AGS EN
MOUNTED SPRAYERS AGS EN (200 – 1200 liters; 6 – 18 m)
QUALITY SPRAYING SAVES MONEY!
EASY TO USE
ECONOMICAL
FRIENDLY TO ENVIRONMENT
Family of mounted sprayers AGS EN was
developed for most demanding, professional users. Sprayers AGS EN are known
for its quality manufacturing, long life
span, easy maintenance, progressive technological solutions and excellent price to
quality ratio. Quality of Agromehanika
sprayers is known among numerous users
all over the world.
ADAPTION TO CUSTOMER DEMANDS
www.agromehanika.si
MOUNTED SPRAYERS AGS EN (200 – 1200 liters; 6 – 18 m)
Tanks filling and spray
agents preparation
Front tank
Agromehanika (700 l)
Filling
Sprayers AGS EN can be filled in 3 ways, trough:
• Tank filler hole;
• Coupling for external filling enables easy and fast
filing of all tanks, without need to climb the sprayer.
It is protected with anti-return valve, which prevents
liquid from the tank to spill and polut the environment.
• Filling is also possible with use of suction system
with additional filter, which is immersed into
the river or pond.
Front tank
Front tank with 700 l capacity works in combination with
carried sprayer tank and has possibility of easy maneuvering and reduces filling frequency. It is coupled to the front
hydraulic outlets and lifting system. By pumping water
from sources like rivers or lakes, tanks of the sprayer can
be filled and emptied with speed of up to 570 l/min. It also
provides additional system of main (rear) tank filling.
Induction bowl
Serves for efficient preparation and mixing of chemicals with water. With help of Venturi
principle the spraying agent is quickly induced into main tank. Advantages of induction
tank are especially obvious when using powder agents. It also ensures additional safety
when dealing with dangerous chemical agents. Cleaning of induction bowl is enabled by
rotating nozzle.
Canister rinsing
Inside the induction bowl or inside main tank strainer there is a rotation nozzle that enables cleaning of spray agent canisters.
Induction bowl
Rotation nozzles for rinsing
Active agitation
It prevents sedimentation of powder substances. Agitation is assured by injection nozzle,
placed inside the main tank. Agitation works independently from spraying process.
Injection nozzle for agitation
Spraying booms
Agromehanika
MY H - 15, 16, 18 m
Are made in conformity with following principles: functionality, durability, compact dimensions. Ends of booms
are equipped with protective witdraw-returm mechanism.
Vital mechanical parts and hydraulics are made from quality materials, all booms are protected with eco-friendly
anti-corosion technology.
Hydraulic booms MY H - 15, 16, 18 m
Equipped with pneumatic suspension of vertical shocks
and spring suspension in other directions. Remote hydraulic opening, lifting, block and leveling offer maximum comfort to the user. One-point mounting system ensures excellent terrain copying. When folded, automatic hydraulic
block is applied to prevent movement of the booms.
Hydraulic boom 12 m MY H
Mounting is of trapezes type and ensures terrain copying.
Remote hydraulic opening, lifting, and leveling offer maximum comfort to the user. When folded, automatic block is
applied to prevent movement of the booms.
12 m MY / 12 m MY H
Hydraulic boom 12m MY
Mounting is of trapezes type and ensures terrain copying. As option user can decide for
hydraulic lifting and leveling of the boom. When folded, automatic block is applied to prevent damages to the booms.
Manual booms MRX - 10, 12, 15 m
Equipped with spring suspension system. Light but robust frame is mounted on trapezes,
which offers terrain copying. User can also decide for hydraulic lifting and leveling.
Rigid manual booms - 6, 8, 10, 12 m
Made for sprayers with tanks 200, 300 and 400 liters. Mounting to the sprayer is fixed. They
offer extremely light frame and best price to quality ratio.
MRX - 10, 12, 15 m
Rigid manual booms - 6, 8, 10, 12 m
Spraying
For spraying regulation one of the following types of regulators can be chosen:
• mechanic with constant pressure regulation,
• electric remote control and
• spray computer AG TRONIK, which can be connected with
GPS navigation
Spray computer AG TRONIK
Based on desired hectare consumption and with installed flow and speed
sensors it regulates the flow, needed for precision spraying. In case one of
the sections is closed, the flow is instantly adjusted by AG TRONIK. System
is very user friendly, operated via simple graphic interface. AG TRONIK also
offers work analysis and history saving. Information is stored on SD card and
can be easily transferred to personal computer.
GPS navigation
GPS navigation
Connected to AG TRONIK it enables automatic closing of main valve or independent section, when
we cross already treated surface. In comparison with classic marker it can be used also during the
night. GPS navigation makes spraying easier, more precise and faster. Has a possibility of history
saving and data analysis. Combination of AG TRONIK and GPS is especially useful for contractors.
