1. No category

Cabinet Furniture
Frank Allart & Company
Makers of fine English hardware
since 1914.
Frank Allart & Company was founded in 1914 by
George Allart and originally named after him.
The company started as patternmakers, but soon
built up a reputation for high-class brassware for the
architectural, cabinetry, marine and railway trades.
Today, Frank Allart operates from a modern,
purpose built, manufacturing facility in the heart
of Birmingham, England. With a thriving design
department, which blends the use of computer-aided
design with more traditional arts such as model
making we are constantly updating and widening the
range of products we offer. We are also able to offer
in-house design and development of custom and
bespoke products to customer specification.
Our high quality hardware can be found fitted in
prestigious homes, palaces, hotels and listed buildings
around the world.
This brochure focuses on our extensive selection of
cabinet furniture - knobs, pull handles, appliance
pulls, ring pulls, flush rings and catches. Available
in up to 32 different finishes (with finished matched
screws of course) and designed to complement our
full range of door furniture.
With an utmost attention
to detail, all our products
are meticulously hand
finished to the highest
possible standard to meet
the aspirations of today's
discerning customer.
We've been manufacturing
cupboard knobs for over
a century, as seen here
in one of the very early
George Allart catalogues.
Cabinet Knobs
9596
9598
B size shown
Knob size
P (proj)
9596 A
32 x 16
25
9596 B
38 x 19
27
Knob
size
40 x 20
P
38 x 19
30
9591
shown
P
9592
shown
9590 A
9592 B
9591
9593
Knob
Plate
19 x 12
Ø 19
17
25 x 16
Ø 25
22
9591
9590
9593
9592
P (proj)
C
32 x 20
Ø 32
28
D
38 x 24
Ø 38
33
A
19 x 12
-
16
B
25 x 16
-
21
C
32 x 20
-
27
D
38 x 24
-
32
All products above shown D size
round edge design
P
P
0675
0668
0668
0675
Both products above shown B size
square edge design
P
P
0669
0669
0676
Both products above shown B size
Knob
P (proj)
0675 A
0676 B
25 x 13
21
Knob
Plate
P (proj)
25 x 13
40 x 16
24
25
0668 A
0669 B
30 x 17
30 x 17
50 x 21
C
37 x 19
28
31
C
37 x 19
60 x 23
34
Fixings: All supplied with M4 x 50mm
break-off flange head machine screws.
Dowel Screw
option available
3
0676
Cabinet Knobs
D
0692
0693
0694
0695
D
p
P
0692-7
A
B
C
D
D (dia)
Ø 19
Ø 25
Ø 32
Ø 38
p (proj)
19
23
29
35
P (proj)
20
24
30
36
0696
0697
All products above shown C size
D
D
p
P
0677-8
A
B
C
D
D (dia)
Ø 19
Ø 25
Ø 32
Ø 38
p (proj)
17
23
27
32
P (proj)
18
24
28
33
0677
0678
Both products above shown D size
31
25
23
31
0671
0672
25
0689
0690
All products above shown C size
24
0691
P
D
Fixings: All supplied with M4 x 50mm
break-off flange head machine screws.
0689/0690/0691
A
B
C
D
D (depth/dia)
19
25
32
38
P (proj)
19
25
32
38
Dowel Screw
option available
4
Cabinet Knobs
0698
0699
Both products above shown B size
0698-9
A
B
HxW
30 x 16
38 x 21
Ø 32
D (dia)
Ø 25
p (proj)
23
28
P (proj)
24
29
HxW
HxW
D
P
p
D
p
P
0666
0667
computer generated images - B size shown
Ø 32
0666-7
A
B
C
D
D (dia)
Ø 19
Ø 25
Ø 32
Ø 38
p (proj)
19
24
31
38
P (proj)
20
25
32
39
Ø 30
23
27
0686
0687
HxW
p
P
0664
0665
0664-5
A
B
C
HxW
25 x 25
32 x 32
38 x 38
p (proj)
23
29
35
P (proj)
24
31
37
computer generated images - B size shown
HxW
p
P
0683-4
A
B
C
HxW
25 x 25
32 x 32
38 x 38
p (proj)
21
27
33
P (proj)
23
29
35
0683
0684
Both products above shown B size
Fixings: All supplied with M4 x 50mm
break-off flange head machine screws.
