1. No category

Specifications
FLOOR BOX
714L
FB-1 & FB-2
Single Gang Box Specs
FB-1
FB-2
• Cut-in hole size: 2.625" x 4.437"
• Box size (no flange): 3.5" (D) x 2.498" (W) x 4.312" (H)
• Flange outside dimension: 3.250" x 4.883"
• Cover dimension: 0.217" (D) x 3.5" (W) x 5.125" (H)
• Box wire capacity: 24.5 cu. in.
• (2) ½" knockouts on bottom and (2) ½" knockouts on the side wall
• (2) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plug: matches cover with nitrile O-ring
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-3 & FB-4
Round Floor Box Specs
FB-3
FB-4
• Cut-in hole size: 4.0" Dia. (standard hole saw size)
• FB-3 box size (no flange): 3.0" (Deep) x 3.936" dia.
• FB-4 box size (no flange): 3.433" (Deep) x 3.936 dia.
• Flange outside dimension: FB-3 (5.0" dia.) - FB-4 (5.250" dia.)
• Cover dimension(FB-3): 5.25" dia. x 0.217" thickness
• Cover dimension(FB-4): 5.75" dia. x 0.237" thickness
• (2) Dust Plate Keystone Openings(FB-4): .575" x .765"
• Box wire capacity: FB-3 (24.5 cu. in.), FB-4 (19.5 cu. in.)
• FB-3 - (2) ½" knockouts on bottom
• FB-4 - (1) ½" knockout on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plugs: matches cover with nitrile O-ring
Low Voltage Plates: (FB-4) With closed-cell gaskets
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: nonmetallic with copper terminals and brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-5
Two Gang Floor Box Specs
FB-5
Order Today!
 Phone: 1-800-722-2679
• Cut-in hole size: 4.625" x 4.437"
• Box size (no flange): 4.056" (D) x 4.498" (W) x 4.335" (H)
• Flange outside dimension: 5.508" x 5.133"
• Cover dimension: .222" (D) x 6.000" (W) x 5.625" (H)
• (4) Dust plate keystone openings(FB-5): .575" x .765"
• Box wire capacity: 44.5 cu. in.
• (2) ½” knockouts on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Flip Lids: matches cover
Gaskets: closed-cell rubber
Box screws and wings: galvanized steel
Dust plates: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
 Fax: 1-800-237-7269
 Email: [email protected]
Installation Instructions
2
1
Floor Box Assemblies
3
FB-4 (Round with LV keystone provision)
FB-5 (2-gang with LV keystone provision)
New
Options!
Allied Moulded is now offering two new assemblies
to its extensive line of floor box products. The round
FB-4 is similar in design to Allied Moulded’s popular
FB-3 assembly, but includes a provision for adding
two industry standard low voltage keystone plugins.
The square FB-5 is a two-gang assembly featuring a
new decorative style device along with flip lid covers
and a provision for four industry standard low voltage
keystone plugins or a second device.
Find a location in between floor joists and Once measured, place the installation
template on the floor and cut a hole
measure the box dimensions according to
the template supplied in the installation accordingly. A small drill, jigsaw, or hole
saw can be used to precisely cut the
instruction sheet.
hole required.
4
5
Bring the electrical cable through the
preferred box clamp, and place the box
down in the hole and secure it with the
preferred mounting method. Wire the
device according to local electrical code.
Both assemblies are available in three cover finish
options including brass, dark bronze, and nickelplated brass.
Once the device has been wired, secure
Place the cover gasket on the box flange
the device and dust plate down into the box
and position the cover assembly over
using the screws supplied in the packaging. the gasket to ensure an adequate seal
between box and lid is met.
Secure the cover to the box with the
screws supplied in the packaging. Attach
all screw plugs and keystone plugs as
required.
Available Through:
222 North Union St.
Bryan, OH 43506
Phone: 800.722.2679
Fax: 800.237.7269
Industry standard LV keystone
plugins installed. Note: LV
plugins are not supplied with the
FB-4 assembly
FB-4 & FB-5
Floor Box Series Part Numbers
The FB-5 comes standard with
one decorative device and two
plates for installing an additional
device or up to 4 LV keystone
plugins, plus the required low
voltage box divider plate
Industry standard LV keystone
plugins installed. Low voltage
divider plate is factory installed
per code requirements. Note: LV
plugins are not supplied with the
FB-5 assembly
Designed in USA • Made in China
Cu. In.
