6-3
[D1A0]
1. General Description
WIRING DIAGRAM
1. General Description
A: WIRING DIAGRAM
The wiring diagram of each system is illustrated so
that you can understand the path through which
the electric current flows from the battery.
Sketches and codes are used in the diagrams.
They should read as follows:
I Each connector and its terminal position are
indicated by a sketch of the connector in a disconnected state which is viewed from the front.
G6M0193
I The number of poles or pins, presence of a lock, and pin number of each terminal are indicated in the
sketch of each connector. In the sketch, the highest pole number refers to the number of poles which the
connector has. For example, the sketch of the connector shown in figure indicates the connector has 9
poles.
Connector used in vehicle
Connector shown in wiring diagram
Symbol
Sketch
Number of poles
Numbered in order from upper
right to lower left.
G6M0194
G6M0196
Numbered in order from upper
left to lower right.
G6M0198
G6M0195
G6M0197
2
WIRING DIAGRAM
I When one set of connectors is viewed from the
front side, the pole numbers of one connector are
symmetrical to those of the other. When these two
connectors are connected as a unit, the poles
which have the same number are joined.
[D1A0] 6-3
1. General Description
I The following color codes are used to indicate
the colors of the wires used.
Color code
L
B
Y
G
R
W
Br
Lg
Gr
P
Or
Lb
V
SA
SB
G6M0199
I Electrical wiring harness:
The connectors are numbered along with the number of poles, external colors, and mating connections in the accompanying list.
I The sketch of each connector in the wiring diagram usually shows the (A) side of the connector.
The relationship between the wire color, terminal
number and connector is described in figure.
Color
Blue
Black
Yellow
Green
Red
White
Brown
Light green
Gray
Pink
Orange
Light Blue
Violet
Sealed (Inner)
Sealed (Outer)
NOTE:
A wire which runs in one direction from a connector terminal sometimes may have a different color
from that which runs in the other direction from that
terminal.
H6M0509A
G6M0201
I In wiring diagram, connectors which have no terminal number refer to one-pole types. Sketches of
these connectors are omitted intentionally.
G6M0216
3
6-3
WIRING DIAGRAM
[D1A0]
1. General Description
I The wire color code, which consists of two letters (or three letters including Br or Lg), indicates
the standard color (base color of the wire covering)
by its first letter and the stripe marking by its second letter.
I Each unit is directly grounded to the body or
indirectly grounds through a harness ground terminal. Different symbols are used in the wiring diagram to identify the two grounding systems.
G6M0203
G6M0202
I The ground points shown in the wiring diagram
refer to the following:
I The table lists the nominal sectional areas and
allowable currents of the wires.
NOTE:
All wiring harnesses are provided with a ground
point which should be securely connected.
CAUTION:
I When replacing or repairing a wire, be sure
to use the same size and type of the wire which
was originally used.
NOTE:
I The allowable current in the table indicates the
tolerable amperage of each wire at an ambient
temperature of 40°C (104°F).
I The allowable current changes with ambient
temperature. Also, it changes if a bundle of more
than two wires is used.
No. of
Nominal secstrands/
tional area
strand diammm2
eter
0.3
0.5
0.75
0.85
1.25
2
3
5
8
7/0.26
7/0.32
30/0.18
11/0.32
16/0.32
26/0.32
41/0.32
65/0.32
50/0.45
Outside
diameter of
finished wiring
mm
1.8
2.2 (or 2.0)
2.6 (or 2.4)
2.4 (or 2.2)
2.7 (or 2.5)
3.1 (or 2.9)
3.8 (or 3.6)
4.6 (or 4.4)
5.5
H6M0787A
Allowable
current
Amps/40°C
7
12
16
16
21
28
38
51
67
4
WIRING DIAGRAM
[D1A0] 6-3
1. General Description
I Relays are classified as normally-open or normally-closed. The normally-closed relay has one or more
contacts.
The wiring diagram shows the relay mode when the energizing circuit is OFF.
B6M0748
5
6-3
[D2A1]
2. Basic Diagnostics Procedure
WIRING DIAGRAM
I Each connector number shown in the wiring diagram corresponds to that in the wiring harness.
The location of each connector in the actual
vehicle is determined by reading the first character
of the connector (for example, a “F” for F8, “i” for
i16, etc.) and the type of wiring harness.
The first character of each connector number
refers to the area or system of the vehicle.
Symbol
F
B
E
T
D
i
R
2. Basic Diagnostics Procedure
A: BASIC PROCEDURE
1. GENERAL
The most important purpose of diagnostics is to
determine which part is malfunctioning quickly, to
save time and labor.
Wiring harness and cord
Front wiring harness
Bulkhead wiring harness
Engine wiring harness,
Oxygen sensor cord
Transmission cord
Door cord LH & RH,
Rear door cord LH & RH
Instrument panel wiring harness
Rear wiring harness,
Rear defogger cord (Ground)
Fuel tank cord,
Roof cord,
Rear gate cord,
Rear gate lock adapter cord
2. IDENTIFICATION OF TROUBLE
SYMPTOM
Determine what the problem is based on the symptom.
3. PROBABLE CAUSE OF TROUBLE
Look at the wiring diagram and check the system’s
circuit. Then check the switch, relay, fuse, ground,
etc.
4. LOCATION AND REPAIR OF TROUBLE
1) Using the diagnostics narrow down the causes.
2) If necessary, use a voltmeter, ohmmeter, etc.
3) Before replacing certain component parts
(switch, relay, etc.), check the power supply,
ground, for open wiring harness, poor connectors,
etc. If no problems are encountered, check the
component parts.