Dowel Screw
option available
5
Cabinet Knobs
D
9176
9171
9177
9172
9178
D
p
P
9171-79
9174
A
B
C
D
D (dia)
Ø 16
Ø 25
Ø 32
Ø 38
p (proj)
14
23
28
34
P (proj)
16
25
32
38
9173 (not available in size A)
9179 (not available in size A)
All products above shown C size
D
P
D
P
0685
0680
Both products above shown C size
0680/0685
A
B
C
D
E
D (dia)
Ø 19
Ø 25
Ø 32
Ø 38
Ø 44
P (proj)
27
37
46
55
64
D
P
0670
D
C size shown
0670
A
B
C
D
D (dia)
Ø 19
Ø 25
Ø 32
Ø 38
P (proj)
19
25
32
38
P
Fixings: All supplied with M4 x 50mm
break-off flange head machine screws.
B size shown
0674
0674
A
B
C
D (dia)
Ø 25
Ø 32
Ø 38
P (proj)
25
32
38
Dowel Screw
option available
6
Cabinet Knobs
7220 shown
7210 shown
Domed Oval Knob (32mm)
Oval Knob (32mm)
30
21
22
35
32
32
BOTH Oval and Domed Oval Knob designs are available in seven rosette designs
7210
7211
7212
7213
7214
7215
7216
Domed Oval 7220
7221
7222
7223
7224
7225
7226
Oval
32
23
38
27
39
7245 shown
7232 shown
38
Domed Oval Knob (38mm)
Oval Knob (38mm)
BOTH Oval and Domed Oval Knob designs are available in seven rosette designs
7230
7231
7232
7233
7234
7235
7236
Domed Oval 7240
7241
7242
7243
7244
7245
7246
Oval
H
0681
screw
positions
P
0681/2
HxW
P (proj)
A
W
B
32 x 21 38 x 24
31
35
0681 (face fix)
A size shown
0682
A size shown
H
p
P
9168/9
A
B
HxW
32 x 22
38 x 27
P (proj)
35
41
p (proj)
31
37
W
can be fitted in either
orientation
9168
Fixings: All supplied with M4 x 50mm break-off flange head
machine screws (except 0681 supplied with finish matched
wood screws).
7
A size shown
9169
Dowel Screw
option available
A size shown
Bakes Pulls and Bakes Knobs
Classic Robert Bakes designed Pulls & Cabinet Knobs. The Pulls are available in five
sizes from 130mm up to 375mm, whilst the Knobs are offered in two sizes.
0661B
0661A
0661
H
HxW
P (proj)
P
A
B
33 x 46 38 x 53
31
35
W
Fixings: All supplied with M4 x 50mm
break-off flange head machine screws.
Dowel Screw
option available
E
D
C
B
A
0660
P
C
L
0660
A
B
C
D
E
L (length)
130
155
182
240
375
C (centres)
101
126
152
203
330
P (proj)
26
26
31
38
51
Fixings: Supplied with M4 x 50mm break-off flange head machine screws
(except 0660E - M8 x 50mm plain machine screws).
8
Pull Handles & Appliance Pulls
A selection of traditional solid cast,
offset design Pull Handles with a variety
of installation options.
P
C
L
1433-5
L (length)
C (centres)
P (proj)
AA
162 (158*)
122 (116*)
40 (41*)
A
201
152
54
B
254
191
60
C
302 (305*)
234
64 (53*)
* Due to different manufacturing processes, the solid bronze
version of the AA and C size slightly differ dimensionally
from the brass based version.
1433 face fixed & rear bolt fixing / 1434 rear bolt fixing only / 1435 face fixed only
Ø 40
L
C
159
245
6999
6999
A
B
L
C
(length) (centres)
240
270
216
245
P
(proj)
58
62
62
3934
offset design
Fixings: 1433 supplied with finish matched wood screws and M6 x 50mm machine screws. 1435 supplied with finish
matched wood screws. 1434, 3934 & 6999 supplied with M6 x 50mm machine screws.
9
Appliance Pulls
C
D
P
1910-17 C (centres) P (proj)
Rosette options D (dia)
A
209
56
Ø 38 Ø 44 Ø 54 Ø 64
B
241
56
Ø 38 Ø 44 Ø 54 Ø 64
Appliance Pull available in two lengths and with eight Rosette designs,
each in four diameters (Ø54mm shown below)
1911
shown A size
with 54mm Ø
rosettes
1910
1911
1914
1915
1912
1913
1916
1917
C
D
P
1982-89 C (centres) P (proj)
Rosette options D (dia)
A
218
60
Ø 38 Ø 44 Ø 54 Ø 64
B
250
60
Ø 38 Ø 44 Ø 54 Ø 64
Pull available in two lengths and with eight Rosette designs,
each in four diameters (Ø44mm shown below).
1986
shown A size
with 44mm Ø
rosettes
1982
1983
1984
1985
1986
1987
1988
1989
offset design
Fixings: All supplied with M6 x 50mm machine screws.