Volume
Catalog
Number
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
19.5
FB-4*
Round box, brass cover, duplex device, 2 LV keystone openings,
screw plugs, flange and wing bracket mount
99072
6
12
19.5
FB-4DB
Round box, dark bronze cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99073
6
12
19.5
FB-4N
Round box, nickel-plated cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99074
6
12
44.5
FB-5
Two-gang box, brass cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99075
6
14
44.5
FB-5DB
Two-gang box, dark bronze cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99076
6
14
44.5
FB-5N*
Two-gang box, nickel-plated cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99077
6
14
Component Description
*Represents picture shown
www.alliedmoulded.com
 Phone: 1-800-722-2679
FB-4
6
The FB-4 comes standard with
a duplex device and provision
for adding 2 standard LV
keystone plugins
Order Today!
FB-5
Floor Box Trifold 03/2015
 Fax: 1-800-237-7269
 Email: [email protected]
w w w. a l l i e d m o u l d e d . c o m
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269
Floor Box Assemblies
Replacement Parts
Concrete Adapter Kit
Floor Box Features & Benefits
• Designed for use in wood floor construction and can be
installed with multiple floor substrate materials (ceramic,
hardwood, laminate, or carpet)
Floor Box
Replacement Parts
Designed in USA • Made in China
• Optional cover material types: brass, dark bronze, or nickel-
Features & Benefits
plated brass
• Cover plug screws seal water tight and allow assembly to
meet UL 514C scrub-water exclusion test
• TR Tamper Resistant receptacle; 15 amp 125 volt with ground
(NEMA config. 5-15R)
• Extra deep wiring capacity at 24.5 cubic inches
• UL listed in accordance with the requirements for floor boxes
®
in Article 314.27 of the NEC
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1CVR
Single gang simplex brass cover, plug with O-ring, cover seal,
mounting screws
94131
1
1
FB-1NCVR*
Single gang simplex nickel-plated cover, plug with O-ring, cover
seal, mounting screws
94132
1
1
FB-2CVR*
Single gang duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94133
1
1
FB-2NCVR
Single gang duplex nickel-plated cover, 2 plugs with O-rings, cover
seal, mounting screws
94134
1
1
FB-2DBCVR
Single gang duplex dark bronze cover, 2 plugs with O-rings, cover
seal, mounting screws
99602
1
1
FB-3CVR
Round duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94135
1
1
FB-3DBCVR*
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal,
mounting screws
99604
1
1
FB-3NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal,
mounting screws
94136
1
1
FB-4CVR*
Round duplex brass cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99078
1
1
FB-4DBCVR
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99079
1
1
FB-4NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99080
1
1
FB-5CVR
Two gang decorative brass cover, flip lids, cover seal, mounting screws
99081
1
1
FB-5DBCVR*
Two gang decorative dark bronze cover, flip lids, cover seal,
mounting screws
99082
1
1
FB-5NCVR
Two gang decorative nickel-plated cover, flip lids, cover seal,
mounting screws
99083
1
1
FB-BRPLGLV*
2 brass LV keystone plates, mounting screws
99084
1
1
FB-DBPLGLV
2 dark bronze LV keystone plates, mounting screws
99085
1
1
FB-NPLGLV
2 dark nickel-plated LV keystone plates, mounting screws
99086
1
1
Catalog Number
Component Description
• Provisions for cable entry through molded-in Speed Klamps™
or 1/2" knockouts
Allied Moulded’s series of floor box assemblies was designed
specifically for “poke through” wood floor applications and
can be used in many different flooring applications including
carpet, ceramic tile, laminate, or wood flooring.
• Steel wing brackets for secure installation
• Basic rectangular or round exterior profile for quick and easy
cut-in installation
These residential floor boxes are available in two different
box types, including rectangular and round profiles and have
three different finish options including brass, dark bronze,
and nickel-plated brass.
Scan QR code to learn
more about our new
floor box products!
FB-1 • FB-2 • FB-3
Floor Box Series Part Numbers
Cu. In.
Volume
Designed in USA • Made in China
Designed in USA • Made in China
Catalog
Number
UPC#
85339
Component Description
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1
24.5
FB-1N*
Single gang box, nickel-plated cover, simplex device, flange and
wing bracket mount
94128
6
8
24.5
FB-2*
Single gang box, brass cover, duplex device, flange and wing
bracket mount
94124
6
8
FB-BRPLG*
1 threaded brass screw plug with O-ring
94137
1
1
24.5
FB-2DB
Single gang box, dark bronze cover, duplex device, flange and
wing bracket mount
99601
6
8
FB-DBPLG
1 threaded dark bronze screw plug with O-ring
99605
1
1
24.5
FB-2N
Single gang box, nickel-plated cover, duplex device, flange and
wing bracket mount
94129
6
8
FB-NPLG
1 threaded nickel-plated screw plug with O-ring
94138
1
1
8
Allied Moulded Products, Inc.
