1. No category

Albertslund Ceiling
PRODUCT SPECIFICATION
ALB-C-1-26W-CF-W-O-RING
Product description
Weblink: 131
Design: Jens Møller-Jensen
Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal
ring reflects the light downwards, but its position also allows some light to slip past and illuminate
the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as
clear or white opal glass, depending on the desired light source.
Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated.
Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless
steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized,
extruded steel. Housing: Die cast aluminum.
Mounting: Surface: Mounted directly over a recessed 4” octagonal junction box.
Weight: Max. 6 lbs.
Label: cULus, Wet location. IBEW.
Product code
Light source
Voltage
Finish
Shade
ALB-C
1/26W/CF GX24q-3
1/100W/A-19/CL medium
120-277V
120V
BR ST STEEL
GALV
WHT
WITH SATURN RING
WITHOUT SATURN RING
a. CF variant provided with one 120-277V integral electronic ballast.
b. CF variant provided with an opal glass lamp diffuser.
c. Incandescent variant provided with clear glass lamp diffuser.
d. Incandescent variant only available in 120V.
I. Stainless steel versions are only for indoor use.
II. The comparable EU version has the following classification: Ingress Protection Code: IP44.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Albertslund Ceiling
ALB-C-1-26W-CF-W-O-RING
PRODUCT SPECIFICATION
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Albertslund Ceiling
ALB-C-1-26W-CF-W-O-RING
PRODUCT SPECIFICATION
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3
Albertslund Ceiling
9.5”
Design Jens Møller-Jensen
44207-I1
9.5”
10.6”
5.4”
Light source
Voltage
Weight
Electric shock protection
Ingress protection
1/26W/CF GX24q-3
1/100W/A-19/CL Medium
120-277V
120V
6.0 Lbs
Cl. II, Wet location
IP 44, Grounded
Recommended cleaning substances:
Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122° F/ 50° C) with a mild detergent.
Warning: Scouring powder and similar substances will scratch surfaces.
All installation is subject to local code and jurisdiction. Consult a qualified electrician
to ensure correct branch circuit conductor. The installer must ensure that the ceiling
can support the luminiare’s weight. The installer must if necessary reinforce the ceiling
structure by adequate means.
Louis Poulsen Lighting · 3260 Meridian Parkway · Fort Lauderdale, Florida · 33331 954-349-2525 · www.louispoulsen.com
44207-I1
1
CONNECT WIRES TO
JUNCTION BOX IN CEILING
4.3"
2.45"
x3
3
- Green to Green (ground)
- White to White
- Black to Black
4.3"
2
1
2
3
NOTE: FOR WET LOCATION, THE INSTALLER
MUST PROVIDE A BEAD OD SILICONE
AROUND THE JUNCTION BOX
4” Octagonal
junction box
4
Rawplugs
Screws
Expansion bolts
(Not provided)
The installer must ensure to use proper means
(rawplugs/screws/expansion bolts) to secure the
The installer must if necessary reinforce the ceiling
structure by adequate means
Use only light source
in accordance to the
lamp replacement
label on the luminaire
Mount the luminire junction box to
the ceiling, over a 4” junction box or
directly to the junctionbox
(remove knockouts)
Albertslund Ceiling
Design
Jens Møller-Jensen
Concept
The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip
past and illuminate the ceiling. The anti-glare ring prevents horizontal glare. The diffuser is clear or white opal glass, depending on the desired light source.
Finish
Galvanized. Stainless steel, brushed and lacquered. White, powder coated.
Material
Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or die cut galvanized steel. Anti-glare ring: Spun aluminum, spun
stainless steel or extruded galvanized steel. Housing: Die cast aluminum.
Mounting
Surface: Mounted directly over a recessed 4” octagonal junction box.
Weight
Max. 6 lbs.
Label
cULus, Wet location. IBEW.
Product Code
Light source
Voltage
Finish
Diff./Encl./Glass
Shade
ALB-C
1/100W/A-19/CL medium
120-277V
BR ST STEEL
CLEAR
WITH SATURN RING
1/26W/CF GX24q-3
120V
GALV
OPAL PAINTED
WITHOUT SATURN RING
WHT
Specification notes
Info notes
a. CF variant provided with one 120-277V integral electronic ballast.
b. CF variant provided with an opal glass lamp diffuser.
c. Incandescent variant provided with clear glass lamp diffuser.
d. Incandescent variant only available in 120V.
