Hörmann at the 2015 BAU
New Products from Europe’s No. 1
ThermoPro entrance doors / ThermoPro Plus entrance doors
New design styles with inlays with a stainless steel look
ThermoPro with inlays
with a stainless steel look
TPS 015
• Stainless steel handle HB 14-2 on
steel infill with inlays with a stainless
steel look
• U D-value up to 1.1 W/‌(m²·K)*
• Also available as ThermoPro Plus
• Available immediately
TPS 025
• Stainless steel handle HB 14-2 on
steel infill with inlays with a stainless
steel look, full glazing: double
glazing, insulated glass, laminated
safety glass outside, single-pane
safety glass inside, Mastercarré
• UD-value up to 1.4 W/‌(m²·K)*
• Available immediately
TPS 015
TPS 025
TPS Plus 800
TPS Plus 810
ThermoPro Plus
with rectangular glazing
and stainless steel frame
Style TPS Plus 800
• Stainless steel handle HB 38-2
on steel infill
• 4 rectangular glazings with stainless
steel frame: triple insulated glass,
exterior laminated safety glass,
centre sand-blasted float, interior
clear laminated safety glass
• U D-value up to 0.88 W/‌(m²·K)*
• Available immediately
Style TPS Plus 810
• Stainless steel handle HB 38-2
on steel infill
• 3 rectangular glazings with clear
all-round stripe and stainless steel
frame: triple insulated glass, exterior
laminated safety glass, centre
sand-blasted float, interior clear
single-pane safety glass
• UD-value up to 0.96 W/‌(m²·K)*
• Available immediately
* Depending on the door size, stated values
for RAM 1230 × 2180 mm
2
Easy opening of the ThermoPro Plus entrance
doors with the new comfort locks
Comfort locks
for ThermoPro Plus
Multiple-point locking
with opening via a hand transmitter
• Door locks automatically upon
closing (mechanical)
• Door can be opened from
the outside via the hand transmitter
or profile cylinder
• Door can be opened from
the inside via the hand transmitter,
intercom system, profile cylinder
or lever handle
• Motor-driven opening
can be deactivated by locking the
main latch via the profile cylinder.
• Available from summer 2015
Hand transmitter HSE 2 BS
Textured black
with plastic caps
Knob cylinder with electronic
access control
• The free-moving knob cylinder
on the outside is coupled temporarily
by stopping the transponder
• The door is unlocked from outside
by turning the cylinder
• The door is unlocked from
the inside via the knob cylinder
• Available from summer 2015
Access transponder
3
Aluminium entrance door ThermoSafe
New door styles matching sectional garage doors
New ThermoSafe entrance
door styles
• 6 new styles with grooves and glazings
• Matching sectional garage doors
and M, L and D-ribbing
• Available from spring 2015
• Style 514 available from summer 2015
4
Version opening outwards
• Optionally available for all ThermoSafe
entrance door styles
• Available from summer 2015
Style 862
Style 867
Style 189
Style 871
Style 872
Style 514
5
Aluminium entrance door ThermoSafe
Increased comfort and improved design
4-sided door seal
New, flocked seal
3-sided door seal
New finger-scan
Additional third seal
• Elegantly integrated into the door handle
• Additional flocked seal in the door frame
• Optional for all ThermoSafe entrance doors
• As standard for all ThermoSafe entrance
doors from 01.02.2015
• Available from summer 2015
6
Aluminium entrance doors ThermoSafe / ThermoCarbon
For generously proportioned entrance designs and increased comfort
3 m
2 m
1 m
ThermoCarbon XXL
ThermoSafe XXL
Room-high entrance doors
Automatic lock S5 / S7 Smart
• ThermoSafe XXL entrance doors
up to 2500 mm height
• With condition scanner for the entrance door
(locked or unlocked)
• ThermoCarbon XXL entrance doors
up to 3000 mm height
• Operation and condition scanner operated via
optional hand transmitter HS 5 BS or BiSecur app
• Available from spring 2015
• Available immediately for ThermoSafe
entrance doors
• Available for ThermoCarbon entrance
doors from spring 2015
7
Sectional garage doors
New door aesthetics with D and T-ribbed styles
8
LPU sectional garage
doors, D-ribbed
and T-ribbed
• D-ribbed with 2-rib design
• T-ribbed with 3-rib design
• Silkgrain surface finish
in all preferred colours
and RAL to choose
• Four styles with inlays in stainless
steel or timber look for T-ribbing
• Available from summer 2015
D-ribbed
T-ribbed
T-ribbed with continuous ribs
in stainless steel look
T-ribbed with continuous ribs
in timber look
T-ribbed with divided ribs
in stainless steel look
T-ribbed with divided ribs
in timber look
9
Garage side doors
The practical door to match the garage door
