for a clearer complexion

FREQUENTLY ASKED
QUESTIONS
What causes Acne?
Acne is a condition of the sebaceous hair
follicle. The hair follicles, or pores, in your
skin contain sebaceous glands. These glands
make sebum, which is an oil that lubricates
hair and skin. Normally, sebum travels through
the hair follicle to the skin surface. With acne,
sebum is trapped, clogging the follicle.
Bacteria that seems to cause most acnes is
called Propionibacterium acnes (P.acnes)
and is present in everybody’s skin, usually
lodged in the hair follicle. The clogged follicle
becomes a breeding ground for bacteria.
When the sebaceous gland gets clogged, and
sebum builds up inside the follicle, P. acnes
multiply rapidly resulting in acne.
Why is a combination of blue and red light
used?
Research has shown that blue light kills P.
acnes bacteria while red light helps reduce
inflammation. How often should I use the product?
We recommend a daily treatment of 8½
minutes per treatment area.
When will I see results?
You should see a positive change within 4
weeks. Daily treatment is recommended for
8–12 weeks. After this, use in line with any
continued occurrence or new outbreaks.
Yes, but be careful to avoid looking directly at the
LEDs. If you glance accidentally at the LEDs, no
harm will occur. We recommend keeping your
eyes closed during treatment to reduce the effects
of glare. If you suffer with any eye disorders then
please consult a specialist before use.
The LITE2 unit and its power adaptor together
constitute a Medical Electrical System as
defined in EN60601-1:2006
In accordance with the Medical Devices 93/42/
EEC as amended by Directive 2007/47/EC, this
product has a declared life of 5 years.
Occular Safety
The Dezac LITE2 has been tested to EN 62471:
2008 and has been classified as non hazardous.
S PE C I FI C AT I ON OF
S KI N CL E AR L I G HT
MODEL NUMBER: LITE2
Light Source
Output Frequency
Input
Output
Can I use it with my usual anti-spot cream/
lotion?
• The battery may be flat - check battery
indicator lights.
• The unit will not turn on while in the charging
dock. Remove the unit to proceed with
treatment.
Read instructions carefully before use.
Denotes manufacturer of the device.
Denotes date of manufacture.
100–240V AC
6V DC 100mA
E NVI R ONME NT
Operating Storage &
Transport
Temperature Humidity
Atmospheric Pressure
Temperature
Humidity
This product is intended to contact the user in
normal use.
D I SPO SAL
The Waste of Electrical and Electronic
Equipment (WEEE) Directive (2002/96/EC)
has been put in place to recycle products
using best available recovery and recycling
techniques to minimise the impact on the environment,
treat any hazardous substances and avoid the
increasing landfill. The unit and adapter are classed
as Electrical or Electronic equipment so please
ensure that at the end of the life of this control unit and
battery, they are disposed of in the correct manner in
accordance with local authority requirements. They
must NOT be disposed of with household waste.
17 LEDs
Blue Light - 415nm
Red Light - 650nm
The peak wavelengths of light used are outside
those that would cause damage to the skin.
0–35 degrees Celsius
10%–60% RH
700–1060 hPa
-20–50 degrees Celsius
5%–90% RH
This product conforms to the Medical
Devices 93/42/EEC as amended by
Directive 2007/47EC.
This product is intended for indoor use only.
Please refer to the enclosed leaflet.
Will I Get a Sunburn or Skin Cancer?
Why won’t my unit turn on?
0120
D E C L AR AT I ON OF E MC
COMPL I ANCE
POWER ADAPTER: 1-ADKS-6-10-WH
KSAS7R50600100D5
The SKINCLEAR LIGHT should be applied to
clean, dry skin. Between treatments you can
use your usual anti-spot cream lotion.
S AFE T Y SYMBO LS
Is it safe for use around the eyes?
CU S T OMER CARE
If you have any questions, or if you experience
any difficulties with this product, please call our
Rio Careline on 01242 702345
or email us at: [email protected]
To register your two year guarantee online visit:
www.riobeauty.com/warranty_online.htm
Rio, Dezac and SKINCLEAR LIGHT are trademarks
of The Dezac Group Ltd 2012
Manufactured by The Dezac Group Ltd. Dezac
House, Montpellier Street, Cheltenham, GL50 1SS
www.riobeauty.com
1-IN-LITE2-UK/1.3
FREQUENTLY ASKED
QUESTIONS
What causes Acne?
Acne is a condition of the sebaceous hair
follicle. The hair follicles, or pores, in your
skin contain sebaceous glands. These glands
make sebum, which is an oil that lubricates
hair and skin. Normally, sebum travels through
the hair follicle to the skin surface. With acne,
sebum is trapped, clogging the follicle.
Bacteria that seems to cause most acnes is
called Propionibacterium acnes (P.acnes)
and is present in everybody’s skin, usually
lodged in the hair follicle. The clogged follicle
becomes a breeding ground for bacteria.
When the sebaceous gland gets clogged, and
sebum builds up inside the follicle, P. acnes
multiply rapidly resulting in acne.
Why is a combination of blue and red light
used?
