooks MP-32. 30 HP Kohler gas engine, 7 HP Kohler gas engine for hydraulics, trailer
package with spare tire. Many extras: 12 volt head up/down/forward/reverse. Loading Winch
Turner System. Third Squaring Arm. Log Loader Ramps. Metal Cant Hook. Blade Alignment
Tool. Cat Claw Sharpener and Single Tooth Setter. Extra Blades.
$18,900.00
Massachusetts
11736
2003 Wood-Mizer LT70, trailer package, remote operator station with AccuSet, outfeed
table, 10 boxes of bands, many extra parts and components, new Cat 62 HP diesel motor,
5000 hours on the mill, 800 hours on the new motor. Regular maintenance. Running daily.
Can see in operation.
$35,000.00
Reduced
Michigan
16601
New
Woodland K-6 Band Mill with 30" Cook Band wheels with Cook Bearings, 2" blade, 40 HP
electric motor, edger with 75 HP. Includes all electric panels, starters, set works and extra 4"
band head.
$12,000.00
Michigan
9971
1990 Sanborn Min-Max, 4" to 6" single cut, fully hydraulic, 50 HP 3-phase, 4 bunks, 18'
carriage, computer setworks, 16' live 3-strand infeed deck, board kicker, live outfeed.
Includes extra bands, Armstrong #2LH grinder w/swaging tools and tensioner.
$52,000.00
Reduced
Missouri
16508
S & W Model 125 with 30 HP 3 phase electric motor. Includes hydraulic dogs and log turner,
electric setworks with 4 presets. Capacity is 20' X 32", single cut saw. Out of service for 2
years and electronics covered under tarp.
$12,000.00
Connecticut
Delaware
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 3
Missouri
16126
Keenerbuilt Band Sawmill: Hydraulic, 15 HP Kohler gas engine, sharpener, Capacity 30" x
16'
$6,000.00
Montana
11598
1996 Cutting Edge, automatic up/down, automatic feed, 22 HP Briggs & Stratton Vanguard
gas engine, extra bands, DynaSaw manual sharpener with manual setter, 36" diameter x 26'
length. Original owner. 265 hours. Set up stationary.
$10,000.00
Reduced
New Hampshire
15862
1987 Sanborn Min-Max, fully hydraulic, 25 hp Kohler gas engine, factory trailer package,
hydraulic log turners and log dogs, board kicker, debarker, extra 5" blades. Has capacity to
handle 36" diameter logs 4-24 feet long. Log cleaner. Oil Motor drive, 8"0 inserted tooth saw.
Log cleaner reqires 15 GPM included, Extra headblock including connecting chain and
combination Board dog, hand operated, Taper attachment per head. Kept in excellent
condition. Can see running.
$20,000.00
Reduced
New York
16590
New
2014 Wood-Mizer LT 40HDG26. Hydraulic log loader and log turner. Power feed. 26 HP
Kohler gas engine. Computer setworks. Trailer package. Capacity is 36" X 21'. Includes
Debarker and extra bands. Under warranty. 100 hrs.
$28,600.00
2012 TimberKing 2000. Fully hydraulic with log loader, log turner, 3 log stops, and
16573
front/rear toe boards, computer setworks. 38 HP Kohler gas engine. Full trailer package
Updated
with electric brakes. Capacity is 38" X 20'. 86 hours.
$30,000.00
New York
2002 Wood-Mizer LT40 Super Hydraulic. Portable with Debarker and Computer Setworks,
wood-mizer sharpener and tooth setter. 50 extra bands. 40 HP Lombardini diseal engine.
2012 Wood-Mizer Edger with 28 HP Kohler gas engine. 2 blades. Capacity 2" thick X 18"
wide.
$25,500.00
Ohio
TimberKing 2200. Portable, fully hydraulic with Hydraulic Chain Drive Cutting Head,
Hydraulic Log Loader, High-speed hydraulic dogging system, Hydraulic Chain Log Turner,
16447
Hydraulic Roller Toe Boards. 39" Capacity, 33" Cutting Throat X 24'. Computer setworks.
Updated
Debarker, board drawback system. Includes automatic blade sharpener and dual tooth
setter. Approx 500 hours. In warranty til June 2016.
$39,000.00
Ohio
Silva Saw Model 30 Hydraulic Band Mill. 20 HP Kohler gas engine for mill and 3 HP Briggs
& Stratton for hydraulics. Includes sharpener and setter with extra used blades, trailer
package with hitch and axle and original tires. Capacity is 20' length X 30" dia (does better
with smaller diameter log). 600 hours. Regularly maintained when in operation. Last ran
about 5 years ago. Stored inside or covered.
$10,000.00
Ohio
Ohio
16593
New
16609
New
2014 TimberKing 2000 with 110 hours, 38 HP Kohler gas engine, Super Hydraulic with log
16538
lift, log turner, log dogs. Computer setworks, trailer package. Capacity is 21' X 36". Includes
Updated
10 new Super Sharp brand blades
$31,500.00
Ohio
16511
2003 Wood-Mizer LT300, Industrial Mill. 3 phase electric. Capacity is 20' X 36".
$39,000.00
Ontario
15533
1996 Wood-Mizer LT30HDE25 Super Hydraulic, 25 hp 3-phase 575V, debarker, operator
seat, includes 2-strand live deck that feeds into sawmill log loader. Also includes
Wood-Mizer automatic sharpener with manual setter. Always in a building. 7000 hours.
$19,900.00
South Carolina
16228
TimberKing 2000 Fully Hydraulic, 35 HP Kabota Diesel. Computer Setworks, less than 400
hours. Includes setter and sharpener.
$33,000.00
Tennessee
15981
Timber Harvester, hydraulic band mill, log turner, debarker, 3 phase power
$16,000.00
Tennessee
16427
2000 LogMaster LM5, fully hydraulic with leveler and log turner. 85 HP Cummins diesel
engine. Capacity 36" X 24'. Portable, mounted on a trailer. 1482 hours.
$24,500.00
Tennessee
16306
1998 S & W model 125, fully hydraulic mill. Includes 30 HP electric motor and complete
with set works. Capacity 21' X 25". Many updates with air bag blade tensioner, latest
version of hydraulic stops and dogs, new retrofitted roller guide assembly and dual super
drip /wipe system blade oiler from cooks. Mill is operated daily. Mill produces between 3500
- 5000 board feet per 7 to 8 hour work day, depending on log conditions.
$20,000.00
West Virginia
16535
Wood-Mizer 2002 LT40 with hydraulic log loader and debarker (added to original LT 40),
manual log turner, manual dogs. 26 HP Kohler. 1800 hours. Power up/down/forward/reverse.
Capacity 36" X 21'. Trailer package.
$15,000.00
Wisconsin
15243
Custom built band sawmill, automatic feed, hydraulic log turner, hydraulic log clamps,
hydraulic toe boards, winch up/down, 35 HP Wisconsin VH4D gas engine, 20" band wheels.
Set up stationary. Handles logs 24" diameter x 24' length. Only 30 hours.
$10,500.00
STATE
AD #
Band Sawmills, Manual
PRICE (U.S.)
California
16218
2002 Baker EZ mill, 16 HP Briggs & Stratton gas engine, cuts 20" diameter x 24' length.
Approx 100 hours. Original owner. Can demonstrate. Price firm.
Illinois
16587
New
Hud-Son HFE 36 Manual Band Sawmill. Capacity 36" X 20' with 6' extension. 16 HP Briggs
& Stratton gas engine. Blade size is 13'11". Portable.
$4,500.00
Illinois
16320
2014 TimberKing 1220. 18 HP Vanguard engine, 150 hours, Extra blades, Under warranty.
No trailer package. 6' Extension available for $900. With extension capacity is 18'. Mill with
extension is $8800.00. Mill alone is $7900.00
$7,900.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$4,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 4
Illinois
14569
Shop-built light duty band sawmill head assembly, designed to saw without a track. The
14"-wide saw head is mounted in a free-rolling 30" long frame with 4 casters, and has a 6.5
hp gas motor, 12" bandwheels, runs 1" bands, and saws logs from 12" to 20" diameter. The
log sets on two 30" long 6"x8" cants which must be placed on a flat surface. One log clamp
and one small log stop are bolted into each cants.
Kentucky
16607
New
2005 Wood-Mizer LT40, with 28 HP Kohler gas engine. Hydraulic log loader was added to
original machine. Power feed. Debarker. Capacity 36" dia X 21' length. Approx 2000 hours.
Trailer package. Approx 30 extra bands. Regularly maintained and in good condition.
$12,500.00
Minnesota
16577
New
Custom Built Sawmill. 13 HP Honda gas engine. 14' blades, 1 1/4" wide. Capacity is 20' X
24". Can be disassembled to be hauled on truck. Easy feed mill. Includes extra used blades.
$3,900.00
North Carolina
16324
Wood-Mizer LT30 with 18 HP Kohler gas engine, 16' bed, trailer and box of extra bands. All
manual but has power feed and power setworks.
$7,000.00
Oregon
16494
Mini Mite Mill with electric and VW motor. Includes 2 hydraulic log holding decks.
$6,000.00
Pennsylvania
16292
Simplicity Bandsaw with 18 HP Briggs & Stratton/Vanguard engine, trailer package, vinyl
cover, 8' extension. Capacity 30" X 16'6". Includes 30 extra bands.
$4,750.00
STATE
AD #
Band Sawmills, Upright Band Sawmills
PRICE (U.S.)
Arkansas
11310
8' Prescott upright band sawmill, motorized strain and guides, includes three 11" bands. No
power.
$16,000.00
British Columbia
15706
Jonsered 30" upright band headrig, 10HP, new rubber on balanced wheels, shingle making
capability, includes sliding table and air sets. Easy to breakdown and load.
$4,500.00
New York
Complete Band Sawmill Operation - Available by the end of March 2015 Smicksburg Upright
Band Sawmill with new 30" Cooks wheels. Bands are 18'4" long and 1 1/2 " wide. 4 Head
block carriage - 14' all steel. 48" Meadows edger, 2 split saw edger. 8' line shaft with pulleys,
10' line shaft with pulleys, 38' conveyor, 4' wide, all steel with gear box. Frick Slab Saw 4
16545
sets of rolls that are approx 18-20" wide X 10-12' long. Cooks Band Sharpener with new
Updated
Cooks band roller used 2 times. 371 Detroit diesel engine, 3 cyl, 100 HP. Good condition.
Banding cart with banding tools 30' of 8" blower pipe, 30' of 6" blower pipe. 24" Blower, 18"
Blower. Mudsaw with 4 jackshaft and belts. Fuel tank - 200 gal. 1 can't hook 60' Skidway, in
3 sections. 40' is steel I beams, 20' is wooden. Equipment operates daily.
$1,550.00
$25,000.00
New York
16507
Vertical Band Sawmill with a Frick Carriage, approximately 15-18 extra bands, sharpener
and setter, 2 saw edger, 6 cyl Case engine with approx 160 HP.
$21,500.00
Pennsylvania
15959
1999 Woodland Pro 4000. 3 phase electric motor, fully hydraulic with automatic setworks, 1
extra set of blades, built in edger. Good condition.
$10,000.00
Reduced
14027
54" upright bandsaw on Lane 16' right hand automatic carriage, 10" double cut blades, 7"
single cut blades, electric tensioning, 4 double headblocks with taper on each, Lane controls,
Silvatech setworks (with owners manual), joystick controls, Tyrone Berry feed works,
sawyers cab, log turner. Excellent condition.
$59,000.00
Reduced
Wisconsin
15969
Heavy duty shop built upright band mill, 36" wheels, 2" band, Howell set works and
headblocks, 8' carriage with 2 headblocks plus 8' pup with 1 moveable headblock, Hand set,
right hand, hydraulic blade tensioning, cuts 22 +" wide and 26' long. Built in sawdust blower.
Requires very little maintenance.
$16,000.00
STATE
AD #
Band Sawmills, Wide Capacity
PRICE (U.S.)
12715
2006 Dynatech 60" wide capacity band sawmill, 12 volt up/down, hydraulic double chain
feed, hydraulic chain log turner, hydraulic clamps, hydraulic toe boards, saws logs up to 60"
width x 20' length, 6 HP Honda hydraulic power unit, runs 1 1/2" to 2" bands. No power.
Original owner. Very low hours.
$24,000.00
Reduced
Quebec
Indiana
Oregon
16464 2013 Hud-Son Oscar 52. 35 HP Vanguard gas engine with new drive clutch. Includes
Updated sharpener, 8 standard bands and 2 - 2" bands/blades. Excellent condition, only 15 hours.
$20,500.00
Circular Sawmills
STATE
AD #
Bolters
Illinois
16025
Bolter Mill 52" circular saw, hydraulic drive for carriage, pneumatic end dogging system.
Capacity 4' X 24" . No power. Good condition.
$6,600.00
Vermont
14926
J.W. Penney bolter mill, 40" inserted tooth headsaw with 24" inserted tooth top saw, 75 HP
on main saw, 50 HP on top saw, all hydraulic, single pedal drive, outfeed belt, grinder, extra
main saw, extra top saw. Under cover. Can see runnng. M attison 202 straight line ripsaw,
variable speed feed, new track and chain. Rips up to 4" depth and 36" width. Can see
running. Pull-down chop saw, 14" blade, 4' table, 3-phase power. Whirlwind sawdust blower,
8" intake, 6" outlet, at least 40' of heavy plastic piping, 15 HP 3-phase. Includes all electrical
panels, switches, disconnects. Will saw 8 - 8/5 feet comfortably. Can saw up to 9 '.
$6,000.00
Reduced
STATE
AD #
Circular Sawmills, 1 - 2 Man
PRICE (U.S.)
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 5
Alabama
16328
Foley Bell Saw M14. Headmill 48" insert tooth blade Style F with 10' carriage. 18" X 14'
capacity, 30 HP, 3 phase 440 volt. Includes Jones saw grinder and other spare parts. Can see
operating.
$4,000.00
Alaska
15023
1999 Mahoe Minimax 10" x 6" circular sawmill, 32 HP Daihatsu gas engine, includes track
extension to cut up to 25' length, extra saws, grinder, extra belts.
$20,000.00
Georgia
16353
Foley-Belsaw M14 Circular sawmill on a 40' trailer, manual operation, Capacity: 14' long
and can cut up to approx 20" boards as blade is 54" with 60 teeth, the blade is an Atkins
Silversteel. It has two blocks to lock the log down. International U450 engine - good running
condition. Buyer must provide tires and rims to make mill portable. Includes hoist to load
logs (needs chain) and tools to manually sharpen and replace teeth.
$4,000.00
Idaho
16586
New
Lucas Model 613 with low hours. It has extensions to get up to 22 foot long lumber. There
are extra carbide tips and soldering rods to install them, manual, dvd and VHS
$6,500.00
Indiana
Iowa
15919 Lucas Mill 8-25. Low hours with extension and slabbing attachment, extra bar, about 12
Updated extra chains and extra blades. Can demonstrate.
$20,000.00
16424 Circular Sawmill with 4 head blocks, friction feed, 6 cylinder gas engine with PTO, 50" head
Updated saw, steel carriage, 40' track, steel rollers, sawdust conveyor.
$5,500.00
Louisiana
14207
Mighty Mite 412 series head assembly, blades included. Needs track and power unit. Was
being used as an extra head assembly for another Mighty Mite sawmill.
$4,500.00
Maine
16125
KARA F2000 Stationary Sawmill: 42" saw ins tooth Double Hydraulic Pump Hydraulic size
adjuster Sawdust Blower On line saw sharpener Hydraulic log turner Top saw with electric
brake and 20 HP motor One log dropper Three thin curf saws with 40" stellite dipped
$39,000.00
Michigan
16599
New
Circular Saw Mill with 14' Carthage Carriage, 3 Headblocks, Air Dogs top and bottom,
Sawmill System Precision Electric Set Works, Air and Hydraulic Cab with ac, hand and foot
controls, 56" blade, Mellott Conveyor, 50' Track Heavy Duty Log Turner, and 4 Strand Log
Deck.
$15,000.00
Michigan
Enterprise Sawmill with 2 head blocks and 54" blade. Capacity is 12' length, 32" feed set
16470 works. Hydraulic driven. Continental Industrial Diesel engine - 6 cyl with Rockford power
Updated take off. Includes a chip removal system. Sawmill is mounted on a rolling frame. Good
working condition.
$5,000.00
Montana
16603
New
Lucas 8-25, 25 HP twin Kohler gas engine. Extensions to cut up to 24'. Slabbing attachment.
Seals replaced along with some bearings. New battery. Sharpener. Good condition.
$8,500.00
Oregon
16588
New
912 Mighty Mite Circular Sawmill. Completely refurbished with a new 912 Head Rig. Also
has a LTSD Squaring Deck with Back Stop and Log Turner & Auxilary Pumping Unit, 50HP
Main saw was vverhauled 10/14, 20' Mellot 3 Strand Infeed Log Deck with Stop and Load.
Mill has less than 50 Hrs since it was refurbished. Also includes a sawdust conveyor.
$55,000.00
Oregon
7211
High production 2-man sawmill mounted in custom designed semi trailer, sawing up to 10
mbf daily in cants: 5-strand green chain w/stop & load, Mobile Dimension Model 128
hydrostatic saw head retrofitted w/remote operator station (10 hydraulic, 3 electric
controls), saws 5.5' diameter x 26' length, heavy duty hydraulic dogs & log turner,
4-direction (up/down/left/right) taper. Includes automatic slab outfeed w/ sawdust screen, 8
outriggers w/6 ton jacks. 25 HP on saw, 15 HP edger & hydraulics. 800 hours. Best offer.
Will consider trade for quality backhoe.
$49,000.00
South Carolina
16562
Mobile Dimension Mill on Dual Axel Trailer. All manuel. 47 HP VW gas engeine. Has all
standard features for Mobile Dimension. Good condition and stored inside.
$9,500.00
Tennessee
16047
8-27 Lucas Kohlar Command Gas 27 HP engine. 2004 Model with track extension for 20'
long logs. Tie attachment plus 5 extra blades.
$10,000.00
Washington
16229
Duncan Ironworks 3030 . Hydraulic. 3 phase 50 HP. Capacity 26' length X 8' diameter. Can
cut 12 X 12 in 1 pass. Includes out feed roll case, bits, shanks, grinder.
$24,900.00
2013 Peterson WPF 8” swingblade sawmill. 30 HP Kohler engine with less than 70 hours.
Includes lo/lo frame, rails in excellent condition. Peterson original 21” circle blades. Clip-on
16529
wide 6’ slabber accessory with bar and 3 chains. Planer head attachment allows machine to
Updated
be used flattening wide slabs of any size. Have 16’ Aluma trailer for transport will sell for
$1800 if desired.
$18,000.00
Wisconsin
STATE
AD #
Circular Sawmills, Automatic
Alaska
13853
Salem tie mill, automatic, computer setworks needs to be replaced, portable on dual axle
trailer, 2 headblocks, air dogs need replacing, 12' carriage, operator cab, offbearer belt, no
power.
$30,000.00
Alaska
6591
01C Frick, Helle automatic setworks, Renco 6" vertical edger, Mellott cab w/heat, tapers, 4
headblocks, 15' carriage. 275 HP 671 Detroit power.