Side door NT 60
• 60 mm aluminium frame construction
Side door NT 60 for sectional garage doors
• The infill is fastened by glazing beads
• As standard with guide rollers
• For sectional garage doors
and RollMatic roller garage doors
• Available from summer 2015
Viewed from inside
Viewed from outside
Lever handle set as standard
Side door NT 60 for RollMatic roller garage doors
Viewed from inside
Viewed from outside
10
Lever handle set as standard
Entrance gate operators
For special fitting situations
Entrance gate operator
VersaMatic P
• Max. height 2000 mm
• Max. width 3000 mm
• Max. weight 300 kg
• Opening angle max. 120°
• Stand-by < 1 watt
• Available from summer 2015
3 types of fitting
for the operator housing
• For different site requirements
• For matching operator views
• For the optimised operation
of the emergency release
• For space-saving fitting
Type of fitting I
Type of fitting II
Type of fitting III
User-friendly emergency release
11
Control elements with BiSecur radio technology
Increased comfort and an exclusive design for your home
Exclusive radio internal
push buttons
and socket receivers
• Exclusive design for modern home
interiors
• Clear lines with harmoniously
rounded edges
• High-gloss white surface in RAL 9016
• Limited housing depth
• Integrated battery, no wiring necessary
• BiSecur radio technology
with a particularly large range
• For the operation of Hörmann
operators and socket receivers
(see )
• Available from summer 2015
12
1-button radio internal push button
• 1 button function with large button
for simple operation
• Available from summer 2015
4-button radio internal push button
• 4 button functions
• Available from summer 2015
5-button radio internal push button
• 4 button functions plus query button
• Available from summer 2015
1-channel socket receiver
• Impulse control: power on / power off
• For electrical devices up to 2500 watt
• With status feedback via the HS 5 BS
hand transmitter or the BiSecur app
• Can be controlled via all Hörmann
hand transmitters, radio control
elements, radio internal push buttons
or BiSecur app
• Available from autumn 2015
2-channel socket receiver
• Same functions as 1-channel
• Additional volt-free output
for the impulse function on garage door
operators of other manufacturers
(without feedback)
• Available from autumn 2015
13
Door operators
Ideally suited for barrier-free residences
Internal door operator
PortaMatic
• Can be retrofitted up to a door leaf
weight of 80 kg and door leaf widths
up to 1100 mm
• Dimensions (H × D × W)
60 mm × 78 mm × 560 mm,
weight 2.9 kg
• Plug-in, 3 m cable
• Colour: silver (anodised with a stainless
steel look) or RAL 9016
• Fully automatic or semi-automatic,
AutoClose (door closer function) push
operation, always open, ventilation
position (manual)
• Integrated BiSecur radio with door
position query
• Door control and monitoring via BiSecur
app or HS 5 BS hand transmitter
• Reversing function
• Acoustic warning signal, can be selected
before and / or during door travel
• Direct or indirect LED illumination
that can also be selected or selected
in addition to the acoustic signal
as a warning signal before and / or
during door travel
• Connection and control of motor locks
and electric strikes possible
• Available from summer 2015
14
Integrated ECturn Inside entrance door operator
• For automatic or manual opening
• For automatic closing
• Low-energy and automatic mode operation
acc. to DIN 18650 / EN 16005
• Easy and quick connection
• Additional safety sensors for users requiring
extra security
• For additional user comfort
via radio remote controls
• Optional battery for maximum safety in case
of power failure – convenient for people
with reduced mobility; the door temporarily
continues to open and close automatically
• Plug-in wiring, simplified fitting
• Operating modes: “automatic”,
“permanently open”, “night”
• Available from summer 2015
15
Door operators for fire-rated and smoke-tight door assemblies
For barrier-free construction
16
Door operator HDO 200
• For multi-function doors
and hollow profiled section doors
• Convenient opening for barrier-free
passages
• Quiet operation, therefore suitable
for many applications, e. g. in offices
or hospitals
• Speed control ensures a uniform
opening and closing speed
HDO 200
• Operating modes: “automatic”,
“permanently open”, “night”,
“closing time”
• Integrated programme switch
for “off”, “automatic”
and “permanently open”
• Operation via buttons, radar / motion
detector, etc.