Floor Box Assemblies:
• FB-3/FB-4 (Brass)
• FB-3DB/FB-4DB (Dark
Bronze-plated Brass)
• FB-3N/FB-4N (Nickel-plated
Brass)
• Quick and easy installation with fewer
• Floor box comes with a standard TR
tamper resistant receptacle; 15amp,
125 volt with ground (NEMA config.
5-15R)
can be adapted to many standard
PVC concrete junction boxes
FB-CAK
Concrete Adapter Kit
Includes:
• Adapter sealing gasket
• Adapter ring
• Detailed installation
instructions
UL® recognized
for use with
Round PVC Concrete
Junction Boxes with an
inside diameter of
4-½" - 4-9/16".
These include, but are not
limited to the following:
• Arlington FLBC4500
• Cantex, 5133758/5133760
• Carlon, E971FB
• Ipex/Sceptor, FB 076954
• Kraloy, FB 078876
• Lew, FB/FBLEW
Scan QR code for
more information.
FB-CAK
Concrete Adapter Kit
Catalog
Number
FB-CAK
NOTE: Cover kit part numbers above are only approved for use with Allied Moulded floor boxes.
Made in USA
Component Description
Concrete Adapter Kit contains adapter sealing gasket, adapter ring, and
detailed installation instructions
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
99479
6
3
24.5
FB-3
Round box, brass cover, duplex device, flange and wing bracket
mount
94125
6
9
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB, & FB-3N/FB-4N residential floor box assemblies to standard industry
concrete junction boxes
24.5
FB-3DB*
Round box, dark bronze cover, duplex device, flange and wing
bracket mount
99603
6
9
UL® recognized for use with Round PVC Concrete Junction Boxes with an inside diameter of 4-½" - 4-9/16".
FB-3N
Round box, nickel-plated cover, duplex device, flange and wing
bracket mount
94130
6
9
24.5
These include, but are not limited to, the following: Arlington FLBC4500, Cantex, 5133758/5133760; Carlon, E971FB; Ipex/Sceptor,
FB 076954; Kraloy, FB 078876; Lew, FB/FBLEW
*Represents picture shown
w w w. a l l i e d m o u l d e d . c o m
Order Today!
UL 514C scrub water exclusion test
• Allied Moulded floor box assemblies
24.5
6
• Installed floor box assembly meets
floor box and device components
Single gang box, brass cover, simplex device, flange and wing
bracket mount
94123
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB and FB-3N/FB-4N residential floor box
assemblies to standard industry concrete junction boxes
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Floor Box Assemblies
Replacement Parts
Concrete Adapter Kit
Floor Box Features & Benefits
• Designed for use in wood floor construction and can be
installed with multiple floor substrate materials (ceramic,
hardwood, laminate, or carpet)
Floor Box
Replacement Parts
Designed in USA • Made in China
• Optional cover material types: brass, dark bronze, or nickel-
Features & Benefits
plated brass
• Cover plug screws seal water tight and allow assembly to
meet UL 514C scrub-water exclusion test
• TR Tamper Resistant receptacle; 15 amp 125 volt with ground
(NEMA config. 5-15R)
• Extra deep wiring capacity at 24.5 cubic inches
• UL listed in accordance with the requirements for floor boxes
®
in Article 314.27 of the NEC
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1CVR
Single gang simplex brass cover, plug with O-ring, cover seal,
mounting screws
94131
1
1
FB-1NCVR*
Single gang simplex nickel-plated cover, plug with O-ring, cover
seal, mounting screws
94132
1
1
FB-2CVR*
Single gang duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94133
1
1
FB-2NCVR
Single gang duplex nickel-plated cover, 2 plugs with O-rings, cover
seal, mounting screws
94134
1
1
FB-2DBCVR
Single gang duplex dark bronze cover, 2 plugs with O-rings, cover
seal, mounting screws
99602
1
1
FB-3CVR
Round duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94135
1
1
FB-3DBCVR*
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal,
mounting screws
99604
1
1
FB-3NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal,
mounting screws
94136
1
1
FB-4CVR*
Round duplex brass cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99078
1
1
FB-4DBCVR
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99079
1
1
FB-4NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99080
1
1
FB-5CVR
Two gang decorative brass cover, flip lids, cover seal, mounting screws
99081
1
1
FB-5DBCVR*
Two gang decorative dark bronze cover, flip lids, cover seal,
mounting screws
99082
1
1
FB-5NCVR
Two gang decorative nickel-plated cover, flip lids, cover seal,
mounting screws
99083
1
1
FB-BRPLGLV*
2 brass LV keystone plates, mounting screws
99084
1
1
FB-DBPLGLV
2 dark bronze LV keystone plates, mounting screws
99085
1
1
FB-NPLGLV
2 dark nickel-plated LV keystone plates, mounting screws
99086
1
1
Catalog Number
Component Description
• Provisions for cable entry through molded-in Speed Klamps™
or 1/2" knockouts
Allied Moulded’s series of floor box assemblies was designed
specifically for “poke through” wood floor applications and
can be used in many different flooring applications including
carpet, ceramic tile, laminate, or wood flooring.
