1. sports
2. hunting and shooting

INTRODUCTION
SILVER STAG was founded in a garage by a couple of sportsmen who enjoyed turning old files
and saw blades into hunting, fishing, and camping knives. The original knives were modest
and rustic, but functioned exceptionally well in the field. It didn’t take too long
for demand and customer reorders to slowly but consistently increase. The
hobby turned into a business and the SILVER STAG brand was launched in 1998.
Over the past 16 years ago, we have been extremely focused on improving
our product quality and selection. The company has come a long way since the “Garage Days”, and the team at
SILVER STAG has worked hard to meticulously and consistently build additional value into the product line.
For example, not too long ago one of our first customers returned a knife for a tune-up. This particular knife was
one of the original knives manufactured back in my garage. The production crew took a look at the knife and
could not believe it was a SILVER STAG. The quality was rough and the knife was not very attractive. Fortunately
the customer included a note that explained how much he cherished his knife. The knife had been with him on every hunt over
the past 15 years. It consistently performed excellent in the field and he planned on passing it down to his son one day. This
was a knife that only two people could truly appreciate; the owner of the knife, and the founder who built it.
In-house CNC
plasma machine
This one knife made me stop and think about how far we had grown and evolved over the years. It made me appreciate my
team’s commitment and dedication required to consistently improve our production output, while at the same time, building
a higher quality product. It’s taken an incredible amount of hard work and dedication to build tens of thousands of
knives for our customer base over the years while consistently improving the value of our product line. Customer
reorders and their testimonials continue to drive us.
We are proud that we have never strayed from our original hands on approach to manufacturing. Even today,
every SILVER STAG Knife manufactured is ground, polished, assembled, shaped, and sharpened “Free Hand”.
While no two finished knives will ever look exactly alike, all SILVER STAG Knives share certain features that
make them extraordinary field tools. To start, the blades are designed by sportsmen and are exceptionally
practical. The blades are manufactured exclusively from the highest quality domestically produced High Carbon
Steel. Authentic North American antler is built into every design. The finished knives are stunningly attractive,
incredibly functional, and extremely durable. SILVER STAG is the only brand in the world manufactured exclusively
by hand from domestically produced high carbon tool steels and North American shed antler, including authentic hand forged
Damascus steel blades.
In summary, the team at SILVER STAG has taken a step back in time when high quality tools were handmade by proud
Americans dedicated to producing quality products at a fair price. This tradition lives on at the SILVER STAG manufacturing
facility located in Blaine, Washington. Thank you for supporting our small company and American manufacturing. We sincerely
appreciate your business.
Every blade is hollow ground
free hand.
PRODUCTION PROCESS
We use three types of High Carbon Tool Steel to manufacture our exclusive blade designs; D2, 1095,
and 15N20, (Steel specifics can be reviewed above each product series listing). Our steel is purchased
directly from American Steel Mills. The blades are profiled by the company’s in-house CNC Plasma
Cutting machine. The blade blanks are then surface ground to remove the thin layer of scale on the
raw steel. The remainder of the manufacturing process is performed “Free Hand”. Each and every
blade is hollow ground by hand under Beta belt grinder machines. The hollow grinding process is an
art that takes a keen eye and steady hands. The grind plays a critical role in the overall functionality
of the blade and will impact how sharp you can get the edge. The blades are polished and heattreated to a 58 to 62 Rockwell hardness. Every SILVER STAG knife has North American shed antler built
into the design. The Deer, Elk, Moose, or Caribou antler is selected based on the horns size, shape,
curvature, weight, color, and texture. Pins and epoxy adhesive permanently bond the antler and blade
together. Every antler handle is shaped so that the knife feels comfortable to hold and use. The blades
and handles are polished under buffing wheels, then each knife is sharpened by hand.
(Please visit The SILVER STAG website to take a video tour of our production process).
Moose antler scale
production for Slab Series
PRODUCTION/MERCHANDISING
Every knife ships in its own individual box, accompanied with a high quality leather sheath and limited
lifetime warranty card. UPC stickers are available upon request. We offer a SILVER STAG merchandising
display fixture to our new dealers. The display is very attractive, saves counter space, and has proven
to sell incremental product. The display holds 12 to 16 knives and contains a back door lock. If a new
dealer orders 13 or more knives, we sell the display fixture at our cost, and subsidize it by providing
our new dealer with a no charge knife that can be sold for approximately the same cost as the display
purchase price, (Fixture Dimensions: H =24”, W = 15”, D = 7” ). Consumer brochures, Logo plaques,
and antler display stands are available for glass case merchandising.