• Optionally with BiSecur radio
technology that can be operated
via all Hörmann hand transmitters,
radio control elements, radio internal
push buttons or BiSecur app
• Available from summer 2015
HDO 200 with sensor strip
17
Developed with an eye to the future –
the design fulfils the fire-protection
requirements of the future product
standard EN 16034.
• Door leaf as a fully bonded
composite construction
for particularly high stability
and leaf strength
• Permanently flush surface
• Harmonious overall appearance
of double-leaf doors due to the
flush-fitting transition between
the door leaves
• Available in thin and thick rebate
versions with 65 mm door leaf
• As flush-closing version with 59 mm
door leaf
Versions / functions
T30
EI230
H3 OD
Available immediately
T90
EI290
H16 OD
Available from summer 2015
EI2120
H12 OD
Available from summer 2015
MZ
D65 OD
Available from summer 2015
Additional functions
RS
RC 2
RC 3
18
Available immediately
Available immediately
Available from summer 2015
D
PE
DE VELO
FUT
URE EURO
PE
A
ARD
AND
ST
New fully bonded composite construction
with permanently flush surface
R
FO
N
Steel fire-rated door Hx OD
New decor surfaces
• High-quality decor surfaces
in 3 detailed timber looks:
Golden Oak
Dark Oak
Winchester Oak
• Frame powder-coated in the basic
colour of the timber
• Available from summer 2015
T90
EI290
DryFix frames
for steel fire-rated doors
• Approved for T90 and EI 290
• Available immediately
T30
T90
MZ
Double-shell block frame
• For T30, T90 and MZ doors
• Expanded frame depth for 90°
openings in hallway areas
• For fitting in external walls,
the external insulation
can be fitted over the frame
• Infilling at the factory renders
time-consuming on-site fitting
with mortar unnecessary
• Available immediately
19
Sliding doors / visibility windows
More functional properties and increased acoustic insulation
Sliding door frame,
box design, sealed
• Increased acoustic insulation
and protection against odours
and draughts
• Optional acoustic insulation,
test value: R W,P ≥ 29 dB
• Available from spring 2015
Visibility windows
• Double-shell for subsequent fitting
with glazing on both sides
• High acoustic insulation with tested
acoustic rating value R W,P = 54 dB
• Bullet-proof, tested class FB 4-S
acc. to DIN EN 1522 / 1523
• Available from spring 2015
20
Multi-purpose door and technical room door
Innovative solutions for special requirements
Multi-purpose door
MZ Thermo Plus 011
• 80 mm aluminium frame
with thermal break
• 65-mm-thick steel door leaf with
thermal break and PU rigid foam infill
• High thermal insulation
with a U D-value of up to 0.82 W/‌(m²·K)
• Available immediately
TPS Plus 011
Stainless steel technical
room door STS / STU
MZ Aqua
• Stainless steel multi-purpose door
• With water-resistant PU infill
• Flush-fitting and as a thick
rebate version
• Door leaf glued flush over
the entire surface
• Surface finishes: V2 A, 1.4201, K240
polished, V2 A, 1.4301, matt circular
textured finish and V4 A, 1.4571,
striped finish
• Available immediately
21
Fire sliding doors
Elegant and automated solutions for public areas
T30
EI230
Flush-stopping
fire sliding door
without guiding profile
The alternative to double-leaf hinged
doors, e.g. in entrance areas.