5. CONFIRMATION OF SYSTEM
OPERATION
After repairing, ensure that the system operates
properly.
B: INSPECTION
1. VOLTAGE MEASUREMENT
1) Using a voltmeter, connect the negative lead to
a good ground point or negative battery terminal
and the positive lead to the connector or component terminal.
2) Contact the positive probe of the voltmeter on
connector (A).
The voltmeter will indicate a voltage.
3) Shift the positive probe to connector (B). The
voltmeter will indicate no voltage.
G6M0205
H6M0510A
6
WIRING DIAGRAM
4) With test set-up held as it is, turn switch ON.
The voltmeter will indicate a voltage and, at the
same time, the light will come on.
5) The circuit is in good order. If a problem such
as a lamp failing to light occurs, use the procedures outlined above to track down the malfunction.
[D2B3] 6-3
2. Basic Diagnostics Procedure
3. HOW TO DETERMINE AN OPEN
CIRCUIT
1) Voltmeter Method:
An open circuit is determined by measuring the
voltage between respective connectors and
ground using a voltmeter, starting with the connector closest to the power supply. The power supply
must be turned ON so that current flows in the circuit. If voltage is not present between a particular
connector and ground, the circuit between that
connector and the previous connector is open.
2. CIRCUIT CONTINUITY CHECKS
1) Disconnect the battery terminal or connector so
there is no voltage between the check points.
Contact the two leads of an ohmmeter to each of
the check points.
If the circuit has diodes, reverse the two leads and
check again.
2) Use an ohmmeter to check for diode continuity.
When contacting the negative lead to the diode
positive side and the positive lead to the negative
side, there should be continuity.
When contacting the two leads in reverse, there
should be no continuity.
G6M0208
2) Ohmmeter method:
Disconnect all connectors affected, and check continuity in the wiring between adjacent connectors.
When the ohmmeter indicates “infinite”, the wiring
is open.
G6M0207
3) Symbol “q—q” indicates that continuity exists
between two points or terminals. For example,
when a switch position is “3”, continuity exists
among terminals 1, 3 and 6, as shown in table
below.
G6M0209
B6M0749
7
6-3
[D2B4]
3. Working Precautions
WIRING DIAGRAM
3. Working Precautions
4. HOW TO DETERMINE A
SHORTCIRCUIT
A: PRECAUTIONS WHEN WORKING
WITH THE PARTS MOUNTED ON
THE VEHICLE
1) Test lamp method:
Connect a test lamp (rated at approximately 3
watts) in place of the blown fuse and allow current
to flow through the circuit. Disconnect one connector at a time from the circuit, starting with the one
located farthest from the power supply. If the test
lamp goes out when a connector is disconnected,
the wiring between that connection and the next
connector (farther from the power supply) is
shorted.
1) When working under a vehicle which is jackedup, always be sure to use safety stands.
2) The parking brake must always be applied during working. Also, in automatic transmission
vehicles, keep the select lever set to the P (Parking) range.
3) Be sure the workshop is properly ventilated
when running the engine. Further, be careful not to
touch the belt or fan while the engine is operating.
4) Be careful not to touch hot metal parts, especially the radiator and exhaust system immediately
after the engine has been shut off.
B: PRECAUTIONS IN TROUBLE
DIAGNOSIS AND REPAIR OF
ELECTRIC PARTS
G6M0210
1) The battery cable must be disconnected from
the battery’s (−) terminal, and the ignition switch
must be set to the OFF position, unless otherwise
required by the diagnostics.
2) Securely fasten the wiring harness with clamps
and slips so that the harness does not interfere
with the body end parts or edges and bolts or
screws.
3) When installing parts, be careful not to catch
them on the wiring harness.
4) When disconnecting a connector, do not pull
the wires, but pull while holding the connector
body.
2) Ohmmeter method:
Disconnect all affected connectors, and check continuity between each connector and ground. When
ohmmeter indicates continuity between a particular
connector and ground, that connector is shorted.
G6M0211
G6M0212
8
WIRING DIAGRAM
5) Some connectors are provided with a lock. One
type of such a connector is disconnected by pushing the lock, and the other, by moving the lock up.
In either type the lock shape must be identified
before attempting to disconnect the connector.
To connect, insert the connector until it snaps and
confirm that it is tightly connected.
[D3B0] 6-3
3. Working Precautions
6) When checking continuity between connector
terminals, or measuring voltage across the terminal and ground, always contact tester probe(s) on
terminals from the wiring connection side. If the
probe is too thick to gain access to the terminal,
use “mini” test leads.
To check water-proof connectors (which are not
accessible from the wiring side), contact test
probes on the terminal side being careful not to
bend or damage the terminals.
G6M0214
7) Sensors, relays, electrical unit, etc., are sensitive to strong impacts.
Handle them with care so that they are not dropped
or mishandled.
G6M0213
9
6-3
[D400]
4. How to Use Wiring Diagram
WIRING DIAGRAM
4. How to Use Wiring Diagram
H6M0796A
A: RELAY
D: FUSE No. & RATING
A symbol used to indicate a relay.
B: CONNECTOR-1
The “FUSE No. & RATING” corresponds with that
used in the fuse box (main fuse box, fuse and joint
box).
The sketch of the connector indicates the one-pole
types.
E: CONNECTOR-2
I Each connector is indicated by a symbol.
I Each terminal number is indicated in the corresponding wiring diagram in an abbreviated form.
I For example, terminal number “C2” refers to No.
2 terminal of connector (C: F41) shown in the connector sketch.
C: WIRING CONNECTION
Some wiring diagrams are indicated in foldouts for
convenience. Wiring destinations are indicated
where necessary by corresponding symbols (as
when two pages are needed for clear indication).
