1. home and garden

LOADER ATTACHMENTS
SKIDSTEER ATTACHMENTS
SNOW BLADES
CUSTOM made attachments
to fit any loader
or skid steer
1-800-698-5510
www.martatch.com
PRODUCT INDEX
ATTACHMENTS
Buckets
Bale Spears
Manure Forks
Stone Forks
Grapples
Pallet Forks
Logging Equipment
Lift Boom
Rotary Cutter
Gardening
Industrial
Page
2-3
4
5
5
6-7
8-9
10-11
11
11
12
13
SNOWBLADES
Snowblades
14-18
Custom made attachments
to fit any loader or
skid steer.
1-800-698-5510
1
PRODUCT
BUCKETS
MARTATCH buckets, and all other attachments, are built with
the end user in mind. With our roots as farmers, we know the
abuse, and wear and tear, that attachments need to go through
to get the job done. Each attachment is reinforced and gussetted
to make it strong and durable for years after purchase.
Attachments are stocked for fast turn arounds but custom pieces
are built constantly as well.
Give us a call at 1-800-698-5510 for your needs today.
High dump Bucket
FEATURES
• Increases height of dump
• piles manure higher in your storage
Skidsteer / Loader Bucket
FEATURES
• ¼” material used for body
• hardened side cutting edge
for longer wear life
• ¾” x 6” hardened cutting edge
• trailer hitch for front towing available
• will custom fabricate to any size or specifications
• skidsteer bucket shown
2
www.martatch.com
BUCKETS
GUIDE
Skidsteer / loader Buckets
Ice Scraper Attachment
The ice scraper easily
attaches and detaches
with a single hitch pin
Hitch
Chain Hook
is inside bucket to
prevent chain snapping at operator
Skidsteer
Bucket
Steps
Heavy Duty Tooth Bucket
FEATURES
• extreme duty teeth
• hardened side wear plates
• pointed side for better penetration
telehandler & wheel loader bucket
Standard
FEATURES
• bucket floors are
constructed with AR400 Steel
• extra heavy duty construction for
high capacity work loads
• OPTIONAL: grill to prevent overflow
High Volume
LOADER, Heavy Duty, High Volume, Bucket
FEATURES
• ¼” material used for body
• inside gussets for more strength
• hardened
side cutting edge for
longer wear life
• ¾” x 6” hardened cutting edge
• trailer hitch for front towing available
• will custom fabricate to any size or specifications
• (loader bucket shown)
Loader bucket with top guard
FEATURES
• ¼” material used for body
• inside gussets for more strength
• hardened side cutting edge for
longer wear life
• ¾” x 6” hardened cutting edge
• top guard for bigger loads
• trailer hitch for front towing available
• will custom fabricate to any size or specifications
1-800-698-5510
3
BALE SPEARS
PRODUCT
safety frame BALE SPEAR
FEATURES
• top safety frames are removable for higher
stacking capabilites under truss and low buildings
• safety frames easily remove without tools
• available in 26” and 36” high
• see through backplate for better visibility at
truck level
• 32”, 39”, and 49” spear lengths
• 46” wide frames (30” tine spacing)
• available with any amount of tines to suit
your needs
3-POINT HITCH BALE SPEAR
FEATURES
• standard 3-point hitch mounts
• 46” wide frames (30” tine spacing)
• available with any amount of tines to
suit your needs
• 32”, 39”, and 49” spear lengths
compact utility BALE SPEAR
FEATURES
• safety frames can be easily removed
• light duty bale spears
• economical pricing
• 20-40 hp tractors and skid steers
• light weight to maximize the lifting
capacity of the machine
Large, Heavy Duty, Bale Spear
with hydraulic Bale Release Pusher
FEATURES
• designed to carry 3 or 4 large
square bales
• hydraulic pusher to release bales
from tines
• top frame can be removed for handling
bales in low buildings
• safety support to prevent bale fork from
tipping when not in use. Folds up when
not in use.
• 25” tine spacing
• 60” W x 54” H main frame dimensions
• 60” W x 79” H total frame with extension
• hydraulic hoses included
• quick couplers sold separately
No Hydraulic Option
4
Safety Stand
Vertical Extension
www.martatch.com
MANURE / STONE FORKS
GUIDE
MANURE FORK
FEATURES
• 36” Conus I cranked tines at 8” centers
• 31” useable length
• from 42” to 108” widths
• available in skidsteer and loader profiles
• optional: 32” cranked tines
with 26” useable length
• original kverneland tines
RETAINER STYLE STONE FORK
FEATURES
• 40” useable length tines at 3” centers
• plasma cut for strength and durability
•p
oints are reinforced with
cross bar
•p
erforms well in loose
ground
• available from 54” to 108”
REGULAR STYLE STONE FORK
FEATURES
• 39” Conus II cranked tines at
4” centers
• 32” useable length
• available from 54” to 108”
widths
• see through back for better
visibility
• original kverneland tines
• performs well in loose ground or pasture land
Heavy Duty Pallet Fork
Bale Spear Combo
FEATURES
• an economical choice with 2 tools in one attachment
• pallet fork tines easily remove without tools
• bale spear tines easily remove without tools
• safety frames easily remove without tools
• 48” bale spear tines
• 42” and 48” pallet fork tines
• pallet fork tines adjustable for width
• standard class II forklift forks
Easy removal
of safety
frames.