High-quality door appearance
with concealed parking area in a recess
with a recess flap.
Versions/functions
• T30 / EI230 fire sliding door,
flush-stopping
• Spring-loaded stainless steel guide
bolt, intumescent coating
and rubber double seal ensure safety
• Flush, fully bonded door sets
• Single-leaf
• Max. size 7500 × 4500 mm
• Available from summer 2015
Surface finishes
• Pearlgrain, galvanized
• Smooth sheet steel, galvanized
• Stainless steel V2 A, 1.4201,
K240 polished
• Preferred colours, RAL to choose
and colours according to NCS
Options
• Glazing
• Wicket door
• Compensator
• Recess flap
Spring-loaded stainless steel guide bolt
22
T30
EI230
T90
EI290
Fire sliding door
with convenient
operator handling
• T30 / EI230 and T90 / EI290
fire sliding door
• MZ multi-purpose sliding door
• Quick opening and closing during
daily operation through the
SupraMatic HT operator
• Convenient operation with
push button, key switch
or hand transmitter
• Operator is released
by a mechanism in case of fire
(patent pending)
• Reliable closing of the door
by weights in case of fire
• The external control 360
can be optionally connected
• Available from summer 2015
T30
EI230
Hinged garage doors
DFT 30-1, DFT MZ
• T30 / EI230 fire protection hinged
garage door
• MZ multi-purpose hinged garage door
• Flush fitting
• Flush, fully bonded door sets
• Block frame 140/75 mm,
with all-round sealing
• Surface finishes: smooth sheet steel,
galvanized Pearlgrain, galvanized
• Preferred colours, RAL to choose
and colours according to NCS
• Single-leaf, max. size 4000 × 4000 mm
• Available from summer 2015
23
DD rolling shutter / rolling grille
New innovative rolling shutter generation with direct drive operator
For door openings
up to 12000 mm width
Curtains and maximum door sizes
(width × height)
• Decotherm S, 10000 × 9000 mm
• Decotherm A, 5000 × 4500 mm
• HR 120 S, 8750 × 8000 mm
• HR 120 A, 12000 × 8000 mm
• HR 120 aero, 12000 × 8000 mm
• HR 116 A, 11000 × 9000 mm
• HG-L, 9000 × 5500 mm
• HG-V, 12000 × 8000 mm
• HG-S, 8750 × 8000 mm
• Available from spring 2015
All rolling shutter curtains and rolling
grilles HG-L with wind locks or pull-out
protection as standard.
24
With hinged operator:
more flexibility and simple fitting
Narrow aluminium boom
• Only 80 mm side space requirement
for all door sizes
• Fitted quickly and easily directly
to the building structure
without anchor technology
• 2-part design from 6000 mm door
height enables better handling during
transport and fitting
• Pre-assembled aluminium subframe
profiles with adapter groove
constitute an installation-friendly
visual unit with the side guides
Limited sideroom
• Bearing side only 160 mm
• Operator side only 260 mm
Variable operator fitting
• New support bracket technology
provides 3 fitting positions
to choose from – downward,
horizontal or upward
• With the horizontal or upward
alignment, no operator technology
is visible underneath the barrel
Guide channel that is gentle
on the door
• Newly developed metal holders
with polyamide sliding surfaces
reduce the wear on the door curtain
during feed-in
• Easy to service thanks to simple
dismantling
Easy fitting
Operator fitting to the bottom
Horizontal operator fitting
• The door components are positioned
on the building structure using only
the metre line and console template
• Ready-to-fit unit consisting
of curtain, barrel and support
bracket is delivered as standard
• Side guide markings allow quick
adjustment of the door’s
end-of-travel positions
• Stackable packaging units optimise
transport and logistics
Operator fitting to the top
Guide channel that is gentle on the door
25
DD S6 rolling shutter
Fast and reliable with soft start and soft stop
Optional accessory package for
rolling shutter DD with Decotherm S
curtain and colour coating
• Powerful FU operators with soft start
and soft stop are gentle on the door
technology
• Up to 30 door cycles per hour
or 500 per day are possible
• The door construction is designed
for at least 200000 door cycles
• Opening speed up to 1.1 m/sec
• Light grilles in the side guides
safeguard the door area even
with high closing speeds
• No-wear monitoring of the door
operation as no sensors are required
