1. No category

TECHNICAL PROGRAMME: BTTD 2015
Oral Presentations
P.No
Hours
Authors
Affiliation
Paper Title
SESSION -IA: Materials Processing and Characterization - I (11.30-13.30 hrs) Venue: NML Auditorium
TP-1
11:30 hrs
TP-2
11:42 hrs
TP-3
11:54 hrs
TP-4
12:06 hrs
TP-5
12:18 hrs
TP-6
12:30 hrs
TP-7
TP-8
12:42 hrs
12:54 hrs
TP-9
13:06 hrs
TP-10
13:18 hrs
TP-11
14:30 hrs
TP-12
14:42 hrs
TP-13
14:54 hrs
Santosh Kumar, Ashish Kumar, NML
Rajneesh kumar
Jamshedpur
Akash Kumar Soni, Gaurav OPJIT Raigarh
Sahu, Himanshu Shrivas
Manish Kumar Jha, Bishnu
Prasad Dash, K. K. Singh
Dhruv M. Patel, D. K. Basa, G.
V. S. Murthy
Munesh Matwa, Tapas Kumar
Bandyopadhyay, Ashok Kumar
Ray
Manendra
Singh
Parihar,
Sandip Ghosh Chowdhury
Geeta Kumari
Nicky
Kisku,
Ashish
Bhattacharyya
Ketul Pate, Hiren Hapani
Nipu Kumar, Goldy Kumari,
Chandan Choudhary, Swapan
Kr. Mitra, Durbadal Mandal,
Sukomal Ghosh
NIFFT Ranchi
Some studies on Heat-Affected Zone (HAZ) Toughness behavior
of API 5L X52 steel
Study of recrystallization behavior and kinetics of Aluminium
nitride precipitation in a cold rolled low carbon extra deep drawing
steel
Mechanical Properties of Bi-metals due to Diffusion Bonding
Indus University Study of the early stage of clustering in heat treated A356 alloy
Ahmedabad
using the DC Electrical Resistivity
IIT Kharagpur
Effect of tempering on vanadium modified 9% Cr steel
VNIT Nagpur
Variant Selection and Pre-transformation phase Reconstruction for
Deformation-Induced Transformation in AISI 304 Austenitic
Stainless Steel
NIT Jamshedpur Control on decarburization in Spring Steel
NIT Durgapur
Rolling response of Copper-Nickel alloy under various prior
Microstructural conditions
Indus University The double press/ double sinter FLN2-4405 component replaced
Ahmedabad
with Chromium-Steel
Netaji
Subash Development of Al-Si alloy through modified SIMA process
Institute
of
Technology
Patna
SESSION -IB: Materials Processing and Characterization - II (14.30-16.05 hrs) Venue: NML Auditorium
Sayan Sarkar, Anirban Naskar, Jadavpur
Snehajyoti Saha
University
Animesh kumar, Biraj Sahoo
NIFFT Ranchi
Shilpa Sharma, A Lava kumar,
Suneeti Purohit, S.K.Badjena
VSSUT Odisha
Studying the effect of carbon on mechanical property and
microstructure of TMT rebars
Effect of Hot Rolling on Microstructures of 3.2%-Si-Electrical
Steels
A review on ‘Nanostructured Steel’
TP-14
15:06 hrs
TP-15
15:18 hrs
TP-16
15:30 hrs
TP-17
15:42 hrs
TP-18
15:54 hrs
TP-19
16:20 hrs
TP-20
16:32 hrs
TP-21
16:44 hrs
TP-22
16:56 hrs
TP-23
17:08 hrs
TP-24
17:20 hrs
TP-25
17:32 hrs
TP-26
17:44 hrs
TP-27
11:30 hrs
Monika Gautam, Mrinmoy IIT Roorkee
Sinha, Sadhan Ghosh
Gaurav Sahu, Akash Kumar OPJIT Raigarh
Soni,
Himanshu
Shrivas,
Abhishek Behra
Abhishek Kumar Thakur
NIT Jamshedpur
Effect of various heat treatments on Microstructure and Mechanical
properties of Interstitial Free Steels
Accelerated Cooling of Hot Rolled Steel Plates – To Improve
Mechanical Properties
Evaluation of texture of austenite through variant selection from
ferrite in a hot deformed micro-alloyed steel
Microstructure and creep behavior of modified AZ91 magnesium
alloy
Microstructural characteristics of ancient sword
Punit Kumar, A. K. Mondal, A. NIT Rourkela
K Ray, S. Ghosh Chowdhury
Laxmi Priya Sahoo, A Lava VSSUT Odisha
kumar, Suneeti Purohit, S. K.
