FlightGear™ Ka/Ku Universal Installation INTRODUCTION KEY FEATURES Carlisle Interconnect Technologies, in a partnership with St. Gobain Performance Plastics, now offers a complete ARINC 791 solution for Ka- and Ku-band SATCOM installations. The complete package contains everything required for either retrofit or forward fit installations on large jet aircraft. Installation fittings are adjustable to cover the complete range of aircraft frame spacing while providing discrete interface loads to the fuselage. The aerodynamic fairing follows the fuselage curvature without requiring a large installation doubler, sealants, or fasteners through the fuesalge. This design creates a simplified, standardized installation, easier maintenance inspections, and overall lower cost of ownership. Conformance to the ARINC 791 standard also helps future-proof the installation and makes upgrades to next generation antennas and SATCOM system equipment easier and faster with commonality across entire fleets. Designed to support a wide range of SATCOM systems from leading manufacturers and preferred by aircraft manufacturers for line fit installations, improve your speedto-market with CarlisleIT's FlightGear™ Ka/Ku Universal Installation. » Ka/Ku Multiband Radome » Durable light weight aluminum universal adapter plate » Supports a wide range of aircraft frame spacing » Supports a wide range of available antennas » Includes provisions for additional equipment under the radome, if required » Aerodynamic fairing conforms to aircraft fuselage without fasteners or sealants » Supports swept antenna volume up to 37.50” diameter x 9.60” tall » Easy upgrade path for future proofing » Easy recurring maintenance and inspection access » Easy de-modification for end-of-lease restoration APPLICATIONS » ARINC 791 » Ka- or Ku-Band SATCOM » CFR Title 14 Part 25 Carlisle Interconnect Technologies / 5300 W. Franklin Drive, Franklin, WI 53132 Toll Free - 800.327.9473 / Fax - 414.421.5301 / www.CarlisleIT.com ARINC 791 Solution_4.1.15.indd 1 4/1/2015 2:03:43 PM Capabilities INSTALLATION KITS TURNKEY PACKAGES Installation kits include the following standard parts: » » » » » » Ka/Ku Multiband Radome Universal adapter plate Aerodynamic fairing to match fuselage radius External fittings for adapter plate mounting Internal intercostal structures for adapter plate mounting Integrated antenna foundation based on customer antenna selection Carlisle Interconnect Technologies can also provide turnkey packages, including: » Fuselage penetrations for cables or wave guides » Harnesses and RF cables for SATCOM system installation » Interior installation structures including racks and avionics trays » System integration design » Certification via FAA or EASA » Recurring shipment approvals on FAA Form 8130-3 or EASA Form 1 » Direct mounting options TECHNICAL DATA » » » » » » » » » 3D models Outline and interface drawings Decompression analysis Bird strike test report Lightning test report Recommended installation engineering Detailed structural substantiation Detailed kit list Structural repair manual supplement 37.50 9.60 Carlisle Interconnect Technologies / 5300 W. Franklin Drive, Franklin, WI 53132 Toll Free - 800.327.9473 / Fax - 414.421.5301 / www.CarlisleIT.com Rev. 030415-POD © Carlisle Interconnect Technologies, 2015. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved. ARINC 791 Solution_4.1.15.indd 2 4/1/2015 2:03:46 PM
© Copyright 2024