1. No category

Exhibit. Participate. www.uavworld.aero
UAV World 2015
New horizons for new business
November 3 – 5, 2015
Munich, Germany
Air Display
Exhibition
Symposium
UAV World 2015
The right space for business,
opportunities and success
Expected for
AIRTEC 2015
15,000
UAV World 2015 – as part of 10th AIRTEC 2015 – provides an international
meeting place for the UAS community, covering both, the civil and the military
market to exchange the latest information on UAS technologies and missions.
Well respected experts from the industry, academia and governmental institutions
come here together to meet and discuss.
Inauguration
Keynote
The 10th AIRTEC 2015 will be inaugurated on November 3rd by Ilse Aigner,
Bavarian State Minister of Economic
Affairs and Media, Energy and
Technology, Deputy Minister-President
of Bavaria.
The opening keynote will be held by
Dr. Wolfgang Scheremet, Head of
Department Industry Policy, Federal
Ministry for Economic Affairs and
Energy.
B2B Meetings
600
The structure for success
Exhibitors
900
B2B Meetings
Exhibition
Congress
Participants
230
Congress
New Venue: Munich
Lecturers
Ideal Partner
Media Partner
Sponsors
UAV World has followed Bavaria’s call
and is now held at the Exhibition Center Munich. The dates remain the same,
November 3 – 5, 2015. This move has
given another boost to that high
dynamic and growing international
business and technology event. Munich
has an excellent reputation, particularly
oversees and is conveniently accessible
from anywhere around the world.
Highlights
Trends and developments in
unmanned aviation
KEYNOTES
German Airforce
Brigadier General Jörg Lebert, Germany
NATO Joint Air Power Competence Centre
Major Andre Haider, Germany
University of Victoria
Afzal Suleman, Canada
A flight programme
is planned (indoor /
outdoor area)
General Atomics Aeronautical Systems, Inc.
Rear Admiral US Navy (ret) Christopher C. Ames, USA
SPECIAL SESSIONS /
WORKSHOPS
Panel Discussion UAV / RPAS*
chaired by Volker Thomalla, Editor-in-Chief, magazine „FLUG REVUE“
UAS: New Media Applications*
Red Bull Media House
Additive Manufacturing / 3D Printing in Aerospace: Latest Developments*
organized by Wohlers Associaties, Inc. (USA)
Access to Finance: available EU funding for small and medium-sized enterprises,
including Co-operation Lounge*
organized by Dr. Panteleïmon Panagiotou (Bavarian Research Alliance BayFOR)
Electrical Flying*
organized by Dr. Frank Anton (Siemens AG)
Use of UAS in Civil Defense and Disaster Relief, including rescue exercise*
organized by Walter Kohlenz and Xaver Schruh
(German Life Saving Association DLRG)
Civilian Applications of UAS*
Peter Loef, network manager „UAS-INSYS“
Air Space Integration of UAS*
organized by Gregor Zowierucha (ESG Elektroniksystem-und Logistik-GmbH)
NATO Science and Technology Organization / Collaboration Support Office*
N.N.