No tools
needed!
1-800-698-5510
Forks, tines
and safety
frames are
easily removed
without tools.
5
PRODUCT
GRAPPLES
Handling odd materials throws a
challenging curve ball every time.
With Martatch’s grapple buckets
and forks you won’t be stumped
when the worst comes along.
From inside the cab you can scoop,
dig, and grab materials such as
large rocks, branches, debris etc.
and move them to a different
location within minutes. Neglected
cleanup jobs will disappear in front
of you while you operate a grapple
without ever getting out of your
seat!
telehandler & wheel loader GRAPPLE
FEATURES
• opens to 72” - handy for large
bails
• able to grab and move
almost
anything you can think of
• extra heavy duty construction
with AR400 materal
• Handles the most rugged jobs
BUCKET GRAPPLE
FEATURES
• handles it all: gravel, logs, garbage, large bales,
manure, brush, cement - the list is endless
• 2 hydraulic grabbers work independently to
hold uneven loads
• hardened cutting edge
• an all purpose tool, to turn your skidsteer
into a multi-purpose machine without
changing bits
• available from 48” to 96”
STONE FORK GRAPPLE
FEATURES
• available from 60” to 108”
• useful for stones and heavy debris etc.
• can be fitted on any front end loader
or skidsteer
• 39” conus II cranked tines
34” useable length at 4” centers
• original kverneland tines
MANURE / UTILITY GRAPPLE
FEATURES
• available from 60” to 108”
• useful for large bales, manure, debris,
logs, stones etc.
• can be fitted on any front end loader
or skidsteer
• 36” conus I cranked tines
31” useable length at 8” centers
Optional: 32” cranked tines,
26” useable at 8” centers
• original kverneland tines
6
www.martatch.com
GUIDE
GRAPPLES
PALLET FORK - single arm grapple
FEATURES
• excellent for laying landscape stones
• 7500 lbs. lifting capacity
• can be used for lifting skids
PALLET FORK GRAPPLE
FEATURES
• excellent for logging and fence posts
•a
vailable with adjustable forks 42” to 60” long
• 7500 lbs. lifting capacity
•h
ydraulic clamping arms clamp
independently to clamp uneven loads
• can be used for lifting skids
Optional: fence unroller will adapt to the side
of the grapple pallet forks
DEBRIS GRAPPLE 37”
FEATURES
• shown is 37” tines
• 69” to 106” widths
• 5½” opening between tines
• 48” grapple opening
• heavy duty ¾” plasma cut material
• available in single or double grapple
• hoses included
• 27” tines grapple available
DEBRIS GRAPPLE 27”
FEATURES
• 27” tines
• 69” to 106” widths
• 5½” opening between tines
• 39” grapple opening
• heavy duty ¾” plasma cut material
• available in single or double grapple
• hoses included
root rake grapple
FEATURES
• 48” to 80” widths
•p
lasma cut ½” AR400 high
tensile teeth
• teeth spaced at 8” centers
•a
vailable in 30” height,
single grapple
•a
vailable in 36” height,
double grapple
• hoses included
1-800-698-5510
7
Pallet forks
PRODUCT
Pallet forks can make handling your skidded materials much easier and
safer. Martatch offers you different options when you need to buy a pallet
fork. This way you can get the perfect match to your loader or skidsteer,
and the application, for the best cost. Contact us for more information on
our pallet forks. Don’t settle for less!