10
WIRING DIAGRAM
[D4M0] 6-3
4. How to Use Wiring Diagram
F: CONNECTOR SKETCH
L: SYMBOLS AND ABBREVIATIONS
I Each connector sketch clearly identifies the
shape and color of a connector as well as terminal
locations. Non-colored connectors are indicated in
natural color.
I When more than two types of connector number
are indicated in a connector sketch, it means that
the same type connectors are used.
A number of symbols and abbreviations are used
in each wiring diagram to easily identify parts or
circuits.
M: ABBREVIATION LIST
Abbr.
ABS
ACC
A/C
AD
AT
AU
+B
DN
E
F/B
FL1.5
IG
Illumi.
LH
Lo
M
M/B
MG
Mi
OP
PASS
RH
SBF
ST
SW
UP
WASH
G: GROUND
Each grounding point can be located easily by
referring to the corresponding wiring harness.
H: DIODE
A symbol is used to indicate a diode.
I: WIRE TRACING ON EXTENDED
WIRING DIAGRAMS
For a wiring diagram extending over at least two
pages, a symbol (consisting of the same characters with arrows), facilitates wire tracing from one
page to the next.
A ←→ A, B ←→ B
J: SYMBOLS OF WIRE
CONNECTION AND CROSSING
B6M0750A
K: POWER SUPPLY ROUTING
A symbol is used to indicate the power supply in
each wiring diagram.
“MB-5”, “MB-6”, etc., which are used as powersupply symbols throughout the text, correspond
with those shown in the POWER SUPPLY ROUTING in the wiring diagram.
Accordingly, using the POWER SUPPLY ROUTING and wiring diagrams permits service personnel to understand the entire electrical arrangement
of a system.
11
Full name
Antilock Brake System
Accessory
Air Conditioning
Auto Down
Automatic Transmission
Auto Up
Battery
Down
Ground
Fuse & Joint Box
Fusible link 1.5 mm2
Ignition
Illumination
Left Hand
Low
Motor
Main Fuse Box
Magnet
Middle
Optional Parts
Passing
Right Hand
Slow Blow Fuse
Starter
Switch
Up
Washer
6-3
[D5A0]
5. Wiring Diagram
WIRING DIAGRAM
5. Wiring Diagram
A: POWER SUPPLY ROUTING
GU01-05A
12
WIRING DIAGRAM
[D5A0] 6-3
5. Wiring Diagram
GU01-05B
13
6-3
[D5A0]
5. Wiring Diagram
No.
MB-1
MB-2
MB-3
MB-4
MB-5
MB-6
MB-7
MB-8
MB-9
MB-10
MB-11
SBF-7
ALT
ST
FB-1
FB-2
FB-3
FB-4
FB-5
FB-6
FB-7
FB-8
FB-9
FB-10
FB-11
FB-12
WIRING DIAGRAM
Load
Power window and sunroof circuit breaker
Door lock timer
Keyless entry control module
Data link connector
Engine control module
Fuel pump relay
Main relay
Daytime running light control module
Diode (Daytime running light)
Lighting switch
Cruise control sub switch
Horn switch
Transmission control module
AT shift lock control module
Hazard switch
Key warning switch
Horn
Headlight LH
Combination meter
Front fog light relay
Front fog light switch
Headlight RH
A/C relay holder
ABS control module
Combination meter
Daytime running light control module
Engine control module (AT)
Inhibitor switch (AT)
Starter interlock relay (MT)
Main fan relay
Parking switch
Blower motor relay
Front fog light relay
ABS control module
Stop light switch
Rear accessory power supply relay
Airbag control module
Airbag control module
Engine control module
Fuel pump relay
Ignition coil
Transmission control module
Blower motor relay
Mode control panel
Rear defogger switch
A/C relay
Sub fan relay
Thermal protector
No.
FB-13
FB-14
FB-15
FB-16
FB-17
FB-18
FB-19
FB-20
FB-21
FB-22
FB-23
FB-24
FB-25
FB-26
FB-27
FB-28
FB-29
14
Load
Back-up light switch (MT)
Check connector
Combination meter
Daytime running light control module
Daytime running light hi-beam relay
Daytime running light relay
Hazard switch
Inhibitor switch (AT)
Key warning module
Keyless entry control module
Power window and sunroof relay
Vehicle speed sensor (MT)
Engine control module
Rear defogger switch
Rear defogger
Rear defogger switch
Lighting switch
Parking switch
Keyless entry control module
Parking switch
Clock
Illumination control module
Illumination light
Keyless entry control module
AT shift lock control module
Front accessory power supply
Remote control rearview mirror switch
Rear accessory power supply relay
Radio
Front washer motor
Front wiper motor
Front wiper & washer switch
Rear washer motor
Rear wiper motor
Rear wiper relay
Combination meter
Radio
Room light
Spot light
Trunk room light
License plate light LH
License plate light RH
Tail light LH
Tail light RH
Front clearance light LH
Front clearance light RH
Combination meter
Hazard switch
Rear turn signal light LH
Turn signal switch
Front turn signal light LH
Side turn signal light LH
Combination meter
Hazard switch
Rear turn signal light RH
Turn signal switch
Front turn signal light RH
Side turn signal light RH
WIRING DIAGRAM
No.
