Victorian Bustle Day Dress Lesson 2 with Jennifer Rosbrugh www.HistoricalSewing.com Victorian Bustle Day Dress Lesson 2 Sewing the Foundation Skirt 3 Flatlining the Foundation Skirt 4 Setting in the Skirt Placket 6 Setting the Skirt onto the Waistband 8 Finishing the Skirt Hem 12 Foundation Skirt Trims 14 Homework Assignment 16 Page | 2 Sewing the Foundation Skirt Welcome to Lesson 2! Prepping and cutting your pattern IS sewing, but now we get to actually use the machine. The fabric cutting part always seems to take forever. But then once it's done, it's like the project is halfway finished! Follow the general sewing instructions included with your pattern. Watch the videos in this lesson for a full demonstration of those more complicated sections like setting in a placket, and achieving a well-made hem. Tips to Remember • • • • • • • All seam allowances are 1/2" (1.3cm). Press your center folds and other wrinkles in your fabric as you go along. Eventually they'll press out. Remember to press as you go! Press every seam flat first. Then press open or to the side. LET COOL before moving! Use a pressing ham or sleeve roll to press your skirt panel seams open. This helps prevent those ridges from showing through on the right side. Grade your seam allowances along the waist edge and at the hem before enclosing. http://historicalsewing.com/tutorials/how-to-grade-seam-allowances For the 1880s underskirt with back pouf area (or the 1870s underskirt if you happened to cut it with the pouf length), place safety pins at the pouf marks noted on the pattern before sewing. Sew skirt side seams from hem up to the waist. Page | 3 Flatlining the Foundation Skirt The Truly Victorian pattern instructions say nothing about lining or flatlining the foundation skirt. Sometimes your fashion fabric is sturdy enough on its own to not need an extra layer of support. But if you intend to make a tailored skirt or one with lots of trims mounted to it, you'll be happier by backing the fashion fabric. You can leave off the underlining IF you have two or more petticoats that can support your skirt. Of course, you know that I widely promote the wearing of petticoats. They not only help produce the silhouette you want but keep the skirts in place. In addition, to save the budget, you can make your underskirt out of a sturdy twill then flatline your delicate fashion fabric ON TOP of it at only the sections that will be seen. This is a historically correct technique. You'll often times see underskirts with their tan polished cotton lining on top with the silk taffeta mounted to just the hem sections. And the flatlined fabric doesn't have to match at each seam. It's only placed where it'll be seen when worn. Ah! What a lovely trick those Victorians used. This picture on the right is a side panel with the sheer stripe pinned to the top section. The white cotton underlining will be covered with ruffles. – No need to waste fabric when it'll be covered! Page | 4 We previously talked about what kinds of fabrics are good for underlining your skirt – twill for under a sheer, organdy, organza, poplin, etc. Now let's get to work flatlining them together. In flatlining, you cut both your fashion fabric and underlining exactly the same. Then you baste around the raw edges. From this point on you will treat each panel as a single piece. This is different than a traditional lining. In that method, you sew up the skirt lining separately and attach at the waist to the fashion fabric. The pieces stay separate and are usually hemmed separately. You'll find both ways in historical garments, but the flatlined skirt seems to show up more often. Remember to baste your long skirt panel edges from the hem up to the waist as shown in the video. No need to baste the hem or waist edges yet. Also, baste just inside the 1/2" seam line so you won't have to remove the basting stitches. However, the center back panel is so wide you'll want to baste the top edge as seen in this photo. For flatlining, I nearly always serge my long edges together. Obviously this is not a period technique. I like it because it finishes my raw edges at the same time. Basting the edges is perfectly fine. You should finish your raw edges somehow, either serge, pink, or machine or hand whipstitch. After flatlining, give the edges a quick press before continuing. Page | 5 Setting in the Skirt Placket A separately attached placket makes for a strong closure on a bustle skirt. You don't have to put in the placket and may not want to especially if you have a very sheer fashion fabric with no underlining. I find it easier to set in the placket first before sewing any other of the panel seams. Remember when sewing the placket, you want the placket piece on the back panel to stick out towards the front. The placket on the side back panel (front part) is turned under completely. The