DISTRIBUTION
SILVER STAG knives are distributed through high quality sporting good, cutlery, and specialty stores.
You will not find SILVER STAG products sold in big box or mass merchant discount chains. Our dealers
are encouraged to sell at our MSR pricing, and adhere to our MAPP pricing policy. Our Wholesale
Accounts representing SILVER STAG are required to share our MAPP pricing with their dealer base.
The SILVER STAG line is an exceptional value. While many custom knife makers charge three to five
hundred dollars for comparable or inferior products, the majority of the SILVER STAG line retails in
the $80 to $160 price range. SILVER STAG knives do not need to be discounted to sell through. Dealers
that carry a good selection, communicate the lines features to their customers, and consistently
restock what sells through, are always successful with the line.
Locking merchandising store fixture
WHAT’S NEW
We continue our tradition of improving our product selection, product quality, and
production infrastructure. Prior to rolling out a new design, we take into consideration recent
customer demand and feedback. In addition, we try to be creative and build additional
designs for our most popular product series. And occasionally we design something outside
of the box that we really like. Over the last few months, we have rolled out a handful of new
designs that are highlighted in one of the following Product Series. We have also added a
Steak Knife set to our new “Chuck Wagon” series, (formally Butcher Series).
New side mount Large Folder Sheath
We recently made some improvements to a few of our existing styles. For example we
have replaced our brass guards with stain resistant steel that will eliminate oxidation and
maintenance. We have also improved our leather sheaths and added a couple new sheath
designs to our larger folding Knives. We have replaced our folding brass pivot pins with
new stainless steel tension adjusting barrel pins. We are also working on a new series using
“Powder Steel” (XHP), with domestic exotic hard wood handles. This is a work in progress
and we will keep you updated as the new line takes shape.
To increase our production infrastructure we have recently purchased a new CNC Plasma
cutting machine that will increase our raw blade profiling speed. We are also planning a
factory remodel that will add 3,000 square feet to our manufacturing facility.
Detailed finishing work
PRODUCT LINE SUMMARY
The SILVER STAG Product line is made up of over 60 different blade designs that range from
2” to over 21” in length. Every design is categorized into one of ten series, and each series is
categorized by the steel, antler, and construction method used in the manufacturing process.
These Series are; CROWN, DAMASCUS, TOOL STEEL, SLAB, ELK STICK, POINT, SCRIMSHAW,
POCKET, CHUCK WAGON, and SWORD.
Manufacturing our brass hilts
A finished Notch Folder
D2 CROWN SERIES - D2 steel is an air hardening, high carbon, and high chromium tool steel possessing extremely high wear resisting properties. D2 steel
is commonly used in the machining industries to manufacturer dies and punches that repeatedly cut other materials. D2 Steel is extremely tough and durable!
The high chromium content provides good corrosion resistance, (but it can and will rust if it is not properly taken care of). The blades are heat treated to a
62 Rockwell hardness and are guaranteed to retain their factory edge for extended periods of heavy use. When it does come time to re-sharpen, the blades
will hone to a razor edge. There is only one mill is the U.S. that manufactures D2 steel. In our professional opinion, there is nothing better than D2 steel. The
following Crown Series features North American Deer and Elk antler crown/burr handles.