FB-30
Load
ABS control module
AT shift lock control module
Cruise control main switch
Cruise control module
15
[D5A0] 6-3
5. Wiring Diagram
6-3
[D5B0]
5. Wiring Diagram
WIRING DIAGRAM
B: GROUND DISTRIBUTION
GU04-07A
16
WIRING DIAGRAM
[D5B0] 6-3
5. Wiring Diagram
GU04-07B
17
6-3
[D5B0]
5. Wiring Diagram
WIRING DIAGRAM
GU04-07C
18
WIRING DIAGRAM
[D5C0] 6-3
5. Wiring Diagram
C: AIRBAG SYSTEM
GU86-07
19
6-3
[D5D0]
5. Wiring Diagram
WIRING DIAGRAM
D: AIR CONDITIONING SYSTEM
GU45-07A
20
WIRING DIAGRAM
[D5D0] 6-3
5. Wiring Diagram
GU45-07B
21
6-3
[D5E0]
5. Wiring Diagram
WIRING DIAGRAM
E: ANTI-LOCK BRAKE SYSTEM
GU82-07A
22
WIRING DIAGRAM
[D5E0] 6-3
5. Wiring Diagram
GU82-07B
23
6-3
[D5F0]
5. Wiring Diagram
WIRING DIAGRAM
F: A/T CONTROL SYSTEM
GU41-09A
24
WIRING DIAGRAM
[D5F0] 6-3
5. Wiring Diagram
GU41-09B
25
6-3
[D5G0]
5. Wiring Diagram
WIRING DIAGRAM
G: A/T SHIFT LOCK SYSTEM
GU42-07
26
WIRING DIAGRAM
[D5H0] 6-3
5. Wiring Diagram
H: AUDIO SYSTEM
GU76-06
27
6-3
[D5I0]
5. Wiring Diagram
WIRING DIAGRAM
I: CHARGING SYSTEM
GU02-06
28
WIRING DIAGRAM
[D5J0] 6-3
5. Wiring Diagram
J: COMBINATION METER
GU65-06
29
6-3
[D5K0]
5. Wiring Diagram
WIRING DIAGRAM
K: CRUISE CONTROL SYSTEM
GU71-08
30
WIRING DIAGRAM
[D5L0] 6-3
5. Wiring Diagram
L: DOOR LOCK SYSTEM
GU73-06
31
6-3
[D5M1]
5. Wiring Diagram
WIRING DIAGRAM
M: ENGINE ELECTRICAL SYSTEM
1. 2200 cc ENGINE MODEL
GU10-16A
32
WIRING DIAGRAM
[D5M1] 6-3
5. Wiring Diagram
GU10-16B
33
6-3
[D5M1]
5. Wiring Diagram
WIRING DIAGRAM
GU10-16C
34
WIRING DIAGRAM
[D5M1] 6-3
5. Wiring Diagram
GU10-16D
35
6-3
[D5M2]
5. Wiring Diagram
WIRING DIAGRAM
2. 2500 cc ENGINE MODEL
GU10-17A
36
WIRING DIAGRAM
[D5M2] 6-3
5. Wiring Diagram
GU10-17B
37
6-3
[D5M2]
5. Wiring Diagram
WIRING DIAGRAM
GU10-17C
38
WIRING DIAGRAM
[D5M2] 6-3
5. Wiring Diagram
GU10-17D
39
6-3
[D5N0]
5. Wiring Diagram
WIRING DIAGRAM
N: FUEL GAUGE SYSTEM
GU61-08
40
WIRING DIAGRAM
[D5O0] 6-3
5. Wiring Diagram
O: HORN AND FRONT ACCESSORY POWER SUPPLY SYSTEM
GU74-04
41
6-3
[D5P0]
5. Wiring Diagram
WIRING DIAGRAM
P: KEYLESS ENTRY SYSTEM
GU77-01
42
WIRING DIAGRAM
[D5Q0] 6-3
5. Wiring Diagram
Q: LIGHTING SYSTEM (BACK-UP LIGHT)
GU29-06
43
6-3
[D5R0]
5. Wiring Diagram
WIRING DIAGRAM
R: LIGHTING SYSTEM (CLEARANCE LIGHT AND ILLUMINATION LIGHT)
GU21-07A
44
WIRING DIAGRAM
[D5R0] 6-3
5. Wiring Diagram
GU21-07B
45
6-3
[D5S1]
5. Wiring Diagram
WIRING DIAGRAM
S: LIGHTING SYSTEM (FRONT FOG LIGHT)
1. WITHOUT DAYTIME RUNNING LIGHT MODEL
GU22-05
46
WIRING DIAGRAM
[D5S2] 6-3
5. Wiring Diagram
2. WITH DAYTIME RUNNING LIGHT MODEL
GC22-01
47
6-3
[D5T1]
5. Wiring Diagram
WIRING DIAGRAM
T: LIGHTING SYSTEM (HEADLIGHT)
1. WITHOUT DAYTIME RUNNING LIGHT MODEL
GU20-07
48
WIRING DIAGRAM
[D5T2] 6-3
5. Wiring Diagram
2. WITH DAYTIME RUNNING LIGHT MODEL
GC20-08
49
6-3
[D5U0]
5. Wiring Diagram
WIRING DIAGRAM
U: LIGHTING SYSTEM (IN COMPARTMENT)
GU24-06
50
WIRING DIAGRAM
[D5V0] 6-3
5. Wiring Diagram
V: LIGHTING SYSTEM (STOP LIGHT)
GU25-05
51
6-3
[D5W0]
5. Wiring Diagram
WIRING DIAGRAM
W: LIGHTING SYSTEM (TURN SIGNAL LIGHT AND HAZARD LIGHT)
GU26-05
52
WIRING DIAGRAM
[D5X0] 6-3
5. Wiring Diagram
X: MULTIPLE POWER SOCKET SYSTEM (OPTION)
GU82-01
53
6-3
[D5Y0]
5. Wiring Diagram
WIRING DIAGRAM
Y: OIL PRESSURE AND TEMPERATURE GAUGE SYSTEM
GU66-07
54
WIRING DIAGRAM
[D5Z0] 6-3
5. Wiring Diagram
Z: PARKING BRAKE AND BRAKE FLUID LEVEL WARNING SYSTEM
GU60-06
55
6-3