$20,000.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 6
Alberta
Circular Sawmill: Economizer Small Log Mill. Cuts rough logs < 10" diameter. 4 chipper
heads - belt driven set with hydraulic. Capacity for cants is 2" X 2" to 6" X 6". 230 HP 6 cyl
16492 Perkins diesel c/w air and hydraulics. Automatic in feed system. Powered out feed. 400
Updated hours for mill. 200 hours on diesel. Mounted on rectangle tube trailer c/w 2 x 7000# axles.
Powerful blower located in mill shrouding and air compressor with reservoir located in
frame. Extra heads and chipper knives. Good condition. $60,000.00 Canadian
$60,000.00
British Columbia
Morbark 30" automatic mill, right hand, live infeed deck with stop & load, sawyer's cab, 3
13654
headblocks, rebuilt 16' carriage, two 52" inserted tooth headsaws, Cummins 60 HP diesel
Updated
power unit, two 100 HP 600V electric motors and two hydraulic pumps.
$95,000.00
12924
SALEM 42" automatic mill, right hand, all steel, 40,000 lbs., adjustable track, 150 HP
3-phase 575V, Tyrone Berry hydraulic feedworks 100 HP, 2 headblocks, 8' carriage, saw cab
with computer setworks and controls, 56" headsaw, 4-strand live deck with stop & load,
sawdust and wastewood chain with Radicon drive, outfeed conveyor. MORBARK 40"
rosserhead debarker with bucksaw on Fruehauf trailer, 3-strand infeed deck, 4-strand
outfeed transfer rollcase. This debarker was debarking 75,000 bf per shift when taken out of
service. All electrical included along with a variety of conveyors, transfers and decking. Will
separate.
California (Central)
15359
Morbark MorPack with topsaw and Meadows 2-saw vertical edger, right hand, portable on
factory axle, 20' 4-strand infeed with stop & load, 4 headblocks, 14' carriage, 54" headsaw, 2
extra 36" topsaws, 2 extra edger saws, 150 HP 3-phase on headsaw, 50 HP 3-phase on
topsaw, 50 HP on vertical edger, operator cab, computer setworks, tooth grinder, changing
tools, 1000 extra teeth, 36" x 24' long outfeed rolls with lumber stop and lumber kickers, 30' $325,000.00
sawdust conveyor and 30' barnsweep, 50' 4-strand greenchain, Morbark 56" 3-knife chipper,
20' infeed, top discharge, includes knife grinder and Babbitt pot, 150 HP 3-phase. All
transfers and decking run by hydraulics, powered by 100 HP hydraulic power pack with 100
gal. fuel tank. All electrical and disconnects included.
California (Central)
13465
01 Frick, automatic modular mill, 2-saw vertical edger, 40" topsaw, Mellott chain log turner,
Tyrone Berry feedworks, 3 headblock, 15' carriage, 3 strand infeed deck with stop & load,
sawyer's cab, 60" headsaw, 80' roll case, 4 strand green chain, 200 HP 3-phase power.
$37,500.00
15958
American Lumber 2 sawmill. Has been producing for past 35 years. 20' carriage, 60' track
set up in 20' sections (that can be taken apart), Frame is set up with 8" channel iron frame.
There are 2 48" saw blades: 1 Stahl 3, 8-9 gauge; 1 Stahl B, 8-9 gauge. Cat D4600 power
unit (diesel). Corly 3 saw edger that is powered by case power unit.
$30,000.00
14167
Corinth American, automatic, right hand, designed for long timbers with 36' carriage and
95' track, 6 headblocks, 56" headsaw, sawyer cab, Corinth hydraulic bar-type log turner,
Corinth automatic cable tensioner, 8" collar on the husk, 3 7/16" mandrel, very good
condition, built extra heavy duty with 8x8 tubing frame on the carriage, 200 HP 3-phase
480V.
$40,000.00
Kansas
16356
1997 Edmiston Hydraulic Circular Sawmill. Last operated in June 2014 and ready to load
and go. Mill is complete. Log capacity: 36" x 16', Computer setworks, 55' Track, Stop and
load log deck, Chain log turner, 20' Outfeed rolls, (2) 30" Top saws, (3) 56" Bottom Saws,
125 HP Electric Motor. Includes Vertical edger with (3) blades (all moveable) and 50 HP
Motor
$50,000.00
Maine
14035
Jackson Lumber Harvester, automatic, right hand, 3-strand live infeed deck with stop & load,
3 headblocks, 12' carriage, hydraulic log turner, 3 blades around 56" each, 100 HP 3-phase
power. Disassembled and ready to transport. Was running fine when removed from service.
$10,000.00
Reduced
Massachusetts
13979
Cardinal automatic sawmill, electric over hydraulic, right hand, 20' 3-strand infeed deck,
hydraulic variable speed feed, hydraulic 12' carriage, 3 headblocks with hydraulic dogs, last
cut down to 2", 52" inserted tooth headsaw, hydraulic 198, 3208 Cat diesel power unit.
$18,500.00
Massachusetts
8719
Sanborn 42" automatic circular sawmill, right hand, all steel, hydraulic shotgun feed, 16'
carriage, 4 headblocks, pantograph, complete topsaw assembly with 30 HP 3-phase motor.
No headsaw or topsaw blades. Some 3-phase motors available. Nearly $200,000.00 new.
$45,000.00
13296
1985 Edmiston automatic mill, right hand, 4 headblocks, 4 automatic dogs, 16' carriage, saw
cab, 3-strand 18' log deck, 150 HP 3-phase electric. No blade. Completely factory
refurbished. Includes Morbark 48" 3-knife chipper, horizontal feed, top discharge, 150 HP
3-phase electric. All electrical with starters and wall panel included. Also includes extra
parts and components.
$32,500.00
10226
Frick ST36 automatic sawmill, right hand, Edmiston vertical edger with new 20" blades,
mandrel and collars, saw cab w/controls, Allen Bradley hydraulic setworks, 3 headblocks,
15' carriage, Frick log turner, new mandrel and bearings, 56" headsaw,25' live outfeed rolls,
200 HP 3-phase power, 50 HP hydrostatic drive. All electrical included. Everything in
excellent condition. Also includes two 56" headsaws, hammered for right hand.
$30,750.00
British Columbia
Colorado
Illinois
North Carolina
Ohio
Ontario
12576 2002 KARA Master with top saw, 16' 3-strand live deck with stop & load, 5 blades and
Updated Simonds 48" insert tooth saw, complete hammering room.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$75,000.00
$55,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 7
Hartzell 45" heavy duty mill modular mill with vertical edger, 30" topsaw, steel frame,
sawyer's cab, live deck with stop & load, 3 headblocks, one movable, Silvatech setworks, 18'
carriage, hydraulic carriage drive, chain log turner, laser lights on headsaw and edger, 52"
headsaw, grinder, live outfeed conveyor, 150 HP 3-phase 575V, includes many extras.
$58,500.00
Complete sawmill operation: Custom built 48" automatic sawmill with 42" head saw, 42" top
saw and 3-saw vertical edger, right hand, all steel, 3-strand live in feed deck with stop &
load and forward and reverse, 3-head blocks with air dogs, 14' carriage, metric and standard
12213 dial, dual-direction air drums, live out feed rolls and lumber decks, sawdust chain leads to
Updated 25' barn sweep, 3-phase 480 V, most electrical available. Custom built 24" chop saw, air
feed, foot petal controls, handles up to 8" cants. 12" x 12" single head band resaw with live
feed rollers, air hold downs, no return, 50 HP 3-phase, Morbark hammer mill, 16 knives,
handles up to 6" material. Complete electrical room with panels, breakers, etc.
$30,000.00
16274
Meadows All Steel Portable Sawmill 40' Bed and Track. 3 Headblock Carriage. Handsets
with Dogs 40" opening with number wheel. 52" Simonds Headsaw Blade - F style. Mellott
Log Turner. Mellott Hydraulic System. 25' 2 Strand Deck. 26" Cornell blower with 10 HP
motor and starter. 4 Cylinder Detroit Power Unit with Rockford Clutch Pak, 50 Gal Fuel
Tank, 1000 hours on overhaul. 40' Dead Rolls. Swing type Cutoff Saw with 30" carbide blade.
7 1/2 HP motor and starter. 24' Firewood Conveyor with 2 HP electric motor and starter. 40'
Track with Lumber Buggy. Mill can be seen operating. This is same as ad #16275.
$22,000.00
14935
Sawmill Operation: 40" CLEREMAN carriage with top saw, automatic, electric over air, right
hand, 40 3-strand log deck with stop & load, 3 headblocks, 16' carriage, sawyer cab, Tyrone
Berry feedworks, two 56" headsaws, 36" top saw, Mellott hydraulic log turner, 36" sawdust
blower, SCHURMAN 6" x 36" combination gang edger/board edger, laser lights, at extra
saws and spacers, infeed and outfeed decks, 36" sawdust blower, 150 HP 3-phase power.
CORNELL automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.
MELLOTT 40' vibrating infeed conveyor, 40' 3-strand GREENCHAIN, includes all electrical
with starters. Averaging 15,000 bf grade per shift in 5/4 and 6/4.
$78,000.00
South Carolina
CMC automatic mill with vertical edger, right hand, saw cab with a/c, 3 headblocks, 14'
carriage, 50" inserted tooth headsaw, includes 12' 4-strand live infeed deck with stop & load,
16077
20' outfeed lumber rollers which leads to 4-strand 10.5'x12' greenchain with 2 HP single
Updated
phase motor with reverse switch, 671 Detroit diesel power, CORNELL end-trimmer, 18"
blades, 16' capacity, with 12' continuous-feed infeed chain, 7 HP 3-phase.
$40,000.00
Reduced
South Carolina
10438
Complete hardwood sawmill: Fulghum 24' rosserhead debarker with live deck and bark
conveyor, #1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20'
carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive
assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP
Westinghouse 3-phase electric motor. Carriage needs some work. Includes 21' 3-strand live
deck, 26" sawdust blower, sawdust conveyor, slab belt. Corley 8" x 60" Combination Gang
Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good
condition. Includes jump chain to edger, 12" infeed rolls, 60" 9' outfeed tailing belt conveyor,
3-strand 9' rooftop chain to trimmer, 19' deadroll conveyor to resaw, 30' slab conveyor,
sawdust conveyor. Includes 3-strand 45' separation deck/green chain, 25' block conveyor,
sawdust conveyor. 48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Includes
5' screen and Phelps loading system. All electrical, starters, cables included. Complete set of
transfers, decking and 198. Many extras.
$48,000.00
Reduced
Tennessee
16112
This is a great mill for tie or grade lumber production. It is still fully operational. HMC AC40
3-headblock automatic mill with setworks, Tyrone-Berry feed, 150hp 3-phase 480v power, 56”
Simonds Circle Saw (3 total saws, all in excellent condition, no shoulder work), HMC 21’
4-strand log deck with stop and load, HMC log turner, Mellot offbearing belt, 28’ outfeed
belt conveyor, husk frame, Mandrel shaft is two-part with flex coupler (Mandrel shaft and
bearings were all replaced 1 year ago), dust chain for edger and head saw.
$35,000.00
Tennessee
15979
Automatic circle mill with 4 headblocks, 16' carriage, HMC, fully automatic, log turner, 3
phase power, drives included
$22,000.00
Reduced
Ontario
Oregon
Pennsylvania
Pennsylvania
Texas
Wisconsin
13313
Windham Automatic Circular Sawmill - Custom Made/353 Detroit/Prentice Hydraulics/3
Stage Pump. All Steel, 2 Headblocks. 11' Carriage, Track is 42' long x 40" wide. Includes:
16198 Hydraulic Feed Works, Hydraulic Log Turner, Hydraulic Log Deck - 6' wide x 18' long.
Updated Vertical 4 blade edger with 4 F pattern inserted tooth saws/3' wide, cuts 4" thick. 56" F
pattern inserted tooth saw (low hours). 95' dust chain under mill from edger to upright dust
chain - does not include power. 4 sets Roller Beds. 671 Detroit pulls both saw and edger.
16349
Custom built sawmill using Frick sawmill as foundation. Built heavy duty. Includes 12 Volt
Hydraulic drive over hydraulic dogs, flippers, and set works. 3 head blocks, 44' track, 3 - 56"
F style blades, 300 HP Cummins diesel engine. Averages 11500 bf per day depending on
conditions.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$25,000.00
$16,700.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 8
Wendt circular sawmill, mid 90's. electric over hydraulic, 4 presets, dual controls, 48"
headsaw, clearance for 56" saw, 4 headblocks-3 live, 31" opening, 12' carriage, 44' track,
live deck w/stop&load, chain type log turner, sawdust chain, no power. Sawed less than
10,000 ft. Always under cover.
Wisconsin
3327
STATE
AD #
Circular Sawmills, Complete Operation
PRICE (U.S.)
British Columbia
15414
Complete sawmill operation: Automatic circular mill with topsaw and saw cab, right hand, 3
headblock 14’ carriage, Salem setworks, dogs, and carriage drive, 50’ track and frame,
Sawyers open cab, 56" inserted tooth headsaw, 28" topsaw, 150 HP Allis Chalmers 480v
motor, 4-strand log deck, log turner, 5 strand 13ft x 20ft transfer deck to 8" combination
gang- edger with hydraulic setworks, Balder Super ‘E’ 200 HP 575v motor, 23" trim/hula
saw 7.5hp 460v, 4 strand 70’ x 14’ greenchain. Brunette 48" 6 knife chipper 100HP 480v
motor. All electrical included along with a variety of clean out chains and waste conveyors,
transfers and decking.
$50,000.00
Reduced
Canada
15961
Circle sawmill with manual carriage 30" X 12', 48" headrig. Edger 2" - 12" wide, powered by
300 HP Mac engine (diesel). Band resaw. Building 20' wide X 60' length includes all
lighting/electrical.
$28,900.00
11906
Sawmill operation: EDMISTON 40" automatic mill, portable, right hand, 4 headblock 16'
carriage, hammer dog, hydraulic setworks, dogs, and carriage drive, 60'+ track frame,
Sawyer's cab, husk frame with 54" inserted tooth blade, 25' 3-strand live log deck to mill
with stop-n-loader, Edmiston Log turner, sawdust chain; 40' main mill roll-case, chain
transfer to VANCE 8" x 40" combination gang-edger with hydraulic setworks, 30' 4-strand
lumber deck with rooftop chain, 35' 4-strand green chain, 30' Roll-case at end of green chain,
50' slab conveyor belt. CAT 400 HP Diesel power units runs the sawmill and edger.
MORBARK 640 rosserhead debarker with 25' 4-stand live infeed deck and extra long (36')
out-feed. MORBARK 48" ChipPak with screen, 15HP electric motor and blower, waste
conveyors, motor control center. Includes electrical disconnects and starters. Everything in
very good condition.
$90,000.00
14066
Complete operating sawmill, Lane #1, right hand, Glover feedworks, 5 headblocks, 21’
carriage, foot receder, 48" inserted tooth headsaw, sawdust blower. Frick 4"x22" 2-saw
edger, both powered by 471 Detroit diesel engine, 20" trim saw, handles material 8" width
and 3" depth, 3-phase power. 3 HP industrial shaper with knives for making raised panel
doors, T&G of 1/2" and 3/8", $300 in knives included. Includes many spare parts, numerous
V-belts, bearings, and sprockets. Everything in fine working condition. Want everything off
the property. Reduced for quick sale.
$15,000.00
Reduced
13920
Sawmill operation: MORBARK rosserhead debarker with 3-strand 24' log deck, debarker
handles logs 6" to 40" diameter, carbide cutter head, 50 HP on the headsaw and 25 HP runs
hydraulics, 60' outfeed bark conveyor, log kicker to live outfeed conveyor to HELLE
automatic mill, right hand, push-button electric setworks, saw cab, 3 headblocks, 12'
carriage, hydraulic log turner, several sawblades 54" to 56", live outfeed conveyor, cants to
$250,000.00
100' of green chain, boards to 6" BULL EDGER, using 2 to 7 blades, 40 HP 3-phase, slabs
removed from outfeed conveyor by kicker to FULGHUM 48"whole log 6-knife chipper, 75 HP
3-phase 460v, 10 HP air compressor. PATZ barnsweep 100' sawdust conveyor. 10,000 to
15,000 bf daily production. All electrical included with electrical panels.
16275
Meadows All Steel Portable Sawmill 40' Bed and Track. 3 Headblock Carriage. Handsets
with Dogs 40" opening with number wheel. 52" Simonds Headsaw Blade - F style. Mellott
Log Turner. Mellott Hydraulic System. 25' 2 Strand Deck. 26" Cornell blower with 10 HP
motor and starter. 4 Cylinder Detroit Power Unit with Rockford Clutch Pak, 50 Gal Fuel
Tank, 1000 hours on overhaul. 40' Dead Rolls. Swing type Cutoff Saw with 30" carbide blade.
7 1/2 HP motor and starter. 24' Firewood Conveyor with 2 HP electric motor and starter. 40'
Track with Lumber Buggy. Mill can be seen operating. This same as ad#16274.
16165
Hurdle Sawmill with many labor saving devices. The mill has not been run in over 5 years. It
is mostly steel. It has live decks, air compressors, 54' FH head saw, bark conveyers, sawdust
chain, slab conveyers, belts and all electric switch boxes and wire. Mill is on wheels and can
be pulled. Deck is 3 strand and 44' long and is on wheels and can be pulled. Power House is
on wheels. - All Steel Log Deck, 34' long x 12' wide, H 178 Chain with Stop and Loader Gardner Denver Air Compressor, 200 PSI, 3 Phase - 620 Fulghum Rosser Head Debarker,
Cap 20' log, Motors, Gear Box, Starters, Switches - 17' Cornell Log Deck, 878 Chain, Heavy
Duty Hurdle Chain Type Log Turner with all gear boxes, drives, and switches - Carenth AL36, $117,500.00
3 Headblocks, 13' Long, 3 Sets Trucks, Hydraulic Set Works - 213 Hydraulic Feed with Air
Compressor, Pulls off of Mandrell - 3 Deck-in-one, 44' Long, 12' Wide, 5th Pin Gear Boxes,
Motors/Switches/Starters, All Attached. 120 Roller Chain, Deck 1 & 2, H130 Roof Top Chain
- Miner Edger 230 with 30 HP Motor, Starters, Switches, Tailing Device - Power Supply
House for all of mill with inlets - Morbark 58", 3 Knife Chipper, Horizontal Feed, Top
Discharge, 125 HP Electric Motor, Starter/Switches/Gears, 6 x 6 Fulgum Chip Screen and
Cyclone with motors, starters, switches - Chip Loading System
Louisiana
Maine
Ontario
Pennsylvania
South Carolina
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$19,900.00
$22,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Wisconsin
16540
STATE
AD #
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 9
COMPLETE CIRCULAR SAWMILL OPERATION - Available after May 1, 2015 #1 Meadows
Circular Sawmill: Left hand, 12 V over hydraulic, hydraulic log turner/dogs/feed/setworks.
10' carriage with 2 head blocks, Capacity 16' X 20", 2 - 52" F style inserted tooth blades,
Blade changing tools, Jones air grinder, Conveyors, 16' and 24' Log Deck with stop and load,
160 HP John Deere PowerTech turbo diesel engine. Portable with 40' track. Meadows Edger:
3 saw edger with fixed blades (3 1/2 and 5 1/2), F style blades. Capacity 4" thick X 36" wide.