Small Gamer (SG3.0)
Blade L = 3”
Overall = Approx. 7”
Sharp Forest (SF3.75)
Blade L = 3.75”
Overall = Approx 8”
Deer Skinner (DS4.5)
Blade L = 4.5”
Overall = Approx 9”
Bird & Trout (BT4.0)
Blade L = 4”
Overall = Approx 8”
Crown Skinner (CS3.5)
Blade L = 3.5”
Overall = Approx 8.75”
Big Gamer (BG4.0)
Blade L = 4”
Overall = Approx 9”
Cascade Hunter (CH4.0)
Blade L = 4”
Overall = Approx 9”
Bullnose Crown (BNC4.75)
Blade L = 4.75”
Overall = Approx 10”
Mountain Edge (ME5.25)
Blade L = 5.25”
Overall = Approx 11”
Deep Valley (DV6.0)
Blade L = 6”
Overall = Approx 11.5”
Alaskan Fillet (AF9.0)
Blade L = 9”
Overall = Approx 15”
Pacific Bowie (PB8.0)
Blade L = 8.25”
Overall = Approx 14”
Alaskan Camper (AC11.0)
Blade L = 11”
Overall = Approx 19”
(Upgraded laced sheath w/ shoulder belt / Great Pig Sticker)
T-Hawk Ax (THA4.5)
Head W = 4.5”
Overall = Approx 12”
DAMASCUS SERIES - SILVER STAG Damascus steel is manufactured by forge welding multiple layers of
high carbon steels into a solid block called a billet, (SILVER STAG contains 1095 & 15N20 high carbon tool steels).
The billet is folded and re-welded several times to produce layers, (SILVER STAG Damascus = 150 to 250 layers).
Patterns are created by manipulating the steel during the forge welding process, (SILVER STAG offers a random
and twist pattern). The blades are hand profiled from the layered steel billet block. The combination of layered
hard and soft steels creates blade flexibility, toughness, and produces invisible serrations on the edge that aid
cutting. SILVER STAG Damascus blades are extremely functional and durable. The nickel in the 15N20 steel
keeps corrosion at bay, but the blades can and will rust if they are not occasionally oiled. An up-graded, hand
laced leather sheath is included with every style.
Crown Twist (DCT3.5)
Blade L = 3.5” / Overall = 8.5”
Twist Pattern – Drop Point with Elk or Deer
One of the best skinning knives you’ll ever own.
Crown Twist Elk Stick (DCT3.5ES)
Blade L = 3.5” / Overall = 8.5”
Twist Pattern – Drop Point with Elk Beam
(2010 NRA Knife of the Year Design)
Stag Twist (DST2.7)
Blade L = 3.5” / Overall = 6.75”
Twist Pattern – Full Tang Slab with Moose or Elk antler
An excellent small field knife.
GUT Twist (GT4.0)
Blade L = 4” / Overall = Approx 7.5”
Twist Patter – Full Tang with Elk antler
After 10 years of requests, here it is!
Swoop Crown (DSC2.5)
Blade L = 2.5”/ Overall = 7”
Random Pattern - Whitetail crown handle.
A great patch knife.
Random Crown (DPRC2.6)
Blade L = 3” / Overall= 7”
Random Pattern - Deer Antler
Perfect for small game.
Point Random (DPR2.6)
Blade L = 3” / Overall = 7”
Random Pattern - Elk or Deer Antler Point
Perfect for small game.
Damascus Dagger (DDG5.0)
Blade L = 5.0” / Overall = Approx 7.5”
Twist Patter - Full Tang with Elk antler
For bikers and highlanders!
Field Slab (DFS3.1)
Blade L= 3.1” – Overall = 7.5”
Twist or Random Pattern - Elk or Moose antler
A fantastic full tang deer knife.
Straight Back (DSB5.0)
Blade L = 5” / Overall = 10”
Twist Pattern - Deer or Elk Antler
A great boning knife.
Random Raindrop (DRT4.0)
Blade L = 4” / Overall = 9”
Twist Pattern - Deer or Elk Antler
A unique and classy design.
Happy Camper (DHC6.0)
Blade L = 6” / Overall – 10.5”
Random Pattern – Full Tang with Elk antler scales.
The ultimate camp knife.
TOOL STEEL SERIES -1095 High Carbon Tool Steel is also referred to as, “Cutlery Spring
Steel”, and is well known for its use in manufacturing commercial saw blades. This extreme
carbon steel hones to a razor sharp edge (better than any stainless steel), retains its edge
(better than most stainless steels), and is easier to sharpen, (compared to stainless steel). This
steel is often used to manufacture car springs, rail road spikes, and hand tools. SILVER STAG
1095 blades are heat treated to a 58 Rockwell Hardness. Traditional jewelling is applied to the
blades. This process involves taking a wire mess bit and pressing down on the blade with a drill
press to create swirls on the blade. The indented swirl pattern on the blade surface assists the
blade retain oil for corrosion protection. This is a classic and traditional line.