Badjena
Tea/Coffee Break (16.05-16.20 hrs)
SESSION -IC: Materials Processing and Characterization - III (16.20-18.00 hrs) Venue: NML Auditorium
Ved Prakash Rai, Gokul
Chandra Thakur
Nishant V. Pansuriya, Brijesh D.
koshiya
Chayon Mondal, Angshuman
Podder,
Devang
Gandhi,
Subhadip
Mazumdar
Amit
Sarkar
Himanshu Khalate, Swapnali
Sonar
Ashish Kumar Sinha1,Parikshit
Munda
Soumik Manik, Karimullashah
Mohammed,
V. Rajinikanth,
Sandeep Sangal, Sandip Ghosh
Chowdhury
Hitesh Patil, Kalpit Jain,
Darshika Gadhawe,Nikhil Gupta
Sayantan Das, Raghuvir Singh
NIT Jamshedpur
GEC
Gandhinagar
Jadavpur
University
VNIT Nagpur
NIFFT Ranchi
CSIR NML
Study of static recrystallization behavior and austenite grain
coarsening behavior of Niobium Micro alloyed steel
Friction Stir welding of Austenitic Steel
Effect of Cyclic Deformation on Corrosion Properties of
Metastable-grade Austenitic Stainless Steel
Evaluation of Mechanical Properties of as-milled and annealed
ODS 9%Cr steel powders by Nanoindentation Technique
Feasibility study of bainitic transformation
in 13Cr-4Ni
Martensitic Stainless steel
Determination of no-recrystallization temperature (Tnr) of a
pipeline grade steel
VNIT Nagpur
Study of corrosion behavior of Cr-Mn Stainless Steel
Jadavpur
University
Effect of cold rolling on sensitization susceptibility of 216L
stainless steel
SESSION -IIA: Advanced Materials and Damage Evaluation (11.30-13.30 hrs) Venue: NML Lecture Hall
S Mishra, A K Choubey , A IIT Bhubaneswar Microstructure and creep indentation studies of Mg-Al-Nd alloys
TP-28
11:42 hrs
TP-29
11:54 hrs
TP-30
12:06 hrs
TP-31
12:18 hrs
TP-32
12:30 hrs
TP-33
12:42 hrs
TP-34
12:54 hrs
TP-35
13:06 hrs
TP-36
13:18 hrs
Mandal
B. Barath Chakravarthi, R.Sujith
Kannan, Gosipathal, Sreedhar
Rohit Gupta, Deepankar S.
Gyan, Pradip Kumar Roy
Arnab
Bhowmick,
Nishant
Mallick,
Pritam Banerjee,
Divya,
Harshit Chaturvedi,
Karan Tiwary
Sayantan Das, Silva Basu,
Shreya Mukherjee
Ashwani K. Pandey, Laxmidhar
Besra, Soobhankar Pati
Rahul shaw, B. Sivakumar
CECRI
Kaaraikudi
BHU Varanasi
NIT Jamshedpur
Photoelectrochemical water spilitting of CdSe QDs sensitised LaB6
photoelectrodes
Novel hybrid carbide doped phenol formaldehyde ablative
composites for hypersonic flight application
SIMA- A New Technological Development in the Field of
Automotive Sectors
Jadavpur
Exfoliation Behaviour of Coating during In-Situ Bending of Zinc
University
coated Dual Phase Steel Sheet
IIT Bhubaneswar Affordable alkali doped strontium silicates electrolytes for low
temperature-SOFCs
NIT Durgapur
Surface Severe Mechanical Deformation of Stainless Steel and
commercially pure Titanium for Bio-implant application
Rishav Ghosh, Poulami Barat, Jadavpur
Mechanical and Corrosion Behavior of Interstitial Free Steel:
Ankita Mandal, Soma Garai, University
Influence of Strain Rate
Deep Sarkar
Kasimuthumaniyan S, Animesh IIT Bhubaneswar Synthesis of Fe-TiC composite by thermal plasma reduction of
Mandal, Saroj Kumar Singh, K.
ilmenite slag
Jayasankar,
Kalyani Mohanta
Shashank
Priya,
Kakoli NIFFT Ranchi
Development of Manganese Ferrite Nano systems via
Bhattacharya, Debdas Roy,
Hydrothermal Method & its potential application as MRI Contrast
Pritam Deb
Agent
SESSION -IIB: Extraction, Energy and Recycling-I (14.30-16.05 hrs) Venue: NML Lecture Hall
TP-37
14:30 hrs
TP-38
14:42 hrs
TP-39
14:54 hrs
TP-40
15:06 hrs
B. Dutta, R. Ruhela, M. Yadav,
A.K. Singh, K.K Sahu, N.P.H.