Blades can be changed to moveable. No power. 26' Cornell Blower 2012 Go Fast Resaw: 3
head. No return or runaround. Used for cutting pallet boards. Includes Up Country Cornell
$104,500.00
26" Blower, Deduster, Sizer and Chop Saw. Line shaft ready. John Deere 115 HP diesel
engine. Cornell Double Arbor Gang Saw with Sizer Head: 12 V over air for hold downs,
Hydraulic feed, Includes extra used blades and spacers, 115 HP John Deere turbo diesel
engine, 36" blower with all piping included, Blades are 3/16 kerf. Capacity any width X 5
1/2:, Variable speed feed. Good condition. Montgomery Blo Hog 26HD40: 24" wide X 24'
Long Incline conveyor - top feed, Y pipe, 240 HP John Deere turbo diesel engine rebuilt 300
hours ago, 2013 all rings replaced, Extra anvils and extra rebuilt hammers. Good condition.
Circular Sawmills, Handset
PRICE (U.S.)
14198
395 Corley, handset, right hand, all new wood, 3 headblocks, 12' carriage, includes two 52"
insert tooth headsaws, upgraded to newer bearings, all steel 2x16" 3-saw edger, everything
run by 371 Detroit diesel power with V-belt pulleys, 1900 hours on the power unit. Includes
enough extra parts and components to build a second sawmill.
$7,000.00
Reduced
British Columbia
8118
Customized circular sawmill, right, hand, handset, heavy steel beam construction w/zigzag
bracing, 3 headblocks, 14' carriage with 36" opening, two hydraulic log turners, foot receder,
hydraulic outfeed rollcase, live slab belt, 335 Cummins diesel power, accepts 42"-50"
headsaws. Producing at least 10,000 bf daily, more with a larger crew. Designed to never
get out of alignment. Transportable by skid winch to lowboy.
$12,000.00
Reduced
Illinois
16423
Circular sawmill, right hand, handset, wood husk and track frame, 52" inserted tooth
headsaws, 3 headblocks, 14' carriage. Does not include power.
$2,500.00
Illinois
16282
Meadows #1 with choice of 2 headblock, 3 headblock, or 4 headblock carriage. All steel.
Right hand mill. 56" head saw. Belt driven vertical edger. Hydraulic. New hoses. Includes
log turner, log deck, live out feed rollers. Cut logs 18' length. No power.
$17,000.00
Illinois
14964
TimberKing M-14, 3 headblocks, 10' carriage, powered by Jeep 258 6-cylinder gas engine
with automatic clutch and throttle
$4,000.00
Indiana
8740
Enterprise circular sawmill, completely rebuilt, handset, left hand, 3 headblocks, 16'
carriage, 56" and 54" headsaws. Includes belts, pulleys, extra teeth, grinder, extra I-beams
and parts, 50 HP 3-phase power.
$4,000.00
Kentucky
15977
215 Tyrone Berry carriage drive for end of track for cable drum.
$3,300.00
Maryland
12861
Foley-Belsaw, 2 headblocks, 10' carriage, 48" inserted tooth saw, PTO attachment.
$2,000.00
Maryland
11273
American #1, portable on single axle trailer, right hand, handset, 3 headblocks, 10' carriage
and husk, everything on reinforced double all steel frame I-beam and tubing, 54" and 48"
headsaws, 2-strand 12' gravity infeed deck, 20' of live outfeed rollers built on the mill,
sawdust blower, 671 Detroit power on lineshaft off Diamond Rio truck, hand filer, extra
teeth, tooth changing tools. Includes Frick 4"x24" 2-saw edger. Can see in operation. Will
sell for $6,000.00 for the sawmill and edger without power. Producing 100 ties per shift.
$8,000.00
New Hampshire
14932
1996 LaneTech #0-30, all steel, handset, right hand, 2 headblocks, 10' carriage, Glover
feedworks, foot receder, two sawdust blower, 48" inserted tooth headsaw, excellent
condition. Everything powered by 100 HP 3-phase power unit.
$6,500.00
13000
Lane circular sawmill, right hand, topsaw, steel husk frame, 16" wood carriage, 3
headblocks, two 52" hardwood and softwood blades, 2 sawdust blowers, transfers and
decking, Lane 2"x18" 2-saw edger, Cat D8800 Cat power unit with Pony motor.
Disassembled and ready for shipping.
$11,500.00
New York
16613
New
Custom Built Handset Circular Sawmill. Portable - on a 48' flatbed trailer (can be pulled by
over the road tractor). Right Hand Mill. Steel Husk, Steel Carriage, and Steel Track Frame.
Produced by American Machinery Co in the late 1940's. Mill designed for 60" inserted tooth
head saw. 4 Head Blocks. 16' Carriage. Carriage has Hydraulic Drive System and Hydraulic
Piston Type Log Turner. Has been used as stationary mill for past 20 years. Kept inside.
Slant 6 Cummins Diesel engine with approx 140 HP. Naturally aspirated. Engine runs mill
thru direct drive. Mill alone $3000.00 Engine alone $500.00
$3,500.00
New York
6229
Lane #2, LH, log turner, Glover carriage feed, cast iron husk, 7 HB, 4 dogs plus Sawyer's
Favorite, 18' carriage, 52" saw, 40" topsaw, extra saws, 13000 Cat, Lane 4x36 2 saw edger,
overhead rosser, 16' end trim, sawdust blower.
$12,500.00
New York
15003
Lane #1, wood in fair condition on husk, Babbitt bearings in good condition, includes
setworks, track and rollers, 12" flat belt pulley, 4 headblocks, 3 tapers. No carriage, blade or
power.
$1,150.00
Alabama
New Hampshire
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
North Carolina
Ohio
16561
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 10
Frick, Left hand, 4 Head Blocks, Wood carriage - 15'. 55" blade. Capacity approx 15' X 24".
No power. Not currently operating.
Portable 01 Frick Sawmill. All steel with 3 headblock 15' carriage. Right hand. 56" F style
15833 insert tooth blade and 52" B style blade. Many extras like lumber carts, cant hooks.
Updated Sharpener is included. Also extra bearing for mandrel and some other extras. Everything is
in fair condition. John Deere 6 cyl 150 HP diesel with 3500 hours and clean well kept engine.
$2,700.00
$18,000.00
Ohio
16204
Enterprise Model 21. Handset - Right Hand, 2 Man Mill. 16' Wood Carriage and Wood Husk
(original). 3 Headblocks. Flat belt drive. Cuts logs 22' long. Has babbit bearings. No power.
$5,000.00
Ohio
15669
00 Frick, handset, right hand, portable on truck wheels,3-headblocks, 12' carriage, wooden
carriage frame, 54" headsaw, half-moon log turner, foot receder, sawdust blower with some
piping, live outfeed conveyor, five v-belts, 471 Detroit power unit, 250 gal. fuel tank.
$22,000.00
Oregon
American #1, all steel, handset, right hand, portable on 4-wheel axle, 3 headblocks, 14'
American #1 carriage, two 8' track extensions for 47' of track, updated to all newer bearings,
14603
some extra components and parts, 52", 56", two 60" inserted tooth headsaws. Sprockets and
Updated
gearbox already installed if you want to add an outfeed conveyor. 671 GMC diesel power
with Rockford clutch, runs fine.
$9,500.00
Reduced
Pennsylvania
16585
New
No 1-C Frick, Handset, Right hand. 15' Carriage, 4 Headblocks, Power Receder, 50'
Tracking. Complete mill was rebuild with wood in early 90's. Mud Saw, Log Turner Manuel,
2 good 56" F style Simmons Saw Blades, Saw Sharpener and a Hand Jockey Grinder. 360'
No-55 sawdust chain. Power is 250 HP Cummins Diesel approx 2200 hrs. In good running
condition. Also extra parts, saw teeth and holders.
Pennsylvania
16565
01 Frick Sawmill on wood. Steel parts are in excellent condition. 20' Carriage, 4 Headbock,
with hand tapers and hand dogs, a model B setworks and power receder, 6 axles with press
on wheels. Wood husk with all drive pulleys, a 6' mandrel two Frick mandrel bering, and a
cable drum drive. The steel on this mill is immaculate.
$8,995.00
16403
00 Frick sawmill on wood frames. Mill is in good condition. The husk and carriage frames
are solid. Carriage is 20' in two 10' sections equip with 4 head blocks, hand tapers, hand
dogs, and a model B set works with power receder. Husk is equip with a 2 3/16" mandrel, 3
mandrel bearings, and a 4 3/4" saw collar. The track and ways are include. Way frames are
95% solid, slight deterioration of wood at the ends of the way frames.
$4,495.00
Reduced
Pennsylvania
15463
1920's 00 Frick, handset, right hand, wood husk, new wood on carriage and track, 3
headblocks, 15' carriage, 48" and 52" inserted tooth headsaws with hand grinder and swage
and insert tools, sawdust blower, 5' and 10' roller beds Includes 4"x27" Frick 2-saw edger,
needs some work. Everything powered by 230 Cummins diesel power, 220 HP, still in truck
frame with transmission, short drive shaft, and 250 gallon oil tank. Also includes 7000 lb log
trailer 21' long X 6'-2" wide.
$11,900.00
Pennsylvania
15024
Foley-Belsaw M-14, 2 headblocks, 10' carriage, 40" inserted tooth headsaw, includes Belsaw
tooth grinder and PTO attachment.
$2,250.00
Saskatchewan
7995
Watrus, LH, handset, all steel, 3 headblock, 15' carriage, two 50" headsaws, 36" topsaw, 29'
live outfeed belt, sawdust blower, grinder. Coutts 4"x36" gang edger. All hydraulic and belt
driven by 871 Detroit. Also includes 2 trim saws and misc. parts.
$22,000.00
South Carolina
16602
New
ALL PARTS FOR A COMPLETE MEADOWS SAWMILL 4ft Circular blade (52 bits) 45ft (dual)
real mini railroad track (6 X 15ft sections) 3 headblocks, 4 wheels for carriage Power takeoff
unit --- Extra attachment Some drag chain, and rollers --- Extra attachment Table cutoff saw
(smooth turning) --- Extra attachment 4 Cylinder, International tractor engine, starts on gas
and runs on kerosene (low compression engine), not run in many years but should be ok to
recondition. Most parts have been sandblasted and painted *** needs to be restocked on
wood or steel *** This is a heavy duty, well build mill and has all the parts, plus extras.
$5,500.00
Tennessee
16559
Morgan Sawmill
$10,000.00
Texas
16389
Foley Belsaw Mark 3. 12' carriage. Capacity 14' X 14.5". 2 head blocks, 40" inserted tooth
blade. No power. Blade rehammered to match PTO tractor rpm.
$1,500.00
Pennsylvania
Virginia
West Virginia
2168 American #2 circular sawmill, right hand, handset, portable on 40' flatbed trailer, 3
Updated headblocks, 12' carriage, two 48" headsaws, Ford V-8 330 gas engine.
16250
00 Frick with 3 headblocks, metal track, wood saw box and wood carriage. Sawdust blower,
Log turner. 14' Carriage. 52" and 54" blade. Capacity is 16' X 24". Has rollers off of saw box.
Front of mill is reinforced with metal. Power-Deutz 6 cylinder 230 HP diesel in good
condition.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$9,000.00
$4,500.00
$7,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 11
#1 Meadows Circular Sawmill: Left hand, 12 V over hydraulic, hydraulic log
turner/dogs/feed/setworks. 10' carriage with 2 head blocks, Capacity 16' X 20", 2 - 52" F
style inserted tooth blades, Blade changing tools, Jones air grinder, Conveyors, 16' and 24'
Log Deck with stop and load, 160 HP John Deere Powertech turbo diesel engine. Portable
with 40' track. Meadows Edger: 3 saw edger with fixed blades (3 1/2 and 5 1/2), F style
blades. Capacity 4" thick X 36" wide. Blades can be changed to moveable. No power. 26'
Cornell Blower Available after May 1, 2015
Wisconsin
16541
STATE
AD #
Indiana
16219
15 HP Ingersol Rand Air Compressor, belt drive. Very good condition.
$1,600.00
Kentucky
15852
Ingersoll-Rand 30 hp air compressor, electric, 3 phase power.
$2,000.00
Reduced
Missouri
15523
Sullivan D185Q6JD screw-type air compressor, 4-cylinder John Deere diesel power.
$5,500.00
Reduced
Missouri
16448
Quincy Air Compressor model 5120. 95 cfm at 175 psi. Mounted on 200 gallon tank. Yanmer
Thermal King Diesel with auto stop and start. 4800 hours on diesel engine. Currently in use.
Good condition.
$9,500.00
Pennsylvania
16350
Gardner Denver Model EDE99MM. Complete unit with Auto Sentry RS2000 Airpilot
Controller.
$3,500.00
STATE
AD #
Mississippi
Air Compressors
Attachments
16337
Forks that are 4'6" long, made for a grapple attachment.
Updated
$17,500.00
PRICE (U.S.)
PRICE (U.S.)
$4,000.00
Reduced
Quebec
16465
Clam Head
$500.00
South Carolina
16174
AMEC Directional Tree Cutter. ST%-26, 84-26-005. Can be used on most Loaders.
$3,000.00
Washington
16195
1992 UNIMOG Implements off of a Freightliner/Mercedes/Unimog. Only 1105 miles. For
sale as a Unit or by the piece: Case Back Hoe Attachment, Bucket Loader These are nearly
new condition. Also all Hydraulics: tanks, cooler, hose reel, chain saw, 2 - jack hammers,
$5,500.00
STATE
AD #
Baggers/Balers
Kentucky
15236
The Machine Shop Model 200 shavings baler/bagger, produces 12"x16"x30" bales, some
bags included. Power not included.
Pennsylvania
16461
Shavings Baler, 3 phase electric. Fills a 14" X 18" X 20" bag. Bales approx 6000 - 7000
pounds per hour. Includes 5000 bags.
STATE
Michigan
AD #
Band Resaw
16568
Baker A Band Resaw. 3 phase electric. Manufactured in early 1990's.
Updated
PRICE (U.S.)
$3,500.00
$12,000.00
Reduced
PRICE (U.S.)
$5,500.00
Quebec
16477
Vertical bandsaw. 3/4HP 220v
$1,000.00
Texas
16131
Yates American 36" bandsaw, 15 HP, Will support a 2" band blade, Still in good shape.
Owner will load equipment upon sale.
$2,500.00
STATE
AD #
British Columbia
15373
StrapPak strapping machine, 110V, cutting and heat seal option, includes strapping table
and stops at 2 meters, 3 meters, and 4 meters. Needs some work.
Missouri
14424
Strapak JK-2 banding machine, 110V, adjustable tension, 1/2 roll of nylon strapping included.
$800.00
STATE
AD #
Bands
PRICE (U.S.)
Arkansas
11307
International Knife & Saw wide bands, two new 10" x 32'5", 15-gauge, 1 3/4" tooth spacing,
and three 11" x 47', 1 3/4" tooth spacing
Kentucky
15978
7" X 12" metal band saw comes with power.
STATE
AD #
Blades
PRICE (U.S.)
Nebraska
16065
Foley Belsaw blade and shaft: 46" blade, needs new teeth. Drive shaft, mounting plates that
hold bearings can go with shaft. Will separate drive shaft/mounting plates for $75.00.
$525.00
Oregon
16497
184" Band Blades compatible with the Wood-Mizer LT70. 1 1/4" wide. 45 thousands thick.
$8.00 each. Quantity: 450.
Oregon
16495
2 Lucas blades for the 8" mill.
South Carolina
16166
489 Saw Blades: Carbide scroll saws, some thin left, some corley edgers, some cooks edgers,
Frick gang edgers, Busbee gang edgers, Assortment spacers for each gang
$4,500.00
STATE
AD #
Boilers
PRICE (U.S.)
Michigan
16580
New
Banding/Strapping
PRICE (U.S.)
$1,000.00
Reduced
$2,100.00
$1,000.00
$8.00
$350.00
Kewanee 30 HP low pressure steam boiler.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$2,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Pennsylvania
15486
STATE
AD #
New York
16549
STATE
AD #
Ohio
15580
STATE
AD #
South Carolina
15844
STATE
AD #
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 12
Peerless cast iron boiler with Becket commercial burner
Cant Sizer
Brewco Sizer, 6" X 10". Line shaft ready. Good condition. Used for pallet stock.
Chain
120 ' live sawdust chain
$2,500.00
PRICE (U.S.)
$5,200.00
PRICE (U.S.)
$1,500.00
Chip Vans
1999 ITE chip van, similar to Peerless, open top, new tires, around 42' length.
Chippers and ChipPacs
PRICE (U.S.)
$16,000.00
PRICE (U.S.)
Arkansas
11297
48" CME 8-knife chipper, HFBD, 75 HP motor and starter
$5,000.00
British Columbia
16090
Re-conditioned 54" 6 knife Forano chipper
$8,000.00
British Columbia
16092
Re-conditioned 66" Forano 6 knife chipper
$15,000.00
British Columbia
16091
Re-conditioned 62 " CAE 6 knife chipper
$18,000.00
England
16466
1989 Burks Model 1302M Chipper. Fully refurbished including the main chassis, disc, feed
rollers and main motor. The machine has been stripped to bare metal and powder coat
painted. All other parts new including every bearing, sprocket, chain and nut and bolt
replaced. Chipper housing replaced and new chip throwing paddles added. Infeed opening:
360mm (14.173") x 250mm (9.84"), Max round wood dia: 175mm (6.88"). Infeed: twin upper
powered feed rollers and 7 bottom powered feed rolls. Main drive: 55kw
$28,500.00
Illinois
16392
Morbark 48" ChipPac. "Amish Ready". Fully hydraulic but needs power unit. Includes
electric knife sharpener, 7 new knives, 14 used knives, extra screen.
$35,000.00
Kentucky
7356
Morbark 48" chipper. SFBD. 480 v 3--Phase. Not in operation.
$10,000.00
Michigan
15311
3-knife brush chipper, 65 HP Perkins diesel engine, 1800 hours.
$4,800.00
New York
13972
Asplundh brush chipper on factory axle, horizontal feed top discharge, 300 series Ford gas
engine, chips up to 9" material. Damaged. Needs work.
$2,500.00
Pennsylvania
15987
Portable Slab Wood Chipper with 4 cylinder 85 HP Ford diesel engine
$7,200.00
Pennsylvania
15903
Brushband Chipper model 100, Cummins 4 cylinder diesel engine
$11,000.00
South Carolina
14869 1997 Morbark Model 2400 36" chipper on factory axle, 108 hours, H&A 18" swing-in cutoff
Updated saw.
$12,000.00
Reduced
South Carolina
12747
Valby 48" combination 3-knife chipper and hammermill, PTO drive, includes 1 spare set of
knives. Original owner. Used less than 10 hours. Designed to produce animal bedding,
mulch, etc.
$7,500.00
Tennessee
15924
Morbark Whole Tree Chipper 400 Cummins engine Model 22 Serial Number 1507 6158.3
hours
$75,000.00
Tennessee
16280
48" Precision Chip Pack Tub Grinder with extra accessories.
$7,000.00
Wisconsin
16426
48" Precision Chipper (3 knife) with 16" inlet and 11" outlet. Includes a swivel hood on top
of outlet so sawdust can blow into specific area; 3 new sets of knives, 8 used sets of knives.
