Slingshot Floor Mats Installation Instructions. Required tools. Scribing tool Small Philips screwdriver 1/16 drill bit & drill (optional) Denatured alcohol Instructions. 1) Start with the driver’s side. Adjust seat all the way backwards to the rearmost position. Lay mat down and position as needed. See image #1 and #2 2) Use scribe or any sharp item to mark hole locations. See image #3. 3) Screw in supplied snaps with Phillips screwdriver at scribed location marks. (Optional, you may pre-drill 1/16 holes for easier snap mounting) 4) Passenger’s side. Check alignment and placement of forward mat. See image #4. 5) Clean forward mat placement area with denatured alcohol. 6) Peal protective plastic from adhesive and firmly press into location. 7) The bottom passenger mat sets in place. **Red mats are known for fading. No warranty against fading on red mats.** Floor mats are marine quality weather proof mats that can be vacuumed and washed with mild soap. Patent Pending. Cycle Springs Powers 29703 US HWY 19N, Clearwater, FL 33761 Ph: 727-771-1211 CycleSpringsOnline.com
© Copyright 2024