photo on the left shows the back placket piece pinned to the center back skirt panel. Notice the long edge is pressed under and trimmed to 1/4". This part will stick out away from the skirt. The photo on the right is the placket pinned to the side back skirt panel. This piece will turn completely to the inside. Page | 6 This is the finished placket as seen from the inside before the remaining side seam section is sewn. After your placket is in, sew the remaining panel seams. Press flat. Then press open over a seam roll, pressing ham or towel. Side Note Option: It is entirely possible to mount your overskirt onto your underskirt and apply one waistband to both making a single skirt. Making them separate garments, however, will allow you to mix & match with other skirts. If you want to make one skirt garment, you'll need to start your overskirt by cutting the panels and making the side pleats on the left hand side. (We'll cover the overskirt next week in Lesson 3.) Then you would match the left side back seams and apply the placket and waistband to both layers. This class will teach on making the underskirt and overskirt as separate garments, each with their own waistband. Page | 7 Setting the Skirt onto the Waistband Some skirt fabrics can be quite heavy or bulky. With these, and if your fabric is lightweight, you'll most likely want to interface/flatline the waistband. Options for this include sew-in interfacing, organza, organdy, your underlining fabric, or a pre-made waistband form. Fitting the Waist Before you get to sewing on the waistband, you'll want to fit the skirt waist. Try on the skirt over your undergarments, corset and bustle. Secure the center front hip line to your corset so it doesn't move. Also pin the Center Back/Side Back seam, at the hip, to your corset which will allow you to concentrate on only the front of the skirt. Pinch up darts a couple inches over from center front and in the center of the side back panels – wherever necessary to smooth the waist. Keep the hip area smooth. Pay attention to only bringing in the waistline to fit snug, but not too tight, around the waist. Remove the skirt carefully and sew up the darts, pressing the take up toward the centers. If you have a larger waist size, you may only need to run an ease or gathering stitch around the waist to fit your waist. Do whatever it takes to fit it to YOUR figure. Page | 8 Waistband Part 1 Prep your waistband as above and as shown in the video. Be sure to press one long side under 1/2" and trim back to 1/4" so it's all prepped. I love this shortcut as trying to press under the opposite seam allowance once the waistband is on the skirt is tricky. Start with applying the waistband to the fitted front, side fronts and side back skirt panels. Right sides together, pin the un-pressed edge of the waistband to the skirt starting at the placket opening. Leave 1/2" seam allowance sticking out away from the finished placket edge. Pin waistband to skirt until you reach the Center Back/Side Back seam. Stitch on. Waistband Part 2 Now it's time to pleat up the center back panel to fit whatever portion of waistband you have left. You may have only a few inches and that's ok. The back section is generally very full. Simply doing a traditional gather won't work – too many layers and too thick. Pleating is the best method. Page | 9 In the video I show finding the center point of the back and waistband then making a box pleat there. Then make outward facing knife pleats to take up the remaining fabric to match the waistband. Your pleats will probably overlap. Make them as even as you can for a quality dressmaking look. Stitch this center back section. Press the entire waistband seam. Grade allowances and press toward the waistband – press the waistband up. Finishing the Waistband & Closure To finish the ends, fold them right sides together and stitch the 1/2" seam, in line with the finished placket edge. Grade and turn the point out. Slipstitch the pressed edge of the waistband to the seam on the inside. Page | 10 To close your skirt, sew on skirt hooks & bars – one on the waistband and three to five along the placket. I find it easier to sew on all the hooks first then match up the opening, mark for the bars and stitch on. Page | 11 Finishing the Skirt Hem Bustle Era foundation skirts have a variety of hem treatments, some simple and others quite complicated and layered. For this class we'll cover the basic hem treatment. The patterns allow for a 1& 1/2" hem. If you made changes when prepping your pattern and cutting the fabric, use the new allowance here. I highly recommend a hem facing to finish your hem. It's a period technique and for good reason as it supports the hem and the entire skirt. In the video I show how to apply a purchased bias hem facing. Depending, of course, on your design and fabric, your hem