Soldered Jumper Cables up to 20 meters Long Jumper Cables

T E C H N I C A L D ATA S H E E T
Long Jumper Cables
Rev.: 00/2012-10-19
1/2
Soldered Jumper Cables up to 20 meters
EUPEN offers a wide range of jumper cables with 1/2” Hiflex cable (5092 / EC4-50-HF) or 1/2” standard cable
(5128 / EC4-50) with soldered connectors*. In particular, we offer “long” jumpers (more than 10 meters).
All metal contact parts are silver plated. They are designed for watertight applications and optimised jumper cable
performances.
Also available with one loose connector.
Features
• excellent return loss values
• very low PIM
• easy, fast and reliable installation
• water tightness according to IP67/IP68
(mated connectors)
• longitudinal water tightness is provided
by the special connector design
(O-Ring in connector head)
• the overmolding of the connector provides an
additional mechanical protection
• length: 10, 15 or 20 meters
(other lengths possible on request)
Product reference
EC4-vv-S-www-DyzDyz
EC4-vv-SL-www-DyzDyz
EC4 =
vv =
S=
SL =
1/2” cable (5128)
HF for Hiflex (5092)
soldered connectors both sides
first connector soldered,
second connector delivered loose
www = length in cm
D=
Connector DIN 7-16 type
y=
M for male or F for female
z=
L for right angle connector
(z =
nothing for straight connector)
Marking
Soldered Jumper Cables up to 20 meters
• Manufacturer EUPEN
• Week & Year of Production
• Product Ref.: for ex.: EC4-HF-S-200-DMDM
• Torque
• Product Nr. EUPEN
• Serial Number
* see our datasheet “Soldered Jumper Cables”
for an overview of the other possibilities
ISO
Certified
Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM
Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: [email protected]
T E C H N I C A L D ATA S H E E T
Long Jumper Cables
Rev.: 00/2012-10-19
2/2
Soldered Jumper Cables up to 20 meters
TECHNICAL DATA
Cable type
EC4-50-HF (5092)
1/2”-HIFLEX
Electrical
• Nominal impedance [Ω]
• Frequency range [MHz]
• PIM ratio (2 x 20 W carrier) [dBc]
• Attenuation per m at 20 °C [dB] - without connectors*
960 MHz
1880 MHz
2200 MHz
2600 MHz
• RF Voltage rating (Peak) [V]
• Relative propagation velocity [%]
50 ±1
10 - 2700
≤ -155 (Typical -163)
Mechanical
• Minimum bending radius [mm]
- single
- repeated
• Connector torque (nominal) [Nm]
- DIN 7-16 connector
- N type connector
Environmental
• Temperature range [°C]
- installation
- operating
• Protection against water ingress
- Longitudinal water tightness
• General environmental
• RoHS compliance (EU Directive 2002/95/EC)
Maximum power rating [W] **
Connector 1 Connector 2
Reference
7-16
7-16
...-DyzDyz
Return loss [dB] (VSWR) up to 20 meters
Connector 1 Connector 2
Reference
7-16
7-16
...-DyDy
...-DyDML
EC4-50-(5128)
1/2”
0.106
0.151
0.170
0.187
1130
82
0.071
0.103
0.113
0.123
1600
88
30
30
70
125
28
12
28
12
-40 to +60
-55 to +85
Water tightness acc. to IP 68 (0.5 bar / 24 h)
Two O-rings in the DIN 7-16 connector head
Corrosion and UV resistant
YES
0.8-1.0 GHz
880
1.7-2.2 GHz
560
2.5-2.7 GHz
500
0.8-1.0 GHz
1090
1.7-2.2 GHz
710
2.5-2.7 GHz
630
0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz 0.8-1.0 GHz 1.7-2.2 GHz 2.5-2.7 GHz
>32 (<1.05) >29 (<1.075) >27 (<1.095) >32 (<1.05) >29 (<1.075) >27 (<1.095)
>30 (<1.065) >27 (<1.095) >25 (<1.12)
-
Soldered Jumper Cables up to 20 meters
* Typical values without connectors, the typical connector attenuation (2 connectors) is less than 0.02 [dB]
** Ambient temperature = 40 °C; Temperature of inner conductor = 100 °C; VSWR = 1.0; no solar loading
ISO
Certified
Company KabelwerK eupen aG - Malmedyer Straße 9 - 4700 eupen - belGIuM
Tel.: +32(0) 87.59.70.00 - Fax : +32(0) 87.59.71.00 - http://www.eupen.com - e-mail: [email protected]