Comfort
Vendor Code: COM
Premium Protective Products
Thumb Types
Straight Thumb
Design that points vertically from the
wrist and useful in those areas where
gripping is important.
Wing Thumb
An angled thumb that allows good
flexibility. Contains no seam between palm and thumb area.
Keystone Thumb
Highly flexible thumb that is stitched
separately into the palm area, usually
with an extra layer of leather.
Cuff Styles
Knit Wrist
Found on most woven and knit cotton
gloves. Comfortable, snug fit that keeps
dirt out of gloves.
Safety Cuff
Can easily be shaken off without using
the other hand-a safety precaution. Its
main purpose is to provide protection
to the wrist area.
Premium Protective Products
Comfort® gloves are quality, heavy duty products.
The tough but flexible materials offer exceptional
hand protection and superior performance against
cuts, abrasions and temperature extremes. Comfort®
offers a wide variety of premium gloves to meet
specific applications on the job site.
Goatskin Superiority
Turned Cuff
Leather edge of cuff is turned up inside
glove and hemmed to provide extra
wear and comfort.
Shirred Cuff
Used where easy on and off applications
are required. A shirring closure across
the back of the lower wrist area is used
to hold the glove snugly on the hand.
Gauntlet Cuff
• L anolin oil is naturally present in goatskin. Our
unique tanning gives you a supersoft glove that
increases comfort while reducing hand fatigue.
• Naturally soft leather means dexterity, tactility,
and close touch for those sensitive jobs, such
as TIG welding.
• Goatskin durability is renowned! Independent lab
tests show that when compared to cow and pig
glove leather, goatskin is at least twice as durable
than both before abrasion, three times more
durable than pig after abrasion, and 10 times
more durable than cow after abrasion.
• Tests performed by an independent lab using
80 grit sandpaper after 1600 abrasion cycles.
Leather Terminology
Side Split- The portion of the hide that covers the rib
area of the animal. Stronger and more uniform than
shoulder leather with fewer imperfections such as
scars and weak fibers.
Shoulder Split- The portion of the hide from the
neck and shoulder of the animal. Fibers tend to be
weaker than side split.
A longer cuff typically at least 4" long
which protects the wrist and forearm.
Belly Split- Comes from the belly portion; it is
the least dense and most economical.
Hand Protection
Glove Pattern
Gunn Cut
Pattern includes a seam across the base
of two middle fingers on palm side.
Clute Cut
Identified by the absence of a seam
across the base of two middle fingers
on palm side.
Grain Leather- Top portion of the hide, smooth,
soft and flexible. Used primarily when dexterity
is required.
Materials
Cowhide- Offers maximum protection under the
most rugged conditions.
Goatskin- The natural presence of lanolin in goatskin
makes it supersoft and flexible. The pliable goat
leather creates dexterity and increased durability.
Sheepskin- Soft, durable leather which provides
comfort in needs of dexterity and sensitivity.
17
Cottons- Usually knitted or woven fabrics. They
provide comfort wear for light to medium duty
work. Woven fabrics offer better abrasion resistance
and barrier protection against grime. Jersey fabric
stretches to fit the hand.
* Designs and/or specifications of gloves are subject to
change without notice.
726
Comfort
Vendor Code: COM
Leather Palm, Cowhide & Goat Work Gloves
Leather Palm Work Gloves
• Q
uality shoulder/ belly
split cowhide.
• Starched safety cuff.
Part No. 1210: L
• Select shoulder split cowhide.
• Plasticized safety cuff.
Part No. 1220: L
• Select shoulder split cowhide.
• 2.5" rubberized safety cuff.
Part No. 1230: L
• P
remium side split
brown cowhide.
• Yellow fabric back.
• Heavy safety cuff.
Part No. 1610: L
• Premium side split cowhide.
• Side split reinforced palm
and finger.
• Heavy safety cuff.
Part No. 1421: L
Available in Economy Patch Palm.