* = all session titles are working titles
Symposium
UAV
From b-ionic flapping wing to
the first additive manufactured
plasma flyer
Berkant Göksel, Electrofluidsystems - IB Göksel, Germany
Robust Model Reference Adaptive Control of a Tailless Aircraft
in Coordinated Turn Maneuver
E. Kakavand, Shahid Beheshti
University, Islamic Republic of Iran
Development and production of
a lightweight-construction UAV
using additive manufacturing
Prof. Stefan Junk,University of
Applied Sciences Offenburg,
Germany
UAV Blimp for strong wind
disturbance
Stojan Stevanovic, German Aerospace Center (DLR), Germany
DESIGN AND DEVELOPMENT
OF AN AUTONOMOUS
ROTORCRAFT FOR EXTREME
ALTITUDES
Aaron Barth, TU München,
Institute of Helicopter Technology,
Germany
AIRBEAM: Project Presentation
and Main Results
Niklas Goddemeier, Technical
University of Dortmund, Germany
Model Predictive Flightpath
Control for an Unmanned Powered Paraglider
Fabian Binz, Institute of Flight System Dynamics, RWTH Aachen,
Germany
Aerial Manipulation Prototype,
a Helicopter with Manipulability Capabilities: Analysis and
Experiments
Felix Huber, German Aerospace
Center DLR, Germany
Fault tree Analysis of Landing
Gear Control and Warning for
LSA 02 Motorized Glider Type
Aircraft
Fuad Surastyo Pranoto, Indonesian National Institute of Aeronautics and Space, Indonesia
Development of a Cognitive
UAV for Medical Assistance
Application: Integration of a
Soar Agent in ROS
Shahmi Junoh, Silver Atena
Electronic Systems Engineering
GmbH, Germany
Experimental verification of
aircraft model used in the laboratory stand for hardware-software in the loop testing
Grzegorz Kopecki, Rzeszów
University of Technology, Poland
Parachute Design and Wind
Tunnel Testing of Class 10 kg
LAPAN UAV's Recovery System
Teuku Mohd Ichwanul Hakim,
Indonesian Institute of Aeronautics
and Space (LAPAN), Germany
Investigating Transient Performance Trade-Offs for Fixed
Pitch Propeller VTOL UAV
Guido Wortmann, Munich
Aerospace e.V., Germany
DLR HABLEG – STRATOSPHERIC FLIGHT RESEARCH
Sven Wlach, German Aerospace
Centre DLR, Germany
Automatic fuselage shape
definition for optimal sensor
integration
Jens Feger, Technical University Munich, Institute of Aircraft
Design, Germany
System Modelling of a Fluidic
Flight Control System for Preliminary Design Stages
Korbinian Stadlberger, Technical
University Munich, Institute of
Aircraft Design, Germany
Transonic flow in valve for pneumatic adaptive shock absorber
Pawel Flaszynski, Polish Academy of Sciences - IMP PAN,
Poland
Increase of payload capacity
and operational availability for
high altitude long endurance
UAV
Tin Muskardin, German Aerospace Center (DLR), Germany
Dynamic Similarity for Tiltwing
Aircraft Controller Design
Philipp Hartmann, Institute of
Flight System Dynamics, RWTH
Aachen, Germany
Visual Navigation for Flying
Robots
Maximilian Laiacker, German
Aerospace Center DLR, Germany
Robotic Manipulator System for
Rotary-wing UAVs Operating
from Ships
Moritz Maier, German Aerospace Center (DLR), Germany
Reasoning to choose C2 link
for RPAS integration into civil
airspace satisfying ICAO requirements
Eduard Falkov, State Research
Institute of Aviation Systems (GosNIIAS), Russia
US National Research Council
Research Agenda for Autonomy
in Civil Airspace
Larrell B Walters, University of
Dayton Research Institute, USA
An Aircraft Position Broker
Based on Reliable Multilink
Communication for Cross Platform Collision Avoidance
Niklas Goddemeier, Technical
University of Dortmund, Germany
Automated Mission Planning
using 4D Trajectories
Sébastien Duflot, ESG Elektroniksystem- und Logistik-GmbH,
Germany
Chairman
Prof. Dr Florian Holzapfel,
Institute of Flight System
Dynamics,
Technical University of
Munich Germany
Vice Chairman
Prof. Dr Dieter Moormann,
Institute of Flight System
Dynamics,
RWTH Aachen University,
Germany
Welcome to Munich
The new venue of AIRTEC
Social Programme
TUE Nov 3, 2015
Bavaria State Reception*
Munich Residenz
WED Nov 4, 2015
Get-together Evening**
Hofbräuhaus Munich
FRI Nov 6, 2015
Choice of excursions**
Neuschwanstein Castle
and others
» 10th Anniversary of AIRTEC and
Premiere in Munich. With joint
forces and spirit to its success. «
Diana Schnabel, CEO / President of AIRTEC
6
AIRTEC 2015 | New Location
* = by invitation only
** = additional charges apply
AIRTEC 2015 | New Location
7
Save the date
November 3 – 5, 2015
Munich, Germany
Contact
airtec GmbH & Co. KG
P.O. Box 700 164
60551 Frankfurt / Main, Germany
T +49 (0) 69 27 40 03 15
F +49 (0) 69 27 40 03 44
[email protected]
All contents of this document subject to change without notice.
As of June 10th, 2015.
Exhibit. Participate. www.uavworld.aero