Padmanabhan, J.K. Chakravartty
Abhishek , Ashish Pandey,
Sanjay Kumar Sahu, Ajay
Kumar Mirche
Shailesh Priyadarshi, R.P.Singh,
P.N.Chaudhary
Dhunuram Tudu, Lalita Meena,
Pukhraj Meena, G.S Mahobia
IIT Bhubaneswar N-methyl-N,N,N-trioctyl
Ammonium-bis-(2-ethylhexyl)
Phosphonate (MTOA BEHP) encapsulated polymeric beads for
extraction of Gadolinium from Nitric acid Medium
OPJIT Raigarh
Optimization of R.H. degasser in secondary Steel making
NIT Jamshedpur
BHU Varanasi
Dephosphorization of Ferromanganese – A need for quality Steel
production
Use of waste plastics along with coal for the Reduction of Iron Ore
Pellets
TP-41
15:18 hrs
TP-42
15:30 hrs
TP-43
15:42 hrs
TP-44
15:54 hrs
TP-45
16:20 hrs
TP-46
16:32 hrs
TP-47
16:44 hrs
TP-48
16:56 hrs
TP-49
17:08 hrs
TP-50
17:20 hrs
TP-51
17:32 hrs
TP-52
17:44 hrs
and O.P Sinha
Himanshu Shrivas, Akash Soni, OPJIT Raigarh
Vishnu Pandey
Shikha Chaudhary
NIT Jamshedpur
A case study on Accretion Formation on DRI kiln during sponge
iron production
Improving the efficiency of Solar cells by using polymer based on
Benzodithiophene and Metallic Sandwich Materials
Utilization of ld slag through component modification Technique
Pritam Banerjee, Partho
NIT Jamshedpur
Banerjee
U. Prakash, Lalit K. Bhagat, S. Guru Ghasidas Dissoluton of Copper, Nickel and Cobalt from Copper slag by
Sinha, Anirban Ghosh, Pratima Vishwavidyalaya organic acids
Meshram, Abhilash, B.D.Pandey Bilaspur
Tea/Coffee Break (16.05-16.20 hrs)
SESSION -IIC: Extraction, Energy and Recycling-II (16.20-18.00 hrs) Venue: NML Lecture Hall
Ayush Pratik, Smitirupa Biswal,
G.Meghana Priya
Shreeya Gore, Sayali Visapure,
Vinusha Namadi, Naman
Somani
Ravindra Kumar, Ashish Kumar,
Alok kumar Gupta, Sudhanshu
Ranjan
Sidharth Patra, D.K.Mishra,
S.K.Badjena
Naveen Kumar Verma, Kishore
Kunal
Sayan Sarkar, Anirban Naskar,
Snehajyoti Saha, Sanjib Kr Saha
Akanksha Singh, Ramyasree
kancherla, Vinusha Namadi,
Pranit patil
Ashish Kumar, Ravindra Kumar,
Alok Kumar Gupta, Rajpal
Choudhary
NIT Jamshedpur
VNIT Nagpur
Pelletisation and Direct Reduction of Iron Ore in Single Footstep
for Reduction of Energy Utilization
Comparative study of Vacuum Carburizing Furnace and Seal
Quenched Furnace
NIT Jamshedpur
Reduction of CO2 emission by using biomass in Iron & Steel
production
VSSUT Odisha
A Study on Inclusion Control during Continuous Casting
NIT Jamshedpur
Replacement of building materials by Slag
Jadavpur
University
VNIT Nagpur
Recycling of saw flux from stainless steel waste and improvising
its slag detachability
Study of energy efficiency of iron and steel making
NIT Jamshedpur
Production of Ferro coke and its application in blast furnace
POSTER SESSION
Venue: Auditorium Foyer (CSIR-NML); Time: 18:00 – 18:50 Hrs; 09.04.2015
P-1
P-2
P-3
P-4
Subodh Rana, Aniruddha