[D5AA1]
5. Wiring Diagram
WIRING DIAGRAM
AA: POWER WINDOW SYSTEM
1. SEDAN AND WAGON MODEL
GU70-08A
56
WIRING DIAGRAM
[D5AA1] 6-3
5. Wiring Diagram
GU70-08B
57
6-3
[D5AA2]
5. Wiring Diagram
WIRING DIAGRAM
2. COUPE MODEL
GU70-07
58
WIRING DIAGRAM
[D5AB0] 6-3
5. Wiring Diagram
AB: RADIATOR FAN SYSTEM
GU14-11
59
6-3
[D5AC0]
5. Wiring Diagram
WIRING DIAGRAM
AC: REAR ACCESSORY POWER SUPPLY SYSTEM
GU90-03
60
WIRING DIAGRAM
[D5AD0] 6-3
5. Wiring Diagram
AD: REAR WINDOW DEFOGGER SYSTEM
GU52-07
61
6-3
[D5AE0]
5. Wiring Diagram
WIRING DIAGRAM
AE: REMOTE CONTROLLED REARVIEW MIRROR SYSTEM
GU79-05
62
WIRING DIAGRAM
[D5AF0] 6-3
5. Wiring Diagram
AF: SEAT BELT WARNING AND KEY WARNING SYSTEM
GU87-06
63
6-3
[D5AG0]
5. Wiring Diagram
WIRING DIAGRAM
AG: STARTER SYSTEM
GU03-05
64
WIRING DIAGRAM
[D5AH0] 6-3
5. Wiring Diagram
AH: SUNROOF SYSTEM
GU75-03
65
6-3
[D5AI0]
5. Wiring Diagram
WIRING DIAGRAM
AI: WIPER AND WASHER SYSTEM (FRONT)
GU50-03
66
WIRING DIAGRAM
[D5AJ0] 6-3
5. Wiring Diagram
AJ: WIPER AND WASHER SYSTEM (REAR)
GU51-04
67
6-3
[D5AJ0]
5. Wiring Diagram
WIRING DIAGRAM
MEMO:
68
[D6A0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
6. Electrical Wiring Harness and Ground Point
A: OVERALL LOCATION
H6M0781A
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Front wiring harness
Engine wiring harness
Bulkhead wiring harness
Instrument panel wiring harness
Front door cord RH
Rear door adapter cord RH
Rear door cord RH
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Rear wiring harness
Rear defogger cord (Ground)
Fuel tank cord
Rear door cord LH
Rear door adapter cord LH
Front door cord LH
Roof cord
69
(15)
(16)
(17)
(18)
(19)
(20)
Transmission cord
Rear gate cord
Rear gate lock adapter cord
Oxygen sensor cord
Combination switch cord
Trunk lid cord
6-3
[D6B0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
B: FRONT WIRING HARNESS
I List of Items
No.
F2
F3
F5
F6
F7
F16
F17
F19
F21
F23
F24
F25
F26
F27
F28
F31
F32
F33
F34
F35
F36
F37
F38
F39
F40
F41
F44
F45
F46
F49
F51
F52
F53
F54
F55
F62
F63
F64
F66
F67
F68
★: Non-colored
Connector
Pole
Color
16
Blue
2
★
1×2
★
2
Black
3
★
2
Black
2
Black
2
★
2
Black
3
★
3
Gray
1
★
3
Green
4
★
4
★
4
★
2
Green
2
★
4
★
2
★
3
★
6
Black
1
★
8
Black
9
Brown
7
Gray
8
★
20
★
8
★
31
★
2
★
2
Gray
2
Gray
2
★
12
★
6
★
6
★
1
★
4
★
2
★
4
Black
Area
B-4
B-1
B-1
B-1
B-1
B-1
B-2
C-3
C-2
B-2
B-2
B-2
B-2
B-3
B-3
B-3
B-3
B-3
B-3
B-3
B-3
B-3
B-3
B-3
B-4
B-4
B-4
B-4
B-4
B-2
B-2
B-1
C-3
B-4
B-4
B-1
B-1
B-2
B-3
B-3
B-3
No.
B100
Connecting to
Name
Bulkhead wiring harness (ABS)
Front turn signal light RH
Horn
Front fog light RH
Headlight RH
Sub fan motor
Radiator main fan motor
Front turn signal light LH
Front fog light LH
Headlight LH
A/C compressor
Generator
A/C fuse (Relay holder)
A/C sub fan relay (Relay holder)
A/C relay (Relay holder)
Front washer motor
Rear washer motor
SBF holder
M/B
F/B
B61
B62
B108
R49
F63
F62
Bulkhead wiring harness
ABS control module
Side turn signal light RH
Front clearance light RH
Front clearance light LH
Side turn signal light LH
Rear wiring harness (ABS)
Shield joint connector (ABS)
ABS motor ground
Radiator main fan relay (Relay holder)
FWD switch (Relay holder)
M/B
70
[D6B0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0782A
71
6-3
[D6C0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
C: BULKHEAD WIRING HARNESS (IN ENGINE ROOM)
I List of Items
No.