• Steel wing brackets for secure installation
• Basic rectangular or round exterior profile for quick and easy
cut-in installation
These residential floor boxes are available in two different
box types, including rectangular and round profiles and have
three different finish options including brass, dark bronze,
and nickel-plated brass.
Scan QR code to learn
more about our new
floor box products!
FB-1 • FB-2 • FB-3
Floor Box Series Part Numbers
Cu. In.
Volume
Designed in USA • Made in China
Designed in USA • Made in China
Catalog
Number
UPC#
85339
Component Description
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1
24.5
FB-1N*
Single gang box, nickel-plated cover, simplex device, flange and
wing bracket mount
94128
6
8
24.5
FB-2*
Single gang box, brass cover, duplex device, flange and wing
bracket mount
94124
6
8
FB-BRPLG*
1 threaded brass screw plug with O-ring
94137
1
1
24.5
FB-2DB
Single gang box, dark bronze cover, duplex device, flange and
wing bracket mount
99601
6
8
FB-DBPLG
1 threaded dark bronze screw plug with O-ring
99605
1
1
24.5
FB-2N
Single gang box, nickel-plated cover, duplex device, flange and
wing bracket mount
94129
6
8
FB-NPLG
1 threaded nickel-plated screw plug with O-ring
94138
1
1
8
Allied Moulded Products, Inc.
Floor Box Assemblies:
• FB-3/FB-4 (Brass)
• FB-3DB/FB-4DB (Dark
Bronze-plated Brass)
• FB-3N/FB-4N (Nickel-plated
Brass)
• Quick and easy installation with fewer
• Floor box comes with a standard TR
tamper resistant receptacle; 15amp,
125 volt with ground (NEMA config.
5-15R)
can be adapted to many standard
PVC concrete junction boxes
FB-CAK
Concrete Adapter Kit
Includes:
• Adapter sealing gasket
• Adapter ring
• Detailed installation
instructions
UL® recognized
for use with
Round PVC Concrete
Junction Boxes with an
inside diameter of
4-½" - 4-9/16".
These include, but are not
limited to the following:
• Arlington FLBC4500
• Cantex, 5133758/5133760
• Carlon, E971FB
• Ipex/Sceptor, FB 076954
• Kraloy, FB 078876
• Lew, FB/FBLEW
Scan QR code for
more information.
FB-CAK
Concrete Adapter Kit
Catalog
Number
FB-CAK
NOTE: Cover kit part numbers above are only approved for use with Allied Moulded floor boxes.
Made in USA
Component Description
Concrete Adapter Kit contains adapter sealing gasket, adapter ring, and
detailed installation instructions
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
99479
6
3
24.5
FB-3
Round box, brass cover, duplex device, flange and wing bracket
mount
94125
6
9
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB, & FB-3N/FB-4N residential floor box assemblies to standard industry
concrete junction boxes
24.5
FB-3DB*
Round box, dark bronze cover, duplex device, flange and wing
bracket mount
99603
6
9
UL® recognized for use with Round PVC Concrete Junction Boxes with an inside diameter of 4-½" - 4-9/16".
FB-3N
Round box, nickel-plated cover, duplex device, flange and wing
bracket mount
94130
6
9
24.5
These include, but are not limited to, the following: Arlington FLBC4500, Cantex, 5133758/5133760; Carlon, E971FB; Ipex/Sceptor,
FB 076954; Kraloy, FB 078876; Lew, FB/FBLEW
*Represents picture shown
w w w. a l l i e d m o u l d e d . c o m
Order Today!
