Inventors of Plasma Cutting
Air Plasma Cutting
LPH35, LPH50, LPH80, LPH120
LPH 35
8 mm MS/SS
LPH 50
12 mm MS/SS
The LPH 35 is designed for cutting of plates up to 8 mm
thick. The front panel allows selection of cutting current of
20A or 35A to suit the power requirements of cutting
conditions. The LPH 35 comes equipped with PT 30KK, an
air-cooled torch having 4.0 m hose package.
The LPH 50 is designed for cutting of plates up to 12mm
thick. The front panel allows selection of cutting current of
30A or 50A to suit the power requirements of cutting
conditions. The LPH 50 comes equipped with PT 27, an aircooled torch having 7.6 m hose package.
LPH 80
LPH 120
25 mm MS/SS
The LPH 80 is designed for cutting of plates up to 25 mm
thick. The front panel allows selection of cutting current of
40A or 60A or 80 A to suit the power requirements of cutting
conditions. The LPH 80 comes equipped with PT 27, an
air-cooled torch having 7.6 m house package.
35 mm MS/SS
The LPH 120 is designed for cutting of plates up to 35 mm
thick. The front panel allows selection of cutting current of
6A or 90A or 120A to suit the power requirements of cutting
conditions. The LPH 120 comes equipped with PT 25, an
air-cooled torch having 7.6m hose package.
Technical data:
LPH 35
LPH 50
LPH 80
LPH 120
Main supply
Fuse slow
Rated power
V/Hz
A
KVA
3 x 415 / 50
16
11
3 x 415 / 50
25
16.5
3 x 415 / 50
32
20
3 x 415 / 50
50
30
Max output
At 35% duty cycle
At 60% duty cycle
At 100% duty cycle
Open circuit voltage
Pressure bar
Air Supply
Cooling air
Enclosure class
Weight kg
Dimensions L x W x H
A
A
A
V
Bar
L/min
L/min
Kg
mm
35
20
295
3.5-7
8/12*
IP 23
52
610x255x515
50
30
320
4.5-7
12/15*
IP 23
89
680x325x515
80
60 & 40
310
4.5-7
25/35*
IP 23
131
760x390x845
120
90 & 60
310
4.9-7
132-170
35/45*
IP 23
167
760x390x845
* Quality cut / severing
Ordering Information
LPH 35 with PT 30 KK-4M
46F0303035
LPH 50 with PT 27-7.6M
46F0301050
LPH 80 with PT 27-7.6M
46F0301080
LPH 120 with PT 27-7.6M
46F0304120
LPH cut speed data
PT-27
Cut Speed Data
PT-25
PT-30KK Cut Speed Data
Cut Speed Data
200
203
153
102
51
350
300
250
200
Carbon
Aluminium
Stainless Steel
150
10050
Cutting Speed (Cm/min.)
400
254
Cutting Speed (Cm/min.)
Cutting speed (cm/min)
305
150
100
35A
50
0
6.3
9.5
12.7
15.9
19
25.4
31.8
0
6
Thickness (mm)
13
19
25
32
Thickness (mm)
38
44
0
0
50
3
6
9
12
Thickness (mm)
LPH is suitable for AI, SS and also for Carbon steel
because
· Faster and economical on AI, SS, Carbon steel below 12mm
· Cutting starts from 0.1mm onwards unlike 6mm of flame cutting
· Very safe and convenient on any application
· No distortion even on sheets below 6mm
· Savings on storage and maintenance of gases
· Better quality of cuts
· Easy to adapt and lesser skill requirements
· No naked flames
· Circle and profile cutting accessories
· Light weight torches makes cutting effortless
ESAB INDIA LIMITED
Equipment Factories
Eastern Regional Office
Western Regional Office
P41 Taratala Road
Kolkata 700088
Tel. +91-33-2401 9611
Fax +91-33-2401 9671
Email [email protected]
501/502, Sagar Techn Plaza-B
5th Floor, Andheri Kurla Road
Saki-Naka Andheri East
Mumbai 400072
Tel. +91-22-2851 7386/6742/6724
Fax +91-22-2852 4974
Southern Regional Office
Northern Regional Office
Karumuttu Centre, 6th Floor
71/1 Najafgarh Road
New No. 634 (Old no. 498)
New Delhi 110015
Anna Salai, Nandanam
Tel. +91-11-4142 7090-8
Chennai 600035
Fax +91-11-4142 7099
Tel. +91-44-4204 0294/95
Email [email protected]
Fax +91-44-4204 0289
Email [email protected] Email [email protected]
www.esabindia.com
Central Regional Office
No.218, Ashirwad,
South Ambazari Road
Bajaj Nagar, Nagpur 440010
Tel. +91-712-2229547/48
Fax +91-712-2229549
Email [email protected]
Repro Digital 08-2006
P41 Taratala Road, Kolkata 700088, Tel. (033) 2401 4517-19, Fax (033) 2401 1880
SIPCOT Industrial Park, Irungattukottai, Pennalur (Post), Sriperumbudur Taluk, Tamil Nadu, Tel. (044) 4319 2043/44, Fax (044) 4319 2049
Email : [email protected]