on the curtain
• L-pads on the interior of the curtain
minimise noise and wear
• Space-saving design optimises
the flow of traffic and reduces
energy loss
• Max. width 5000 mm,
max. height 9000 mm
• Available from summer 2015
26
SB rolling shutter / rolling grille
With a compact operator variation
Rolling shutter / rolling grille SB
with space-saving
operator WA 300 AR S4
• Fitted as a small operator unit next
to the shaft, meaning that no
components are visible underneath
the door barrel
• Only 100 mm additional sideroom
is required on the operator side
• Soft start and soft stop allow gentle
and quiet door travel
• Due to the power limit in the “Open”
and “Close” travel directions,
impulse operation without a closing
edge safety device is possible for
almost all curtain sizes and variations
• Installed separately from the
operator, the control unit can be
quickly and conveniently adjusted
from the floor (end-of-travel positions
and control parameters)
• Can be upgraded with external
control 360
• The standard “secured release”
facilitates switching to manual
door operation (for use inside
and outside buildings)
• Available with and without
curtain cover
• Suitable for all SB rolling shutters
and SB rolling grilles indoors and
outdoors, optimally suited for shop
and underground garage doors
• Available from spring 2015
27
Side doors for industrial doors
With matching frame construction
Viewed from inside
Lever handle set as standard
Viewed from outside
Door leaf, frame and threshold rail with thermal break
Side door with thermal break NT 80 Thermo
• 80 mm aluminium frame construction with thermal break
• Panel infill with thermal break, fixing through glazing beads
• Glazing frame with thermal break with triple Duratec synthetic glazing
• For industrial sectional doors
• Available from spring 2015
28
Viewed from inside with synthetic glazing
Lever handle set as standard
Viewed from outside
Viewed from inside with sections
Side door NT 60
• 60 mm aluminium frame construction
• The infill is fastened by glazing beads
• Available in all surface finishes and colours of the respective
industrial doors
• For industrial sectional doors, industrial rolling shutters,
speed sectional doors and spiral doors
• Available from spring 2015
29
High-speed doors
New sections with thermal break for even better thermal insulation
New glazing elements
with even frame division
• Frame construction with thermal break
(67 mm profile plus triple-pane glazing)
• Particularly easy to service due to glazing beads
for the easy replacement of individual synthetic panes
• Available from autumn 2015
30
ISO Speed Cold with an exceptional thermal
insulation value for sections of U = 0.24 W/‌(m²·K)
Sections with 42 mm
fitting depth for spiral
and speed sectional doors
HS 7030 PU 42
HS 5015 PU H 42
HS 5015 PU N 42
HS 6015 PU V 42
• Sections with thermal break with
good thermal insulation and a U-value
for sections of 0.9 W/‌(m²·K)
• Section height 250 mm, matching
industrial sectional doors with
Micrograin surface, similar
to RAL 9006, interior Stucco surface,
similar to RAL 9002
• Available from autumn 2015
Sections with 67 mm
fitting depth for spiral
and speed sectional doors
HS 5015 PU H 67
HS 6015 PU V 67
• Sections with thermal break
for very high thermal insulation
• U-value of sections 0.33 W/‌(m²·K)
• Section height 375 mm, matching
industrial sectional doors with
Micrograin surface, exterior similar
to RAL 9006, interior Stucco surface
similar to RAL 9002
• Available from autumn 2015
Sections with 100 mm
fitting depth
for ISO Speed Cold 100
ISO Speed Cold H 100
ISO Speed Cold V 100
• Excellent thermal insulation through
sections with thermal break
• Exceptional U-value of sections
0.24 W/‌(m²·K)
• Section height 500 mm, matching
industrial sectional doors with Stucco
surface, similar to RAL 9002
• Safety light grilles in the side
assemblies with non-contact
automatic safety cut-out
• Available from autumn 2015
31
High-speed doors
More convenient opening and connecting
Scanprotect
• High-end motion-detector
and monitoring system
with the help of laser technology
• Fast and targeted automatic
door opening
• Reliable advance protection