B2
B4
B5
B6
B7
B8
B10
B11
B12
B14
B15
B16
B17
B20
B21
B22
B24
B25
★: Non-colored
Connector
Pole
Color
3
★
4
Gray
2
Gray
2
★
4
★
6
★
2
Gray
20
Black
12
★
1
Black
2
★
2
Gray
3
★
10
★
20
★
16
★
2
Gray
2
Brown
Area
B-2
B-1
B-2
B-2
B-2
B-2
B-2
B-3
B-3
B-3
B-3
B-3
B-2
B-2
B-2
B-2
B-3
B-3
No.
T4
T3
E1
E2
E3
T1
T2
72
Connecting to
Name
Atmospheric pressure sensor (2500 cc engine model)
AT dropping resistor
Resistor (Daytime running light)
ABS front sensor RH
Cruise control actuator
Front wiper motor
A/C pressure switch
Transmission (AT)
Starter (Magnet)
ABS front sensor LH
Brake fluid level switch
Vehicle speed sensor (MT)
Oxygen sensor cord
Engine wiring harness
Engine wiring harness
Back-up light switch (MT)
Neutral position switch (MT)
[D6C0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0783A
73
6-3
[D6D0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
D: BULKHEAD WIRING HARNESS (IN COMPARTMENT)
I List of Items
No.
Connector
Pole Color Area
B30
B31
B32
B36
B37
B40
24
7
3
24
16
16
★
★
Black
Blue
★
★
C-1
C-1
B-2
B-2
B-2
C-2
B41
2
★
B-2
B42
B43
B45
B46
B47
B48
B50
B51
B52
B53
B54
B55
4
6
6
4
6
4
4
8
12
6
24
24
Blue
Black
★
Green
Brown
Red
★
Blue
Blue
★
★
Gray
B-1
B-4
A-4
B-1
B-1
B-1
B-1
C-1
C-1
B-2
B-2
C-2
B57
12
★
B-2
B61
B62
B64
8
20
2
★
★
Black
B-1
B-1
B-2
No.
Connecting to
Name
D1
AB1
Front door cord LH
SRS (Airbag) harness
Turn & hazard module
i1
i2
Instrument panel wiring
harness
R53
No.
Data link connector
Power window circuit
breaker
Power window relay
Illumination control module
Roof cord
Fuel pump relay
Main relay
Front fog light relay
Blower relay
F/B
Shield joint connector (AT)
Transmission control module
Shift lock control module
(AT)
F44
F45
Front wiring harness
Stop light switch
Stop & brake switch (With
cruise control)
Cruise control sub switch
B65
4
Black
B-2
B68
B69
B70
B71
B72
B73
B74
B75
B76
B79
5
4
18
17
4
2
2
2
2
14
Black
★
★
★
Blue
★
Black
Green
Green
Gray
B-2
C-2
C-2
C-2
B-2
B-2
B-2
B-2
B-2
C-3
B81
1×2
★
B-2
B82
6
Black
B-2
B83
6
★
C-4
B86
B87
B88
B92
B94
4
2
4
6
20
★
★
Brown
★
★
B-3
B-4
B-3
B-1
C-1
B95
2
★
B-4
B96
10
★
B-4
B97
B98
B99
10
20
20
Blue
Black
★
B-4
B-4
B-4
R1
R2
R3
Rear wiring harness
B100
16
Blue
B-1
F2
Front wiring harness (With
ABS model)
B101
B102
24
5
★
★
B-4
B-4
B103
4
Blue
B-4
B104
4
Red
B-4
B105
B106
4
2
Blue
★
B-2
B-2
B107
2
Blue
B-2
B108
B112
8
2
★
★
B-1
B-2
B116
4
Black
C-3
B117
4
★
C-3
B118
2
★
C-3
B119
1
★
C-3
B120
B121
14
1
★
★
C-3
B-3
B122
6
★
C-4
B125
B126
1
1
Green
Green
B-4
B-4
35
★
B-3
35
Black
B-3
28
★
B-3
28
Black
B-3
30
★
B-3
B134
B135
Combination switch
Ignition switch
Key lock solenoid (AT)
Key warning switch
B76
B75
Connector
Pole Color Area
B136
Test mode connector
Check connector
Diagnosis terminal
(Ground)
Diagnosis connector
Shield joint connector
(E/G)
Blower motor resistor
Blower motor
Evaporator thermoswitch
Door lock timer
Cruise control module
Diode (Daytime running
light)
Daytime running light control module
30
Black
B-3
B152
B158
B159
B160
B161
B162
B163
B164
B165
B166
7
12
10
6
6
8
8
18
18
10
★
★
Gray
Gray
Brown
★
★
★
★
★
B-1
B-1
B-1
C-1
C-1
C-2
C-2
C-2
C-2
B-2
B167
3
★
C-3
B168
B169
3
6
★
★
B-3
B-3
B170
2
★
B-3
B175
2
★
C-3
B176
10
★
C-2
★: Non-colored
74
No.
D11
F46
Connecting to
Name
Front door cord RH
Daytime running light relay
Daytime running light hibeam relay
Rear accessory power
supply relay
Starter interlock relay (MT)
Clutch switch (MT)
Clutch switch (Cruise control)
Front wiring harness
Diode (Front fog light)
Select lever illumination
light (AT)
Parking position switch &
shift lock solenoid (AT)
CD player illumination light
Front accessory power
supply (Power)
Radio
Audio ground
Sensor ground joint connector (E/G)
B126
Test mode connector
B125
Engine control module
(2200 cc engine model)
Engine control module
(2500 cc engine model)
Engine control module
(2200 cc engine model)
Engine control module
(2500 cc engine model)
Engine control module
(2200 cc engine model)
Engine control module
(2500 cc engine model)
F/B
F/B
F/B
Front fog light switch
Cruise control main switch
B163 Combination switch cord
B162 Bulkhead wiring harness
B165 Combination switch cord
B164 Bulkhead wiring harness
Key warning module
Front accessory power
supply (Ground)
A/C switch
Blower fan switch
Mode control panel illumination light
Ash tray illumi. light
Keyless entry control module
[D6D0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0784A
75
6-3
[D6E1]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
E: ENGINE WIRING HARNESS AND TRANSMISSION CORD
1. 2200 cc ENGINE MODEL
I List of Items
No.