Part No. 1201: L
• Premium side split cowhide.
• Heavy safety cuff.
Part No. 1420: L
Hand Protection
Work Gloves
17
• Winter work glove.
• Premium side split cowhide.
• Fully thermo-lined including cuff.
• Superior warmth and comfort.
• Fabric back.
• Heavy safety cuff.
Part No. 1242: L, XL
• Premium goat grain leather.
• Heavy safety cuff.
Part No. 1910T: L
• Premium leather palm.
• Side split cowhide.
• P.E. safety cuff.
• Full leather back.
• Gunn pattern.
• Wing thumb
Part No. 1243: L
• Full leather back work glove.
• Heavy select side split
cow leather.
• Sewn with super-strong heat
resistant Kevlar® thread.
Part No. 1717: XL
727
Comfort
Vendor Code: COM
Cotton, Logo,& Driver’s Gloves
Cotton Gloves
• 100% lightweight cotton.
• Unhemmed.
• One size fits all.
Part No. 4100
Logo Gloves
• Premium brown jersey glove.
• Knit wrist protection.
• Multi-purpose glove.
• Heavy duty.
• One size fits all.
Part No. 5001
• Plastic dot glove.
• Knit wrist protection.
• Cotton canvas.
• Superior grip.
Part No. 5120: L
• S
pecify which color and logo per dozen
gloves ordered.
• Dodge®, Ford®, Chevrolet®,
Professional Bull Riders™, John Deere®,
Nascar®, NFL™, and NCAA® all available.
• One size fits all.
• Factory drop ship only.
Part No. WA0022
Drivers Gloves
• Quality side split cowhide.
• Unlined.
Part No. 2010: S, M, L, XL
Hand Protection
• Pig grain.
• Heatrac® insulated.
• Keystone thumb.
Part No. 1366: XL
17
• Premium shock absorbent
goat grain leather.
• Reinforced suede goatskin palm.
• Unlined.
Part No. 2040T: S, M, L, XL
728
• Premium goat grain leather.
• Unlined.
Part No. 2030T: S, M, XL
• Premium goat grain leather.
• Select shoulder split cowhide.
• One piece back.
• Unlined.
Part No. 2020T: M, L, XL
Comfort
Vendor Code: COM
High Temperature Gloves / Mittens
High Temperature Gloves & Mitten
• 14" Clute cut jumbo size heat glove.
• Wool/felt lined.
• Wing thumb.
• Treated fiberglass material.
Part No. 925-15
• 14" Clute cut glove.
• Leather reinforced palm & thumb.
• Wool/felt lined.
• Wing thumb.
• Treated fiberglass material.
Part No. 925-17
Same as 925-15 (above) constructed
with a blended Kevlar® fabric.
Part No. 960-15
• 14" length reversible mitten.
• Provides “double wear” life.
• Wool/felt lined.
• Treated fiberglass material.
Part No. 925-13
• 1 4" Gunn cut fully welted glove.
• 100% wool lined to wrist.
• Aluminized leather, one-piece
back.
• Wing thumb.
• Protects against
reflected heat.
Part No. 925-72
• Kevlar® brand fiber.
• Cotton inside.
• 7-gauge knit with palm coat.
Part No. 9368: S, L
Hand Protection
17
729
Comfort
Vendor Code: COM
Premium Hot Mill & Welding Gloves
Premium Hot Mill Gloves
• 24 oz.
• Band top.
• Nap out.
• 2" cuff.
Part No. 6210: L
• Gauntlet cuff.
• 24 oz.
• Nap out.
• 4.5" cuff.
Part No. 6220: L
• Band top.
• Burlap lined.
• 32 oz.
• Heavy duty.
• Nap out.
• 2" cuff.
Part No. 6230: L
• Gauntlet cuff.
• Burlap lined.
• 32 oz.
• Heavy duty.
• Nap out.
• 4.5" cuff.