I. Stainless steel versions are only for indoor use.
II. The comparable EU version has the following classification: Ingress Protection Code: IP44.
Albertslund Ceiling
PRODUCT SPECIFICATION
ALB-C-1-100W-INC-W-RING
Product description
Weblink: 131
Design: Jens Møller-Jensen
Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal
ring reflects the light downwards, but its position also allows some light to slip past and illuminate
the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as
clear or white opal glass, depending on the desired light source.
Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated.
Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless
steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized,
extruded steel. Housing: Die cast aluminum.
Mounting: Surface: Mounted directly over a recessed 4” octagonal junction box.
Weight: Max. 6 lbs.
Label: cULus, Wet location. IBEW.
Product code
Light source
Voltage
Finish
Shade
ALB-C
1/26W/CF GX24q-3
1/100W/A-19/CL medium
120-277V
120V
BR ST STEEL
GALV
WHT
WITH SATURN RING
WITHOUT SATURN RING
a. CF variant provided with one 120-277V integral electronic ballast.
b. CF variant provided with an opal glass lamp diffuser.
c. Incandescent variant provided with clear glass lamp diffuser.
d. Incandescent variant only available in 120V.
I. Stainless steel versions are only for indoor use.
II. The comparable EU version has the following classification: Ingress Protection Code: IP44.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Albertslund Ceiling
ALB-C-1-100W-INC-W-RING
PRODUCT SPECIFICATION
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Albertslund Ceiling
ALB-C-1-100W-INC-W-RING
PRODUCT SPECIFICATION
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3
Albertslund Ceiling
PRODUCT SPECIFICATION
ALB-C-1-100W-INC-W-O-RING
Product description
Weblink: 131
Design: Jens Møller-Jensen
Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal
ring reflects the light downwards, but its position also allows some light to slip past and illuminate
the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as
clear or white opal glass, depending on the desired light source.
Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated.
Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless
steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized,
extruded steel. Housing: Die cast aluminum.
Mounting: Surface: Mounted directly over a recessed 4” octagonal junction box.
Weight: Max. 6 lbs.
Label: cULus, Wet location. IBEW.
Product code
Light source
Voltage
Finish
Shade
ALB-C
1/26W/CF GX24q-3
1/100W/A-19/CL medium
120-277V
120V
BR ST STEEL
GALV
WHT
WITH SATURN RING
WITHOUT SATURN RING
a. CF variant provided with one 120-277V integral electronic ballast.
b. CF variant provided with an opal glass lamp diffuser.
c. Incandescent variant provided with clear glass lamp diffuser.
d. Incandescent variant only available in 120V.
I. Stainless steel versions are only for indoor use.
II. The comparable EU version has the following classification: Ingress Protection Code: IP44.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Albertslund Ceiling
ALB-C-1-100W-INC-W-O-RING
PRODUCT SPECIFICATION
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Albertslund Ceiling
ALB-C-1-100W-INC-W-O-RING
PRODUCT SPECIFICATION
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3
Albertslund Ceiling
PRODUCT SPECIFICATION
ALB-C-1-26W-CF-W-RING
Product description
Weblink: 131
Design: Jens Møller-Jensen
Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal
ring reflects the light downwards, but its position also allows some light to slip past and illuminate
the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as
clear or white opal glass, depending on the desired light source.
Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated.
Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless
steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized,
extruded steel. Housing: Die cast aluminum.
Mounting: Surface: Mounted directly over a recessed 4” octagonal junction box.
Weight: Max. 6 lbs.
Label: cULus, Wet location. IBEW.
Product code
Light source
Voltage
Finish
Shade
ALB-C
1/26W/CF GX24q-3
1/100W/A-19/CL medium
120-277V
120V
BR ST STEEL
GALV
WHT
WITH SATURN RING
WITHOUT SATURN RING
a. CF variant provided with one 120-277V integral electronic ballast.
b. CF variant provided with an opal glass lamp diffuser.
c. Incandescent variant provided with clear glass lamp diffuser.
d. Incandescent variant only available in 120V.
I. Stainless steel versions are only for indoor use.
II. The comparable EU version has the following classification: Ingress Protection Code: IP44.
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
1/3
Albertslund Ceiling
ALB-C-1-26W-CF-W-RING
PRODUCT SPECIFICATION
Material description
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
2/3
Albertslund Ceiling
ALB-C-1-26W-CF-W-RING
PRODUCT SPECIFICATION
Light measurements
Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com
3/3