• Convenient adjustment possible
via the control
• Set-up assistant with visible LED dots
• Plug-in type wiring for easy
connection to the door control
• Connection to the door control
• Objects in the monitored area
can be masked, “special teach-in”
• Due to laser technology, the
operational safety function
is available even with different
floor coverings
• Especially suited for outdoor areas,
as it is not susceptible to adverse
weather conditions like snow or rain
• Available from spring 2015
Sensor Scanprotect
32
Reduced fitting times
through colour-coding of the wires
Colour-coded plug-in
control wiring
• Wiring of the operator
via a distributor box
• Wiring of the operator and control
through a simple plug-in connection
• Easy connection of accessory
components and safety devices
through colour-coded plug-in
connections and connection wires
• Fitting time reduced for electrical
wiring of the door
• As standard, no wiring with terminal
screws is required for control
and operator, e. g. for the pull switch
or the light grille
• Available from spring 2015
Safety equipment, above
Safety equipment, below
Safety equipment, above
Safety equipment, below
Impulse generator 1
Crash
Impulse generator 2
Light grille transmitter
Impulse generator 3
Light grille receiver
Matching housing concept
for 1-phase
and 3-phase controls
• Matching housing
• The same circuit boards (detector,
extension, etc.) can be used for the
1-phase and the 3-phase control
• New integrated power supply unit
with higher performance
• Monitored 24V brake circuit
• Modified output stage technology
• 3rd volt-free contact as standard
• Available from spring 2015
1-phase control BK 150 FU E-1
3-phase control AK 500 FUE-1
33
Loading technology
Innovative solutions for more convenience and security
MWB mechanical wheel
blocking system
• Prevents the lorry from leaving
the safe docking position during
the loading process, e.g. by braking
of the forklift when driving in or out.
• Wheel guide approx. 5 m long,
rotating locking arm with fold-out
support pedestal, operation bracket
with stop sign and operating
instructions, release via a foot pedal
Optionally with control:
• Door release function: the door
can only be opened if the lorry
is secured against rolling away
• Lorry release function: the lorry
is allowed to leave as soon
as the MWB wheel blocking system
is in the home position
• Status feedback via 5 LEDs
on the control housing inside,
via a warning light outside
• Available from summer 2015
Push button control
300U
With integrated option relay
on request
• Open limit switch reporting
for dock leveller release
• No magnet switch required
on the door
• Minimal wiring required
• Available from spring 2015
In combination with door operator
WA 300 S4 or WA 300 R S4
• Space-saving and economical
• Compatible with all Hörmann dock
leveller controls
• Door operator power supply
through the dock leveller control
Push button control 300U
in combination with control 420 S
34
Control for the MWB
wheel-blocking system
Flap dock shelters
with straight roof
• With gutter as standard
• Rain water is conducted over
the sides of the door seal
and not the front edge
• As link arm construction DTLR / DSLR
• As scissor construction DTSR / DSSR
• As roadway model DTSR-G / DSSR-G
• Available from spring 2015
DSLR flap dock shelter
Door holder
for DOBO system
• Swivel type holder for fastening
open vehicle doors.
• Prevents the vehicle doors
from swinging back
• Available with a post height
of 900 mm and 2 arm lengths:
580 or 880 mm
• Available immediately
35
Hörmann’s new Architects’ Program
• New, modern, user-friendly interface
• Clearly structured navigation via dropdown menus
and symbols
• Easy search function
• No program installation required
• Complete database for more than 660 Hörmann
products with texts for invitation of tenders
and more than 8000 drawings (DWG and PDF format)
• Photo-realistic presentation of many products
• Available for download at the Hörmann architects’
forum or on a data medium (full version)
Issue 01.2015 / Print 01.2015 / HF 86275 EN / PDF
The new Architects’ Program 8.0
www.hoermann.com
More than 8,000 drawings for over 660 products