TECHNICAL INFORMATION SHEET MATERIA ROMANA FINITURA INFORMATION ON USAGE Name MATERIA ROMANA FINITURA Description Semi-covering finish. Suitable to protect surfaces created with Materia Romana plaster and exalt the chromatic streaking and grains typical of the “Roman travertine” effect Professional use. UNI 8681 classification One-pack, physical drying, acrylic, matt paint finishing coat, dispersed in water (B4.C.O.A.2.FA) Intended use Indoors / Outdoors Suitable substrates Concrete plaster, lime-based paint and plaster, painted plaster, exposed reinforced concrete, precast concrete panels and elements, fibre cement and brick CHARACTERISTICS Composition/appearance Physical state: liquid Type of resin/binder: acrylic (UNI 8681: FA) Appearance:matt finish Dimensional properties Bulk volume: 1310 ± 50 g/l Performance characteristics Solids content by weight: 61 ± 2% pH: 8.,5 – 9 Colours available Base white semi-covering and Materia Romana Colour Card. It can be coloured by tintometer. APPLICATION Environmental conditions Ambient temperature: min +10°C, max +40°C Relative ambient humidity: max 80% Equipment Brush (Klimt Brush), short-haired wool roller (Magritte Roller) Dilution Diluent type: water Dilution: first coat 25-30% = 250–300 ml per litre of product second coat (when the finish is coloured) 30-50% = 300-500 ml per litre of product Application procedure For a white finish apply one coat of MATERIA ROMANA FINITURA MA00 (white semi-covering) over the entire surface. For coloured finishes apply one coat of MATERIA ROMANA FINITURA MA00 (white semicovering) trying not to enter the grains. Apply a second coat in the desired dye waiting 4 hours between coats over the entire surface and then removing the excess with a sponge Drying or curing time at ≈ 23°C On surfaces: 4 hours Coverage (with two coats) 7-8 m2/l Recommended use per m2: 140 ml Coverage per package (5 l): 35-40 m2 approx. Coverage will vary depending on absorption of the substrate Overpainting Compatibility with other products: compatible with all solvent free products TECHNICAL INFORMATION SHEET MATERIA ROMANA FINITURA Warning advice for the user STORAGE See safety sheet Acceptability of odour Packaging Odourless 1–5l Storage Minimum and maximum temperatures: +5°C +30°C (in cool, frost-free storage) Stability in original containers: 365 days SAFETY INFORMATION Classification in relation to risk Requires risk labelling according to: Legislative Decree (DL) 52 dated 3 February 1997 amended by DL 90 dated 25 February 1998, Ministry of Health Decrees (DMS) dated 4 April 1997, 28 April 1997, DL 285 dated 16 July 1998, EU Directive 1999/45/EC dated 31 May 1999, DMS dated 7 July 1999, 10 April 2000, 26 January 2001 and 11 April 2001, EU Directives 2001/58/EC, 2001/59/EC, 2001/60/EC and subsequent amendments Identification of waste material type Complies with EEC decision 2000/532/EC amended by: 2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent amendments Plastic containers: These can be classified as code 150102. Potentially treatable as urban waste according to individual local authority regulations. Metal containers: These can be classified as code 150104. Potentially treatable as urban waste according to individual local authority regulations. If undried paint remains in the containers, these can be classified as code 080112 Dispose of in accordance with local regulations Please note: This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application. Company with quality management system certified UNI EN ISO 9001 Issue 09-2014 IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy Phone +39 0541 815811 – Fax +39 0541 815815 – www.metropolis-ivas.com
© Copyright 2024