No power but runs on 16" - 20" V belt pulley.
$5,000.00
STATE
AD #
Alabama
13789
Hazelthorn 20" chop saw with pneumatic controls. 20 HP 3-phase, air hold-down, air stops.
Chop Saws/Cutoff saws
PRICE (U.S.)
Kentucky
15830
Whirlwind chopsaw with hydraulic infeed and outfeed
$2,600.00
Kentucky
15825
Custom made chop saw similar to Morgan
$2,000.00
Kentucky
15211
Cutoff saw, swing down, 15 HP 3-phase 220/440, infeed rollers, no blade.
$2,000.00
Michigan
16471
Double End Cutoff Saw. Line shaft ready. Includes 2 blades and belts.
$3,000.00
Michigan
16049
Grutter popup air saw 12'' wide capacity with rollers on 1 side
Minnesota
16502
Shop built Chop Saw with 24" blades and adjustable stops.
$3,000.00
New York
14106
Whirlwind WW212R upcut saw with blades and stops, 3-phase power.
$2,300.00
Pennsylvania
16566
Cornell chop saw with belt in feed and chain drag out feed. No hydraulics needed. This item
is in good condition.
$1,950.00
Pennsylvania
16247
Chop saw, whirlwind, bottom-fed blade; air-activated, 18"; still operating;
$2,500.00
$780.00
$660.00
Pennsylvania
16141
Manual Pull-Down Chop Saw with 16' live roll infeed and 19' live roll out feed
$20,000.00
South Carolina
16078
H & A 18" swing-in cut off saw, 5 HP single phase power.
$2,000.00
Washington
15495
Kent pull down chop saw, two 24" blades, 7"x 9" capacity, 5' infeed and 10' outfeed rollers,
10 HP 3-phase. Includes Kent waste conveyor, single phase power and 2 yard sawdust
hopper.
$5,000.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
STATE
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
AD #
3/24/15
PAGE 13
Conveyors
PRICE (U.S.)
Alabama
9873
100' bark conveyor with trough, 5 HP 3-phase power.
$7,500.00
Indiana
15606
36' log trough, hydraulic drive, includes gear box and hydraulic motor.
$2,500.00
Kansas
16359
30' vibrating conveyer tray wth 10 HP motor. Conveyor is 22" wide on the bottom and 29"
wide at the top.
$7,500.00
Kentucky
16236
Magnetic conveyer. 30" Crossbelt Magnetic Separator with Small Conveyor. Approx 21"
wide.
$5,200.00
Kentucky
16238
Conveyor - 60' conveyor for loading walking floor trailers. 24" wide.
$8,200.00
Kentucky
16240
Belt Conveyor approx 60 feet X 12"
$1,000.00
Kentucky
16241
Belt Conveyor approx 30 feet X 12"
$800.00
Kentucky
16237
Magnetic Conveyor. 20 Foot Conveyor with Magnetic End Roller 22" wide.
$2,000.00
Maine
13417
Live belt conveyor, 67' length x 3' width, 2 HP 3-phase power, adjustable truck loading
system raises up to 15' height. Great for use as sawdust conveyor.
$8,500.00
Missouri
16288
Incline Belt Conveyor, good condition, 8.5’x18” and 4’ high, Leeson Motor. Conveyor made
of stainless steel.
$1,175.00
Reduced
Missouri
16289
Belt Conveyor, good condition, 26’x10”, US Electrical Syncrogear Motor. Conveyor made of
stainless steel.
$1,950.00
Reduced
Virginia
16258
25 ft morbark heavy duty v conveyer
STATE
AD #
Iowa
$2,500.00
Cutstock Manufacturing
From Cant to Pallet Stock Operation: Stutzman mfg built green chain with unscrambler,
chop saw with numerous air stops for length, and sizer. Heavy built unit. Four head
Wood-mizer resaw, with complete runaround and Morgan Deduster. Set up with air and
16429
hydraulics now, but can be switched over to electric. Running off 5.9 Cummins diesel on
Updated
power skid that produces all power. 2 walk behind Yale forklifts with Honda engines, 13 HP.
Cooks hydraulic band saw blade sharpener and setter and roller. Needs hydraulic power.
Includes blower, conveyors dump box etc.
$117,500.00
STATE
AD #
British Columbia
15704
Sawdust blower with 5’ diameter 8’ cyclone with stand and 60’ of 6" flexible sawdust
ducting
Pennsylvania
16109
Cyclone blower system 40 hp elec
STATE
AD #
British Columbia
12925
Morbark 40" rosserhead debarker with bucksaw on Fruehauf trailer, 3-strand infeed deck,
4-strand outfeed transfer rollcase. Was debarking 75,000 bf per shift when taken out of
service. Includes electrical, transfers and decking.
$19,500.00
Georgia
15755
Valley rosserhead debarker with extra head, complete hydraulic power source with power
pack, operator cab. Infeed and outfeed not included. Power not included.
$12,500.00
Indiana
Cyclones
PRICE (U.S.)
PRICE (U.S.)
$3,500.00
$25,000.00
Debarkers
16154 Morbark 632 Debarker, Electric 3 phase, 240 or 480 V, Capacity 6” to 32”, Infeed deck,
Updated Trough Conveyor
PRICE (U.S.)
$15,000.00
12567
Morbark W-4 rosserhead debarker, infeed rolls, 3 extra debarking heads. Selling without
power.
$1,750.00
Michigan
16056
Log Debarker: 25HP electric on head, 10HP hydraulic for head travel, log turners, and S&W
16` x 6` log deck w/stop and load,. Also has a bark drag with 2 hp 220v single phase. Head
up and down is air. The Debarker and Log Deck are sold together as the hydraulics from the
Debarker runs the Log Deck. Equipment is in Fair condition.
$8,800.00
North Carolina
11127
HMC V216H rosserhead debarker, slant track, 25 HP 3-phase. Includes 18' 3-strand live log
deck, hydraulic power
$11,000.00
Nova Scotia
12083
Forano 30" Cambio ring debarker with Cambio 50 HP hydraulic infeed and 20 HP outfeed.
Includes all electrical and motors. Excellent condition. Can see in operation.
$25,500.00
South Carolina
16167
Bark Machine and 2 big pallets of bark
$2,000.00
Tennessee
16400
HMC Debarker with 2 strand live deck, stop & load
$8,800.00
Tennessee
14293
Morbark EM-16 rosserhead debarker, 20' hourglass infeed and outfeed rolls, 75 HP drive
motor, includes 30' incline outfeed conveyor, extra feed rollers, structural steel. Now also
includes $2,000.00 worth of extra 24" feed rollers
$11,000.00
Virginia
14730
Custom built debarker, 8" blade mounted on pivoting arm, designed as either stand-alone
system or sawmill mounted, v-belt driven by a 3 Ph motor on top, includes concrete
counterweight that keeps it from sawing down into the log if mounted on the sawmill.
$1,000.00
STATE
AD #
Maine
Decks, Conveyors, Transfers
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
Kentucky
16287
Deck 4' X 16'. Includes gear box and 3 phase electric motor.
Kentucky
15829
Live deck
STATE
AD #
South Carolina
3/24/15
PAGE 14
$800.00
Dip Tanks
16079
Dip Tank, 5' wide, 43" deep, 20' length. Only tank and no hydraulics. No power.
Updated
STATE
AD #
Iowa
15974
STATE
AD #
Arkansas
11309
$2,000.00
Doziers
1974 Fiat Allis Dozier, about 12000 hrs. No bucket/only a blade. 140 HP.
Dry Kilns
Irvington-Moore dry kiln components for 70' x 34' package kiln (approximately 80,000 bf
capacity). Complete except for building. Includes controls, nine 6' diameter fans, 30 HP
motor, heating coils, 8 ventilators, 4 aluminum doors and carriers, ceiling baffles, piping,
steam traps, electrical controls.
PRICE (U.S.)
$5,000.00
Reduced
PRICE (U.S.)
$17,900.00
PRICE (U.S.)
$16,000.00
Illinois
Ebac LD-3000 mounted in Supreme 12' insulated truck box w/vertical rear door entry, dries
up to 3000 bf of lumber up to 11.5' length, freestanding but can be transported easily. The
doors,sides,roof and part of the front wall are insulated. Most of the fasteners are stainless
10030 steel. Each circulating fan is fused on a separate circuit. Once the wood is dried, a fan can
Updated be unplugged and a dehumidifier can be plugged in to maintain the finished moisture level
without excessive costs. Truck box purchased new and only used for the kiln. All wiring and
electrical in place. Controls out of direct weather. Only run 9 charges. Always under roof.
Ready to run. Delivery to your site is possible.
$5,500.00
Reduced
Maryland
Dry kiln components: PC Specialty kiln controller with 7 day chart recorder, RH Sensor and
10620
temp probe, high pressure pump, two 3-way valves, one gallon can of BOSS used to oven dry
Updated
kiln samples, Serious offers considered.
$3,995.00
Reduced
Michigan
16453
Complete components for 2 - 40,000 bf kiln. Good condition, Includes controls, fans,
compressors, brackets, hangers, ceiling baffles, electrical panels, piping, and doors. Has
everything but the boiler. Also has automatic reversing fans. Ready to load and go. Seller
willing to help assemble kiln.
Michigan
14148
2006 Northland NK800, aluminum construction, includes tracks and lumber cart, electric
heat, single phase 220V. Handles up to 8'6" material. Over $7,000.00 comparable new.
$4,800.00
Minnesota
16534
Porta Kiln XL approx 10 years old. 42' long. Capacity is approx 30,000 bf. Load carts
recently replaced and used 2 times since. Needs some repairs with boiler. Sold "As Is".
$17,000.00
North Carolina
10869
Complete set of components for Nyle 25,000 board foot kiln. Only needs chamber.
$12,500.00
North Carolina
10868
Hitachi 8000 board foot dehumidification dry kiln, includes fans, controls, compressor.
Needs a new chamber. 10 HP 3 phase power.
$6,000.00
Ohio
16232 2 Timber Wolf Dry Kilns. 24000 and 40000 bf capacity. Components only. 15 Years old with
Updated 12 volt controllers, gas boiler, Fin Tubes, Fans, Aluminum Doors with Track and Carrier.
STATE
AD #
Michigan
16582
New
Drying & Treating
2 Nyle Doors 27 3/4" for door opening of 10'X6". Fin tubing - 200'. 6, 3 phase 24" fans.
Kewanee 30 HP low pressure steam boiler for 12000' kiln.
Edgers, Board
$34,000.00
$8,000.00
Reduced
PRICE (U.S.)
$16,500.00
STATE
AD #
Alabama
9867
Miner 4"x32" 3-saw edger, 50 HP 3-phase power
$4,000.00
Iowa
16594
New
Cornell edger. 3 saws - 2 moveable and 1 fixed. Capacity is 4" X 36". No power. Good
condition.
$5,500.00
Kentucky
15531
Salem 4"x 32" edger, 1 movable and 1 stationary blade, 25 HP 3-phase power
$4,000.00
Michigan
16396
Frick Edger 4" X 32" with 2 blades. Can add 3rd blade. No power.
$3,000.00
Michigan
16035
Shop built edger capable of cutting 6" by 36" material. Edger has 2 saws: 1 moveable, & 1
stationary with insert teeth. Top & bottom feed rolls, fence and saw powered by onboard
hydraulic unit. Screw rollers off-feed material onto a conveyer belt (powered by a 1hp.
motor) which then returns beside operator. Edger also has onboard conveyer feed sawdust
blower. Everything on the edger runs off of a single 100hp. electric motor.
$22,000.00
Reduced
Michigan
16260
Dixon Rusch 4"x30" board edger. Two blades- one fixed. 14" insert tooth. Produces 4"-22"
widths. 10' out feed roller deck. PTO shaft. Portable. Excellent condition, very low hours.
$6,750.00
Missouri
15638
2"x24" 2-saw edger, replaced flat belt drive with chain drive, replaced all Babbit bearings
with pillow block bearings. Does not have power but can take electric or gas.
$2,500.00
Ontario
15532
Oliver 4"x24" 2-saw edger, includes infeed and oufeed and outfeed tables. No power.
$3,500.00
Pennsylvania
16457
Cornell 36" edger with 2 moveable blades. Includes extra set of teeth. No power. 6" thick X
36" wide. Good condition.
$6,500.00
South Carolina
15151
Miner 4"x27" 2-saw edger, flat belt drive, no power.
$1,750.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Wisconsin
15970
STATE
AD #
British Columbia
13065
STATE
AD #
Missouri
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 15
Shop built board edger, 2 blades, roller infeed, belt outfeed. Edging side discharger.
Edgers, Bull
6" Bull edger, 36" wide throat, 3 saw, 2 movable, powered by Ford 6 cylinder 4 speed gas
engine, edge guide and air assist, 6" depth capacity. 6’ x 30" 3 roll edger infeed with fence,
powered, 8’ x 30" 6 roll outfeed, powered, extra 3 rollcase infeed assembly. Easy to
breakdown and load.
Edgers, Gang
Morgan Extended Champ: Custom built double bay gang edger 25 HP Linomar Gas Engine
14421
Has 5 blades, 3 split on one side and 2 split on other side Tow package included. Edger will
Updated
cut material up to 3" thick.
$3,800.00
PRICE (U.S.)
$6,900.00
PRICE (U.S.)
$5,500.00
Tennessee
16114
Miner 6-saw gang/edger with a 75hp 3-phase electric motor. Saws have all recently been
reworked/sharpened and bearings are less than 3 years old.
$8,000.00
Wisconsin
13556
Meadows gang edger, set up with 4 insert tooth saws, infeed and outfeed tables, 40 HP
3-phase power.
$5,000.00
STATE
AD #
Alaska
14567
Renco 2-saw 6" vertical edger, no power.
Edgers, Vertical
$3,500.00
Wyoming
16097
Renco vertical edger with a 40 HP 3 phase electric motor. Comes complete ready to install
with controls, starter and figure board. In very good condition.
$5,500.00
STATE
AD #
Michigan
16217
12' Extension for Wood-mizer, 1993 or later. Never been used.
$2,200.00
Oregon
16496
Rail Package includes 2 standard rails with 2 adjustable end stands, 1 standard rail cut
incase you just need a 10 foot extension, and 2 side supports to stabilize added length.
$2,300.00
Vermont
14365
Pre-1986 Wood-Mizer 12' track extension, designed to attach to Wood-Mizer LT30 and LT40
series sawmills produced between 1982 through 1985, Needs some work.
$550.00
STATE
AD #
Feedworks
PRICE (U.S.)
South Carolina
16172
Wichita Air Tube Disc Clutch, 50 HP Motor, Carriage Drive
$2,750.00
South Carolina
16173
Salem Carriage Drive, 208 5059. Never installed. Never Used.
$3,000.00
STATE
AD #
Filing Room Equipment
PRICE (U.S.)
Georgia
16345
Workshop Tools: Gardener chipper knife grinder, Sharp-All circle saw grinder with grinding
rocks, Bush hog grinder, Ronx Add-a-Phase (copper), 30 galleon air compressor. Will
separate.
$2,000.00
STATE
AD #
Firewood Processors
PRICE (U.S.)
Arkansas
14415
Iowa
Iowa
Louisiana
Extensions
PRICE (U.S.)
Timberwolf TW-6 log splitter, 6 way wedge, 28-ton capacity, log loader, PTO power.
2007 Timber Wolf TW-6 log splitter with both log lift and table grate options, 4-way and
14695 6-way splitter heads, 5" cylinder, 3 1/2" push rod, hydraulic controls and hydraulic tank, 28
Updated ton splitting capacity, 8-second cycle time, 18 HP Honda gas engine, handles up to 24"
maximum length. Original owner. Kept inside. Only produced 15 cords a year or so.
PRICE (U.S.)
$4,800.00
$7,999.00
Reduced
Two firewood vending machines in 20' shipping containers, designed to sell 3/4 cu. foot
bundles in campgrounds for $5.00 each ($850.00 per cord). The larger machine will vend
from up to 96 bundles of wood without needing a refill, and the smaller machine will vend
up to 60 bundles without needing a refill. Asking $7,500.00 for the larger machine and
$6,500.00 for the smaller machine or $12,000.00 for both.
$12,000.00
Hud-Son Firewood Processor Model: Little Joe Hydraulic or LJH Year: 2005/2006 with
unknown hours. (No hour meter) Condition: Used but in great operating condition Trailer
16556
Package: Yes. Can be pulled with any size truck with 2’’ ball Power Source: Briggs and
Updated
Stratton Vanguard 21hp gasoline engine Attachments: 1 electric powered conveyer
(homemade)
$10,500.00
10841
16452
Firewood processor with International power unit. Ran very strong when the operation
closed down a few years ago. Entire unit intact. trailer, saw, splitter, power unit.
$1,100.00
Texas
15161
2008 MultiTek Model 2020CSC firewood processor with Multitek 30' firewood elevator
(2011), on factory axle, enclosed cab with heat, new tires all the way around, ready to haul
by one-ton dualie. Designed to handle crooked logs and for production averaging 2.5 cords
per hour. Includes chain saw bar bucking saw, 4-way splitter and brand new 6-way splitter,
and tandem hydraulic pump which allows operator to buck and split at the same time. 1600
hours. Equipment $115,000.00 comparable new. Will deliver for fuel cost and expenses.
$52,500.00
Wisconsin
14736
2003 Chomper Simplex 14 firewood processor, autocycle retrofit, PTO, 8 way splitter,
includes short log ram. Under 100 hours. Second owner.
$12,500.00
Quebec
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 16
Wyoming
16201
CordKing Model 60 Firewood Processor. Year 2000. 110 HP Turbo John Deere Engine. 5545
hours. Well maintained. Price Firm.
$70,000.00
STATE
AD #
Flooring Manufacturing
PRICE (U.S.)
Wisconsin
16483
Linear End Profiler - End matcher. Has 12 V battery for sensors. Cutter heads are belt
driven. Has air cylinders for hold downs. Amish Ready.
$42,000.00
Wisconsin
16482
Custom Built End Matcher. Line shaft ready.
$12,000.00
Wisconsin
16481
Doucet EM-S End Matcher. Line shaft ready.
$26,000.00
STATE
AD #
South Carolina
10441
Carco/Paccar G80 hydraulic winch, 1" cable, can fit on D-7 or D-8 Cat, more. Over $50,000
new.
$10,000.00
Reduced
Virginia
14925
Combination Future Forestry T36 logging arch with Mile Marker 70-500-50C 10,500# winch
mounted to arch with mounting bracket, factory modified to disassemble for palletization
and easy shipping, 100' remote control, large turf ties. $5,250.00 comparable new for all the
components. Will sell without the winch for $2,300.00.
$3,300.00
STATE
AD #
Forklifts
PRICE (U.S.)
Forestry Winch
British Columbia
9595
Komatsu 8000# lift capacity forklift with new front tires and battery. Manual steering.
Includes all components for power steering. Only 10 hours since tune up. Not pretty but
runs good.
PRICE (U.S.)
$4,500.00
Illinois
15864
Hyster YE40 Forklift, 4000 lb. capacity, 3 stage mast. Good paint. Runs well.
$1,800.00
Kentucky
16042
1996 Komatsu Forklift, 6000# capacity, pneumatic tires, propane engine, 2 WD
$8,500.00
Maine
14121
1980 Clark IT-60 series rough terrain forklift, 6,000 lb. lift, pneumatic tires. Needs minor
maintenance. Can see running.