Bose
Arpan Mondal,
Apratim
Biswas
Ashish Kumar Gupta, Saket
Ranjan, Amitesh Kumar
Silva Basu
NIT Jamshedpur
NIT Durgapur
NIFFT Ranchi
P-14
Jadavpur
University
Manendra Singh Parihar , VNIT Nagpur
Shoaib
Khan
,
B.Vishwanadh , R. Tewari ,
G. K. Dey
Syed Faisal Waqar, S. NIT Raipur
Ghosh Chowdhary
Nishant Mallick, Arnab NIT Jamshedpur
Bhowmick
M V Basant Kumar, GIET Gunupur
Sanjeeb Kumar Gupta
Monu
Kumari,
Ranjit NIT Jamshedpur
Prasad
Vaidehi
Gopal Sant, GEC
Swamit Kumar
Gandhinagar
Darshika Gadhawe, Sanjay VNIT Nagpur
Agarwal
Mahendra bokade Shraddha VNIT Nagpur
Rakshe, Y.Y.Mahajan
Deep Y Sheth , Parth H GEC
Gandhi
Gandhinagar
Nikita Kumari
NIT Jamshedpur
P-15
Simpa
P-5
P-6
P-7
P-8
P-9
P-10
P-11
P-12
P-13
Thakur,
Pooja NIT Jamshedpur
To study the effect of annealing on hardness and impurity distribution of
high purity Niobium
Wear behavior of Al-15wt.% Mg2Si in situ metal matrix composite
Effect of Plastic Deformation on Structure and Properties of 304
Stainless Steel
EBSD Analysis of TWIP and TRIP Steel at various Strain Rates
Microstructural characterization of silicide based coating on Nb Alloy
and Recrystallization behavior of Nb alloy
Vsco plastic self consistent modeling for texture evolution during
rolling
Cryogenic treatment of AISI M35 HSS
An Advanced Geo polymer From High Carbon Ferrochrome Slag
(HCFCS)
Study about the properties and utilization of Red mud
Rare earth metals in India
Theoretical studies on reduction of Chromite ore using Fact Sage 6.4
software
Analysis of bend test specimen
Crevice Corrosion of Stainless steel under Offshore Conditions
Non- Destructive Failure Analysis and Measurement for Molded
Devices and Complex Assemblies with radiography
Phase analysis of TWIP steel with 3%, 6%, 8% and 10% Aluminium
P-16
P-17
P-18
P-19
P-20
P-21
P-22
P-23
P-24
P-25
P-26
P-27
P-28
P-29
P-30
P-31
Jaiswal
Sumit Chandra, Shashi
Ratna, Chandan Choudhary,
Swapan Kr. Mitra, Durbadal
Mandal, Sukomal Ghosh
Nisarg Soni
with strain
Netaji
Subash Enhancement in Mechanical Properties of Al-Si (Silicon variation)
Institute
of Alloy through Strain Induced Melt Activation Process
Technology Patna
Indus University
Ahmedabad
Kumar Harsh Vardhan
NIT Jamshedpur
Arun kumar, A Lava kumar, VSSUT Odisha
P.K.Singh, S.K.Badjena
Prathmesh Joshi, Kulwant VNIT Nagpur
Singh
Sunil kumar, Abhishek NIT Jamshedpur
Nayan
Sunil Munda, Hani Kumar, NIT Jamshedpur
Rajesh Meena
Nishant J Bhatt, Nikunj P Indus University
Trivedi
Ahmedabad
Swapnil Thormothe, Aniket VNIT Nagpur
Rukade
Sainath Nakade, Himanshu VNIT Nagpur
Khalate, Akanksha Singh
Safal Pachpute, Saurabh VNIT Nagpur
Gaidhane, Asmita Veronica
Santosh Kumar Singh, NIT Jamshedpur
Rajneesh Kumar, M. K.
Agrawal
Devang Pathak, Kunal Indus University
Mehta,
Rutu
Parmar, Ahmedabad
Twinkal Gadhesariya D.K.