Part No. 6240: L
Welding Gloves
• Rust, 18" cowhide,
sewn with Kevlar®.
• Protects forearm to elbow.
• Reinforced palm, Velcro® strap cuff.
• Airfoam® insulated back.
Part No. 1468
• Split cow welder gloves.
• Select shoulder leather.
• Sewn with Kevlar®.
• Reinforced straight thumb.
• Black cotton drill cuff lining.
Part No. 4320
• G
ray quality shoulder/ belly
split cowhide.
• Full Fleece palm lining.
Part No. 4910B: L
remium shoulder brown
• P
split cowhide.
• Reinforced thumb strap
protection.
• Sewn with Kevlar®.
• Full palm lining
with foam back.
• Heavy duty.
Part No. 4930T: L
• Side split cowhide.
• Reinforced thumb guard and
strap protection.
• Sewn with Kevlar™.
• Gunn pattern.
• Wing thumb.
• Fully welted, turned cuff.
• Extra heavy duty foam and
fleece lining.
Part No. 4970T
Hand Protection
• Blue shoulder split cowhide.
• Reinforced palm.
• Fully welted finger tips.
• Complete sock lined.
Part No. 1413T
17
730
Comfort, Wilson
Vendor Code: COM, WSC
Welding Gloves / Back Hand Pads
Welding Gloves
• 14" Gunn cut welding glove.
• Continuous one piece back.
• Synthetic lining.
• Fully welted.
• Wing thumb and turned cuff.
Part No. 920-10
•
•
•
•
13" Gunn cut glove.
Continuous one piece back.
Synthetic lining.
Thumb, index finger and
outside seam welted.
• Wing thumb and turned cuff.
Part No. 920-11
• C
lute cut, flame retardant
terry cloth glove.
• Designed specifically for
welders.
• Protects against heat, cuts
and abrasions.
Part No. 920-20
• Ladies welding glove.
• Blue 12" Gunn cut.
• Synthetic lining.
• Fully welted.
• Wing thumb and turned cuff.
Part No. 920-24
• 14" Clute cut welding glove.
• Continuous one piece back.
• 100% wool lined to wrist.
• Fully welted.
• Wing thumb and turned cuff.
Part No. 920-5
• 13" Gunn cut welding glove.
• Continuous one piece back.
• Synthetic lining.
• Thumb and index finger welted.
• Wing thumb and turned cuff.
Part No. 920-60
•
•
•
• Black 14" Gunn cut glove.
• Aluminized leather one-piece
back and thumb to protect
against direct and reflected
heat.
• Cowhide palm, fully welted.
• Wing thumb and turned cuff.
Part No. 925-70
Hand Protection
Glove Accessories
lue 14" Gunn cut
B
welding glove.
Continuous one piece back.
Synthetic lining with fully welted
lock stitch construction.
• Wing thumb and turned cuff.
Part No. 921-5
WILSON* Aluminized
Weld-O-Glass Back Hand Pad
17
Protects the back of welder’s glove from weld spatter and high radiant
heat. Increases the life of your glove. Helps you to weld longer when
exposed to high radiant heat. Provides good mobility for gloved hand.
Double layer protection—Wilson Weld-O-Glass 2600 AMA on top and a
high temperature glass fabric on the bottom. Sewn and riveted for
added durability.
Part No. BHP06
Back Hand Pads
• P
rotects the back of welder’s glove from
weld spatter and high radiant heat.
• Increases the life of your glove.
• Helps you to weld longer when exposed
to high radiant heat.
Part No. 920-75- Single layer protection
Part No. 920-85- Double layer protection
731
Comfort
Vendor Code: COM
MIG/TIG Gloves
MIG / TIG Gloves
• Premium goat grain leather.
• Premium select shoulder split
cowhide safety cuff.
• Straight thumb.
• Clute cut.
Part No. 4510: M, L, XL
Hand Protection
• Premium goat grain leather.
• Premium shoulder split
cowhide gauntlet cuff.