facing can be of any width, but a 1 & 1/2" facing is a minimum width. If you need or want a deeper facing, cut bias strips from a polished cotton or your underlining fabric. Crinoline, horsehair, hymo cloth and organdy can all be applied under the hem facing for even more support. For more on hem facings, read this article: http://historicalsewing.com/finish-skirt-hems-support Skirt Hem Baste your fashion fabric and underlining together. Press up 1& 1/2". Mark a line 1" in from raw edge and trim so you are left with a 1/2" seam allowance. Page | 12 Open one edge of the hem facing and pin the fold to the 1/2" seam line. Sew in the fold. Press flat. Grade seam if needed. Press seam allowances and facing to inside. Hand slipstitch to the skirt. Page | 13 Foundation Skirt Trims Although you can find many existing bustle skirts and even tons of fashion plates & designs with little trim on the under skirts, but what would be a bustle dress that's plain? Even if you're not in to trim, a simple, deep, pleated ruffle along the hem can add amazing depth to your dress. Types of trim you can add to your skirt include: all kinds of ruffles -pleated or gathered; fabric strips – flat or pleated, or gathered into a ruche or puff (gathering at the top and bottom edges); braid trims on top of other trim or fabric; ribbons – pleated, gathered or stitched on flat. Also think about how to combine the above. A ruffle with a deep lace on top followed by a ribbon then a braid gives great Victorian depth to the trim. Add lace in ruffles, on top of ruffles or peeking out from under the hem. How to Calculate Ruffles and Where to Place Them on the Skirt: http://historicalsewing.com/how-to-calculate-yardagefor-ruffles http://historicalsewing.com/figuring-flounces-on1850s-skirts Page | 14 How to Calculate Pleats http://historicalsewing.com/techniques-for-easier-pleatingin-19th-century-costuming Where to Sew on Trim Match your lowest ruffle hem to the hem of your skirt or slightly above. Sew on multiple rows of ruffles either overlapping or spaced apart with about 1" to 2" of skirt seen in between. You can even curve your ruffles around the front like a smile on the skirt. Sewing on trims to the skirt will take some time. You might even get lazy here and stall. Depending on how much trim you are applying to your skirt, it may take you a while and even past the last week of class. We'll be moving straight into the overskirt next week (which generally has trims too) then onto the bodice. Keep working on it and you'll get it finished and be beautiful! If you feel you're starting to fall behind, or won't be able to finish the foundation skirt this week, leave off the trims for now and come back to them. Page | 15 Homework Assignment – Time to get to work 1. Cut your underskirt following the diagrams in the pattern instructions (if you haven't done so already). 2. Flatline the skirt panels 3. Set in the placket 4. Add a pocket if desired (bonus video) 5. Sew skirt panel seams 6. Set on the waistband and add hooks & bars for closure 7. Hem the skirt 8. Add trims – ruffles, puffs, ruches, braid, flat trims or fabric strips Videos in This Lesson Flatlining & Seams in the Underskirt Setting in a Skirt Placket Skirt Waistband, Part 1 Skirt Waistband, Part 2 Finishing the Skirt Hem Skirt Side Ties & Finishing Bonus: Skirt Pocket Happy Sewing! ~Jennifer Page | 16 LEGAL DISCLAIMER © 2013 by Jennifer Rosbrugh and HistoricalSewing.com. All rights reserved. The author and publisher of this sewing lesson and the accompanying materials have used their best efforts in preparing this lesson. No part of this lesson or the related files may be changed, sold, reproduced or transmitted in any form, by any means (electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher. However, you may print 1 copy for your personal use. The author and publisher disclaim any warranties (express or implied), merchantability, or fitness for any particular purpose. The author and publisher shall in no event be held liable to any party for any direct, indirect, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of this material, which is provided “as is”, and without warranties. The author and publisher make no representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the contents of this lesson. The information contained in this lesson is strictly for educational purposes. Therefore, if you wish to apply ideas contained in this lesson, you are taking full responsibility for your actions. This lesson identifies product names and services known to be trademarks, registered trademarks, or service marks of their respective holders. They are used throughout this lesson in an editorial fashion only. All links are for information purposes only and are not warranted for content, accuracy or any other implied or explicit purpose. Page | 17
© Copyright 2024