NEW Exceptional engineering | rock solid | extensive testing MCS Vehicle Specific Console Box And Wiring Chase Only: Chevrolet Tahoe (2015) Chevrolet Silverado 1500 (2014-2015) Chevrolet Silverado 2500/3500 (2015) Placement Seat Configuration Drilling Required Weight Height Width Depth Vertical Height (VH) Interior Depth (I) On top of transmission hump Bucket No - attaches to transmission hump 23.3 lbs. 14.82” 13.71” 37.75” 7.5” 8.0” Features: • • • • • Heavy gauge steel, fully welded construction for long-term durability. Black powdercoat finish for maximum corrosion resistance. Low profile no-drill vehicle specific console for the Chevy Tahoe and Silverado Vehicles. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Vertical, angled section accommodates 7.5” of mounting space and is designed to house two full sized radios or a larger radio such as the Motorola APX 09. • Horizontal, low profile section accommodates 7.0” of mounting space (11.5” without an internal cup holder) and is designed to house radio control heads and accessories. • Two 12 volt plug inserts (located on passenger side). • USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using Faceplate (Item No. 15250). • Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. • Wiring Chase bolts onto the front of the console to cover/hide the wires for a finished look. Wiring chase is adjustable to fit the Silverado and Tahoe dashes. • Box will ship fully assembled (except for accessories). • 3 faceplates and 3 filler panels are included. • Computer can be center mounted in two locations: 1. Off-set towards the passenger on the “smiley face pattern” 2. On the 3-bolt pattern closer to the driver for easy articulation access Note: - If you require a cupholder, use the MCS Internal Cupholder (Item No. MCS-INTCUP) or any external cupholders - If you require an armrest, there are threaded PEMS on both sides of the console to attach Driver Armrest (Item No. 7110-1013) and Passenger Armrest (Item No. 7110-1012). There are also threaded PEMS on the back of the console to use the following armrests: 7160-0429, 7160-0430 or 7160-0524. Item No. 7160-0548-02 D VH I H W 3001 Borham Ave. | Stevens Point, WI 54481, USA Phone: 715.344.3482 | Toll-free: 800.487.9220 | Fax: 715.344.5209 Email: [email protected] | Website: www.gamberjohnson.com Follow us on: This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2014 Gamber-Johnson LLC