$3,000.00
Reduced
Michigan
15817 Tow Motor - H30 E monotrol power shift Hyster forklift with side shift and 13' height and LP
Updated gass, 48" long adjustable width forks. Can lift about 3000 lbs. This is a hard surface forklift.
$2,100.00
Reduced
Michigan
16012
1949 Massey Ferguson 202 wide front tractor with single stage forklift on back. Includes
instruction and parts manuals.
$2,000.00
Michigan
15962
Forklift - Allis Chalmers 500 gas. Engine rebuilt and has 600 hours.
$8,000.00
Minnesota
15365
Lift-All L-60 6000# rough terrain forklift, 4-cylinder John Deere diesel engine, 6200 hours.
$7,500.00
Minnesota
14127
Ford 600 forklift, 4 cylinder gas with sideshift, 4000 lb. capacity.
$4,000.00
Missouri
16119
Forklift with flat head 4 cyl Continental gas engine. Has new starter but needs new battery.
$2,250.00
New York
10393
Cat DPL40 diesel forklift, 9000# capacity, dual drive, 6' wide carriage, 5' forks, 2-stage mast.
Good condition.
$14,500.00
Ohio
15838
1974 480A John Deere forklift. 7,800 hours, fork extensions up to 5 1/2'. 2 WD, new
alternator, new ring gear, and new starter. In great condition.
$6,000.00
Reduced
Pennsylvania
15618
1996 Ingersoll Rand 6000-8000 lb. rough terrain forklift, 3003 hours
Updated
$18,000.00
Reduced
Pennsylvania
13894
Massey Ferguson 6500, 6500 lb. lift., foam-filled tires, larger tires 50%, smaller tires
replaced a few years ago. Runs fine. Running daily.
$9,100.00
Pennsylvania
15686
Ford 4WD 5000#, all terrain mast loading forklift, needs work. Serious offers considered.
$4,000.00
Tennessee
16368
5000 lb Lin Lift built by Champ. Has Dual Wheels in front. Ford diesel which raises 12' with
side shift and tilts. Runs well. Brakes need work.
$5,000.00
Tennessee
15822
MF 6500, 14' mast with side shift.
STATE
AD #
Alabama
Furniture & Specialty Manufacturing
13892
DoAll vertical bandsaw, 36" throat, 15 HP 3-phase motor with starter, runs 1 1/4" blades.
Updated
$7,000.00
PRICE (U.S.)
$4,000.00
Indiana
12580
2004 Legacy Model 1800 Ornamental Mill. Includes over $1,000 in accessories: design kit,
casters, tool holder, rotary table, vise, moulding guides, over $3,500.00 in router bits for a
large variety of applications to include fluted column, spiral column, flat milling, post and
pole columns, moulding, furniture manufacturing, more. Original owner. Only 100 hours.
Single phase electric. Over $11,000.00 new with the extras. Will consider trade for a
bandmill.
Maine
14203
3 HP industrial shaper with knives for making raised panel doors, T&G of 1/2" and 3/8",
$300 in knives included.
$400.00
Reduced
Michigan
16087
German Peeler: 18" wheels, 5 knives that are 6" long. Head made by Dyna Products. Line
shaft ready.
$4,100.00
Missouri
15016
Hall & Brown mortiser and drill press, flat belt drive. Set up for lineshaft. Best for vintage
furniture or antique-style woodworking operation. Just under 2,000 lb. transport weight.
$1,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$7,500.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 17
Remaining components of lumber mill: Equipment is operational. Shop-size bandsaw, 2 HP
3-phase still in operation. Crescent Hollow chisel mortiser, 1 HP 3-phase. Window
manufacturing machine, 5 HP 3-phase. Jointer, 3 HP 3-phase. Table saw, 14" blade, tilting
table. 15 HP 3-phase.
Pennsylvania
14848
STATE
AD #
Alabama
9866
Esterer sash gang, hourglass roll infeed leads to power feed rolls, 40 extra 6" blades.
Handles up to 20" material. 671 Detroit power
$75,000.00
British Columbia
15372
1998 Brewer 6"x25" gang rip with cant sizer, handles up to 16 saws, 125 HP 440V on arbor,
50 HP on cant sizer, 10 HP power pack with speed controller, includes infeed table. Only run
for 50 hours. Needs saw collars.
$17,000.00
Reduced
Tennessee
13575
Memphis Machine Works 4"x24" gang ripsaw, 100 HP stand alone or 75 HP with starter,
includes several sets of carbide saws and spacers, 5 HP infeed with forward and reverse,
live outfeed rollcase with 4" rollers.
$6,000.00
Utah
14777
Torwegge straight line gang ripsaw, single arbor, includes 12" blades and spacers, 39 HP
3-phase 220/440.
$6,000.00
Gang Rips
PRICE (U.S.)
STATE
AD #
Illinois
15870
Brewer 6" X 12" single arbor gangsaw, indexible tooth, hydraulic feed, very good condition
$8,500.00
Michigan
15539
Wagner 8"x8" double arbor gang saw, variable speed infeed and reverse, new sawdust
blower. No power.
$6,000.00
Michigan
15677
Frick 8"x24" double arbor gang saw, 16" carbide blades, 3/16" kerf, hydraulic drive, 160 HP
Volvo diesel power unit, sawdust conveyor, includes extra blades and spacers.
$12,000.00
Reduced
Pennsylvania
16379
Keystone Machine double arbor gang saw. Hydraulic feed. No power. Capacity 6" X 8".
$3,500.00
Wisconsin
16543
Cornell Double Arbor Gang Saw with Sizer Head: 12 V over air for hold downs, Hydraulic
feed, Includes extra used blades and spacers, 115 HP John Deere turbo diesel engine, 36"
blower with all piping included, Blades are 3/16 kerf. Capacity any width X 5 1/2", Variable
speed feed. Good condition. Available after May 1, 2015
$18,000.00
STATE
AD #
Grading Station
PRICE (U.S.)
North Carolina
15873
Complete Grade line by Moore Kiln of Jacksonville Fla.(Currently USNR) Line is set up with
infeed chain feeding dual unscramblers. which then feed a grade chain with an over head
grader station. A grader can sit and operate a board turner then enter grade into a tally
machine. This is followed by the stacker chain that feeds a automatic lumber stacker where
lumber can be put on sticks then rolled out to go into dry kiln. This equipment is completely
dismantled but the plans are included to rebuild.
$48,500.00
STATE
AD #
Green Chain
PRICE (U.S.)
British Columbia
Michigan
Ohio
STATE
Gang Saws
$8,500.00
13068 Green chain: 5 strand 24’ x 40’ roller top chain with edge rollers, 5 HP drive with Crofts
Updated reducer, four 4’ x 10’ 5-roller lumber stacking decks. Easy to breakdown and load.
14959
40' 2-strand green chain, hydraulic motor with gearbox, #80 chain, uneven leg length due to
sawmill space constraints so, buyer would need to extend two legs.
16445
Green chain, 2 strand 32' with new frame. Powered by Honda engine.
Updated
AD #
Grinders
PRICE (U.S.)
$4,900.00
$2,500.00
$3,750.00
PRICE (U.S.)
Idaho
16362
West Salem Grinder model 1662HT. Ran good when removed from service. 75HP electric
motor recently rebuilt (less than 100 hrs run time) and gearbox recently replaced. (Less
than 250 hrs run time). Comes with 10 HP hydraulic pack and electric start panel. Good
running machine. Extra anvils and screens of varying size as well.
Kentucky
15160
Precision Husky Model 6K-440 6-knife grinder, new bearings and belts and reconditioned
the tables, 5 HP 3-phase main motor, 3/4 HP rotatior motor, includes transformer and on/off
switchbox. $17,000.00 comparable new.
$8,900.00
Massachusetts
16309
1987 WHO Tub Grinder Model P-12 500 HP SERIAL 4W7475 12' Diameter Tub 56" Long
Shaft. Good working condition.
$35,000.00
Michigan
15538
Haybuster industrial slow speed tub grinder, 3306 Cat diesel power, low hours on complete
overheaul, missing one or two hammers.
$20,000.00
New Hampshire
14386
1997 Rotochopper Model MC166 grinder, belts and hoses damaged in a fire. No damage to
the steel or the frame. Includes original motor and replacement motor.
$45,000.00
New York
13565
Hud-Son Equipment grinder, portable on factory axle, 2" ball, 30 HP Lombardini diesel,
variable speed hydraulic belt infeed 18" width x 6' length, 176 hours.
$5,500.00
Ontario
16102
Morbark Colorant Attachment (for Morbark Tub Grinder) Original $12700, Asking $7000
Good Condition - Used only 100 hours
$7,000.00
Pennsylvania
15809
Wood-mizer bandsaw grinder - selling for parts
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$45,000.00
$150.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 18
Quebec
16456
8’ wide Meri Crusher woods mower. Grinds brush several inches into the soil. Turns brush,
stumps and small trees into usable land for farming or plantations.
$27,000.00
South Carolina
15265
1997 Olathe Model 867 tub grinder, 10' tub, 2 new belts, new tires on trailer, 450 HP
Cummins diesel power. Good condition.
$45,000.00
STATE
AD #
Indiana
15651
Lamb 44" hammer hog, 200 HP 3-phase electric, 2 complete sets of hammers, 3/4" screen,
blower and 40 HP 3-phase motor. Both motors need on/off switch. Running fine when
removed from operation in 2010. Kept under roof.
$7,500.00
Reduced
Kentucky
16235
Hammer Hog - Jeffery Mini Mill Hammer Hop. 40 HP
$6,200.00
Massachusetts
16372
Schutte HZF40 Hog with 125 HP 3600 motor.
$2,000.00
Michigan
16404
Montgomery Blo-Hog 26HD Horizontal Feed, Mounted on back of an International Semi
tractor and powered by the Cummins N11 and hooked up to the drive shaft. 20 Ft vibrator
conveyor included.
$13,000.00
New Jersey
6941
Williams hog with feed bend, vertical feed bottom discharge, 75 HP 3-phase power.
$5,500.00
Hogs
PRICE (U.S.)
Ohio
15729
2012 Meadows Model 85 hammermill. No power. Origianl owner. Maybe 100 hours.
$10,000.00
Utah
15511
Mid Oregon Industries hog. 8.5"x6" opening, 20 HP 3-phase motor 230/460 volt
$1,800.00
Wisconsin
16544
Montgomery Blo Hog 26HD40: 24" wide X 24' Long Incline conveyor - top feed, Y pipe, 240
HP John Deere turbo diesel engine rebuilt 300 hours ago, 2013 all rings replaced, Extra
anvils and extra rebuilt hammers. Good condition. Available after May 1, 2015
$26,500.00
STATE
AD #
Husk
PRICE (U.S.)
New Hampshire
15551
HMC SH-17 husk with top saw and built-in bearer belt, includes 50 HP 3-phase motor on top
saw and V-belts for headsaw.
$7,500.00
South Carolina
15672
Husk frame and mandrell with offbearer belt, includes pulleys and belts
$2,200.00
Reduced
STATE
AD #
Ohio
14626
STATE
AD #
Georgia
16517
STATE
AD #
Michigan
16578
New
Michigan
Industrial Equipment
36" Continuous rotation grapple for Barko 160 loader.
Industrial Truss Saw and Router
SawTek industrial truss saw and router. Computer-controlled. Automatic feed. Dust
collection system. Installed new in 2002 at a cost of $125K+. Has 80 foot feeder tables on
both sides. Fully operational.
Kiln Components
Fin tubing - 200'. $5.00 per foot.
PRICE (U.S.)
$3,500.00
PRICE (U.S.)
$40,000.00
PRICE (U.S.)
$1,000.00
16574
2 Nyle Doors 27 3/4" for door opening of 10'X6". $5500.00 each.
Updated
$5,500.00
Michigan
16579
New
6 Fans, 3 phase motor. $250 each.
$1,500.00
Michigan
16581
New
Ebac single phase dehumidifier kiln unit for 5000' kiln. Includes electrical. No fans included.
$2,500.00
STATE
AD #
Laser Sights
PRICE (U.S.)
Oregon
15173
STATE
AD #
Laharco Model 8200BB laser with power supply, 115V 60Hz, 0.5A. Works fine.
Loaders, Knuckleboom
$550.00
PRICE (U.S.)
Georgia
13288
1985 Precision Husky Brute XL235 20,000 lb. knuckleboom loader, newer 1996 Cummins
4BTA diesel engine, mounted on self propelled carrier.
Kentucky
15244
Hood Model 24000 knuckleboom loader, on highway-capable rubber with 5th wheel trailer
hookup, joystick controls in operator cab, self propelled, includes log bunks with tag-a-long
cutoff buck saw, John Deere diesel power.
$39,500.00
Maryland
13826
Prentice 110 knuckleboom loader, PTO, mounted on 1962 GMC cabover.
$3,500.00
Minnesota
14744
Prentice G, upgraded to a 110 series, includes new rear A-frame, new boom gear, many new
parts, 20' log bunk rails with cross members.
$7,500.00
North Carolina
13460
Prentice knuckleboom on self propelled carriage, 6 cylinder Cummins diesel power. Loader
needs work. Carriage in good working condition.
$14,000.00
Oregon
14746
2002 Metavic gooseneck dual axle 20,000# trailer with 1400 knuckeboom loader, 14' boom,
18' bed, 13 HP Honda electric start gas engine. $45,000.00 comparable new.
$18,500.00
STATE
AD #
Loaders, Track
PRICE (U.S.)
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$19,500.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 19
British Columbia
13827
Barko 475 tracked log loader, button-top grapple, 230 HP Cummins 6CTA8.3 diesel power,
235 Cat undercarriage. Around 30,000 hours. Good running condition. Can see in operation.
91,000 lb. shipping weight.
$14,000.00
Iowa
14097
2006 ASV RC100 3800# tracked skid loader with rubber, 99.5 HP, 2700 hours, runs fine,
75% undercarriage. 10,200 lb. transport weight.
$22,500.00
Kentucky
16608
New
John Deere 350 Crawler Loader (track) with forks and bucket. Some wear on undercarriage.
Engine rebuilt recently. Good working condition.
$9,500.00
Kentucky
16510
John Deere 555A Crawler Loader with 4 in 1 bucket and GP bucket and log forks. 78 HP
diesel engine. 7300 hours. Excellent machine.
$18,500.00
Michigan
16420
John Deere 555A: Under 400 hrs on engine rebuild, winch has new brake and pump, needs
u/c work
$10,000.00
Michigan
16419
John Deere 555A Dozier: Forks only, Inframe rebuild 440 hrs ago, new front idlers and top
rollers, just rebuilt left final drive, new water pump, just rebuilt hyd pump and trans pump,
needs new turbo
$12,500.00
Ohio
16022
Rayco C 85 L 2002 steel track crawler/loader. 1011 Deutz diesel engine approx 1000 hrs.
Has bucket, forks, and counter weights. Full cab with heat. 40 gallon hi flow hydraulic
system.
$34,000.00
STATE
AD #
Loaders, Wheel
PRICE (U.S.)
British Columbia
13470
1993 Kaldnes SL9000 short log handler/log stacker, 360-degree grapple, 3406 Cat diesel
engine, 45,000 lb. capacity. Around 20,000 hours. Engine and major components rebuilt.
Not used heavily since rebuild. Good condition. Can demonstrate. Approximately 140,000 lb.
shipping weight. Can be disassembled for shipping.
$45,000.00
Illinois
16391
Buhler B56 Articulating Wheel Loader with sunroof, bucket, and fork.
$24,500.00
Illinois
16283
Timberjack Wheel Loader 1500 with Cummins 5.9 diesel engine. Lifts 1600' lumber. Used
daily.
$13,500.00
Illinois
16248
CAT IT18B Wheel Loader. Includes 'Quick Attach', Buckets, and Forks. Approx. 15000 hours.
Tires in Fair Condition.
$32,000.00
Kentucky
16592
New
John Deere Wheel Loader, heavy duty. Needs some repair but in running condition. Diesel.
$2,500.00
Mississippi
16335 Clark 85 Bigwheel Loader with bucket that are 6'9". Brakes need work. Bucket with opening
Updated of 48" X 94".
$10,500.00
Reduced
New York
16071
1975 Soderham Forwarder 353, Prentice 500 log loader, 353 Detroit diesel. Motivated seller.
$12,500.00
Ohio
16442
Pay Loader. International Hough H30 with 4 wheel drive, bucket, forks, bidirectional 3
speed power shift and transmission.
$10,000.00
Ohio
15965
Waldon wheel loader with < 325 hours, tires fairly new, 15000 lbs lifting capacity, diesel
engine with turbo, includes bucket and forks
$24,500.00
South Carolina
16181
John Deere 544C Loader Forrest Package, L28 Skidder Tires. Comes with Forks with Clamp,
Blade, Bucket, 26" Roanoke Directional Sheer, and Roanoke Buncher.
$23,500.00
South Carolina
16180
Clark Bobcat 1080 B Feller Buncher, Cutting Diameter 16" with Accumalator John Deere
Engine.
$7,000.00
Texas
11654
2004 Case 621D wheel loader, 4' forks with log clamp and bucket, 6000 hours.
$85,000.00
STATE
AD #
Log Decks
PRICE (U.S.)
Illinois
16026
30' Log Deck (stationary), 2 strand, 32" center to center. Comes with either Hydraulic power
or 3 phase electric power unit. Good condition.
$3,500.00
Pennsylvania
16134
Live deck with hydraulic unit
$4,000.00
Virginia
16277
22 ft 3 strand log deck with drive no power
$3,000.00
STATE
AD #
Log Home Manufacturing
PRICE (U.S.)
Alabama
16488
Complete Log Mill. Includes conveyors (loading and unloading), all electrical starter motors
(without the main breaker). Air compressor recently taken out of service. The mill comes
with 30-40 sets of detailed blue prints. It cuts an 8" log half round D shaped in and out,
debarks and cuts groves all in 1 motion. The mill will take logs 10-12-14 foot long. The motor
is a 150 HP electric. Mill in good condition.
$47,500.00
STATE
AD #
Log Turners
PRICE (U.S.)
Michigan
16397
STATE
AD #
Lumber Stackers
PRICE (U.S.)
Indiana
15921
STATE
AD #
Mortisers/Drill Presses
PRICE (U.S.)
Bar style log turner, includes cylinder.
Two rotating stacking racks.
$800.00
$3,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Pennsylvania
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 20
Tenon Machine made by L-Power and Co, Philadelphia, AP. Also a Mortise machine made by
16151 Heath Machine in Montrose, PA. Both machines sold by Briggs machinery in Pittsburgh, PA.
Updated Both machines are heavy cast iron and rein fair shape. Outfit would work to make wooden
windows or panel doors.
STATE
AD #
Kentucky
16224
SCMI Superset 23, Year 1999. 5 Head Moulder. 5 X 9. Converted to line shaft by Hoover
Repair. Excellent condition.
$29,000.00
Louisiana
14865
2009 Logosol PH-260 4-sided moulder, 3-phase power, chip extractor, extended tables,
moulding knives and tongue & groove knives included. Original owner. 10 hours.
$11,250.00
Michigan
14550
Bridgewood 2" x 6" 4-head moulder, lineshaft ready. Includes extra heads and knives for
tongue & groove, crown moulding, dowels, and a few other applications. Also includes Jet
4-bag sawdust collector.