• Sewn with Kevlar®.
• Wing thumb.
• Turned cuff.
• Heavy duty.
• Gunn cut.
Part No. 4570T: S, M, XL
• Extremely soft suede.
• Premium select shoulder split
cowhide safety cuff.
• Sewn with Kevlar®.
• Straight thumb.
• Gunn cut.
Part No. 4520T: M, L, XL
• Premium goat grain leather.
• Premium select shoulder split
cowhide safety cuff.
• Sewn with Kevlar®.
• Straight thumb.
• Gunn cut.
Part No. 4560T: S, M, L, XL
• Premium sheep leather.
• Premium shoulder split
cowhide gauntlet cuff.
• Sewn with Kevlar®.
• Wing thumb.
• Turned cuff.
• Heavy duty.
• Gunn cut.
Part No. 4580T: M, L
TIG Gloves
17
• Gunn cut TIG welding glove.
• Made from full grain, light
weight pigskin.
• 4" cuff, straight thumb.
• Unlined.
Part No. 920-16
732
• Gunn cut TIG welding glove.
• Light weight, soft, pliable.
• Cork colored deerskin.
• Wing thumb.
• Unlined.
Part No. 920-17: S, M, L, XL
• Gunn cut TIG welding glove.
• Pearl grain sheepskin palm and
straight thumb.
• Buck tan cowhide back and
2-1/2" buck tan cuff.
• Unlined.
Part No. 920-18
Part No. 920-18LHO - left hand only
• Gunn cut TIG welding glove.
• Light weight, extra soft,
pliable.
• Pearl Cape-skin leather.
• Wing thumb.
• Unlined.
Part No. 920-19: S, M, L, XL
Caiman
Vendor Code: CAI
Welder’s Gloves
Exclusive features of Revolution® & Kontour™
All
Others
Kontour™ offers
Exclusive 3-Dimensional,
Pre-Curved Fingers, and
Form-Fitting Design for
Ultimate Fit, Comfort &
Dexterity.
Caiman®
Kontour™ Cut
Discomfort
Zone
Caiman® is the first in it’s industry to apply such a design
to a welding glove. The Kontour™ design conforms to the
natural contour of the human hand and provides proper
finger alignment to achieve unprecedented comfort and
dexterity no other welding glove has ever done before.
Where most welding
gloves are cut straight
across the palm, Kontour™
matches the natural
crease line of your palm.
Patches, Padding and
Reinforcements for
Comfort & Protection
Complimentary 3" Carabineer
for Sturdy & Attractive Retail
Display & to Keep Gloves
Together with Exclusive
Caiman® Loops on Each Pair
Revolution® Series
Genuine American Deerskin Revolution®
Pigskin Heat Shield Revolution®
• Double layered protection features Lean-On and
Heat-Shield Reinforcements on the left hand.
• Insulated with FR (flame resistant) cotton fleece
in sock lining.
• Sewn with Kevlar® thread.
Part No. 1812: M, L, XL
Deerskin Revolution®
• Made of Genuine American Deerskin.
• Super supple deer suede palm with double
stitched padding and wear-patch.
• Large pulse protector.
• Full sock-insulation with FR (flame resistant)
foam/fleece.
• Sewn with Kevlar® thread.
Part No. 1816: L, XL
Hand Protection
• Genuine Amercan Deer grain leather palm with
double stitched padding and wear-patch.
• Large pulse protector.
• Deer split leather back insulated with HeatFlect™
aluminized film.
• Full sock-insulation with FR (flame resistant)
foam/fleece.
• Sewn with Kevlar® thread.
Part No. 1814: L, XL
17
Top Grain Cowhide MIG/Multi-Task
Revolution®
• Unlined, padded and reinforced palm for added
protection and comfort.
• Top grain leather forchettes and finger tips.
• Two-layer insulated back for protection from
radiant heat.
• Large pulse protector.
• Sewn with Kevlar® thread.