E1
E2
E3
E4
E5
E6
E7
E8
E10
E11
E12
E13
E14
E15
E16
E17
E19
E20
E21
E24
E25
★: Non-colored
No.
T1
T2
T3
T4
T7
★: Non-colored
Connector
Pole
Color
10
★
20
★
16
★
2
Blue
2
Gray
2
Gray
3
Gray
3
★
2
★
1
★
4
Dark gray
3
Black
2
Gray
2
★
2
Gray
2
Gray
2
★
2
Black
3
★
4
★
4
★
Connector
Pole
Color
2
Gray
2
Brown
12
★
20
Black
12
★
Area
C-1/C-3
A-2
A-2
A-2
A-1
A-2
A-3
B-2
B-2
B-2
A-2
A-2
A-3
B-3
B-3
B-4
B-2
A-3
A-3
D-1/D-3
D-2/C-4
Area
D-1
D-1
D-3
D-3
C-4
No.
B20
B21
B22
No.
B24
B25
B12
B11
Connecting to
Name
Bulkhead wiring harness
Bulkhead wiring harness
Bulkhead wiring harness
Purge control solenoid valve
Injector #1
Injector #3
Idle air control solenoid valve
Engine coolant temperature sensor and thermometer
Crankshaft position sensor
Oil pressure switch
Ignition coil and ignitor
Throttle position sensor
Knock sensor
Camshaft position sensor
Injector #2
Injector #4
Power steering oil pressure switch
Intake air temperature sensor
Intake manifold pressure sensor
Front oxygen (A/F) sensor
Rear oxygen sensor
Connecting to
Name
Bulkhead wiring harness (MT)
Bulkhead wiring harness (AT)
Inhibitor switch (AT)
76
[D6E1] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0785A
77
6-3
[D6E2]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
2. 2500 cc ENGINE MODEL
I List of Items
No.
E1
E2
E3
E4
E5
E6
E7
E8
E10
E11
E12
E13
E14
E15
E16
E17
E19
E21
E24
E25
E42
★: Non-colored
No.
T1
T2
T3
T4
T7
★: Non-colored
Connector
Pole
Color
10
★
20
★
16
★
2
Blue
2
Gray
2
Gray
6
★
3
★
2
★
1
★
4
Dark gray
4
★
2
Gray
2
★
2
Gray
2
Gray
2
★
4
★
6
★
4
★
2
★
Connector
Pole
Color
2
Gray
2
Brown
12
★
20
Black
12
★
Area
C-1/C-3
A-2
A-2
A-2
A-1
A-2
A-3
B-2
B-2
B-2
A-2
A-2
A-3
B-3
B-3
B-4
B-2
A-3
D-1/D-3
D-2/C-4
A-3
Area
D-1
D-1
D-3
D-3
C-4
No.
B20
B21
B22
No.
B24
B25
B12
B11
Connecting to
Name
Bulkhead wiring harness
Bulkhead wiring harness
Bulkhead wiring harness
Purge control solenoid valve
Injector #1
Injector #3
Idle air control solenoid valve
Engine coolant temperature sensor and thermometer
Crankshaft position sensor
Oil pressure switch
Ignition coil and ignitor
Throttle position sensor
Knock sensor
Camshaft position sensor
Injector #2
Injector #4
Power steering oil pressure switch
Pressure sensor and intake air temperature sensor
Front oxygen (A/F) sensor
Rear oxygen sensor
Air assist solenoid valve
Connecting to
Name
Bulkhead wiring harness (MT)
Bulkhead wiring harness (AT)
Inhibitor switch (AT)
78
[D6E2] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0786A
79
6-3
[D6F0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
F: INSTRUMENT PANEL WIRING HARNESS
I List of Items
No.
i1
i2
i10
i11
i12
i18
i22
★: Non-colored
Connector
Pole
Color
24
Blue
16
★
10
Green
16
Green
18
Green
8
★
8
★
Area
B-2
B-2
B-2
B-2
B-2
B-3
B-3
No.
B36
B37
Connecting to
Name
Bulkhead wiring harness
Combination meter
Rear defogger switch
Hazard switch
80
[D6F0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0788A
81
6-3
[D6G0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
G: REAR WIRING HARNESS
I List of Items
No.
R1
R2
R3
R4
R8
R9
R11
R12
R14
R15
R16
R22
R46
R47
R49
R52
R53
R55
R56
R57
R58
R59
R67
R68
R69
R70
R72
R73
R78
R93
R94
R95
★: Non-colored
Connector
Pole
Color
10
Blue
20
Black
20
★
1
Black
2
★
1
Brown
2
★
8
★
1
Brown
2
★
8
★
12
★
1
Brown
1
Brown
2
★
3
★
12
★
2
★
6
★
2
★
2
★
12
★
6
★
2
★
2
★
2
Black
2
★
3
★
2
★
2
★
4
★
10
★
2
Gray
2
Gray
Area
B-2
B-2
B-2
B-3
B-3
B-3
D-4
B-3
B-2
C-3
B-2
B-3
A-3
B-4
B-3
C-1
B-3
A-3
B-2
A-3
A-3
B-3
C-1/D-1
C-2/D-2
B-3
C-2/D-1
C-1/D-1
B-2
B-3
B-4
A-3
B-3
C-1
C-1
No.