UL 514C scrub water exclusion test
• Allied Moulded floor box assemblies
24.5
6
• Installed floor box assembly meets
floor box and device components
Single gang box, brass cover, simplex device, flange and wing
bracket mount
94123
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB and FB-3N/FB-4N residential floor box
assemblies to standard industry concrete junction boxes
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Floor Box Assemblies
Replacement Parts
Concrete Adapter Kit
Floor Box Features & Benefits
• Designed for use in wood floor construction and can be
installed with multiple floor substrate materials (ceramic,
hardwood, laminate, or carpet)
Floor Box
Replacement Parts
Designed in USA • Made in China
• Optional cover material types: brass, dark bronze, or nickel-
Features & Benefits
plated brass
• Cover plug screws seal water tight and allow assembly to
meet UL 514C scrub-water exclusion test
• TR Tamper Resistant receptacle; 15 amp 125 volt with ground
(NEMA config. 5-15R)
• Extra deep wiring capacity at 24.5 cubic inches
• UL listed in accordance with the requirements for floor boxes
®
in Article 314.27 of the NEC
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1CVR
Single gang simplex brass cover, plug with O-ring, cover seal,
mounting screws
94131
1
1
FB-1NCVR*
Single gang simplex nickel-plated cover, plug with O-ring, cover
seal, mounting screws
94132
1
1
FB-2CVR*
Single gang duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94133
1
1
FB-2NCVR
Single gang duplex nickel-plated cover, 2 plugs with O-rings, cover
seal, mounting screws
94134
1
1
FB-2DBCVR
Single gang duplex dark bronze cover, 2 plugs with O-rings, cover
seal, mounting screws
99602
1
1
FB-3CVR
Round duplex brass cover, 2 plugs with O-rings, cover seal,
mounting screws
94135
1
1
FB-3DBCVR*
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal,
mounting screws
99604
1
1
FB-3NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal,
mounting screws
94136
1
1
FB-4CVR*
Round duplex brass cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99078
1
1
FB-4DBCVR
Round duplex dark bronze cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99079
1
1
FB-4NCVR
Round duplex nickel-plated cover, 2 plugs with O-rings, cover seal, 2
keystone plugs, mounting screws
99080
1
1
FB-5CVR
Two gang decorative brass cover, flip lids, cover seal, mounting screws
99081
1
1
FB-5DBCVR*
Two gang decorative dark bronze cover, flip lids, cover seal,
mounting screws
99082
1
1
FB-5NCVR
Two gang decorative nickel-plated cover, flip lids, cover seal,
mounting screws
99083
1
1
FB-BRPLGLV*
2 brass LV keystone plates, mounting screws
99084
1
1
FB-DBPLGLV
2 dark bronze LV keystone plates, mounting screws
99085
1
1
FB-NPLGLV
2 dark nickel-plated LV keystone plates, mounting screws
99086
1
1
Catalog Number
Component Description
• Provisions for cable entry through molded-in Speed Klamps™
or 1/2" knockouts
Allied Moulded’s series of floor box assemblies was designed
specifically for “poke through” wood floor applications and
can be used in many different flooring applications including
carpet, ceramic tile, laminate, or wood flooring.
• Steel wing brackets for secure installation
• Basic rectangular or round exterior profile for quick and easy
cut-in installation
These residential floor boxes are available in two different
box types, including rectangular and round profiles and have
three different finish options including brass, dark bronze,
and nickel-plated brass.
Scan QR code to learn
more about our new
floor box products!
FB-1 • FB-2 • FB-3
Floor Box Series Part Numbers
Cu. In.
Volume
Designed in USA • Made in China
Designed in USA • Made in China
Catalog
Number
UPC#
85339
Component Description
Std. Pkg.
Qty.
Std. Wt.
(lb.)
FB-1
24.5
FB-1N*
Single gang box, nickel-plated cover, simplex device, flange and
wing bracket mount
94128
6
8
24.5
FB-2*
Single gang box, brass cover, duplex device, flange and wing
bracket mount
94124
6
8
FB-BRPLG*
1 threaded brass screw plug with O-ring
94137
1
1
24.5
FB-2DB
Single gang box, dark bronze cover, duplex device, flange and
wing bracket mount
99601
6
8
FB-DBPLG
1 threaded dark bronze screw plug with O-ring
99605
1
1
24.5
FB-2N
Single gang box, nickel-plated cover, duplex device, flange and
wing bracket mount
94129
6
8
FB-NPLG
1 threaded nickel-plated screw plug with O-ring
94138
1
1
8
Allied Moulded Products, Inc.
Floor Box Assemblies:
• FB-3/FB-4 (Brass)
• FB-3DB/FB-4DB (Dark
Bronze-plated Brass)
• FB-3N/FB-4N (Nickel-plated
Brass)
• Quick and easy installation with fewer
• Floor box comes with a standard TR
tamper resistant receptacle; 15amp,
125 volt with ground (NEMA config.
