Download Report

10MQ060NPbF
Vishay High Power Products
Schottky Rectifier, 2.1 A
FEATURES
• Small foot print, surface mountable
Available
• Low forward voltage drop
RoHS*
• High frequency operation
Cathode
Anode
COMPLIANT
• Guard ring for enhanced ruggedness and long term
reliability
SMA
• Lead (Pb)-free (“PbF” suffix)
• Designed and qualified for industrial level
DESCRIPTION
The 10MQ060NPbF surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and very small foot prints on PC boards. Typical applications
are in disk drives, switching power supplies, converters,
freewheeling diodes, battery charging, and reverse battery
protection.
PRODUCT SUMMARY
IF(AV)
2.1 A
VR
60 V
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
DC
VRRM
IFSM
tp = 5 µs sine
VF
1.5 Apk, TJ = 125 °C
TJ
Range
VALUES
UNITS
2.1
A
60
V
40
A
0.63
V
- 55 to 150
°C
10MQ060NPbF
UNITS
60
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average forward current
See fig. 4
IF(AV)
Maximum peak one cycle
non-repetitive surge current
See fig. 6
IFSM
Non-repetitive avalanche energy
EAS
Repetitive avalanche current
IAR
TEST CONDITIONS
50 % duty cycle at TL = 120 °C, rectangular waveform
On PC board 9 mm2 island
(0.013 mm thick copper pad area)
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated
load condition and with
rated VRRM applied
TJ = 25 °C, IAS = 1 A, L = 4 mH
VALUES
UNITS
1.5
A
40
A
10
2.0
mJ
1.0
A
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94118
Revision: 16-Apr-08
For technical questions, contact: [email protected]
www.vishay.com
1
10MQ060NPbF
Vishay High Power Products Schottky Rectifier, 2.1 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
1A
Maximum forward voltage drop
See fig. 1
VFM (1)
TJ = 25 °C
1.5 A
1A
TJ = 125 °C
1.5 A
Maximum reverse leakage current
See fig. 2
IRM (1)
Threshold voltage
VF(TO)
Forward slope resistance
Typical junction capacitance
Typical series inductance
Maximum voltage rate of change
rt
CT
LS
dV/dt
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
TJ = TJ maximum
VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz
Measured lead to lead 5 mm from package body
Rated VR
VALUES
UNITS
0.63
0.71
V
0.57
0.63
0.5
mA
7.5
0.45
V
86.8
mΩ
31
pF
2.0
nH
10 000
V/µs
VALUES
UNITS
- 55 to 150
°C
80
°C/W
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TJ (1), TStg
Maximum thermal resistance,
junction to ambient
RthJA
TEST CONDITIONS
DC operation
Approximate weight
Marking device
Case style SMA (similar D-64)
0.07
g
0.002
oz.
V1H
Note
(1)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 94118
Revision: 16-Apr-08
10MQ060NPbF
Schottky Rectifier, 2.1 A
1
0.1
0.2
IR - Reverse Current (mA)
Allowable Case Temperature (°C)
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
150
140
DC
130
120
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
110
100
90
Square wave (D = 0.50)
80 % rated VR applied
80
See note (1)
70
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
0.4
0.8
1.2
1.6
2.0
2.4
VFM - Forward Voltage Drop (V)
IF(AV) - Average Forward Current (A)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
100
1.4
10
1.2
Average Power Loss (W)
IF - Instantaneous Forward
Current (A)
10
Vishay High Power Products
TJ = 150 °C
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 75 °C
0.01
TJ = 50 °C
0.001
TJ = 25 °C
0.0001
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
1.0
RMS limit
0.8
DC
0.6
0.4
0.2
0
10
20
30
40
50
60
0.4
0.8
1.2
1.6
2.0
2.4
IF(AV) - Average Forward Current (A)
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
CT - Junction Capacitance (pF)
100
TJ = 25 °C
10
0
0
VR - Reverse Voltage (V)
20
10
30
40
50
60
IFSM - Non-Repetitive Surge Current (A)
0
100
10
At any rated load condition and
with rated VRRM applied
following surge
1
10
100
1000
10 000
VR - Reverse Voltage (V)
tp - Square Wave Pulse Duration (µs)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 6 - Maximum Peak Surge Forward Current vs.
Pulse Duration
Note
Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
(1)
Document Number: 94118
Revision: 16-Apr-08
For technical questions, contact: [email protected]
www.vishay.com
3
10MQ060NPbF
Vishay High Power Products Schottky Rectifier, 2.1 A
ORDERING INFORMATION TABLE
Device code
10
M
Q
060
N
TR
PbF
1
2
3
4
5
6
7
1
-
Current rating
2
-
M = SMA
3
-
Q = Schottky “Q” series
4
-
Voltage rating (060 = 60 V)
5
-
N = New SMA
6
-
None = Box (1000 pieces)
TR = Tape and reel (7500 pieces)
7
-
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95018
Part marking information
http://www.vishay.com/doc?95029
Packaging information
http://www.vishay.com/doc?95034
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94118
Revision: 16-Apr-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1