B97
B98
B99
D21
D27
R57
R67
F55
B45
R15
R46
R95
R94
82
Connecting to
Name
Bulkhead wiring harness
Parking brake switch
Seat belt switch
Front door switch LH (Sedan and Wagon model)
Front door switch LH (Coupe model)
Rear door adapter cord LH
Front door switch RH (Sedan and Wagon model)
Front door switch RH (Coupe model)
Rear door adapter cord RH
Fuel tank cord
Rear door switch RH
Rear door switch LH
Fuel tank cord
Fuel tank pressure sensor
Front wiring harness (With ABS model)
Room light
Bulkhead wiring harness
Sunroof control module and sunroof motor
Spot light
Rear wiring harness
Fuel gauge module & fuel pump assembly
Fuel gauge sub module
Rear wiring harness
Pressure control solenoid valve
Drain valve
ABS G sensor
Rear ABS sensor RH
Rear ABS sensor LH
Sunroof switch
Remote control rearview mirror switch
Pressure control solenoid valve cord
Fuel tank cord
[D6G0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0568A
83
6-3
[D6H0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
H: DOOR CORD
I List of Items
No.
D1
D2
D3
D5
D7
D8
D11
D12
D13
D15
D17
D18
D21
D23
D24
D25
D26
D27
D29
D30
D31
D32
D50
D53
D54
D55
D56
D57
D62
★: Non-colored
Connector
Pole
Color
13
★
2
★
2
Green
6
★
16
★
12
★
4
★
13
★
2
★
2
Green
6
★
5
★
4
★
8
★
2
★
2
Green
5
★
4
★
8
★
2
★
2
Green
5
★
4
★
9
★
3
★
8
★
8
★
8
★
8
★
8
★
Area
C-3
C-3
C-3
C-3
C-3
C-3
C-3
B-2
B-2
B-2
B-2
B-2
B-2
C-3
C-4
C-4
B-4
B-4
B-2
B-3
B-3
B-2
B-3
B-2
B-2
C-3
C-3
B-2
B-2
B-2
No.
B30
B101
R11
R14
B113
B124
D55
D54
D57
D56
84
Connecting to
Name
Bulkhead wiring harness
Front speaker LH
Front power window motor LH
Remote control rearview mirror LH
Power window main switch (Sedan and Wagon model)
Power window main switch (Coupe model)
Front door lock actuator LH
Bulkhead wiring harness
Front speaker RH
Front power window motor RH
Remote control rearview mirror RH
Front power window sub switch RH
Front door lock actuator RH
Rear wiring harness
Rear door speaker LH
Rear power window motor LH
Rear power window sub switch LH
Rear door lock actuator LH
Rear wiring harness
Rear door speaker RH
Rear power window motor RH
Rear power window sub switch RH
Rear door lock actuator RH
Bulkhead wiring harness
Bulkhead wiring harness
Rear door cord LH
Rear door adapter cord LH
Rear door cord RH
Rear door adapter cord RH
Door lock switch RH
[D6H0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0538A
85
6-3
[D6I0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
I: REAR END WIRING HARNESS OF SEDAN AND COUPE
I List of Items
No.
R17
R18
R19
R20
R21
R26
R27
R28
R65
R66
R76
R77
R96
★: Non-colored
Connector
Pole
Color
1
Black
2
Black
2
★
2
★
2
Black
2
Black
7
★
2
★
7
★
1
Black
2
Black
2
★
2
★
2
Black
Area
B-3
B-3
B-3
B-3
B-3
B-2
B-4
C-3
C-3
B-2
B-3
C-3
C-4
B-3
No.
R96
R19
86
Connecting to
Name
Rear defogger (Power)
Rear speaker RH
High-mount stop light (Sedan)
Trunk lid cord (Coupe-rear spoiler)
Trunk room light
Rear speaker LH
Rear combination light RH
Trunk room light switch
Rear combination light LH
Rear defogger (Ground)
High-mount stop light (Coupe-rear spoiler)
License plate light LH
License plate light RH
Rear wiring harness
[D6I0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0569A
87
6-3
[D6J0]
WIRING
6. Electrical Wiring Harness and Ground Point
DIAGRAM
J: REAR END WIRING HARNESS OF WAGON
I List of Items
No.
R26
R28
R32
R36
R37
R38
R39
R76
R77
★: Non-colored
No.
D33
D34
D35
D39
D40
D43
D46
D47
D48
D58
D59
★: Non-colored
Connector
Pole
Color
7
★
7
★
3
★
5
Black
2
★
4
★
4
★
2
★
2
★
Area
C-4
C-2
C-3
C-4
C-3
C-3
C-3
C-3
C-3
Connector
Pole
Color
2
★
4
★
4
★
2
★
1
★
4
★
2
Black
4
★
1
★
2
★
2
★
Area
C-3
C-3
C-3
B-2
B-3
A-3
A-3
A-3
A-3
A-3
A-3
No.
Rear
Rear
Rear
Rear
D33
D34
D35
Connecting to
Name
combination light RH
combination light LH
accessory power supply
wiper relay
Rear gate cord
License plate light LH
License plate light RH
No.
R37
R38
R39
D59
D58
88
Connecting to
Name
Rear wiring harness
High-mount stop light
Rear defogger (Power)
Rear wiper motor
Rear gate latch switch
Rear gate lock actuator
Rear defogger (Ground)
Rear gate lock adapter cord
Rear gate cord
[D6J0] 6-3
6. Electrical Wiring Harness and Ground Point
WIRING DIAGRAM
I Location
H6M0570A
89
6-3
WIRING DIAGRAM
MEMO:
90