5-15R)
can be adapted to many standard
PVC concrete junction boxes
FB-CAK
Concrete Adapter Kit
Includes:
• Adapter sealing gasket
• Adapter ring
• Detailed installation
instructions
UL® recognized
for use with
Round PVC Concrete
Junction Boxes with an
inside diameter of
4-½" - 4-9/16".
These include, but are not
limited to the following:
• Arlington FLBC4500
• Cantex, 5133758/5133760
• Carlon, E971FB
• Ipex/Sceptor, FB 076954
• Kraloy, FB 078876
• Lew, FB/FBLEW
Scan QR code for
more information.
FB-CAK
Concrete Adapter Kit
Catalog
Number
FB-CAK
NOTE: Cover kit part numbers above are only approved for use with Allied Moulded floor boxes.
Made in USA
Component Description
Concrete Adapter Kit contains adapter sealing gasket, adapter ring, and
detailed installation instructions
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
99479
6
3
24.5
FB-3
Round box, brass cover, duplex device, flange and wing bracket
mount
94125
6
9
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB, & FB-3N/FB-4N residential floor box assemblies to standard industry
concrete junction boxes
24.5
FB-3DB*
Round box, dark bronze cover, duplex device, flange and wing
bracket mount
99603
6
9
UL® recognized for use with Round PVC Concrete Junction Boxes with an inside diameter of 4-½" - 4-9/16".
FB-3N
Round box, nickel-plated cover, duplex device, flange and wing
bracket mount
94130
6
9
24.5
These include, but are not limited to, the following: Arlington FLBC4500, Cantex, 5133758/5133760; Carlon, E971FB; Ipex/Sceptor,
FB 076954; Kraloy, FB 078876; Lew, FB/FBLEW
*Represents picture shown
w w w. a l l i e d m o u l d e d . c o m
Order Today!
UL 514C scrub water exclusion test
• Allied Moulded floor box assemblies
24.5
6
• Installed floor box assembly meets
floor box and device components
Single gang box, brass cover, simplex device, flange and wing
bracket mount
94123
For use in adapting FB-3/FB-4, FB-3DB/FB-4DB and FB-3N/FB-4N residential floor box
assemblies to standard industry concrete junction boxes
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269
 Email: [email protected]
Order Today!
 Phone: 1-800-722-2679
 Fax: 1-800-237-7269
 Email: [email protected]
Specifications
FLOOR BOX
714L
FB-1 & FB-2
Single Gang Box Specs
FB-1
FB-2
• Cut-in hole size: 2.625" x 4.437"
• Box size (no flange): 3.5" (D) x 2.498" (W) x 4.312" (H)
• Flange outside dimension: 3.250" x 4.883"
• Cover dimension: 0.217" (D) x 3.5" (W) x 5.125" (H)
• Box wire capacity: 24.5 cu. in.
• (2) ½" knockouts on bottom and (2) ½" knockouts on the side wall
• (2) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plug: matches cover with nitrile O-ring
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-3 & FB-4
Round Floor Box Specs
FB-3
FB-4
• Cut-in hole size: 4.0" Dia. (standard hole saw size)
• FB-3 box size (no flange): 3.0" (Deep) x 3.936" dia.
• FB-4 box size (no flange): 3.433" (Deep) x 3.936 dia.
• Flange outside dimension: FB-3 (5.0" dia.) - FB-4 (5.250" dia.)
• Cover dimension(FB-3): 5.25" dia. x 0.217" thickness
• Cover dimension(FB-4): 5.75" dia. x 0.237" thickness
• (2) Dust Plate Keystone Openings(FB-4): .575" x .765"
• Box wire capacity: FB-3 (24.5 cu. in.), FB-4 (19.5 cu. in.)
• FB-3 - (2) ½" knockouts on bottom
• FB-4 - (1) ½" knockout on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plugs: matches cover with nitrile O-ring
Low Voltage Plates: (FB-4) With closed-cell gaskets
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: nonmetallic with copper terminals and brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-5
Two Gang Floor Box Specs
FB-5
Order Today!
 Phone: 1-800-722-2679
• Cut-in hole size: 4.625" x 4.437"
• Box size (no flange): 4.056" (D) x 4.498" (W) x 4.335" (H)
• Flange outside dimension: 5.508" x 5.133"
• Cover dimension: .222" (D) x 6.000" (W) x 5.625" (H)
• (4) Dust plate keystone openings(FB-5): .575" x .765"
• Box wire capacity: 44.5 cu. in.
• (2) ½” knockouts on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Flip Lids: matches cover
Gaskets: closed-cell rubber
Box screws and wings: galvanized steel
Dust plates: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
 Fax: 1-800-237-7269
 Email: [email protected]
Installation Instructions
2
1
Floor Box Assemblies
3
FB-4 (Round with LV keystone provision)
FB-5 (2-gang with LV keystone provision)
New
Options!