$6,950.00
Michigan
10406
1983 Weinig Model U-17 7-head moulder, 4"x6" capacity. 3-phase power. Good condition.
$7,500.00
Minnesota
13061
Smithway XL 2"x4" 4-sided moulder, two 5 HP 3-phase motors.
$2,250.00
Mississippi
14854
2006 Logosol PH-260, 3-phase electric, includes chip extractor and extended tables, knives
for tongue & groove, crown moulding.
$8,250.00
New York
16440
Weinig Unimat 22A Five Head Moulder. 5" X 9" lineshaft set up. Includes a 100 HP 5 cyl
Deutz diesel with clutch. Both machines in good running condition. Also includes knives to
mill log siding, hardwood flooring, and other moldings. Moulder has chrome bed and
varispeed feed.
$13,500.00
North Carolina
16203
2004 Logosol PH260. Includes basic tooling, S-4S knives, in feed and out feed tables, chip
extractor, Electric 3 phase - 280 V. Original owners.
$8,500.00
Pennsylvania
16004
Model 405 Diehl 5 head, 6" X 9" moulder, includes ductwork, 30 HP Cornell blower, all
electric - 3 phase 220/440. Still Operating.
$12,000.00
Quebec
9421
Yates American C-4, 4" x 8" capacity, 600 volts, 2 x 7.5HP on top and bottom + 2 x 5HP on
each side, direct drive, variable speed, all on bearings, 100 % rebuilt. Like new.
$6,850.00
Reduced
Washington
14707
Smithway Excel 2"x4" 4-head moulder, excellent condition, includes profile knives for
tongue & groove, picture frame, base and casing, sawdut blower with ductwork, 20 HP
3-phase on top and bottom heads and feed, 5 HP on side heads.
$3,500.00
Washington
6247
Smithway XL 4-sided moulder, handles 2"x 4", all single phase, 5 hp drive, 1/4 hp feed. Will
trade for band sawmill.
$1,200.00
Wisconsin
Moulders
$1,800.00
16560 Logosol PH 360 - 4 Head Planer/Moulder with Chip Extractor and 30 HP Phase Converter.
Updated Includes duct work to plumb in the chip extractor, tooling and knives.
PRICE (U.S.)
$16,000.00
Wisconsin
15650
Logosol-PH260, includes setting rule, setting block, and $2,000.00 in tooling. No power.
Lineshaft ready.
$7,500.00
Reduced
Wisconsin
11746
Hermance 8"x12" 4-sided moulder, newer style bearings, lineshaft ready, includes knives for
tongue and groove, log siding, log home patterns. No power.
$7,500.00
Wisconsin
14571
Matison 276 4-head moulder, power feed, 10 HP on top and bottom heads, 5 HP on side
heads, 5 HP on feed, includes tooling for tongue & groove, V-notch panelling, and planing,
dust collection system with metal piping, blower not included.
$7,500.00
Wisconsin
14742
KTM 5-head moulder, 20 HP 3-phase power on horizontal heads, 15 HP on vertical heads
240V, push-through, 1.5 HP variable speed feed, some moulding knives included
$2,500.00
STATE
AD #
New York
15090
STATE
AD #
Michigan
14171
STATE
AD #
Mulch Manufacturing/Coloring
Color Critter attachment for Bandit Beast grinder, includes digital readout monitor and
controls. $18,000.00 comparable new.
Package Saws
2 Holtec 7 foot bars, 1 is brand new and runs 063 chain, and the other is used and includes
2 carbide chains.
Pallet Manufacturing
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$3,500.00
PRICE (U.S.)
$1,000.00
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 21
Arkansas
16591
New
Complete Pallet Cutstock Operation: Hydraulic Swing Chop Saw - custom built in Tipton Mo.
> 10" blade, in feed/out feed rollers, hydraulic swing from top. Includes extra blade. Run by
same hydraulic power pack that runs green chain. Green chain, 2 stand with center support,
approx 15' L X 8' W with hydraulic power pack that runs the chop saw and green chain.
Hydraulic power pack is 5 HP, 3 phase motor and can be wired for 240/480. 2 Double Head
Resaws - they work together as a 4 head resaw. Has return. Capacity is 6" wide by any
length. Each head has a 20 HP phase motor to = total of 80 HP. Hydraulic power pack is 5
HP, 3 phase motor. Double Head Notcher with Unscrambler. The heads are moveable.
Includes 2 - 20 HP 3 phase motors. This was custom built by Practical Products. Blower
System with 40 HP 3 phase motor. Approx 125' steel piping in sections, 18" dia and approx.
60' out feed pipe at 18" dia. Round Table, 10' dia with 3/4 HP single phase motor. Radial
Arm Saw with 3 HP 3 phase motor. Has thick blade and is used as a banding strip notcher.
Deduster, inline with approx 6" brushes. Has 3 brushes - 2 on top and 1 bottom. All motors
include starter boxes/electrical boxes/control boxes.
Kentucky
15994
Pallet jig: Nail-ease. Stringer pallet with block pallet attachment.
$2,000.00
Reduced
Kentucky
13747
Cutstock operation: Merchandising system with hydraulic 36" bar, 20' 2-strand infeed deck
with stop & load, 20' 2-strand greenchain, 20 HP 3-phase, 21 Saw Shop 36" circular scragg,
both saws are movable by lever, 7 HP sawdust blower, 30 HP 3-phase on each saw, handles
logs up to 15" diameters x 9' length.. Double end trimsaw with loading platform, includes 4
sets of 20" saws, 1 movable saw, 3 HP 3-phase on each saw, Smith single head band resaw
with return, 15 to 20 HP 3-phase power, followed by Morgan single head band resaw with
return. Includes 75 HP 3-phase converter and three 30 HP 3-phase converters, all electrical
wiring, boxes, and starters. Can produce 6,000 to 7,000 bf of cutstock daily.
$45,000.00
Kentucky
15502
1998 Rayco Edge automatic pallet machine with stacker and 10' live outfeed table, 5 HP
3-phase 460V
$12,000.00
Reduced
Kentucky
15182
Custom built pallet jig for assembling hand-made pallets. Have averaged 20 pallets per hour.
Ohio
11233
1996 GBN Explorer complete with stacker. Always in a building. Can see running. Capable
of producing 1000 pallets daily with 3 operators. Original owner.
STATE
AD #
Michigan
Pallet Recycling Equipment
$35,000.00
$400.00
Reduced
$79,500.00
PRICE (U.S.)
SmartProducts Pallet Dismantler 56" Capacity. Can tear down 1000 - 1500 pallets per day.
16569
28 HP Honda gas engine with 30 hours. Original tires. Mint condition. Has been used with
Updated
ad #16570, SmartProducts Trim Saw.
$7,600.00
SmartProducts Trim Saw with 8 HP Honda gas engine. Amish ready. Low hours. Has been
used with ad #16569, SmartProducts Dismantler.
$7,950.00
Michigan
16570
STATE
AD #
Indiana
16331
Bob Hanna double head notcher with two 20 HP 3 phase electric motors. Has unscrambler
feed, indexible teeth and blower system. Notches approx. 2500 stringers per hour.
Minnesota
16503
Morgan single head notcher
STATE
AD #
Michigan
16525
STATE
AD #
Pallet, Notchers
PRICE (U.S.)
$15,500.00
$2,700.00
Pallet, Stackers
Automatic FMC Pallet Stacker. 3 phase power. Can stack up to 60' x 72" pallet.
Phase Converters & Electrical
PRICE (U.S.)
$1,700.00
PRICE (U.S.)
Alabama
15557
135 HP phase converter with 100KVA 480V transformer.. Currently running 18 motors off
this system.
Alabama
15558
60 HP phase converter
STATE
AD #
Planer/Moulder/Knives
PRICE (U.S.)
Georgia
16024
Profimat 22 N planer moulder with 5 heads, computer controlled, 3 - 25 HP electric 3 phase
motor, 9" X 6" capacity, approximately 1000 blade sets. Also includes Profile Grinder R 930.
$18,000.00
STATE
AD #
Planers
PRICE (U.S.)
$10,000.00
$2,200.00
Alabama
16522
Pineiro 4-sided planer 8"x12" capacity, 7.5 HP motors, sawdust blowers with piping, 25 HP
3-phase
Alberta
10122
Forano 6-head 4"x12" planer/moulder, 12" top and bottom planing heads, 3" side heads with
various profile knives, belt drive, 75 HP 3-phase feed, sawdust blower, 35 HP. Includes all
manuals. Serious offers considered.
$6,000.00
Reduced
British Columbia
16089
Yates planer: 12 knife top and bottom, belt drive, new chrome feed rolls and bed plates, 6 x
12 opening, several spare side heads and belts
$8,000.00
British Columbia
13071
Rexon single head 8" x 16" surface planer.
Colorado
13745 Pinheiro 800/MF24" double surfacer, complete with electrical panel. One head has quick
Updated change knife and the other has corrugated. Never used since complete rebuild.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$22,000.00
$900.00
$8,000.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Colorado
Iowa
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 22
Newman M-68 4-head planer-matcher, 6"x12" capacity, Direct motor drive, 10hp feed. 40
top 20 sides bottom, no direct drive motor. Serial # 12947. Converted top and bottom to slip
13743 on heads 2-1/8" with all hydro sleeves and ran all motor controls on variable-frequency
Updated drives. Machine was modified to run hardwood flooring. Top and bottom spindle. Includes
hydrolock sleeves for removal of heads, top profiler and many extra parts from another
machine.
13584
J.A. Fay & Egan 666 Lightning 4-sided planer, all hydraulic with 500 gallon reservoir, 200
HP John Deere diesel power unit, low hours, sawdust blower with 16" piping from each
outlet. Includes knives for producing 6"x8" D-Log profiles.
$8,000.00
$50,000.00
Kentucky
Yates-American A-20 8"x15" four-sided planer, two profile heads, bottom head needs some
15404
work. Include knives for t&g, D-log, knives, some chrome tables, sawdust blower with piping.
Updated
Converted to V-belt drive. Powered by 6-cylinder Continental diesel power.
$8,500.00
Louisiana
Newman Whitney S-382 Planer: - Maximum Feed Opening: 30" x 6" - Minimum Stock
Thickness: 3/8" - Minimum Stock Length: 51" (48" when Butted) - Minimum Feed Speed: 80
fpm - Maximum Feed Speed: 300 fpm - Six (6) knife, high speed steel 7"cutting circle - Top
Cutterhead: 60 hp, 3600 rpm @ 60 Hz TEFC premium efficiency direct coupled motor. 16490
Bottom Cutterhead: 40 hp, 3600 rpm @ 60 Hz TEFC premium efficiency direct coupled
Updated
motor. - Three pneumatic tire top rolls approximately 16" diameter with 1-1/2" independent
yield and three 14" diameter steel bottom rolls. - Top rolls are powered by two 15 hp helical
gear motors with AC variable frequency drives. -Also available: compatible cyclone dust
removal system includes cyclone, piping, & Phelps fan.
$40,000.00
Reduced
12753
Whitney 2-sided planer, 30" knives, 15 HP on top, 10 HP on bottom with controls and
disconnects. Removes 13/16" per cut, includes sawdust blower. Can use either as rough end
or finishing planer.
$18,500.00
15926
Woods 412 planer matcher: 4 sided planer 6"x15" cap., set up at 80lf per min., ran in white
cedar mill for 25 years, 1 13/16 spindles, 6 knife top and bottom heads, 35 hp top, 20 hp
bottom, 15 hp on side heads. Converted to 480 volt electric motors with v-belts v-match, s4s,
3'' t&g, shiplap, 6/4 eased edge, 5/4 eased edge tooling with extra side heads. Includes all
electrical, 42" blower w/50hp 480v motor 215 kw 3phase gen set with 12.7 liter 60 series
Detroit. 849 hours on brand new generator end. Michigan Knife Co. knife grinder. All
equipment in excellent overall condition
$22,000.00
Reduced
Maine
14067
Soucy 4"x12" 4-sided planer,V-belt drive with chain governor, includes tooling for planing up
to 8" material, T&G at thicknesses of 3/8", 1/2", 3/4", decking of 5/4" and 6/4", rounded edge
of 4x4". Includes two sawdust blowers with piping. Power not included. 50 HP power
requirement.
$4,000.00
Reduced
Massachusetts
16321
Planer Out-Feed Belt: 18" wide, 4 ft long planer out feed belt
Michigan
16454
Vonnegut planer 4 X 6
$5,000.00
Michigan
10405
Powermatic Model 225 8" x 24" Quiet Head single sided planer/surfacer, 15 HP 3-phase
power. Low hours.
$7,000.00
North Carolina
8718
Hermance 8"x10" 4-sided planer, belt feed. Some Babbitt may have been changed to newer
bearing. No power. Currently on skids. Approximately 4,000 lbs. transport weight. Will
consider trade for Newman Model 500.
$5,000.00
Oregon
11663
Powermatic 8" x 20" single sided planer/surfacer, 7.5HP 3-phase power.
$1,200.00
Pennsylvania
16567
Greaves. Klusman & Company single side planer with 2 Knives. This is a very early model
planer in excellent working condition. 24" wide x 8" opening.
$1,995.00
Pennsylvania
16443
Delta 24" 4 knife planer. Cuts up to 8" thick. Line shaft ready. Includes high speed steel
blades, low hours.
$3,000.00
Pennsylvania
16006
Buss 30" planer #44 6" X 30" single helical, 3-phase 220/440; Still operating. $3,000.00
$3,000.00
Pennsylvania
15484
Newman Model 500 6"x15" 4-sided planer with pineapple feed table, belt drive, shiplap and
profile heads, no power.
$9,500.00
Pennsylvania
15104
Whitney Model 32A 8"x30" single sided planer/surfacer, 3-phase power, belt driven, Babbit
bearings in good condition. Includes knife sharpener.
$3,000.00
Saskatchewan
7991
Newman 512 belt driven 8 knife planer, all ball bearing, top & bottom jointers, side head
jointers, double pineapple feed table, big blower & piping, 3 speed transmission, hook to
feed works w/reverse, 2 sets tongue & groove side heads. Needs new belts. Good condition.
$22,000.00
Saskatchewan
10650
Mattison Model 222 6" W x 12" H 4-sided planer, Reeves VariSpeed feed, 480V 3-phase, 4
10 HP motors, 5 HP feed motor, sawdust blower. All on its own covered trailer (mobile).
$5,500.00
South Carolina
16178
A66 Yates American Motorized Planer, 12 Knife Bottom/Top Head. Bottom/Top Profile.
Several Extra parts.
$7,800.00
Tennessee
10342
Yates-American A-26, 8"x12" capacity, outside ball bearing, belt driven, good condition,
includes all kinds of knives and sawdust blower with piping. Offers considered.
$10,000.00
Louisiana
Maine
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 23
Washington
14805
Belsaw 6"x 12" single sided planer, 5 HP single phase 220V, mounted on scissor lift.
Includes infeed and outfeed roller beds.
$1,500.00
Wisconsin
16563
24" 3 knife surfacing planer, No power. Was used on line shaft. 2 speed feed. Includes Dust
Hood.
$1,900.00
Wisconsin
16303
Northfield, size 240 commercial 24" heavy duty double surfacer/planer with Reeves drive. 40
HP top head, 30 HP bottom head, 15 HP drive. Helical, spiral heads, with sharpener
included. Excellent condition.
$18,500.00
STATE
AD #
Post & Rail Manufacturing
PRICE (U.S.)
California (North)
15222
Complete Post & Rail processing operation: Rail assembly press, 12' capacity, 2 air cylinders
3400 psi, each. (need 100-110 psi only) . Footprint: 45" width x 12'10" length x 7'9" height
(8'6" with guard up), rail height capacity up to 39". Ritter line boring machine, 13 spindles,
10mm shaft size, 2" o.c. (on center), positive stop, can drill 5 holes at 6" o.c., 4 holes at 8"
o.c. and 13 holes at 2 o.c., extruded aluminum track and slide blocks, easy adjustments, air
100-110 psi, 3 HP 3-phase.motor almost new. $600.00 in new bearings Custom steel tables,
1 set of 1-1/2" carbide drills,2 sets 2" (50mm) carbide drills. Tenoner, new, 5 HP 3-phase.
Cuts 8-10 tenons per minute, 1-1/2" cutter head with extra set of knives, powerful custom
made clamp for 2" to 5" material, linear bearing 1" rod sled, cast iron stand, room for double
head cutter, footprint: 20" x 106" x 56" high, 5 HP 3-phase. Woofer II, sharp carbide
cutterhead, 3450 r.p.m., 2 HP single phase 220V., well maintained.
$22,000.00
Kentucky
16506
Dyna Post and Rail 3 in 1 machine with tenoner, chop saw, and drill press. 24 HP Honda gas
engine, Double Drum Sander. Many additional supplies that will help someone who is
starting up a log furniture business. Machine will in use. Runs well.
$12,000.00
Wisconsin
11776
2004 Dyna Post & rail processor, never really used, just tested on a couple pieces. Includes
tenoner, drill press, 24" chop saw, 20 HP Honda gas engine. Also includes extra square
shoulder head which cost an additional $2000.00 and a separate double head sander with
5.5 HP Honda engine. Over $16,000.00 new.
$11,500.00
STATE
AD #
Arkansas
16152
Post Peeler
Morbark PSA Post Peeler 1999 model. Forest Tool and heavy duty peeling head. Electric 3
phase.
$16,500.00
STATE
AD #
Alaska
14568
671 Detroit diesel power unit, PTO with clutch, 275 HP.
$2,500.00
Georgia
16199
Cummins 400 Diesel Engine with W900 Kenworth Truck. Motor in good condition. Truck is
rough.
$2,000.00
Reduced
Illinois
Power Units, Diesel
PRICE (U.S.)
16527
Perkins 354, 6 cylinder engine with turbo. 110 + HP. Good running condition.
Updated
PRICE (U.S.)
$1,700.00
Indiana
16459
671 Detroit (direct drive PTO). from a truck with transmission and clutch on a portable 2
wheel cart.
$2,500.00
Iowa
15895
D13000 Cat diesel engine, 129 HP. Hours 3510.
$3,000.00
Iowa
15787
671 Detroit electronic turbo skid mounted, clutch, complete
$6,500.00
Iowa
15402
John Deere 4039, 96 HP on 2500 rpm, includes radiator, air cleaner and clutch, zero hours
on factory reman. Factory warrenty until January 2015 or 2,000 hours.
$8,000.00
Kentucky
15997
3 cylinder Deutz Diesel with clutch. Good running condition.
$3,500.00
Michigan
16053
353 Detroit with hydraulic pump not turbo charged
$1,500.00
Michigan
15406
453 Detroit diesel power on its own axle, U-joint for power. Self contained. Runs good.
$2,500.00
Reduced
Michigan
15988
236 Perkins diesel, 4 cyl engine. Stub shaft, no clutch. Engine rebuilt and has 0 hours. Comp
to 75 HP.
$3,500.00
Michigan
14016
Mercedes 30-35 HP 4-cylinder diesel engine with radiator, removed from reefer trailer.
$1,900.00
Reduced
Minnesota
15288
471 Detroit with radiator and new head, water cooled. 60 hours usage since head was
replaced.
