1. home and garden
2. home improvement and repair
3. plumbing

Electronic Hand Washing Faucet
EAF-350 SERIES
 Description
Battery-Powered, Sensor-Activated, Electronic Hand Washing Faucet for pretempered or hot and cold water operation.
 Models
EAF-350
Single Supply Faucet (for pre-mixed water only)
EAF-350-ISMWith Integral Spout Temperature Mixer (For Hot and
Cold water supply connection)
 Flow Rates
1.5 gpm (5.6 Lpm) Aerator Spray Head
0.5 gpm (1.9 Lpm) Aerator Spray Head
 Specifications
Sensor-Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing
Faucet with the following features:
•Modular One-Piece Construction with all Serviceable Componenets above
deck
• Temperature Adjustable (with mixer)
• Double Infrared Sensor with Automatic Setting Feature and Microprocessor
•Magnetic Solenoid Valve
• Adjustable Hot Water Limit Set
• Water Supply Connection with Flexible High-Pressure Hose and Strainer
• 6V Lithium CR-P2 Commercial Battery included
• IR-Click feature
• Appropriate Mounting Hardware included
 Variations
ISM
Integral Spout Mixer
 Accessories
• Trim Plates
 ETF-312-ATrim Plate for 4” (102 mm) Centerset Sink
ETF-510-ATrim Plate for 8” (204 mm) Centerset Sink
Trim Plates must be specified and ordered separately
 Warranty
3 year (limited)
 Compliant to:
ASME A112.18.1-2011/CSA B125.1-11, NSF372, ICC/ANSI 117.1
EAF-350
EAF-350-ISM
The new Optima® EAF-350 faucet
— Bringing intelligence to water
Sloan’s new EAF-350 series electronic hand washing faucets operate by means
of a dual infrared sensor and microprocessor based logic. The modular design
incorporates all the operating components of the faucet, including the sensor,
solenoid, circuitry and battery above the sink deck within a die-cast metal spout.
ISM models feature an integral temperature control lever which allows the user
to adjust the water temperature. This adjustment can also be converted to a fixed
setting. EAF faucets ordered without the ISM variation must be connected to a
single, pre-tempered water supply.
The IR-click feature allows the user to place the faucet into optional function
modes, including “continuous run” and “temporary off” simply by activating the
IR LED on the sensor window. The use of the IR-click feature is recommended for
installations where users have a regular familiarity with the faucet (i.e. executive
and non-public restrooms).
The Optima EAF-350 series faucets include a 6 VDC lithium battery. Battery life
is approximately three (3) years.
This space for Architect/Engineer approval
Job Name
Model Specified
Date
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
EAF-350 Series 03-15
EAF-350 SERIES
Description
Battery-Powered, Sensor-Activated, Electronic Hand Washing Faucet for pretempered or hot and cold water operation.
Flow Rates
1.5 gpm (5.6 Lpm) Aerator Spray Head
0.5 gpm (1.9 Lpm) Aerator Spray Head
IR-Click Feature
The IR-Click is a detector located in the sensor window of the faucet spout that
allows the user to place the faucet into the following function modes: Continuous
Run, Temporary Off and Auto Backround Adjustment.
Because the use of the IR-click feature requires familiarity with the faucet, this
feature is not recommended for faucets intended for use by the general public.
The IR-Click is ideal for use in hospital rooms, executive restrooms and other
locations where the primary user has regular contact with the product.
Electrical Specifications
Control Circuit
6 VDC - includes Auto Set Range
Adjustment and Low Battery Indicator
LED
Timeout Setting
2 mins - Maximum time faucet will run
upon continuous moving detection
Function
Sensor Range
Nominal: 4” - 6” (100-150 mm)
Adjustable by IR-Click:
2-1/2” - 7-1/2” (60-200 mm)
Press Button
LED Signal
Temporary OFF
(2 min)
1. 1 time for 2 seconds
2. 2 times (double push)
1. LED Green (1)
2. LED Red pulsating
flashes
reset:
1 time or will reset
automatically after 2 mins
Continuous Run
1. 1 time for 2 seconds
2 minute default setup
2. 1 time for 3-5 seconds
(adjustable from 1-20 mins)
Power Supply
6 VDC Lithium CR-P2 battery
Approximate 3 year life
Front View
reset:
1 time or will reset
automatically after 2 mins
Auto Backround
Adjustment
1. 1 time for 2 seconds
2. 2 times (double push)
3. 1 time for 5 seconds
then hold till requested
range is reached
4. Release
Side View
5-5/8” Operation
143 mm As the user’s hands enter the beam’s
2-1/3”
effective range, the beam is reflected
back into the sensor receiver and5-5/32”
131 mm
activates the solenoid valve allowing
water to flow from the faucet. Water
Max.