Part No. 1810: L, XL
Top Grain Cowhide Multi-Task Revolution® Goatskin Revolution® MIG/TIG
• Unlined, padded and reinforced palm and thumb
saddle for added protection and comfort.
• Top grain leather forchettes and finger tips.
• Sewn with Kevlar® thread.
Part No. 1828: M, L, XL
• Extra durable top grain goatskin for unmatched
durability and dexterity with lighter weight.
• Excellent all-around glove for MIG/TIG welding,
plasma cutting, material handling or just
backyard chores.
• Unlined, padded and reinforced palm & thumb
saddle for added protection and comfort.
• Flame Resistant insulated back.
• Top grain finger tips and fourchettes.
• Large pulse protector and long leather cuff.
• Sewn with Kevlar® thread.
Part No. 1868: S - XL
733
Caiman
Vendor Code: CAI
Welders Gloves
Black Gold Revolution® I
• Genuine American Deerskin tanned
in U.S.A.
• Exclusive Boarhide™ wraparound index
trigger patch, palm and lean-on patch.
• Exclusive Caiman® Cool-Design
utilizes corrugated foam and perforated
leather to disperse heat off the back
of the hand.
• Exclusive Caiman® reverse-scalloped
Tuff-Steer™ cuff for protection against
sparks and spatter.
• Reinforced thumb saddle for extended
durability.
• Sewn with Kevlar® thread.
Part No. 1830: L, XL
Black Gold Revolution® II
• Premium Cow Grain Leather.
• Exclusive Boarhide™ wraparound index
trigger patch, palm and lean-on patch.
• Exclusive Caiman® Cool-Design utilizes
corrugated foam and perforated leather
to disperse heat off the back of the hand.
• Exclusive Caiman® reverse-scalloped
Tuff-Steer™ cuff for protection against
sparks and spatter.
• Reinforced thumb saddle for extended
durability.
• Sewn with Kevlar® thread.
Part No. 1832: L, XL
Kontour™ Series
Hand Protection
Genuine American Elk Skin, Unlined
17
• Made of Genuine Wild American Elk skin.
• Elk skin offers unmatched combination of
durability (literally wears like iron), safety,
and comfort.
• Unlined reverse grain palm for dexterity
and comfort.
• Thumb reinforcement strap, pulse protector.
• Naturally, wool provides superior
insulation, flame
resistance and moisture wicking
characteristics.
• Completely welted seams.
• Sewn with Kevlar® thread.
Part No. 1858: M, L, XL
Heavy-Duty Genuine American Deer Grain
• Made of Heavy Genuine American Deerskin.
• Insulated genuine deer grain back for extra
protection from radiant heat.
• Unlined, reverse grain leather palm.
• Reinforced palm & pulse protector for
max wear and protection.
• Sewn with Kevlar® thread.
Part No. 1485: M, L, XL
734
Genuine American Deerskin Multi-Task
• Super supple Genuine American Deerskin
tanned in U.S.A.
• Exclusive reverse-scalloped Boarhide™ cuff
for protection against sparks and spatter.
• Reinforced thumb saddle for extended
durability.
• Boarhide™ palm patch for extended
wear and protection.
• Unlined & padded palm with wool
insulated back.
• Deerskin pulse protector for added safety.
• Sewn with Kevlar® thread.
Part No. 1870: S, M, L, XL
Mega-Long 21" Genuine American
Deerskin Welders
• Industry First! - 21" glove
with heavy duty padding on
the forearm and elbow
for comfort.
• Genuine American Deerskin
tanned in U.S.A.
• Boarhide™ leather heat shield patch,
reinforced palm, cuff and lean-on patch.
• Perforated Boarhide™ leather on the
forearm for breathability.
• Sock-lined FR cotton fleece insulated.
• Sewn with Kevlar® thread.
