Product datasheet LSS100100 Characteristics homeLYnk logic controller Main Product name HomeLYnk Product or component type Logic controller Communication port protocol BACnet Modbus IP (Internet Protocol) KNX [Us] rated supply voltage 24 V DC Power consumption 2W Local signalling Green LED (CPU load) Green/red LED (KNX powered/reset) Physical interface 1 x RJ45 1 x RS485 1 x RS232 1 x TP-UART2 Port Ethernet 10BASE-T/100BASE-TX Integrated connection type 1 x USB 2.0 port Control type RESET push-button Connections - terminals KNX bus : bus terminal, 2 x 0.8 mm² Power supply : clamp terminal, 1.5 mm² Serial : clamp terminal, 1.5 mm² Mounting support DIN rail Height 90 mm Width 52 mm Depth 58 mm The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Complementary Environment Ambient air temperature for operation -5...45 °C Operating altitude <= 2000 m Relative humidity <= 93 % IP degree of protection IP20 Directives 2002/96/EC - WEEE directive Standards IEC 60950-1 Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 1426 - Schneider Electric declaration of conformity REACh Reference contains SVHC above the threshold Product environmental profile Available Product end of life instructions Available 1/2 2/2