Research has shown that blue light kills P.
acnes bacteria while red light helps reduce
inflammation. How often should I use the product?
We recommend a daily treatment of 8½
minutes per treatment area.
When will I see results?
You should see a positive change within 4
weeks. Daily treatment is recommended for
8–12 weeks. After this, use in line with any
continued occurrence or new outbreaks.
D E C L AR AT I ON OF E MC
COMPL I ANCE
Please refer to the enclosed leaflet.
The LITE2 unit and its power adaptor together
constitute a Medical Electrical System as
defined in EN60601-1:2006
In accordance with the Medical Devices 93/42/
EEC as amended by Directive 2007/47/EC, this
product has a declared life of 5 years.
Occular Safety
The Dezac LITE2 has been tested to EN 62471:
2008 and has been classified as non hazardous.
S PE C I FI C AT I ON OF
S KI N CL E AR L I G HT
MODEL NUMBER: LITE2
Light Source
Output Frequency
17 LEDs
Blue Light - 415nm
Red Light - 650nm
Will I Get a Sunburn or Skin Cancer?
POWER ADAPTER: 1-ADKS-6-10-WH
KSAS7R50600100D5
The peak wavelengths of light used are outside
those that would cause damage to the skin.
Input
Output
Can I use it with my usual anti-spot cream/
lotion?
The SKINCLEAR LIGHT should be applied to
clean, dry skin. Between treatments you can
use your usual anti-spot cream lotion.
Why won’t my unit turn on?
• The battery may be flat - check battery
indicator lights.
• The unit will not turn on while in the charging
dock. Remove the unit to proceed with
treatment.
S AFE T Y SYMBO LS
Is it safe for use around the eyes?
Yes, but be careful to avoid looking directly at the
LEDs. If you glance accidentally at the LEDs, no
harm will occur. We recommend keeping your
eyes closed during treatment to reduce the effects
of glare. If you suffer with any eye disorders then
please consult a specialist before use.
100–240V AC
6V DC 100mA
E NVI R ONME NT
Operating Storage &
Transport
Temperature Humidity
Atmospheric Pressure
Temperature
Humidity
0–35 degrees Celsius
10%–60% RH
700–1060 hPa
-20–50 degrees Celsius
5%–90% RH
for a clearer complexion
0120
This product conforms to the Medical
Devices 93/42/EEC as amended by
Directive 2007/47EC.
This product is intended for indoor use only.
Read instructions carefully before use.
Denotes manufacturer of the device.
Denotes date of manufacture.
This product is intended to contact the user in
normal use.
D I SPO SAL
The Waste of Electrical and Electronic
Equipment (WEEE) Directive (2002/96/EC)
has been put in place to recycle products
using best available recovery and recycling
techniques to minimise the impact on the environment,
treat any hazardous substances and avoid the
increasing landfill. The unit and adapter are classed
as Electrical or Electronic equipment so please
ensure that at the end of the life of this control unit and
battery, they are disposed of in the correct manner in
accordance with local authority requirements. They
must NOT be disposed of with household waste.
CU S T OMER CARE
If you have any questions, or if you experience
any difficulties with this product, please call our
Rio Careline on 01242 702345
or email us at: [email protected]
To register your two year guarantee online visit:
www.riobeauty.com/warranty_online.htm
Rio, Dezac and SKINCLEAR LIGHT are trademarks
of The Dezac Group Ltd 2012
Manufactured by The Dezac Group Ltd. Dezac
House, Montpellier Street, Cheltenham, GL50 1SS
www.riobeauty.com
1-IN-LITE2-UK/1.3
for a clearer complexion
S KI NC L E A R L I G HT
WARNINGS
• Please read all instructions thoroughly
and retain for future reference.
• To prevent cross contamination, this product is
not recommended for multiple users.
• Avoid direct contact with eyes.
• Do NOT look directly into the light.
• Avoid staring at the light when placing the unit
onto the skin. We recommend eyes are closed
when treating around the eye region.
• NOT for use on or by children under 12
years old. Not for use on or by children
between 12 and 17 years old without
parental supervision.
• This appliance is not intended for use by
persons, including children, with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instructions concerning use of the
appliance by a person responsible for their
safety.
• Do NOT attempt to drive or use any other
potentially hazardous equipment whilst using
your SKINCLEAR LIGHT.
• Do NOT dismantle the unit or power adapter,
there are no user serviceable parts inside. In
the event of a fault, Rio or its service agent
or a similarly qualified person must replace it
in order to avoid a hazard.
• The product can be disconnected from the
mains supply by unplugging the power
adapter. Please ensure that the power
adapter is positioned so that it is easily
accessible.
• Do NOT immerse the unit in water. Wiping
with a damp cloth is sufficient to clean.
• Only use power adapter supplied with this
product.
C ONT RA I N D I C A T IO N S
Regardless of age, acne can be a
problem. The Rio SKINCLEAR LIGHT
uses blue and red light technology
to help manage mild to moderate
acne. The blue light kills the primary
bacteria involved in acne, (P. acnes)
while the red spectrum light helps
reduce inflammation.