Marker
Classic foam markers are used to signal previously treated surfaces to the user, by leaving foam
trail. It can be regulated regarding foam boll size (10-20 cm) and distribution frequency (5-20 s).
Cleaning of the system
Main tank cleaning
Main tank cleaning
Inside the main tank rotating nozzles are installed for cleaning of inner walls.
Complete cleaning of vital parts
Using the water from additional tank user can thoroughly clean inner parts
of regulator, pump, hoses and nozzles. Rotating nozzles also clean the inside of the main tank.
Partial cleaning of vital parts
Using the water from additional tank user can thoroughly clean inner parts
of regulator, pump, hoses and nozzles, while the main tank is still filled with
spraying agent. The content of main tank stays intact and can be used later. It is used to prevent blockages and corrosion of vital parts and extends
lifespan of the system.
Mounted sprayers
AGS 200-400 EN
Sprayers AGS EN with tank capacity of 200, 300 and 400 liters are made for
treatment of smaller agricultural surfaces, parks, golf and football courses,
etc. They are supplied with rigid type booms of 6, 8, 10 or 12 m and have
possibility of height adjustment. They are equipped with reliable Agromehanika BM pumps of 65 l/min or 105 l/min, with 3 year warranty and mechanical pressure regulators Agromehanika. They offer advantages of AGS
EN series also to smaller users.
AGS EN - 200, 300, 400 l
MOUNTED SPRAYERS AGS EN (200 – 1200 liters; 6 – 18 m)
Sprayer equipment
AGS 1200 EN
boom 18 MY H
Frame
Robust frame is made with latest knowledge of design and
manufacturing. Dust painting technology provides good
anti-corrosion protection of steel parts.
Tanks
All tanks are made from quality polyethylene. Main tank
sizes are 200, 300, 400, 600, 800, 1000 and 1200 liters. Bottom of the tank is designed to provide complete emptying. Two supplementary tanks are mounted for system
and hands washing.
Pump Agromehanika BM 150
Pump
Low pressure, piston-membrane type Agromehanika BM pumps can be supplied in 65,
105 or 150 l/min flow version. They are recognized for their reliability and quality manufacturing, what is assured by 3 year warranty.
Pressure regulator
Users can choose between hand regulator with constant pressure regulation on sections
or electronically controlled flow regulator with possibility of spray computer. All regulators
have self-cleaning pressure filter installed.
Pressure regulator Agromehanika PR 3 BF
Spray computer AG TRONIK
Operator station
It is positioned close to the induction bowl on the left side of the machine. All controls the
user needs to control the sprayer ancillary systems are conveniently gathered in one place.
Operator station
www.agromehanika.si
AGS EN sprayers are result of over 40 years of experience and knowledge of Agromehanika. Products meet most demanding European ecology standards and follow modern trends of design and development. Use of modern production techniques and quality
systems is a fundament for hi-reputation of Agromehanika products all over the world. Key technological processes are concluded
in-house or in cooperation with carefully selected partners from inside the EU.
CNC lathe machine
Laser cutting machine
Further quality insurance is provided by certification
from respected German institute JKI.
Sprayer Type
Powder coating line
Sprayers Agromehanika are provided solely with nozzles
made by respected German manufacturer Lechler.
AGS 200 EN
AGS 300 EN
AGS 400 EN
AGS 600 EN
AGS 800 EN
AGS 1000 EN
AGS 1200 EN
200
300
400
600
800
1.000
1.200
Tanks
Rated volume (l)
Rinsing tank (l)
Hand-wash tank (l)
20
40
50
60
100
100
128
12,5
12,5
12,5
15
13,7
13,7
13,7
•
•
•
Use of front tank (700 l)
Booms
Rigid manual (6, 8, 10, 12 m)
•
•
MRX (10, 12, 15 m)
MY (12, 15, 16, 18 m)
•
•
•
•
•
•
•
•
•
•
•
15 MY H
•
•
16 MY H
•
•
18 MY H
•
•
105 - 150
105 - 150
12 MY/12 MY H
Pumps
Type
Piston-membrane pump BM Agromehanika (3-year waranty)
Flow (l/min)
65
65
65 - 105
Max. pressure
105 - 150
105 - 150
20 bar by 540 rpm
Pressure regulators
Type
PR 3 Agromehanika – with selfcleaning pressure filter
Version
mechanic with CPR
Nozzles
mechanic with CPR, electronic remote, spray computer
Lechler (plastic, ceramic, triget)
Tractor coupling category
I.
I. / II.
II.
Distributor:
AGROMEHANIKA KRANJ D.D., Hrastje 52A, 4000 Kranj, Slovenia, EU; T: +386 4 2371 300; F: +386 4 2371 303 E: [email protected]