10
Appliance Pulls
C
4359
shown B size
with 54mm Ø
rosettes
D
P
4350-61
C (centres) P (proj) Rosette Options D (dia)
A
175
54
B
226
61
Ø 44
Ø 38 only
Ø 54
Ø 64
C
310
73
Ø 44
Ø 54
Ø 64
Pull available in three lengths with twelve Rosette designs
(Ø54mm Rosette shown below)
4350
4351
4352
4353
4354
4355
4356
4357
4358
4359
4360
4361
C
L
L
P
P
4325
1442
L (length) P (proj)
L (length) C (centres) P (proj)
192
175
47
A
152
36
B
247
226
54
B
184
45
C
336
310
66
A
1442
4325
Fixings: All supplied with M8 x 50mm machine screws (except 1442 - supplied with finish matched
no.6 x 19mm wood screws).
11
Cabinet & Appliance Pulls
9502
9503
114
42
94
31
9504
100
Fixings: 9502/3 supplied with M4 x 50mm break-off flange head machine screws.
9504 supplied with finish matched no.6 x 19mm wood screws.
70
32
C
L
305
190
P
A
B
L (length)
9512
210
254
C (centres)
190
232
P (proj)
40
46
LH
Proj 52
RH
9531
offset design, RH shown
9512
offset design, shown RH
Fixings: 9512 & 9531 supplied with M6 x 50mm machine screws.
12
Ring Pull, Flush Rings & Flush Catch
38
Ø 32
2469
0881 Flush Ring
M
24
1025 Flush Catch
1372 Flush Ring
W
M
6
13
L
13
0881
A
B
C
L
(length)
38
51
64
W
(width)
32
38
51
M
(mortice)
10
13
13
D
38
51
1372
D
M
(diameter) (mortice)
A
38
13
B
50
16
Fixings: All supplied with finish matched no.4 x 13mm wood screws (except 0881 - supplied with no.6 x 19mm).
A few examples shown
from a large selection
of Traditional Lipped
Edge Flush Pulls are also
available - please see our
main catalogue, website
or contact us for further
information.
13
Product Overview
9596
9598
0692
0693
9172
9178
9592
9593
0695
0694
0697
9173
9176
9179
0666
0670
0674
0667
7220-6
7210-6
7230-6
0683
0672
0660
0681
0685
0680
0684
0664
0675
0671
1433-5
6999
9591
9590
0696
9174
0677
0678
7240-6
9168
9169
0691
0665
0668
3934
0687
9177
9171
0661
0698
0699
0682
0686
0689
0690
0676
0669
1910-7
1982-9
9502
9503
9531
1442
4350-61
4325
9504
9512
Metal Finishes & Patinas
PB
Polished Brass (lacquered)
PBU
SB
Polished Brass Unlacquered
Satin Brass (lacquered)
SBU
Satin Brass Unlacquered
ABU
IBU
HBB
HBN
Antique Brass Unlacquered
Imperial Brass Unlacquered
Hand Burnished Brass
Hand Burnished Nickel
PC
SC
SN
PN
Polished Chrome
Satin Chrome
Satin Nickel
Polished Nickel
PRL
Pearl Nickel
AN
Antique Nickel
AS
Antique Silver
MBN
PBN
Matt Black Nickel
Polished Black Nickel
AND
Antique Nickel - Distressed
SNB
Satin Nickel - Bronzed
SP
BS
Polished Silver
Butlers Silver
CHB
EBB
DMB
Chestnut Bronze
Ebony Bronze
Dark Matt Bronze (lacquered)
IMPORTANT - Due to the restrictions within
the printing process product appearances may
vary to the images shown. Actual swatch samples
are available upon request.
PKU
Polished Copper Unlacquered
For further information please see website.
SKU
Satin Copper Unlacquered
SOLID BRONZE FINISHES
Due to the production processes used to
manufacture solid bronze products, only a restricted
number of items within this brochure are available
in solid bronze.
Please see price list or website for availability.
PGU
PGA
Polished Solid Bronze - Antiqued
SGU
Polished Solid Bronze Unlacquered Satin Solid Bronze Unlacquered
15
RG
Rustic Solid Bronze
SGA
Satin Solid Bronze - Antiqued
RGD
Rustic Solid Bronze - Dark
Reproduced with kind permission of Superior Woodcraft Inc.
Cabinet Furniture is just part of our full range of door and window
products, please see our website for more information.
Create a different look using our cremone bolts as shown here fitted to
bespoke kitchen cupboards. We have seven different cremone bolt designs
to choose from to create a truly unique look.
Frank Allart & Company Ltd., 15/35 Great Tindal Street, Birmingham B16 8DR UK
Tel: +44 (0)121 410 6000. [email protected]
USA Sales Office: 64 Wall Street, Suite 402, Norwalk CT 06850, USA
Tel: 888 582 9110 (toll free). [email protected]
www.frankallart.com