Allied Moulded is now offering two new assemblies
to its extensive line of floor box products. The round
FB-4 is similar in design to Allied Moulded’s popular
FB-3 assembly, but includes a provision for adding
two industry standard low voltage keystone plugins.
The square FB-5 is a two-gang assembly featuring a
new decorative style device along with flip lid covers
and a provision for four industry standard low voltage
keystone plugins or a second device.
Find a location in between floor joists and Once measured, place the installation
template on the floor and cut a hole
measure the box dimensions according to
the template supplied in the installation accordingly. A small drill, jigsaw, or hole
saw can be used to precisely cut the
instruction sheet.
hole required.
4
5
Bring the electrical cable through the
preferred box clamp, and place the box
down in the hole and secure it with the
preferred mounting method. Wire the
device according to local electrical code.
Both assemblies are available in three cover finish
options including brass, dark bronze, and nickelplated brass.
Once the device has been wired, secure
Place the cover gasket on the box flange
the device and dust plate down into the box
and position the cover assembly over
using the screws supplied in the packaging. the gasket to ensure an adequate seal
between box and lid is met.
Secure the cover to the box with the
screws supplied in the packaging. Attach
all screw plugs and keystone plugs as
required.
Available Through:
222 North Union St.
Bryan, OH 43506
Phone: 800.722.2679
Fax: 800.237.7269
Industry standard LV keystone
plugins installed. Note: LV
plugins are not supplied with the
FB-4 assembly
FB-4 & FB-5
Floor Box Series Part Numbers
The FB-5 comes standard with
one decorative device and two
plates for installing an additional
device or up to 4 LV keystone
plugins, plus the required low
voltage box divider plate
Industry standard LV keystone
plugins installed. Low voltage
divider plate is factory installed
per code requirements. Note: LV
plugins are not supplied with the
FB-5 assembly
Designed in USA • Made in China
Cu. In.
Volume
Catalog
Number
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
19.5
FB-4*
Round box, brass cover, duplex device, 2 LV keystone openings,
screw plugs, flange and wing bracket mount
99072
6
12
19.5
FB-4DB
Round box, dark bronze cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99073
6
12
19.5
FB-4N
Round box, nickel-plated cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99074
6
12
44.5
FB-5
Two-gang box, brass cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99075
6
14
44.5
FB-5DB
Two-gang box, dark bronze cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99076
6
14
44.5
FB-5N*
Two-gang box, nickel-plated cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99077
6
14
Component Description
*Represents picture shown
www.alliedmoulded.com
 Phone: 1-800-722-2679
FB-4
6
The FB-4 comes standard with
a duplex device and provision
for adding 2 standard LV
keystone plugins
Order Today!
FB-5
Floor Box Trifold 03/2015
 Fax: 1-800-237-7269
 Email: [email protected]
w w w. a l l i e d m o u l d e d . c o m
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269
Specifications
FLOOR BOX
714L
FB-1 & FB-2
Single Gang Box Specs
FB-1
FB-2
• Cut-in hole size: 2.625" x 4.437"
• Box size (no flange): 3.5" (D) x 2.498" (W) x 4.312" (H)
• Flange outside dimension: 3.250" x 4.883"
• Cover dimension: 0.217" (D) x 3.5" (W) x 5.125" (H)
• Box wire capacity: 24.5 cu. in.
• (2) ½" knockouts on bottom and (2) ½" knockouts on the side wall
• (2) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plug: matches cover with nitrile O-ring
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-3 & FB-4
Round Floor Box Specs
FB-3
FB-4
• Cut-in hole size: 4.0" Dia. (standard hole saw size)
• FB-3 box size (no flange): 3.0" (Deep) x 3.936" dia.
• FB-4 box size (no flange): 3.433" (Deep) x 3.936 dia.
• Flange outside dimension: FB-3 (5.0" dia.) - FB-4 (5.250" dia.)
• Cover dimension(FB-3): 5.25" dia. x 0.217" thickness
• Cover dimension(FB-4): 5.75" dia. x 0.237" thickness
• (2) Dust Plate Keystone Openings(FB-4): .575" x .765"
• Box wire capacity: FB-3 (24.5 cu. in.), FB-4 (19.5 cu. in.)
• FB-3 - (2) ½" knockouts on bottom
• FB-4 - (1) ½" knockout on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Screw plugs: matches cover with nitrile O-ring
Low Voltage Plates: (FB-4) With closed-cell gaskets
Gasket: closed-cell rubber
Box screws and wings: galvanized steel
Dust plate: galvanized steel
Device: nonmetallic with copper terminals and brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
FB-5
Two Gang Floor Box Specs
FB-5
Order Today!