Basa
Shuchi Karn
NIT Jamshedpur
Gaurav Sahu, Annu Sharma, OPJIT Raigarh
Himanshu Shrivas
Prasanta
Patro,
Chitta GIET Gunupur
Achieving Higher Density using various Compaction methods- A
Review
Optical Microscope & Image Analyzer
A study on ‘Metallic Foams: Characterization, Properties &
Application’
Tribological Testing, Analysis and Characterization of Magnetron
Sputtered Ti-Nb-N coatings on stainless steel
Synthesis and Characterization of ZnO Nanoparticle using
Electrodeposition Method
Innovation in Rail Steels
Powder Metallurgy components for Aerospace application
Study of Controlled Cooling of Micro alloyed Forging Steel C38+N &
Investigations of problem of bainitic patches
Effect of cold work on the electrochemical property of carbon steel in
alkaline condition
Material Characterization of alloys SS 304 and SS 347 and study of
their susceptibility to corrosion
A Finite Element Modeling of Friction Stir Welding of Aluminum alloy
6061-T6
Emerging Trends in Melting Technologies and Practices
Overview of Technologies for Reduction in Greenhouse Gas Emission
in Iron and Steel Industries
Ceramic Matrix Composite by using EAF slag
Textile waste water : a new prospective for irrigation
P-32
P-33
P-34
P-35
P-36
P-37
P-38
P-39
P-40
P-41
P-42
P-43
P-44
P-45
P-46
Ranjan
Das,
Prangya
Ranjan Rout, Sudip Kumar
Sen, Sangeeta Raut
Ayush Srivastava
S P Padhee, A R Sheikh, N
P H Padmanabhan, K
Sanjay, K K Sahu
Gaurav Kumar, Shruti Sinha
Sasmita Rath, D.K.Mishra,
S.K.Badjena
Aniruddha Mishra, Bharati
Sahu,
Kalyan
Mishra,
Sudhanshu S. Singh
Abhilasha Izarda, Kaushal
Kishor Ray
Shuchi Karn
NIFFT Ranchi
IIT Bhubaneswar
Alternatives to Coal for Iron Making
Mathematical modeling of ruthenium extraction using ionic liquid in
nitric acid medium
NIT Jamshedpur
VSSUT Odisha
Next Generation Steel Making Processes
A Study on Manufacturing of Ceramic Tiles Using Fly Ash
OPJIT Raigarh
Counteracting the ring formation in DRI rotary kiln
OPJIT Raigarh
An investigation of steel plant slag reinforced material for the
development of ceramic composite material
NIT Jamshedpur
Application of Carbon Nanotubes (CNTs) in Nano- Electro Mechanical
Systems (NEMS)
Tajani Fejal H, Kotadiya Indus University Synthesis of Nano Powder Using Induction Plasma
Harsh D, Kakkad Raj P
Ahmedabad
Shivam Nigam, Nupoor NIT Jamshedpur
Self - healing Materials
Agrawal
Mohan Agrawal, Rashmi GIET Gunupur
Enhancement of antibiotic producing mycelia’s activity in presence of
Choudhary,
Ashutosh
metallic iron dust
Mishra, Anand Mohan
Hasda, T.V.G.Rao
Sovam Talukdar, Arnab NIT Jamshedpur
A study on the corrosion behavior of Duplex Stainless Steel
Bhowmick
Deepak Kumar, Raj Kumar NIT Jamshedpur
Graphene- A noble material produced from Graphite
Yadav, Rajesh Meena,
Deepak Kumar
Sovam Talukdar, Jay
NIT Jamshedpur
Effect Bias Voltage on Thin film plasticity: A Nano indentation study
Chakraborty Kaustav Barat,
on Superhard TiN coatings
N.V. Ravikumar
Ankita Saraf, Smriti Kiran,
NIT Jamshedpur
Innovations in Iron and Steel - Dual phase Steels with 450-600Mpa
Aarushee Aggrawal
Strength
Swastika Tripathy, A Lava
VSSUT Odisha
A review on Ancient Advanced Material :Wootz Steel
P-47
P-48
P-49
P-50
P-51
P-52
kumar, D.K.Mishra,
S.K.Badjena
Aishwarya Mohanty,
Suneeti Purohit, A Lava
kumar, S.K.Badjena
Debashis Kaunar, A Lava
kumar, P.K.Katiyar and
S.K.Badjena
Abhishek Yerpude,
Priyanka raj Gupta, Deepak
mourya,Ravi shrivastav
Nisarg Dave, Nishant
Narayan, Anirudh Murthy
Rohit Gupta, Deepankar S.
Gyan, Pradip Kumar Roy
Arun Kumar Thakur
VSSUT Odisha
A study on ‘Synthesis of Graphene & Its Applications’
VSSUT Odisha
A Study on Failure of Tungsten Carbide Tool bits
OPJIT Raigarh
A Study on the Hydrogen Induced Cracking of Steel
Indus University
Ahmedabad
BHU Varanasi
Recent Developments in PVD Process for Thin Film Process Coating by
Using Magnetron Sputtering
Comparison of GDC electrolyte-LSCF cathode IT-SOFC system with
conventional power sources
Innovations in Iron and Steel
PEC University
of Technology
Chandigarh.