This charming wallhanging celebrates winter with whimsical snowmen,

© 2012 Janet Page Kessler for Benartex, LLC
This charming wallhanging celebrates winter with whimsical snowmen,
cardinals and cheery snowIlakes. A pre-printed panel makes it easy and
fun to create-the perfect holiday gift for someone special.
Uses Cheryl Haynes Snowfolk collection.
FINISHED SIZE: 38" X 56"
CUT PIECES VIA WOF
A
1 Panel
Snowfolk Panel
2270-55 Blue/Multi (24")
Trim to 22-1/2" x 42-1/2".
B
Snowfolk Plaid
2274-10 Red
1/2 YD
(2) 1-1/2" x 42-1/2" strips.
(14) 3-1/2" x 6-1/2" rectangles.
C
Snowfolk Allover
2271-44 Green
1/2 YD
(4) 3-1/2" x WOF strips, subcut
(44) 3-1/2" squares.
D
Snowfolk Flakes
2275-55 Blue
1 YD
1. AB UNIT: Sew (1) B 1-1/2" x 42-1/2" strip to each
side of (1) A panel. Trim to 24-1/2" x 42-1/2".
(8) 3-1/2" x 6-1/2" rectangles.
(4) 3-1/2" squares.
(2) 4-1/2" x 38-1/2" strips.
ADD LEFTOVER STRIPS BELOW
(3) 4-1/2" x WOF strips + LEFTOVER *.
E
Ice Cubes
2276-55 Blue
1/2 YD
UNIT ASSEMBLY
(5) 2-1/4" x WOF strips; BINDING.
*SEW STRIPS VIA SHORT ENDS, THEN GO TO BORDER ASSEMBLY | WOF=WIDTH OF FABRIC
2. FLYING GEESE UNITS: Take (1) C 3-1/2" square and
draw a diagonal line on wrong side. Next place C square
on left hand side of (1) B 3-1/2" x 6-1/2" rectangle,
right sides together and sew on diagonal line (2a.).
Flip C lower right hand corner up to B upper left hand
corner. Press. Trim excess fabric on reverse side to 1/4".
(2b.). Repeat steps for right hand corner (2c.). Trim to
3-1/2" x 6-1/2". Make 14 BC units. Set aside.
2a.
C
B
2b.
C
1/
4"
CUT
IM
QTY
TR
SAMPLE KEY/SKU
B
2c. MAKE 14
C
B
C C
3. MAKE 8
D
C
3. CD UNITS: Similar to BC unit assembly make CD
units using C 3-1/2" squares and D 3-1/2" x 6-1/2"
rectangles. Trim to 3-1/2" x 6-1/2". Make 8 CD units.
BORDERS ASSEMBLY
4. Using D 3-1/2" squares, BC and CD units assemble
SIDE and TOP/BOTTOM BORDERS as shown below:
QUILT DIAGRAM
D
SIDE BORDER: TRIM TO 371/2" x 4271/2", MAKE 2.
L
TOP BORDER
BC
BC
L
CD
BC
BC
BC
Sew one SIDE BORDER to each side of A panel.
CD
D
NOTE PROPER ROTATION AND PLACEMENT OF SIDE BORDERS.
A
TOP/BOTTOM BORDER: TRIM TO 371/2" x 3071/2", MAKE 2.
CD
L
L
D
BC
BC
CD
Sew one TOP/BOTTOM BORDER to top and bottom of A panel.
NOTE PROPER ROTATION OF TOP/BOTTOM BORDERS.
B
L
L
SIDE BORDER
B
L
L
L
D
SIDE BORDER
For D border measure width and length of quilt top first
to ensure strip cutting sizes. Below are our sizes.
5. D BORDER: Sew (1) D 4-1/2" x (48-1/2") strip to each
side of quilt top. Then sew (1) D 4-1/2" x 38-1/2" to top
and to bottom of quilt top.
FINISHING Cut batting and backing 3" larger than top
on all sides. Layer backing, batting and top together and
baste or pin. When quilting is completed, trim excess
batting and backing. Bind as usual.
FINISHED QUILT SIZE: 38" W X 56" L
Note: If this Benartex pattern is included in a kit,
any questions about the kit should be addressed
to the vendor from whom you bought it.
L
BOTTOM BORDER
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T: 212-840-3250 • WWW.BENARTEX.COM