SMALL GUT (SSG3.0)
Blade L = 3”
Overall = Approx 7”
SKINNER (SSS4.5)
Blade L = 4.5”
Overall = Approx 10”
GUTTER (SSG4.5)
Blade L = 4.5”
Overall = Approx. 10”
SHORT BOWIE (SSB8.0)
Blade L = 8”
Overall = Approx. 14”
FILLET (SSF7.0)
Blade L = 7”
Overall = Approx. 14”
BIG BOWIE (SSB10.0)
Blade L = 10”
Overall = Approx. 16”
New
DROP NOSE (SSDN3.75)
Blade L = 3.75”
Overall = Approx. 8.5”
COMBO PACK (SSCO63)
HUNTER / Blade L = 6” + GUT / Blade L = 3”
Two Knives in Piggy back Sheath
ELK STICK SERIES - Features our popular blade designs manufactured with the “beam”
of the elk horn. The finished knives are clean, balanced, and easy to control. This section of
the elk antler creates a classy, traditional, and functional finished look and feel. This Series
features both D2 and 1095 High Carbon Steel blades.
GAMER (SSS3.0ES)
1095 Blade L = 3”
Overall = Approx 7”
Sharp Forest (SF3.75ES)
D2 Blade L = 3.75”
Overall = Approx 8”
Bird & Trout (BT4.0ES)
D2 Blade L = 4”
Overall = Approx 8”
Big Gamer (BG4.0ES)
D2 Blade L = 4”
Overall = Approx 9”
Skinner (SSS4.5ES)
1095 Blade L = 4.5”
Overall = Approx 10”
Bullnose (BN4.75ES)
D2 Blade L = 4.75”
Overall = Approx. 10”
Deep Valley (DV6.0ES)
D2 Blade L = 6”
Overall = Approx 11.5”
Frontier Fighter (FF7.0ES)
D2 Blade = 7”/ Overall = 12”
Brass end cap / sandblasted finish
Weight approx. 10oz.
Pouch sheath vertical or horizontal wear
New
THE SQUIRREL (TS2.0)
Blade L = 2”
Overall = Approx. 6.5”
Guide Combo Pack (GCPDVSG)
D2 Blade one = 6”, Blade two = 3”
(Styles DV6.0 & SG3.0 in piggy back sheath)
SLAB SERIES - Features D2 Steel Manufactured in Full-Tang construction. Elk or Moose
antler slabs are cut, polished, and pinned through the blade tang to give the knife superb
control and balance. The blades are heat treated to a 60 Rockwell Hardness. The Slab Series
Designs are guaranteed to provide the hardcore sportsmen with one of most practical and
durable knives ever used. These are a “must have” for the professional sportsman!
Whitetail Caper (WC3000)
Blade L = 2.75”/ Overall = 6.75”
Elk Skinner (ES4000)
Blade L = 3.25” / Overall = 7.5”
Corky Cutter (CC2.75)
Blade = 2.75” / Overall = 7.5”
Bullnose Slab (BNS3.5)
Blade L = 3.5” / Overall 7.75”
Smith Slab (SS4.0)
Blade L = 4” / Overall = 8.25”
Gut Slab (GS2.75)
Blade = 2.75” / Overall = 7.5”
Schnoor Hunter (SH4.0)
Blade = 4” / Overall = 8.75”
Backwoods Pro (BWP3.0)
Blade L = 3” / Overall = Approx 7”
Drop Neck (DN3.25)
Blade = 3.25” / Overall = 8”
New
Beef Eater (BE4.0)
Blade = 4” / Overall = 8”
FISH & GAMER (FG4.25)
Blade = 4.25” / Overall = 8.75”
New
SIDEKICK PRO (SK6.0)
Blade = 6” / Overall = 11.75”
New
PRO SLAB COMBO PACK (PSCP63)
D2 Blade one = 6” , Blade two = 2.75”
(Styles SK6.0 & CC2.75 in piggy back sheath)
POCKET SERIES - After two years of design work, we are proud of our handmade folding Knives that feature our signature D2 steel blades. The blades are
double disc ground and heat treated to a 60 RC hardness. The knives have been engineered and manufactured with brass liners, stainless steel back-springs, and
Caribou or Elk antler scale handles. The Series includes a Single Blade Lock-Back design, and a Single Blade Notch Opening design. Please note, these are not mass
produced pocket knives. Every unit is hand-made and manufactured for everyday carry and use. They are exceptionally functional, durable, and classy tools.