 Phone: 1-800-722-2679
• Cut-in hole size: 4.625" x 4.437"
• Box size (no flange): 4.056" (D) x 4.498" (W) x 4.335" (H)
• Flange outside dimension: 5.508" x 5.133"
• Cover dimension: .222" (D) x 6.000" (W) x 5.625" (H)
• (4) Dust plate keystone openings(FB-5): .575" x .765"
• Box wire capacity: 44.5 cu. in.
• (2) ½” knockouts on bottom
• (4) molded-in Speed Klamps™ for securing NM cable
• Part material types:
Cover: brushed brass, nickel-plated brass or dark bronze
Flip Lids: matches cover
Gaskets: closed-cell rubber
Box screws and wings: galvanized steel
Dust plates: galvanized steel
Device: UL listed residential grade w/ copper terminals & brass ground
• Receptacle rating: 15 amp, 125V tamper resistant with ground (Article
406 of the NEC; requirements for Tamper Resistant receptacles in
dwellings)
• Assembly meets UL 514C scrub-water exclusion test requirement
 Fax: 1-800-237-7269
 Email: [email protected]
Installation Instructions
2
1
Floor Box Assemblies
3
FB-4 (Round with LV keystone provision)
FB-5 (2-gang with LV keystone provision)
New
Options!
Allied Moulded is now offering two new assemblies
to its extensive line of floor box products. The round
FB-4 is similar in design to Allied Moulded’s popular
FB-3 assembly, but includes a provision for adding
two industry standard low voltage keystone plugins.
The square FB-5 is a two-gang assembly featuring a
new decorative style device along with flip lid covers
and a provision for four industry standard low voltage
keystone plugins or a second device.
Find a location in between floor joists and Once measured, place the installation
template on the floor and cut a hole
measure the box dimensions according to
the template supplied in the installation accordingly. A small drill, jigsaw, or hole
saw can be used to precisely cut the
instruction sheet.
hole required.
4
5
Bring the electrical cable through the
preferred box clamp, and place the box
down in the hole and secure it with the
preferred mounting method. Wire the
device according to local electrical code.
Both assemblies are available in three cover finish
options including brass, dark bronze, and nickelplated brass.
Once the device has been wired, secure
Place the cover gasket on the box flange
the device and dust plate down into the box
and position the cover assembly over
using the screws supplied in the packaging. the gasket to ensure an adequate seal
between box and lid is met.
Secure the cover to the box with the
screws supplied in the packaging. Attach
all screw plugs and keystone plugs as
required.
Available Through:
222 North Union St.
Bryan, OH 43506
Phone: 800.722.2679
Fax: 800.237.7269
Industry standard LV keystone
plugins installed. Note: LV
plugins are not supplied with the
FB-4 assembly
FB-4 & FB-5
Floor Box Series Part Numbers
The FB-5 comes standard with
one decorative device and two
plates for installing an additional
device or up to 4 LV keystone
plugins, plus the required low
voltage box divider plate
Industry standard LV keystone
plugins installed. Low voltage
divider plate is factory installed
per code requirements. Note: LV
plugins are not supplied with the
FB-5 assembly
Designed in USA • Made in China
Cu. In.
Volume
Catalog
Number
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
19.5
FB-4*
Round box, brass cover, duplex device, 2 LV keystone openings,
screw plugs, flange and wing bracket mount
99072
6
12
19.5
FB-4DB
Round box, dark bronze cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99073
6
12
19.5
FB-4N
Round box, nickel-plated cover, duplex device, 2 LV keystone
openings, screw plugs, flange and wing bracket mount
99074
6
12
44.5
FB-5
Two-gang box, brass cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99075
6
14
44.5
FB-5DB
Two-gang box, dark bronze cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99076
6
14
44.5
FB-5N*
Two-gang box, nickel-plated cover, decorative style device, 4 LV
keystone openings, two flip lids, flange and wing bracket mount
99077
6
14
Component Description
*Represents picture shown
www.alliedmoulded.com
 Phone: 1-800-722-2679
FB-4
6
The FB-4 comes standard with
a duplex device and provision
for adding 2 standard LV
keystone plugins
Order Today!
FB-5
Floor Box Trifold 03/2015
 Fax: 1-800-237-7269
 Email: [email protected]
w w w. a l l i e d m o u l d e d . c o m
222 North Union Street
Bryan, OH 43506 USA
Phone: 1-800-722-2679
Fax: 1-800-237-7269