$2,000.00
Missouri
16084
62 HP International diesel with speed clutch. Good condition
$3,000.00
Montana
9786
250 Cummins diesel power on its own axle. Less than 100 hours on end frame motor
overhaul. 10-speed transmission w/PTO shaft. Full gauge package.
$2,800.00
New York
15743
6V-53 Detroit, complete with clutch and transmission. Runs good.
$2,000.00
New York
14962
240 Cummins with starter and alternator. Was running fine when removed from service.
$1,600.00
Ohio
15353
Buda 6 cylinder diesel engine
$1,400.00
Ohio
16270
Diesel Power Unit
$2,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 24
Ohio
15625
John Deere 6068H, SN PE6068H550323, maybe 200 hours. $34,000.00 comparable new.
$14,000.00
Ohio
15304
Cummins 6B5.9T 200 HP, includes clutch, 6500 hours.
$7,000.00
Pennsylvania
16611
New
353 Detroit unit/compressor. Complete rebuild. 105 HP. No turbo. Skid mounted.
$3,995.00
Pennsylvania
16610
New
3304 Kent Engine for I lift. Turbo. Rebuilt. Goes in to 955 L track loader.
$6,995.00
Pennsylvania
16606
New
John Deere 4 cyl power unit with 105 HP. Skid mounted.
$3,500.00
Pennsylvania
16380
671 Detroit Diesel with rockford hand clutch. 250 HP. Clutched recently reworked. Skid
mounted, adjustable stands. No turbo.
$4,500.00
Tennessee
16401
Detroit Diesel Generator with 6 cyl 175 KW and 948 original hours.
$7,500.00
Tennessee
14420
Lister 6-cylinder diesel engine, air cooled, skid mounted, hand clutch included.
$3,000.00
Reduced
Virginia
16415
Detroit power on mounted on wheels, 1102 actual hours. New clutches.
$5,500.00
Reduced
Wisconsin
16458
DT362 International Motor . Diesel, Turbo, Skid Mounted, No Clutch. 6 cylinders. 150 HP
with 2200 rpm. Runs well. About 3500 hours.
$2,700.00
STATE
AD #
Georgia
16059
125 HP electric motor with programmable soft start
Illinois
16027
Electric power unit with attached gear box
Illinois
14797
GE 125 HP 3-phase motor. Good running condition.
$1,050.00
Illinois
14796
Lincoln 125 HP 3-phase motor. Good running condition.
$1,050.00
Indiana
15410
Lincoln 444T 150 HP 3-phase motor, 1780 rpm, 460V.
$1,250.00
Reduced
Michigan
14326
40 HP Worldwide Industrial 3-phase power unit, 230/460V, 3555 RPM, completely enclosed.
$1,150.00
MIssouri
16449
50 HP 3 phase electric motor
$500.00
New York
14300
30 HP 3-phase electric motor, like new.
$450.00
Ohio
16413
Set of 3 phase electric motors off model 221 Powermatic Planer. Motors in good condition.
$400.00
Pennsylvania
16262
20 HP Lincoln, 1750 RPM, 256 T, 230/460 V, 3 Phase Electric Motor. TV 5173. Runs good.
Pennsylvania
15221
Fukuta 20 HP 3-phase motor, 1760 rpm, 22/440V. Only 40 hours. Like new.
$1,000.00
South Carolina
16169
100 HP Electric Motor, 3 phase, 230/460 V, Lincoln 1770 RPM
$1,000.00
South Carolina
16170
125 HP Westinghouse Electric Motor, 3 phase, 460 V, 1185 RPM
$1,250.00
South Carolina
16171
150 HP Electric Motor, EPQ, 3 Phase 230/460 V, 1785 RPM, Frame #445T
$1,500.00
South Carolina
15154
75 HP 3-phase electric motor, 1100 rpm, double arbor.
Wisconsin
15968
3 Electric Motors and Components: 20 HP, 3 phase, 1750 RPM, 230 - 460 Volts, 50 to 25
Amps. Motors came off a Baker band resaw. Includes 2 control stations and fuse/connection
box.
$1,500.00
STATE
AD #
Power Units, Gasoline
PRICE (U.S.)
Power Units, Electric
PRICE (U.S.)
$2,250.00
$950.00
$850.00
$750.00
Illinois
15303
Wisconsin VH4D 4-cylinder, air cooled gasoline engine, 30 HP at 2800 RPM.
$1,800.00
Michigan
16473
Wisconsin 4 cyl air cooled gas engine. Includes hydraulic pump.
$1,000.00
Pennsylvania
14629
Le Roi B201 4-cylinder gas power unit on wheels, 30 HP, crank start, includes reduction
clutch. Runs good. Serious offers considered.
$1,500.00
STATE
AD #
Power Units, Generators/Gensets
PRICE (U.S.)
Colorado
13208
Kohler 22 KW genset, hooked up for natural gas with converter for propane, includes
primary/backup converter box, 381 hours.
Connecticut
12162
85 KW Mitsubishi genset, 100 gal fuel tank.
$7,500.00
Illinois
15865
Genset generator take out. Run 500 hours. Model #50DGCH
$1,500.00
Kentucky
150 KW genset, mounted in enclosed box on tandem axle trailer, 471 Detroit diesel engine.
15734
New battery. Only used as backup generator at a pump station. Second genset available
Updated
separately.
$2,900.00
Reduced
$10,000.00
Michigan
16600
New
200 kw Genset with new panel and Cummins diesel motor. Clean and low hours.
$12,000.00
Michigan
16057
Genset 5,365 hrs - John Deere D4045 165 HP Power Tech 4.5 liter engine with 100 kw Weg
generator wired for 480v 3 phase comes with disconnect. Good condition
$6,600.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 25
Michigan
16336
Kohler genset with 1700 original hours. 150 KW. Cummins diesel with 230 or 480 V 3 phase
electric power. Good running condition.
$6,500.00
Missouri
13713
250 KVA 3-phase genset, 480V, Cat 400 HP diesel engine.
$14,000.00
New Hampshire
14385
1999 Cat 500 KW genset with Cat 3412 8-cylinder 800 HP diesel engine, 480 volt. Only 125
original hrs on the unit. Perfect condition. Tested. $120,000.00 new. Standby switch gear
available separately.
$65,000.00
New York
15995
1999 Genset, 97 kw 480 3 phase, complete rebuild on 130 HP Deutz engine, 0 hours
$8,500.00
New York
16098
Falcon Power Generator with 15 HP Lombardini Diesel, 8000 watts
$2,200.00
New York
15575
400 KW John Deere Genset, 7100 hours, 1500 hours on total rebuild.
$25,000.00
Ohio
16513
35 KW Generator, 6 cyl White Diesel. Military Surplus generator.
Updated
$4,870.00
Ohio
16512
100 KW Delco Generator, 6-71. Diesel.
$7,900.00
Quebec
16451
Amada Diesel powered generator 8KW Freshly serviced by licensed mechanic
$3,500.00
Virginia
16253
400 kw spectrum generator with 635 HP detroit 60 series engine. has little over 7,000 hours.
in excellent condition with 500 gal fuel tank. Also has 1000 amp breaker in enclosure never
used.
$25,000.00
Reduced
STATE
AD #
Power Units, Hydraulic
PRICE (U.S.)
British Columbia
Michigan
Ontario
Tennessee
24, 5 HP hydraulic motors with speed controllers, 1" shaft, includes 1/4 mile of 3/8"
15374
hydraulic hose of variable lengths. Everything brand new. Will sell motors in lots of 5 for
Updated
$1,000.00 firm per lot or $12,500.00 for everything.
$10,500.00
Reduced
16526
140 gal hydraulic tank with Vickers hydraulic pump. 3 phase power. 1 1/2" outlets.
Updated
$1,000.00
15476
$8,000.00
15163 1987 International/Navistar DT-466, 150 HP, cranks and runs fine, includes inline injection
Updated pump, Detroit-Allison 5-speed automatic transmission with radiator and starter.
STATE
AD #
British Columbia
13074
Missouri
50 HP hydraulic power pack 550V
Radial Arm Saws
Dewalt industrial radial arm saw, length gauge stops guide.
$1,600.00
Reduced
PRICE (U.S.)
$900.00
15011 DeWalt radial arm saw, two 16" blades, additional 16" and 13" blades that need some work,
Updated 7.5 HP 3-phase power 440 V.
$1,000.00
Reduced
14" Delta Radial Arm Saw with 5 HP, 3 phase electric. Mfg in 1998-99. Has been is storage
past 7 years but did work well when last used.
$2,600.00
New Jersey
16402
STATE
AD #
Wisconsin
16145
STATE
AD #
Resaws, Runaround
PRICE (U.S.)
Michigan
16554
Fast Line Gator 204 Resaw with runaround, cuts 14" - 14" cants. Runaround will cut up to
16' stock. Includes a 6 cylinder Cummins with Rockford clutch, hooked to power pack and
pumps 66 gpm. Hooked up with lineshaft but also has electric motor. Set up behind portable
mill with rollers behind band mil which go to an unscrambler and then to runaround. 24'
green chain included.
$55,000.00
STATE
AD #
Resaws, Single Head
PRICE (U.S.)
Arkansas
11298
British Columbia
Resaws, Four Head & Larger
2006 Brewco Big Band 4 Head Resaw. Each head has 20 HP 3 phase electric motor. 28"
band wheels. Uses 1", 1 1/4", 1 1/2" bands. No return or hydraulic pack. Does have electric
actuator for head lifts. Approx 15000 hours.
5' Prescott resaw, 2 extra 10" bands. No power.
2002 Polvsen 20"x20"" single head band resaw with complete runaround, 28" x 3" thick steel
wheels, runs 1 ½" to 3" blades, 25HP 3-phase, hydraulic setworks, potentiometer, 24" x 16’
friction in feed belt with variable speed control, weighted hold down wheels for the in feed
& out feed, resaws down to 1/8" thickness. Includes high capacity resaw transfer system: In
8513
feed deck assembly consists of 16’ x 16’ x 8’ 3-strand hydraulic infeed deck,5’ x 20’ steel
Updated
walkway, 36" x 4 roller arm belt/lifting transfer,14" x 24’ speed belt trough,24’ roller in feed.
Outfeed consists of 5' x 10' 6 roller outfeed table. Belted return trough, 16" x 35’. Air kickers
within roller case for returning material, landing table for infeed. Easy to breakdown and
load.
British Columbia
15371
Custom built horizontal/vertical 8"x12" twin band resaw, purchased brand new and never
run, designed to run one vertical and one horizontal band in tandem for resawing cants into
specialty products, 8" live infeed belt with side-press rollers and side belt, 24" bandwheels,
set up for 3" bands, two 25 HP 3-phase motors 550V on the bands, 10 HP hydraulic power
pack.
Illinois
16479
Morgan Single Head Resaw. No return. No power.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$20,000.00
$10,000.00
$35,000.00
$13,000.00
Reduced
$5,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 26
Michigan
15541
Morgan single head band resaw with customized complete runaround, customized by
Morgan to handle cants 20" high x 16" wide, produces up to 6" cants, adjustable infeed
speed. No power.
$20,000.00
Minnesota
16501
Baker single head resaw, 12" X 12", with roller guides and line shaft set up.
$8,500.00
12086
Yates 48" single head band resaw, 40" bandwheels, pineapple infeed, tilts to produce siding,
40 HP. Includes 10 HP blower.
$7,000.00
Customized high production resaw, air over hydraulic, modular, precision machined, 20 HP
7554
3-phase w/soft starts. Handles 9"x17" cants. Cuts down to 3/4". Includes 36" band wheels, 7
Updated
feed rollers, 3 top-mounted hold down pressure rollers, and all electrical.
$8,500.00
Nova Scotia
Texas
STATE
AD #
Resaws, Three-Head
Kansas
16357
Baker 3 head resaw with return. 20 HP motors on all with starters, 2 safety stations, 1 box
blades. Very clean machine.
Wisconsin
16542
2012 Go Fast Resaw: 3 head. No return or runaround. Used for cutting pallet boards.
Includes Up Country Cornell 26" Blower, Deduster, Sizer and Chop Saw. Line shaft ready.
John Deere 115 HP turbo diesel engine. Available after May 1, 2015
STATE
AD #
Pennsylvania
16138
STATE
AD #
Resaws, Two-Head
Keystone double arbor resaw w/ sizer head includes blades and spacers. 100 HP electric
motor
Resaws, Vertical
PRICE (U.S.)
$28,000.00
$42,500.00
PRICE (U.S.)
$30,000.00
PRICE (U.S.)
California (North)
3424
1990 Forrestor 900 vertical band resaw, 36" wheels, 4" bands, 3-phase electric, customized
linebar, handles 12"x12" cants. No runaround. Produces 7000 board feet or more daily.
South Carolina
16179
60" Turner Resaw. Good Heavy Wheels, Center Cut, Offset cut, and Tilt Cut.
$7,500.00
South Carolina
16205
36" Robinson Resaw, 20 HP motor, 230/460 V.
$3,750.00
Ripsaws
$5,000.00
STATE
AD #
Louisiana
12752
Mattison 202 16" straight line ripsaw, 220 V 3-phase,
$5,500.00
New York
10583
Yates American 14" straight line ripsaw, 10 HP single phase.
$2,500.00
Pennsylvania
16005
Diehl Model SL52. 3 phase 220/440. Single blade, straight line rip blade, 3-phase, Still
operating,
$3,500.00
Vermont
14927
Mattison 202 straight line ripsaw, variable speed feed, new track and chain. Rips up to 4"
depth and 36" width. Can see running.
$2,500.00
Reduced
Wisconsin
14697
Marion straight-line ripsaw, good condition, includes infeed chain, lineshaft ready.
$3,500.00
Reduced
Roller Beds
PRICE (U.S.)
STATE
AD #
British Columbia
15705
12’ x 26" 5 strand UNHMW live roller deck, includes lifting motor and drive motor.
$4,500.00
Ontario
14053
Helle rollcase, hydraulic drive, 24" wide by 20' length, 6" rollers, using as sawmill outfeed
roller
$1,500.00
Sanders
PRICE (U.S.)
STATE
AD #
British Columbia
13070
Cantek single drum 24" wide belt sander, 1/8"to 5" capacity.
$4,500.00
MIchigan
16382
Timesaver Wide Belt Sander. 52" double head wide belt sander in good condition. Has 2
electric motors, 30 HP and 50 HP.
$25,000.00
New York
10594
Solem 32" drum sander, 3 drums, 8000# shipping weight, conveyor, 3-phase power. 4'x6'
footprint . Works like a planer but uses abrasives. Good for finishing sander for furniture,
millwork, doors.
$4,500.00
Pennsylvania
15896
Time Saver Speed Belt Sander, 36" wide belt, 75 HP electric motor, hydraulic power pack,
good condition
$16,500.00
STATE
AD #
Sash Gangs
Esther Sash Gang HD30 8 Roll Saw: The Esterer is a gang saw equipped with infeed and
outfeed rollers and is designed to make the sawing of large logs considerably easier. Could
include: -Corley log turner with hydraulic system -Armstrong saw grinder/sharpener -Edem
vibrating conveyor (44 ft.) -Plus all related parts to each piece
PRICE (U.S.)
PRICE (U.S.)
$40,000.00
Reduced
Alabama
16491
STATE
AD #
Sawdust Blowers
PRICE (U.S.)
British Columbia
13069
Sawdust system: Dayton 22" sawdust blower with 20HP drive, 20" uptake blower pipe,
around 75' of 6" to 12" sawdust piping, 5" dia x 22’ fine sawdust Cyclone with stand. Easy to
breakdown and load.
$9,500.00
Illinois
14654
Jacksonville sawdust blower, 25" inlet, 25" outlet, 54" fan 54" diameter x 18" wide, 2 7/16"
shaft. Excellent condition. No power. 150 to 200 HP power requirement.
$2,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 27
Kentucky
15827
Blower and big blower pipe, about 200 feet, 16 in diameter
$2,000.00
Michigan
16572
Morbark van loading Blower with 20 HP 3 phase includes fuse box. Good condition.
$1,500.00
Michigan
11097
Phelps chip blower, 20 HP 3-phase. Two available. $500.00 each.
Minnesota
16504
26" Blower with 10" in feed and 8" out feed.
$1,700.00
New York
14907
LeRoi sawdust blower, 6" inlet and outlet, includes piping, 20 HP 3-phase.
$1,500.00
Ontario
12372
TimberWolf sawdust blower, 6 inlet, 6" outlet, 1300 cfm, 3 HP 220 V. Original owner. Still
brand new. Never used.
$1,000.00
Pennsylvania
15025
Sawdust blower, 48" fan, 21" intake, 19" outlet. No power
Updated
$500.00
$650.00
Quebec
16476
Saw dust removal blower 4”. Motor 3400 RPM 3HP 550v.
South Carolina
15156
Phelps Model H 48" sawdust blower, flat belt drive
$1,000.00
Vermont
14928
Whirlwind sawdust blower, 8" intake, 6" outlet, at least 40' of heavy plastic piping, 15 HP
3-phase.
$700.00
Reduced
Virginia
16257
Reckard 36 inch dust blower
$3,500.00
STATE
AD #
Sawdust Collectors
Extrema DC-3,000 dust collector that’s never been used, miscellaneous spiral pipe
$700.00
PRICE (U.S.)
Idaho
16034
STATE
AD #
Massachusetts
16314
14" WIDE STICKER BELT
$200.00
Michigan
15815
Hobart Gen Style welder 200 amp, 3PH 220-440 volt
$200.00
STATE
AD #
Sawmill Components
Saws
$500.00
PRICE (U.S.)
PRICE (U.S.)
Arkansas
14284
56" headsaw, hammered for left hand.
$750.00
Michigan
16216
Upright Band Mill with 36" Throat, 3/4" Blade, 3 Phase Motor. As is.
$750.00
Minnesota
15290
54" headsaw, hammered for right hand,
$600.00
Missouri
9752
56" inserted tooth headsaw, good condition
$900.00
Vermont
14316
52" inserted tooth saw, hammered for right hand. Price firm.
$550.00
Reduced
STATE
AD #
Kentucky
15228
STATE
Scissor Lifts
PRICE (U.S.)
AD #
Scragg Mills, Band
PRICE (U.S.)
Maine
14159
1998 FastLine 4-saw band scragg, 1 1/'2" bands, sharp chain, setworks open from 4" to 12",
live 3-strand 16' infeed deck, automatic log turner, laser lights on second set of blades,
sawdust blower with piping, handles logs up to 24" diameter x 16' length. Can process 1500
4x4's per daily shift and 600 to 700 railroad ties per daily shift, more with automation.
Original owner. Equipment footprint of 12' width by 60' length. Two flatbeds required for
shipping. $140,000.00 new.
$85,000.00
South Carolina
16175
Shop Built, 3 Band Saw Scrag Mill, 3-15 HP motors pulling band, 1 - 15 HP motor pulling
hydraulic pack. Trailer, 8' x 20' Dovetail 3 single axles with pineal hitch. Additional $2100.00
$4,200.00
STATE
AD #
Scragg Mills, Circular
PRICE (U.S.)
Kentucky
7354
1997 Cooper sharp chain scragg, computer control w/auto setworks, outfeed w/optical auto
centering, two 48" blades, extra set blades, cab w/heat a/c. 480 v 3-Phase. Better on 12' or
less in hardwood and longer on straight softwood. Low usage. Can see running.