Part No. 1878: one size
21" Mega
Long Cuff
Caiman
Vendor Code: CAI
Insulated Gloves / Insulated Work Gloves
Leather outer Shell provides durable wear
Exclusive features of Caiman Insulated Gloves
•
•
and protection from wind and abrasion.
Heatrac® micro-fiber insulation for ultimate warmth
& comfort in harsh conditions.
G-Grip™ patches strategically placed for
max grip & wear.
HEATRAC® (multi-layered micro-fiber) has
millions of air pockets for efficient insulation.
Brushed Polyester provides soft feel and an
additional layer of insulation with moisture wicking
action to keep hands dry and warm.
Insulated Gloves
Arctic Trekker II
• Heavy duty, luxurious genuine American
Whitetail deer split leather palm.
• Water resistant liner on the palm, fingers
& sidewalls.
• Knit wrist cuff for comfort, warmth & fit.
• Comes with FREE pair of Acrylic/Spandex
knitted gloves.
• Heatrac® micro-fiber insulation for ultimate
warmth & comfort in harsh winter conditions.
• G-Grip™ patches strategically placed for
max grip & wear.
Part No. 1962: M - 2XL
Heatrac™ II Insulated, Fleece Back Gloves
• Soft & supple genuine American Whitetail
deer split leather palm, charcoal fleece back.
• Heatrac® II micro-fiber insulation.
• Sock-lining construction; glove inside
of a glove.
• Heavy fleece back.
• Shirred elastic all the way around the
wrist for snug fit.
Part No. 1395: 4XS - 2XL
Hand Protection
Insulated Work Gloves
17
Pigskin Leather Palm Insulated
• Premium Pig grain leather.
• Heatrac® micro-fiber insulation.
• Sock-lining construction; glove inside
of a glove.
• Combo cuff.
Part No. 1362: S - XL
All Leather Shell, Heatrac® Insulated
• Brushed pig grain leather.
• Heatrac® micro-fiber insulation.
• Sock-lining construction; glove inside of a glove.
• Slip-on style.
Part No. 1368: S - XL
Hi-Viz Pigskin Leather Palm Insulated
• Brushed Pigskin leather.
• 3M Scotchlite™.
• Heatrac® micro-fiber insulation.
• Combo cuff.
Part No. 1391: S - 2XL
735
Caiman
Vendor Code: CAI
Mechanics Gloves
All M.A.G.™ Series gloves are made with these exclusive features!
Exclusive Caiman®
raised pull patch &
pulse protector
AirMeshTM ultrabreathable back
provides ultimate
comfort & support
Pinch’d-TipTM
fingers for
maximum
sensitivity
Neoprene knuckles
protection with
reflective trim
Neoprene cuff with
Velcro® pull strap for
comfort and wrist
support
M.A.G™ Series
Hand Protection
2970
• Heavy Genuine American deer
split leather.
• Champion of comfort and durability.
• Truly Washable leather, Dries soft.
• Internal padded palm for extra
comfort and snug fit.
Part No. 2970: XS - XXL
2971
• Heavy Genuine American black
deer split leather.
• Champion of comfort and durability.
• Truly Washable leather, Dries soft.
• Internal padded palm for extra
comfort and snug fit.
Part No. 2971: S - XXL
2972
• Heavy Genuine American black
deer grain leather.
• Champion of comfort and durability.
• Internal padded palm for extra
comfort and snug fit.
Part No. 2972: XS - XXL
2955
• Genuine goat grain leather,
white color.
• Internal padded palm for
extra comfort and snug fit.
Part No. 2955: S - XXL
Fingerless
Design
17
2956
• Genuine pig grain leather.
• Padded G-Grip™ patches
strategically placed on palm
and finger tips for max grip
& wear.
Part No. 2956: S - XXL
736
2959
• Max-Dex™ fingerless design with
pull tabs.
• Rhino-Tex™ synthetic leather palm.
• G-Grip™ patches strategically
placed for max grip & wear.
• Heavy padded palm for vibration
and shock protection.