Small Notch Folder (FSN3.25)
D2 Blade L = 3.25” / Weight = 4 oz.
Open = 7.75” / Closed = 4.2”
Medium Notch Folder (FMN3.5)
D2 Blade L = 3.5” / Weight = 5 oz
Open = 8.3” / Closed = 4.5”
(Crown / Burr antler handle)
LG. NOTCH Folder (FLN4.0)
D2 Blade L = 4” / Weight = 6.5 oz
Open = 9.5” / Closed = 5”
Small Back Lock (FSBL2.5)
D2 Blade L = 2.5” / 2.5 oz
Open = 5.75” / Closed 2.8”
Large Back Lock (FLBL4.0)
D2 Blade L = 4” / Weight = 8 oz
Open = 8” / Closed = 4.5”
POINT SERIES - Our unique Point Series features SILVER STAG’s top selling blade designs. This series is manufactured using the tips of the Deer or Elk horn.
The long, natural curve of the antler tips creates a unique and attractive handle that naturally curves to the contour of your hand.
Small Gamer (SG3.0PT)
D2 Blade L = 3”
Overall = Approx. 7”
Sharp Forest Point (SF3.75PT)
D2 Blade L = 3. 75
Total = Approx. 10”
Deep Valley Point (DV6.0PT)
D2 Blade L = 6”
Total = Approx. 14
SCRIMSHAW SERIES - Scrimshaw is a process of carving directly into the smooth bone finish of the antler. A wash is then applied to reveal the artist’s
work. The majority of SILVER STAG’s scrimshaw is subcontracted to Michelle Severe, a nationally recognized Scrimshaw Artist that specializes in North American
wildlife. The finished product is stunning and each piece is signed by the artist. Please call the factory direct for current scrimshaw availability, and/or to place a
custom order. Any knife can have scrimshaw designs applied to the handle. Please allow two or three weeks delivery on special orders, (samples as shown).
Mountain Edge (ME5.25SM)
Pacific Bowie (PB8.0SM)
Bird & Trout (BT4.0SM)
CHUCK WAGON SERIES - The line features our handmade D2 steel blades, with Elk or Deer antler
handles. The Series includes a Carver set, Cleaver set, a Steak Knife set and a couple of specialty knives
that every Kitchen should have. These are exceptional culinary tools that will impress the most selective
professional chef, or weekend barbeque cowboy. They are impressive tools and will compliment any
cooking environment.
Slab Series Beef Eater
(BE4.0) Sample Shown
CLEAVER SET (CLEV-Set)
Blade L = 6” / Overall = 12”
Fork = 12” – Includes Wood Box
New
CHEF PRO (CP8.0)
Blade L = 8” / Overall = 15”
New
RANCH STEAK SET (RSS.6x) NEW
Blade L =4.5” / Overall = 9”
6 units / Elk Tine Handles / Includes Wood Block Display
CARVER SET (CARV-Set)
Blade L = 8” / Overall =15”
FORK = 13” – Includes Wood Box
SWORD SERIES - We are the only company in the world manufacturing a High Carbon Stag Boar Hunter Sword! These swords are sharp, extremely functional,
and a real conversation piece. The Blade is manufactured with 1095 high carbon steel. Each blade is ground, polished and sharpened by hand. They feature a
trophy Elk or Deer antler handle and include a hand laced leather sheath. Awesome is the only way to describe these pieces.
Wild Boar Hunter (BH21.5)
Blade L = 21.5” / Overall = Approx. 30”
KNIVES MADE FROM CUSTOMER SUPPLIED ANTLER - SILVER STAG will manufacture a knife using a customer’s own supplied prized antler,
then laser engrave a name and/or date on the finished product. Every week we receive personal antler from our customers and our customers are ecstatic
with the finished heirlooms. This unique program is offered through select independent dealers and supported with point of purchase counter cards. Please
review our web site for additional samples and details on this exclusive program.
CUSTOM LOGO / CO-BRANDED PROGRAMS / PRIVATE LABEL
We enjoy partnering with organizations to design Private label or Co-Branded programs. We work closely with our customers to design a knife (or program),
that they can be proud of. We have two laser engraving machines in our shop that can apply just about any design or mark to the handle, blade, or sheath. The
finished products are unique, personal, and have a high perceived value. This is a great way for companies to promote their brand, raise money for a cause, or
give to customers or employees as an incentive item. Many non-profit organizations use SILVER STAG at their banquets to raise money for wildlife conservation.