15131
Custom built scragg mill, sharp chain, handles logs 20' length x 20" capacity, automatic
reverse for second cut, heavy built on 12" frame, missing setworks, outfeed roller bed,
followed by Miner 6"x36" double bay gang edger, sawdust chain, maybe 50-60 carbide
tipped blades, 150 HP Chrysler industrial gas power unit.
$8,000.00
Reduced
Manitoba
13399
High production scragg mill, 30" blades with hydraulic controls, with bull edger with 24"
blades, portable on dual axle trailer, sharp chain, opens to 10" width, power infeed rolls,
power outfeed slab rolls, 40' length, 17 ton vehicle weight, 300 HP 1940's diesel engine.
Needs some work. Originally set up as 5-man operation. Was producing 15,000 board feet
on average per shift.
$9,500.00
Nebraska
16064
Morgan Scragg Mill: 30" circle blades, sharp chain, hydraulic adjustable blades, diesel
Lamborghini engine, trailer package. Cuts 9' logs, 14' log deck. Can demonstrate.
$18,500.00
Nova Scotia
12084
PHL 16' circular scragg mill with cab and SilvaTech computer setworks, sharp chain, infeed
and outfeed conveyors, two 50 HP motors. Handles logs up to 14" diameter x 16' length. Can
see in operation.
$33,500.00
Louisiana
Scissor lift, 4' x 8', 1000 lb. capacity.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$2,000.00
$100,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Saskatchewan
9979
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 28
Circle scragg, sharp chain, portable, 36" blades on double arbor, Chrysler gas powered
combine engine. Currently set for 6' length but can be easily adjusted to handle up to 16'
length.
STATE
AD #
Kentucky
16233
Shaker Screen - Fulghum 8 X 8 Chipscreen. Good condition.
$3,000.00
Kentucky
13548
Fulghum 5' x 5' double shaker screen with 5' round hopper, 3 HP 3-phase power 230/460
volt, 1 1/2" top screen and 5/8" bottom screen.
$4,500.00
Utah
15512
Soderhamn 6"x6" chip screen, 2 sets of screens 1" and 2"
$3,500.00
Reduced
STATE
AD #
Pennsylvania
15808
STATE
AD #
Screens
$14,000.00
Setters
Wood-mizer single tooth bandsaw setter
Sharpeners and Grinders
PRICE (U.S.)
PRICE (U.S.)
$150.00
PRICE (U.S.)
Michigan
16009
Vollmer - Band Saw Blade Sharpener
$4,000.00
South Carolina
16168
Michigan Knife Grinder. Good Condition.
$3,500.00
STATE
AD #
Sharpeners, Moulder/Planer Knives
New York
15681
Michigan Model 480 knife grinder for planer knives. 48" capacity, 460V 3-phase or 220V
with electrical box.
South Carolina
15671
Newman G130 knife grinder, good condition, 2 HP and 5 HP 220/440 V motors
STATE
AD #
Sharpeners, Narrow Band
PRICE (U.S.)
$3,900.00
$2,200.00
Reduced
PRICE (U.S.)
California (North)
15902
Dino bandsaw profiler 12 V and tooth setter. Good operating conditions, all parts included
except a grinding wheel.
Illinois
16343
Logosol Grindlux 4000 12 V automatic sharpener on stand with manual setter.
$1,100.00
Missouri
15549
Automatic sharpener, 110V, with manual setter, includes 1 brand new cam.
$1,250.00
New Mexico
16364
Osama AFS550-AF50 complete sharpening system (with saw set)
$2,250.00
Pennsylvania
16509
Automatic band saw sharpener, 110 V, Wood-mizer cam, 5 new grinding wheels.
$1,350.00
Sharpeners, Wide Band
$850.00
STATE
AD #
Arkansas
11303
Armstrong #17 grinder with 2 cams. Also sharpens trimmer and edger saws.
$1,500.00
Illinois
14223
Filing room equipment: Two Armstong air sweges for wide bands 6" or wider, Armstrong
shaper in good condition. Serious offers considered.
$2,000.00
Reduced
Virginia
12273
Two #220 Hanchett left hand grinders with stands. One #230 Hanchett right hand grinder
with stands.
$4,000.00
Wyoming
10685
Hanchett #5 sash gang grinder, 3-phase power.
$2,500.00
STATE
AD #
Shavings Mills
PRICE (U.S.)
PRICE (U.S.)
15246
Severson shavings mill, designed to produce complete curl shavings from 6" and smaller
wood waste and scraps. 10 HP 3-phase. Low hours.
$14,000.00
13264
2008 Salsco 40" shavings mills, 9' long box, 100 HP 3-phase electric upgraded to sit along
the side of the machine as opposed to the end, eliminating several belts, bearings, and
sheaves. Box feed powered by 15 HP 3-phase motor. Heads upgraded from original Salsco
heads to 40" wide x 10" diameter with 12 rows of knives and use regular 5/32" planer knives
with square head set screws. Excellent condition. A second shavings mill built exactly the
same also available. $65,000.00 each or $120,000.00 for both.
$65,000.00
Michigan
15739
Custom built shavings mill, built heavy duty, box handles logs 8' length x 36" diameter, 2
heads 4 blades each, 2-strand 30' log deck with stop & load, 10' elevator, knife sharpener,
currently hooked up with hydraulics to lineshaft but could change to diesel or electric power.
Produces around 2 to 2.5 tons or 50 cu. yards daily. Motivated seller and best offers
considered.
$45,000.00
Reduced
Missouri
16605
New
Custom Built Shavings Mill with 3 phase, 2 - 20 HP motors. Chain/belt driven. Box measures
29 1/2" X 54". Includes 5' X 24" conveyor belt, all electric/control boxes, and blower.
$20,000.00
New Mexico
16428
Sale of shavings/animal bedding business includes customer distribution directory, supplies,
suppliers and proprietary shaving/processing information, as well as: High Production
Shaving Mill, incl green deck, 100"x40" shaver box, Webb burner, Heil dryer, Rotex
$249,000.00
screener, Champion shredder, live-floor storage trailer, 4-stage Verville bagger, Hanchett 48"
knife sharpener, blowers, augers, conveyors. Video available.
North Carolina
15951
2008- 40'' Salsco Shaving Mill. 127 Hp Caterpillar engine, 960 hrs., 2 sets of knives, 9'
hopper, 32' electric conveyor, 8' electric conveyor, 6'x13' log bunk with air piston loader.
Great condition
Alabama
Kentucky
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$38,000.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 29
North Carolina
14684
Salsco 150' shavings dryer, 3 50' conveyors working in tandem, with mesh conveyor, 6' wide,
3 fans, 3 Blue Line propane heaters. Maybe 400 hours on the dryer. Includes shaker screen,
12" auger, and all electrical from the wall to the mill. Everything in excellent condition.
$150,000.00 comparable new.
North Carolina
14883
2010 Salsco 30" shavings mill, 90 HP Cat diesel engine with turbo, Only one year of running
time. Kept under cover. Includes conveyors without power.
$47,000.00
Ohio
16468
Jackson Lumber Harvester Shavings Mill. Model 13086-D30. Rebuilt in 1994. Detroit 80 HP
diesel engine. 2 heads with 4 knives each, 5' box. Hydraulics are on box and heads are belt
driven. Includes an extra detroit engine for parts and an extra radiator that has been rebuilt
and not used. Also includes extra blades and a 20' belt conveyor. Can demonstrate. Produces
approx 17 cubic yards per hour.
$35,000.00
Pennsylvania
16045
2011 Salsco 30" shavings mill with 91 HP Cat diesel engine. Hydraulic. Tandam axel,
Portable. Approximately 550 hours.
$45,000.00
Texas
16393
Jackson Lumber Harvester Shavings Mill: 2 - 4 knife cutter heads, 6" diameter. Box is 27" X
54". 2 - 15 HP motors on each cutter head. Has chain drive with electric motor drive.
$17,500.00
16395
Shavings Mill currently in operation. 2 - 30" wide knife cutter heads with 4 knives.
Converted from chain drive to hydraulic. Includes everything needed to operate a shavings
mill business: 21', 53', and 17' conveyors. 15' log deck. 2 40 HP motors and 5 HP motor for
hydraulics. Includes ROTARY DRYER that is 40" X 32', dust collector, eddiecurrent magnet.
The drier runs on wood or dust.
$62,000.00
Texas
16394
Shavings mill with hydraulic drive and 15 HP engine. 2 individual boxes that are 52" long.
Each box has 36" wide cutter head with 5 knives on each head. Each head has 30 HP motor.
Includes a second set of knives, hydraulic pump, hydraulic tank, and control boxes to power
the mill. Produces approx 30 yds/hr.
$27,500.00
Utah
13696
2008 custom built shavings mill, 54" long box 24" wide 24" deep, 25 HP 3-phase motor
drives a single 6" diameter 4-knive head. Knives are super easy to replace.
$19,000.00
Reduced
STATE
AD #
Shingle Mills
PRICE (U.S.)
British Columbia
13073
Jonsered 30" vertical shingle/resaw, 10HP, new rubber on balanced wheels, includes sliding
table and air sets.
$4,500.00
15363
1850's Sumner shingle mill with trim saw, all belt driven, needs some work but has plenty of
replacement parts. Includes sharpener, gummer, knee bolter saw for cleaning the blocks
before the shingle saw gets to it. Also includes new stellite headsaw and trim saw blades.
Powered by 466 International diesel engine. Serious offers considered.
$6,000.00
Reduced
Texas
British Columbia
Maine
Massachusetts
STATE
$70,000.00
1979 Desjardens shingle mill, wood frame, two 38" vertical solid tooth shingle saws with
13214
collars, 2 edging saws, buncher. Produces 38" or 1/2" shingles. No power, 35-40 HP power
Updated
requirement. Only produced 50 shingles.
$4,000.00
Reduced
1997 Desjardens RE-86X hydraulic driven shingle mill, hydraulic power with 112 HP Perkins
13325 diesel engine, 38" horizontal inserted tooth blade, steel frame, sawdust blower, trough
Updated outfeed conveyor. Low hours on everything. Always under cover. Excellent condition.
Produces up to 84 bundles daily with two operators.
$23,000.00
AD #
Skidders
PRICE (U.S.)
Pennsylvania
16016
Cable Skidder: 1997 Franklin Skidder, model 170, diesel with new tires and new engine
(500 hours), has a cable with a winch.
Tennessee
15982
450C Timberjack skidder, cab, grapple, winch
STATE
AD #
Slab Saws
PRICE (U.S.)
16051
Cornell Automatic Slab Saw. Has 20 HP on head saw and 3HP on hydraulics. Fair condition.
In operation.
$4,400.00
Michigan
$24,000.00
Reduced
$28,000.00
STATE
AD #
Slasher Saws
PRICE (U.S.)
Georgia
13450
CSI DL4400 slasher saw, includes new reversible deck. 59" saw bar, plumbed for hydraulics.
$9,500.00
Ontario
15477
Slasher saw with cab,seat and joystick controls, all hydraulic hose and fittings for 7
functions, 48" carbide insert tooth saw with swing mechanism, two log holddowns. No
power.
$5,000.00
STATE
AD #
Indiana
14221
STATE
AD #
Stacking Decks
2004 Pendu 4600E Board Stacker, variable speed feed, hydraulic power, stacks up to 4,000
boards per hour depending on the size of the material being stacked, handles from 1/4"
boards up to 6'x8" cants. Designed to stack material produced on gang saws and resaws.
Purchased new but never set up. Still just like new.
Table Saws
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$20,900.00
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Minnesota
15229
STATE
AD #
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 30
Yates table saw, bearings in excellent condition, 18" blade, fine-adjusting capability, 40"
wide ripping capacity, 5 HP 3-phase power, handles up to 5 1/2" material. 1500 lb. transport
weight.
$950.00
Tenoners
PRICE (U.S.)
California (North)
11351
Jenkins Model 90 double end tenoner, handles from 15" to 8' length, 3-phase power, most
electrical included.
Michigan
16455
Greenly tenoner with 5 heads on each side.
$11,000.00
Ohio
16598
New
Double End Trim Saw Tenoner Machine - Custom built. 11" blades. Cuts up to 82" length X 1
1/2" thick. Line shaft ready. Has capacity for electricity - 3 phase 480 V. with 2 motors.
$11,500.00
Ohio
15401
2004 Dyna SD60 Super Duty single end teneoner with Dyna drill press, produces spindles
from 3-1/2" to 6" diameter, drill press adjusts for angle drilling, lineshaft ready. Original
owner.
$10,000.00
Pennsylvania
Tenon Machine made by L-Power and Co, Philadelphia, AP. Also a Mortise machine made by
16523 Heath Machine in Montrose, PA. Both machines sold by Briggs machinery in Pittsburgh, PA.
Updated Both machines are heavy cast iron and rein fair shape. Outfit would work to make wooden
windows or panel doors.
$6,000.00
$1,800.00
STATE
AD #
Trailers
PRICE (U.S.)
California (North)
14133
Two 40' chip trailers, one with drop floor and spread axle, one with chip tailgate and sliding
rear axles
$2,000.00
Michigan
16378
Eby 16' Double Decker Trailer. 6' 8" wide X 7' 8" high. GVWR of 12500 lbs. 7000 lb axels.
Split gates indoors. Like new. Tall enough for Draft Horses.
$12,000.00
Missouri
15823
2002 Trailer with these specs: 29,5000 lb with 5,900 lb hitch load and load capacity 19,900
lb; Electrical - sealed modular wiring harness with LED lights; Frame - 12 in. pierced i-beam
with 3 in. crossmembers 16 in. on center; Tires - 235/80 R16 LRE (3097lb); 2 in treated
wood floors, adjustable pintle eye - coupler, heavy duty safety chains, 60 in X 24 in. heavy
duty flip up ramps with spring assist; deck length - 25 ft flat + 5 ft dovetail; all wheel
electric brakes, single 12,000 lb drop foot jack; 2 - 10000lb oil bath axles; toolbox - chain
box with lockable lid standard; slipper springs suspension; finish - primed, 2 coats of
automotive grade enamel
$6,000.00
South Carolina
16176
Trailer, 8' x 20' Dovetail 3 single axles with Pinal Hitch. Include scrag mill for $4200.
$2,100.00
STATE
AD #
Transfer Decks
PRICE (U.S.)
Kentucky
15227
20' 3-strand cant transfer deck with unscrambler, 5 HP 3-phase on the deck, 3- HP 3-phase
on the unscrambler.
Virginia
16255
10ft heavy duty 4 strand transfer deck with drive and 5 HP motor
STATE
AD #
Alabama
9870
20' double end trim, 1 stationary 20" saw, air adjustment on other 20" saw, 5 HP 3-phase
motors on each saw.
$3,000.00
British Columbia
13067
Twin 16" Hula saw system consisting of 24’ x 12" roll case with stops, length gauge, air
kickers, mac valves ,24’ x 16" drop conveyor belt, 6 strand 8’ x 20’ H78 camel back infeed
transfer deck, 7.5HP drive with radicon reducer, two 4’ x 8’ x 20" block bins. Easy to
breakdown and load.
$12,000.00
Louisiana
15241
Morgan 2-saw 20" trimmer, variable speed, 3-phase power.
$3,500.00
Maine
14202
20" trim saw, handles material 8" width and 3" depth, 3-phase power
$400.00
Reduced
Massachusetts
16369
CMC left hand automatic overhead trimmer 6'-16' with a waster belt conveyor and even
ending rolls. Great condition.
$4,000.00
11444 Browning double end trim, adjustable cut up to 48", 7.5" saws, live infeed belt, includes
Updated 3-phase motors on each saw and drive motor. No infeed or outfeed decks.
$1,100.00
Reduced
Mississippi
Trim Saws
$5,000.00
Reduced
$2,500.00
PRICE (U.S.)
North Carolina
11051
Falcon Machinery 24" drop multi trimsaw, allows for 6 saws 2 end trim and 4 bucking
locations in between, handles boards up to 20' length. 5 HP 3-phase on each saw. Includes
infeed and outfeed chain.
$12,500.00
Ohio
16597
New
Double End Trim Saw Tenoner Machine - Custom built. 11" blades. Cuts up to 82" length X 1
1/2" thick. Line shaft ready. Has capacity for electricity - 3 phase 480 V. with 2 motors.
$11,500.00
Pennsylvania
11237
1999 Newman multisaw drop trimmer, completely automated, currently sawing 6"x6" cants,
live infeed chain, live slab/sawdust chain, three-phase motor on each saw position. Operated
only for 4 years. Original owner.
$13,000.00
Pennsylvania
11639
Cornell automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.
$7,000.00
11640
Automatic adjustable 2-saw trimmer, similar to Cornell, 18" blades, 3-phase power with
hydraulic power packs.
$3,000.00
Pennsylvania
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
3/24/15
PAGE 31
Virginia
16256
Cornith 2 saw trimer
$4,000.00
Wisconsin
14069
Irvington 16' V-line drop-down trim saw, 8 saw units with individual levers, 14" saws, first
saw is adjustable, infeed table, outfeed waste conveyor, 3 HP 3-phase 440V on each saw,
separate infeed and outfeed motors. 7200 lbs. shipping weight. Always kept indoors.
$4,250.00
Reduced
STATE
AD #
Tennessee
Truck Scale
16571
80 ton Truck Scale. 60 feet long.
Updated
PRICE (U.S.)
$12,000.00
STATE
AD #
Georgia
15915
International Log Truck for off road use only. Has good 671 Detroit engine.
Trucks
$1,500.00
Georgia
15916
Cabover GMC with good 250 Cummins, 10 speed transmission
$1,500.00
Pennsylvania
11342
1974 Mack Interstater, 237 motor, 5-speed, 387 Mack rearends, motor completely rebuilt,
custom rolled and pleated interior, drive tires are all new recaps.
$3,000.00
STATE
AD #
Truss Manufacturing
Clary Craftmaster Model 310 component saw for truss manufacturing, Serial 310.090044.
Includes 4 blades (two 14", one 16", one 28") on separate arbors and three movement
motors, 35' track. All 3-phase. Appears 100% complete, even control box is present. Towing
requirement 20' bed or longer.
PRICE (U.S.)
PRICE (U.S.)
Oklahoma
8678
STATE
AD #
Alabama
13785
Mellott cant deck 10' wide x 16' long 1 HP 3-phase 240/480 V with Mellott lumber
unscrambler, 3 HP 3-phase 240/480 V, electrical runs through gear box.
$3,400.00
Kentucky
15828
Heavy duty unscrambler.
$3,500.00
Wisconsin
13839
Brewer 4-strand board unscrambler, 8' width, 5 HP with gear box and double reducer
$3,500.00
Reduced
STATE
AD #
Indiana
15911
STATE
AD #
Oregon
15209
Unscramblers
Vacuum Pump
2001 40 HP Quincy Vacuum Pump with control panel and cooling radiator with fan, 29,000
hours
Veneer Clippers
1996 Silver Eagle Model 72/602 veneer clipper, SN W69699, hardly been used, purchased
for cutting multiple layers of recycled paper and didn't work very well. Works very well for
veneer as intended. Footprint is 4' wide x 9' long x 106" tall. Includes resharpened 75" long
blade and spare blade, hand tie valves, new air hoses. Tested and ready to go.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$2,000.00
PRICE (U.S.)
PRICE (U.S.)
$4,000.00
PRICE (U.S.)
$3,250.00