1. No category

mirasol
™
G L A Z E D P o r c ela i n F l o o r & M O S A IC T I L E
& G lazed Ce r am i c W all T i le
Mirasol, Silver Marble in 10 x 14 on tub and wall with 24 x 24 on floor.
mirasol
™
Crisp graphics and wide pattern variation
achieved with Reveal Imaging™ technology,
create the realistic look of marble found in
Mirasol. The porcelain floor and ceramic wall
tile are TruEdge™ for ease of installation. Three
popular floor sizes and a 2x4 brick-joint mosaic
offered in a matte finish, as well as, two large
ceramic wall sizes offered in a glossy finish
complement the design with contrasting surface
finishes. A nice trim package finishes the line.
PORCELAIN FIELD TILE
Bianco Carrara ML70
Crema Laila ML 71
Silver Marble ML72
Crema Laila ML 71
2 x 4 Mosaic*
Silver Marble ML72
2 x 4 Mosaic*
Crema Laila ML 71
10 x 14 Wall Tile
Silver Marble ML72
10 x 14 Wall Tile
PORCELAIN MOSAIC TILE
Bianco Carrara ML70
2 x 4 Mosaic*
*Mosaic tile is mesh-mounted.
CERAMIC WALL TILE
Bianco Carrara ML70
10 x 14 Wall Tile
Mirasol, Silver Marble in 10 x 14 on tub and wall with 24 x 24 on floor.
S I Z E S , S H A D E VA R I AT I O N & P R I C I N G
12 x 24 Field Tile Q
(11-5/8" x 23-7/16")
(29.56 cm x 59.44 cm)
24 x 24 Field Tile Q
(23-7/16" x 23-7/16")
(59.44 cm x 59.44 cm)
12 x 12 Field Tile Q
(11-1/2" x 11-1/2")
(29.56 cm x 29.56 cm)
Q Field tile sizes are modular.
2 x 4 Mosaic (Brick-joint)
(11-7/8" x 11-7/8" sheet)
(30.2 cm x 32.6 cm sheet)
Mesh-mounted
12 x 24 Field Tile
(12" x 24")
(30.0 cm x 60.0 cm)
10 x 14 Wall Tile
(9-27/32" x 13-3/4")
(25.0 cm x 35.0 cm)
Tile Thickness: 3/8"
High
(V3)
Recommended Grout Joint: 1/8" Floor and Mosaic
(3/16" when rectangular sizes are used in a staggered brick-joint
pattern where the overlap does not exceed 33%); 1/16" Wall
(Note: Floor and Wall 12"x24" tiles have slightly different sizes and
will not modulate using standard recommended grout widths).
Pricing: Medium
TRIM
Bullnose
S-43C9
3 x 12
Surface Wall Bullnose
S-43C9
3 x 12
Surface Wall Bullnose
S-4310
3 x 10
PAT T E R N I D E A S
Corridor Pattern
17 pcs. per 100 s/f
24 x 24
67%
17 pcs. per 100 s/f
12 x 24
33%
Cobblestone Pattern
32 pcs. per 100 s/f
12 x 24
67%
21 pcs. per 100 s/f
12 x 12
33%
Surface Wall Bullnose
Outcorner
SN-4310
3x3
Photo features 3 x 12 Accent in Paintbrush Brown
PERFORMANCE CHARACTERISTICS
Floor &
Mosaic
Wall
D.C.O.F.
Wet
Wet
C.O.F.
Dry
Moisture
Absorption
Breaking
Strength
MOH’s
Chemical
Resistance
Abrasion
Resistance
≥0.42
≥0.65
≥0.80
<0.5%
>450 lbs.
8.0
Resistant
N/A
<20.0%
120-230 lbs.
4.0 - 6.5
Resistant
N/A
N/A
N/A
Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTest™ helps to assess a product’s suitability for a commercial environment. For more information, visit www.americanolean.com/DCOF.
FLOOR & MOSAIC APPLICATIONs
Floors/Patios: Covered
& Uncovered
WALL APPLICATIONs
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
LT
RES COM COM
RES COM
LT
RES COM COM
RES COM
Floors/Patios: Covered
& Uncovered
Walls/Backsplashes
Walls/Backsplashes
Countertops
Countertops
Pool Linings
Pool Linings
Pool Decking
Pool Decking
APPLICATION NOTES:
•Floor tile and mosaic tile are suitable for exterior applications in freezing and non-freezing climates when proper
installation methods are followed.
•Wall tile is suitable for exterior applications in non-freezing climates only.
•Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with
a dimensional length size greater than 20 x 20, large rectangles or tiles with greater dimensional thickness than
normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
•Wall field tile not recommended for floor applications.
• Use of a latex modified thin-set is recommended for proper installation.
•Not for use on ramps.
• For additional information, refer to Factors to Consider at www.americanolean.com/CommercialFactors.
Cleaning Procedures
• Remove loose dust and dirt with a damp cloth or sponge
• Use a neutral, non-abrasive cleaner suitable for porcelain tile
• Remove cleaning solution with a clean, damp sponge or mop
Installation Methods
Backing Materials
• Concrete
• Mortar bed
• Cementitious backer board
Setting
• Latex modified thin-set
• Epoxy
Grouting
• Sanded grout
•Grout Joint: 1/8" Floor and Mosaic
(3/16" when rectangular sizes are used in a staggered
brick-joint pattern where the overlap does not exceed 33%); 1/16" Wall (Note: Floor and Wall 12"x24" tiles have slightly different sizes and will not modulate using standard
recommended grout widths).
NOTES
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in
product selection. Not for use on ramps.
For additional information, refer to “Factors to Consider” at http://americanolean.com/factors-to-consider.cfm.
Since there is shade variation in all natural products, the tile and trim supplied for your particular installation may not match these
samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.
Manufactured in accordance with ANSI A137.1 standards.
Naturally, many of our products can help you earn LEED™ credits.
Visit aogreenworks.com for detailed information.
americanolean.com
888-AOT-TILE
© 2013 American Olean (2/13) SSAOMIRASOL