will flow until the hands are removed
or until the faucet reaches its 1-49/64”
Ø 2-1/8”
automatic timeout limit setting. 45 mm
54 mm
4-3/64”
103 mm
1. LED Green (1)
2. Water flows after
releasing
1. LED Green (1)
2. LED Red blinks
3. LED Red (1-8)
4. LED Green (1)
4-3/64”
Ø 1-5/16”
103 mm
33.5 mm
54 mm
Rough-In
4-3/64”
103 mm
13-49/64”
EAF-350
Side
View
350
mm
Front ViewEAF-350-ISM
1.5 gpm (5.6 Lpm) Max. Flow or
5-5/8”
9/16”
0.5 gpm (1.9 Lpm) Max.
Flow
143 mm UNEF
Faucets with Single Line Water
Supply
5-5/32”
131 mm
Spout
O-ring
Side View
1.5 gpm (5.6 Lpm) Max. Flow or
2-1/3”
0.5 gpm (1.9 Lpm) Max.
Flow
54 mm
Faucets with Hot/Cold Water
Supply
5-5/32”
4-3/64”
131 mm
103 mm
Mixing Lever
4-3/64”
(Can be set and
removed)
103 mm
Spout Max.
Ø 1-5/16”
33.5 mm
Ø 1-5/16”
Required
Side View1-49/64” Min. Hole33.5
mm
O-ring 45 mm
5-5/8”
Side View
Ø 1-5/16” 33.5 mm
Min. Hole Required
Ø 2-1/8”
54 mm
143 mm
45 mm
Max. Deck
4-3/64”
Thickness
103 mm
103 mm
Tempered
Supply
13” 330 mm
Long Flex Hose
Front View
Front View
5-5/8” 1-49/64”
5-5/32”
Gasket
13-49/64”
143 mm 45 mm
131
mm
4-3/64”
350
mm
Retainer
Max. Deck
5-5/32”
Nut 103 mm
131 mm 4-3/64”
9/16”
Thickness
1-49/64”
Gasket
Retainer
Nut
Hot
Supply
Spout
If a connection to separate hot
and cold water supplies is desired,
then a Bak-Chek® tee fitting (not
supplied) must be used prior to O-ring
connecting to the faucet.
Sloan • 10500
Seymour
Gasket
2 ⅛”
(54 mm)
UNEF
5-5/32”
131 mm
4-3/64”
103 mm
2-1/3”
54 mm
Side Vie
Side Vie
2-1/3”
54 mm
5-5/32”
131 mm
Max.
Ø 1-5/16”
1-49/64”
33.5 mm
45 mm
Max.
Mixing Lever Ø 1-5/16”
1-49/64”
(Can be set and
Ø 2-1/8”
13” 330 mm Cold
54 mm
Supply
Long Flex
33.5 mm
Ø 2-1/8”
45 removed)
mm
Hoses
54 mm Spout
Ø 1-5/16” 33.5 mm
Ø 1-5/16” 33.5 mm
13-49/64”
Min. Hole Required
Min. Hole Required
350 mm
O-ring
13-49/64”
4-3/64”
9/16”
350 mm
103 mm
Avenue 1-49/64”
•4-3/64”
Franklin
mm
45103
mm
Park,
IL 60131
Gasket
UNEF
9/16”
1-49/64”
UNEF
45 mm
Retainer
Retainer • F: 847-671-4380 / 800-447-8329
Ph: 847-671-4300 / 800-9-VALVE-9
• www.sloanvalve.com
Copyright © 2015 Sloan Valve Company
Max. Deck
Thickness
Nut
Tempered
13” 330 mm
Nut
Spout
Spout
Hot
Max. Deck
Optima EAF-350
Series 03-15
Thickness
Ø 1-5/16” 33.5 mm
Min. Hole Required
Cold
Spout
Spout