C OMPONENT S
• NOT suitable for people who are photosensitive
or who have photosensitive skin. Common
medications can cause photosensitivity so if
you are on any medication you should check for
photosensitivity warnings and if in any doubt
consult your doctor.
Before using for the first time, remove the light
display label from the treatment head.
The battery level indicator lights around the ON/
OFF button show the status of the battery. One
light is low, four is fully charged.
STEP 1
Thoroughly cleanse your face.
Gently place the treatment
head onto the skin.
Note: When the unit is fully charged it will
automatically enter a sleep mode and the
battery level indicator lights will go out.
STEP 2
To start the treatment, briefly
press and hold the ON/OFF
button until the treatment
lights illuminate.
STEP 1
To charge, connect the power
adapter into the charging dock
and plug into the mains.
2
3
8½
4
STEP 3
STEP 2
5
Hold in position for 8½
minutes.
Place the unit in the charging
dock. It takes about 60 minutes
to fully recharge.
BATTERY LEVEL INDICATION
IN USE
6
1
2
3
4
5
6
Treatment lights
Treatment head
Battery level indicator lights
ON/OFF button
Power adapter
Charging dock
S KI NC L E A R L I G HT
WARNINGS
C ONT RA I N D I C A T IO N S
IMPORTANT: Charge the unit for 1 hour
before using for the first time.
TREATMENT
1
• NOT suitable for people who are photosensitive
or who have photosensitive skin. Common
medications can cause photosensitivity so if
you are on any medication you should check for
photosensitivity warnings and if in any doubt
consult your doctor.
• Please read all instructions thoroughly
and retain for future reference.
• To prevent cross contamination, this product is
not recommended for multiple users.
• Avoid direct contact with eyes.
• Do NOT look directly into the light.
• Avoid staring at the light when placing the unit
onto the skin. We recommend eyes are closed
when treating around the eye region.
• NOT for use on or by children under 12
years old. Not for use on or by children
between 12 and 17 years old without
parental supervision.
• This appliance is not intended for use by
persons, including children, with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instructions concerning use of the
appliance by a person responsible for their
safety.
• Do NOT attempt to drive or use any other
potentially hazardous equipment whilst using
your SKINCLEAR LIGHT.
• Do NOT dismantle the unit or power adapter,
there are no user serviceable parts inside. In
the event of a fault, Rio or its service agent
or a similarly qualified person must replace it
in order to avoid a hazard.
• The product can be disconnected from the
mains supply by unplugging the power
adapter. Please ensure that the power
adapter is positioned so that it is easily
accessible.
• Do NOT immerse the unit in water. Wiping
with a damp cloth is sufficient to clean.
• Only use power adapter supplied with this
product.
CHARGING
Regardless of age, acne can be a
problem. The Rio SKINCLEAR LIGHT
uses blue and red light technology
to help manage mild to moderate
acne. The blue light kills the primary
bacteria involved in acne, (P. acnes)
while the red spectrum light helps
reduce inflammation.
C OMPONENT S
The unit will automatically
power off after 8½
minutes.
When the unit powers off, move to the next
treatment area and repeat steps 2–3.
STEP 4
When the battery level is low,
a single light will flash to
indicate recharging is required
and that at least one treatment
is left.
If no lights illuminate when the
ON/OFF button is pressed, it
indicates the battery is flat and
needs to be recharged.
CHARGING
IMPORTANT: Charge the unit for 1 hour
before using for the first time.
To switch the unit off at any
time, press the ON/OFF
button.
After use, clean the treatment
head with an antiseptic wipe.
You can continue with your normal beauty
routine immediately after treatment.
TREATMENT
Before using for the first time, remove the light
display label from the treatment head.
The battery level indicator lights around the ON/
OFF button show the status of the battery. One
light is low, four is fully charged.
STEP 1
Thoroughly cleanse your face.
Gently place the treatment
head onto the skin.
Note: When the unit is fully charged it will
automatically enter a sleep mode and the
battery level indicator lights will go out.
STEP 2
To start the treatment, briefly
press and hold the ON/OFF
button until the treatment
lights illuminate.
1
STEP 1
To charge, connect the power
adapter into the charging dock
and plug into the mains.
2
3
8½
4
STEP 3
STEP 2
5
Place the unit in the charging
dock. It takes about 60 minutes
to fully recharge.
BATTERY LEVEL INDICATION
IN USE
6
1
2
3
4
5
6
Treatment lights
Treatment head
Battery level indicator lights
ON/OFF button
Power adapter
Charging dock
When the battery level is low,
a single light will flash to
indicate recharging is required
and that at least one treatment
is left.
If no lights illuminate when the
ON/OFF button is pressed, it
indicates the battery is flat and
needs to be recharged.
Hold in position for 8½
minutes.
The unit will automatically
power off after 8½
minutes.
When the unit powers off, move to the next
treatment area and repeat steps 2–3.
STEP 4
To switch the unit off at any
time, press the ON/OFF
button.
After use, clean the treatment
head with an antiseptic wipe.
You can continue with your normal beauty
routine immediately after treatment.