Part No. 2959: S - XXL
2950
• Rhino-Tex™ synthetic leather palm.
• Padded G-Grip™ patches
strategically placed for max grip
& wear.
Part No. 2950: S - XXL
2952
• Reflective, highly abrasion
resistant Armortex® knuckle
protection.
• Molded knuckle protector for
additional impact protection.
• Lightweight yet durable
Rhino-Tex™ synthetic leather.
• Heavy padded palm for vibration
& shock protection G-Grip™
palm patches for extra grip &
extended wear.
Part No. 2952: S - XXL
Caiman, Kimberly-Clark
Vendor Code: CAI, KCP
Mechanics Gloves
M.A.G™ Series
2951
• Silicone pattern on Rhino-Tex™ synthetic
leather ensures an effortless & secure grip.
• Internal padded palm for extra comfort
and snug fit.
Part No. 2951: S - XXL
2981
2980
• Reflective tape on knuckle area and finger tips.
• Hi-Viz lime green back for maximum exposure.
• Genuine American deer split leather.
• Internal padded palm for extra comfort
and snug fit.
Part No. 2981: XS - XXL
• Hi-Viz lime green back for
maximum exposure.
• Genuine goat grain leather, white color.
• Internal padded palm for extra
comfort and snug fit.
Part No. 2980: S - XXL
KLEENGUARD* G10
Grey Nitrile Gloves
KLEENGUARD* G10
Arctic Blue Nitrile Gloves
KLEENGUARD* G10
Blue Nitrile Gloves
• Textured fingertips.
• 3.5 mil thickness improves
tactical sensitivity.
• 50% more gloves per case.
• Approval for food handling.
• Latex-free and powder-free.
• 9.5" length.
Part No. 97821- Small, 150 gloves/pk
Part No. 97822- Medium, 150 gloves/pk
Part No. 97823- Large, 150 gloves/pk
Part No. 97824- X-Large, 140 gloves/pk
• Textured fingertips.
• Powder-free to minimize the
drying effects of powder on skin.
• 100% more gloves per case.
• Approval for food handling.
• Latex-free and powder-free.
• 9.5" length.
Part No. 90096- Small, 200 gloves/pk
Part No. 90097- Medium, 200 gloves/pk
Part No. 90098- Large, 200 gloves/pk
Part No. 90099- X-Large, 180 gloves/pk
•
•
•
•
•
JACKSON SAFETY* G40
Polyurethane Coated Gloves
JACKSON SAFETY* G40
Latex Coated Glove
JACKSON SAFETY* G40 PURPLE NITRILE*
Foam Coated Gloves
• Excellent dexterity and grip.
• Hides dirt.
• Thin-mil feel for tactical sensitivity.
• Abrasion and tear resistant.
Part No. 98220- Size 7, 12/pk
Part No. 98221- Size 8, 12/pk
Part No. 98222- Size 9, 12/pk
Part No. 98223- Size 10, 12/pk
Part No. 98224- Size 11, 12/pk
Designed for excellent durability in the work
environment, these general purpose poly-cotton
latex coated gloves are processed to yield lower
latex proteins. An excellent
value, they offer good grip as well
as great comfort and dexterity.
Great for masonry applications.
Part No. 97270- Size 7, 12/pk
Part No. 97271- Size 8, 12/pk
Part No. 97272- Size 9, 12/pk
Part No. 97273- Size 10, 12/pk
Part No. 97274- Size 11, 12/pk
• Seamless knit nylon liner for comfort.
• Abrasion resistance rating of
4 out of 4 (EN Standards).
• Excellent grip even through oil and dirt.
• Black & purple color hides oil and dirt.
• 25% better productivity than leather.
• Static Dissipative.
Part No. 40225- Size 7, 12/pk
Part No. 40226- Size 8, 12/pk
Part No. 40227- Size 9, 12/pk
Part No. 40228- Size 10, 12/pk
Part No. 40229- Size 11, 12/pk
• Breathable material between
fingers for greater comfort.