We have been honored and humbled to have had the opportunity to work with the following industry organizations and awarded the following projects:
NRA Knife of the Year
KING Ranch Knife of the Year
Pheasants Forever 30thAnniversary Knife
Whitetails Unlimited Knife of the Year
Ducks Unlimited Knife of the Year
National Wild Turkey Federation Knife of the Year
Mule Deer Federation Knife of the Year
Quality Deer Management Knife of the Year
Cabela’s 50th Anniversary Commemorative Knife
NRA Limited Edition Damascus Knife
SAMPLES OF CUSTOMER PROJECTS
TESTIMONIALS (The following testimonials have been received by Silver Stag customers.
On Saturday, January 18, 2014, I was at the local NWTF chapter Hunting Heritage
They have not been edited.)
Banquet and saw the 2014 NWTF Knife of the Year. It was absolutely gorgeous
with the Damascus blade and elk antler handle. I kept staring at it. So when the
Hello Silver Stag, I have been using one of your crown style knives for two years,
Live Auction started and this knife came up, I just had to have it. It will hold a
on everything from deer to fish and small game and I haven’t put an edge on it
prominent place it my display. I will be looking for more Silver Stag knives in the
yet. It is by far the best knife I’ve had in 40 years of hunting. I was curious as to
future. Sincerely, Carl Tressler
whether or not you guys would come out with a kitchen set of knives. My wife
could really use a decent set of knives and I know the blades would surpass any
I just puchased the crown series pacific bowie knife. Truly a piece of art. The knife
others out there. Thank you Kevin
far exceeds what i had hoped for. The knife fits my hand as if it was made for me.
I’m 57 and have wanted a quality “Made In America” custom stag knife. I searched
I just purchased your Short Bowie SSB8.0 from the Tool Series. I must say that I am
and found your company and was impressed with what i saw on the web. This
very impressed with the standard and quality of your product. The knife and the
knife will be cherished, used and handed down to my grandson to keep in the
sheath exceeded my expectations. I am 100% satisfied and looking forward to
family.
purchasing more of your fantastic knives. Greg Coleiro
Thanks for your committment to quality and keeping Made In America something
Dear SS, I received my knife and I’m just emailing to thank you for your brilliant
to be proud of in the day in which we live! Again, amazing! Tim Gleason
customer service and your dedication to your product quality. I will certainly be
purchasing more of your product and recommend them to friends and family.
First and foremost best knives I’ve ever used and I really like that no two are exact-
Thanks again, Michael
ly the same. It’s nice to have a sharp reliable knife when skinning a deer. I could go
on and on about how much I appreciate silver stag knives. Thank you for making
I know my grandson will love his graduation gift! The combo is beautiful to say the
least and the quality and workmanship is superb. The sheath is every bit as good.
an affordable dependable and downright awesome knife. Winston
I am the proud owner of a Randall knife I ordered at Ft Bragg in l963. Waited 9
OUR GUARANTEE
months for delivery and the cost was $28. It is a wonderful knife but yours is every
Smith & Partners, LLC, is committed to both product quality and
customer service. We are proud to stand behind our products by
offering a limited lifetime warranty on all of our fixed blade knives,
and a one year warranty on our Pocket Series. In addition, the
company offers a free sharpening and refurbishing service. Details
on this unique program can be found on our web site or Warranty
Card. Please call us if you have any questions on our products or
programs. We aim to please and we sincerely appreciate your 16 years
of support!
bit as good and a much better value. I’ll be ordering more. Fred
I just purchased my 4th Silver Stag knife today (Large lockback folder), beautiful
knife and didn’t expect anything less. I am so glad that I saw one of your knifes in
a Gander Mountain store last year. By far the best knifes I have ever owned. Thanks
for making such a quality product made in USA for a reasonable price. Dan Newman
To place an order, call our toll free customer service at 1.888. 233 STAG (7824) or fax 360. 332. 4390 • Smith & Partners, LLC., 328 Martin St. Blaine, WA 98230
If you have any questions or comments, please email us at: [email protected]