• Five finger protection.
• Reinforced knuckle protection.
Part No. 90261- Size 7, 12/pk
Part No. 90262- Size 8, 12/pk
Part No. 90263- Size 9, 12/pk
Part No. 90264- Size 10, 12/pk
Part No. 90265- Size 11, 12/pk
Part No. 57371- Small, 100 gloves/pk
Part No. 57372- Medium,100 gloves/pk
Part No. 57373- Large, 100 gloves/pk
Part No. 57374- X-Large, 90 gloves/pk
Hand Protection
JACKSON SAFETY* G50 Mechanics Utility Gloves
Textured fingertips.
Latex-free.
Approved for food handling.
6 mil thickness.
9.5" length.
17
JACKSON SAFETY*
G50 Mechanics with Palm
and Finger Protection Gloves
Part No. 90266- Size 7, 12/pk
Part No. 90267- Size 8, 12/pk
Part No. 90268- Size 9, 12/pk
Part No. 90269- Size 10, 12/pk
Part No. 90270- Size 11, 12/pk
737
Jackson / Kimberly-Clark, Sperian
Vendor Code: KCP, PER
Hand Protection
JACKSON SAFETY* G60 PURPLE NITRILE*
Cut Resistant Gloves
JACKSON SAFETY* G60 Level 2
Nitrile Coated Cut Glove
• Tapered coating on the fingertips provides added durability
without sacrificing dexterity.
• For industrial employees who need protection against hand cuts.
• ANSI Level 3 cut resistance, 1150g CPPT.
• Provide a high level of cut resistance.
• Sewn-in tag reduces risk of label flaking off in-use.
• Ambidextrous design improves cost-in-use.
• Breathable with a flexible dotted palm for better grip.
• Made of DYNEEMA® fabric, the “world’s strongest fiber”.
Part No. 97430- Size 7, 12/pk
Part No. 97431- Size 8, 12/pk
Part No. 97432- Size 9, 12/pk
Part No. 97433- Size 10, 12/pk
Part No. 97434- Size 11, 12/pk
• ANSI/EN 388 Level 2 Cut Resistance.
• Stretch KEVLAR® liner provides cut resistance
and a comfortable fit.
• ACTIFRESH® antimicrobial treatment inhibits
bacteria growth, thereby extending wear and
improving cost-in-use.
• Excellent dexterity for improved productivity.
• Nitrile coating enhances grip in light oil applications.
• Dark coating hides dirt for longer wear.
Part No. 98230- Size 7, 12/pk
Part No. 98231- Size 8, 12/pk
Part No. 98232- Size 9, 12/pk
Part No. 98233- Size 10, 12/pk
Part No. 98234- Size 11, 12/pk
Perfect-Coat™
Junk Yard Dog®
Hand Protection
Natural rubber palm and fingertip coating. Also available with nitrile
palm coating for excellent cut, slash, snag, puncture and abrasion
resistance and for grip in oily applications.
• 10 cut, medium weight gray
cotton/polyester shell.
• Blue natural rubber* palm
and fingertip coating.
Part No. 300PC-S
Part No. 300PC-M
Part No. 300PC-L
Part No. 300PC-XL
* This product contains natural rubber/latex which may cause allergies in some individuals. These
allergies can lead to serious illness or death. If an allergic reaction occurs (skin rashes, hives, flushing,
itching, nasal, eye, or sinus symptoms, shortness of breath, asthma or shock), stop using this product
immediately and consult a medical provider.
17
738
Exceptional cut, slash and abrasion resistance for the toughest industrial
applications. 100% Kevlar® shell is five times stronger than steel on an
equal weight basis.
• 7 cut, standard weight.
• 100% Kevlar®.
• Full premium leather palm.
• Reinforced thumb crotch.
Part No. KV18A-100-50- Mens
Part No. KV18AL-100-50- Ladies
Part No. KV18AJ-100-50- Jumbo