heavy duty pallet fork / bale spear combo
FEATURES
• an economical choice with 2 tools in one
attachment
• pallet fork, bale spear tines and safety
frames easily remove without tools
• 48” bale spear tines
• 42” and 48” pallet fork tines
• pallet fork tines adjustable for width
• standard class II forklift forks
8
www.martatch.com
Pallet forks
GUIDE
LIGHT DUTY PALLET FORK
FEATURES
• 3700 lbs. capacity - 50” frame
• tines adjustable for width
• 36” , 42”, and 48” fork lengths
• standard class II forklift forks
• s ee through back plate for ease of
pallet insertion at truck level
• anti-slip step
• 1¼” thick x 4” wide forks
REGULAR DUTY PALLET FORK
FEATURES
• 5500 lbs. capacity - 50” frame
• tines adjustable for width
• 36” , 42”, and 48” fork lengths
• standard class II forklift forks
• see through back plate for ease of
pallet insertion at truck level
• anti-slip step
• 1½” thick x 4” wide forks
HEAVY DUTY FORK
FEATURES
• 7500 lbs. capacity - 46” frame
• tines adjustable for width
• 36” , 42”, and 48” fork lengths
• standard class II forklift forks
• see through back plate for ease of
pallet insertion at truck level
• anti-slip step
• 1¾” thick x 4” wide forks
3-POINT HITCH PALLET FORK
FEATURES
• standard 3-point hitch mounts
• tines adjustable for width
• 36” , 42”, and 48” fork lengths
• standard class II forklift forks
PALLET FORK extensions
Pallet Fork Extensions
available from 54” to 96”
1-800-698-5510
9
PRODUCT
logging equipment
LOG GRAPPLE
FEATURES
• 40 - 80 hp and 80 - 100 hp models available
• grabs up to 30” logs
• chain swivel
• clamps on the main frame to keep grapple
from swinging when driving over
rough terrrain
• extra heavy duty construction
• front jaws to grab hanging trees to back drag
• grabs logs on one end for easy
piling (shown above)
Optional:
• hydraulic winch with 165’ 3/8” cable
• 8000 lb. pulling capacity at 25 gal/min
and 2700 lb. pressure
• 15 metres/min line speed
• free spooling
HYDRAULIC WINCH
FEATURES
• will handle any job from logging to
dead stock removal
• hydraulic 8000 lbs. free
spooling winch.
• 165’ by 3/8” logging cable at 15
metres/min line speed
• 25 gal/min/2700 lbs. hydraulic
pressure
• self anchoring plate
• brush removal blade
10
www.martatch.com
GUIDE
logging equipment
LIFT BOOM
FEATURES
• adjustable boom length
• pintle hook on end
• adjustable from 48” to 78”
• extended capacity 1500 lbs.
ROTARY CUTTER
FEATURES
• available in 60”, 72” and 84” for 30 to 100 hp
• high flow not needed
• lateral float & side shift
• adjustable side slides
• hardened cutting blades
• hydraulic motor 30 hp @ 20 gal/min with
40 hp gearbox
• can be fitted on any front end loader
or skidsteer
• easily adjusts without tools for
cutting along ditches, fences etc.
• safety chain guard
Optional: available with
front caster
flail mower
• available in 60”- 96” widths
• high flow not needed
• vertical float
• hydraulic motor 30 hp
- approx. 17–25 gallons / minute
• adjustable side sliders
MARTATCH PRODUCTS
ARE BUILT TO LAST!
1-800-698-5510
11
PRODUCT
LANDSCAPING
hydraulic arm ROTARY cutter
FEATURES
•d
esigned for mowing on uneven terrain along roadsides and laneways, etc.
• available from 54” - 66” wide
• f ront castor is standard to ensure even travel on uneven terrain
fertilizer spreader
FEATURES
• spreads fertilizer, salt, sand and seed
• front mount or 3 pt hitch mount
• hydraulic or PTO driven
• available from 100 L to 500 L capacity
LOADER MOUNT SPRAYER
FEATURES
• Front mount or 3 pt hitch
• 10’ fold away booms
• Hand gun sprayer
• 15 - 60 gallon tanks available
• Fold away booms up to
30’ available
Rototiller
FEATURES
• front mount or 3 pt hitch
• hydraulic or PTO driven
• 40” to 90” wide available
12
www.martatch.com
LANDSCAPING
GUIDE
TRAILER HITCH ADAPTER
FEATURES
• t railer hitch adapter for front end skid
steer or loader
•m
ove ball hitch trailers easily with your
front end loader or skid steer
• 4 way variable size ball or hook hitch
3 PT HITCH ADAPTER
FEATURES
•H
ookup to any 3 pt hitch equipment
with skidsteer or tractor
rotating hydraulic broom
FEATURES
•A
ngles both ways (manually
with pin)
• S weeps forward or reverse
into bucket
•D
ump swept-up debris by
tripping bucket manually
•A
fter dumping, bucket will
latch into place when sitting
on floor
•U
ses hydraulic motor to spin
broom
HYDRAULIC ANGLE BROOM
FEATURES
•e
xcellent for snow cleanup,
sweeping feed alley ways,
outside yards
•d
oes an excellent job without
creating dust
• hydraulic adjustable angle
1-800-698-5510
13
Snow Blades
PRODUCT
Snow removal with large tractors and blades is a growing market
due to large parking lots needing to be cleared with minimal delay
to businesses. Increase your efficiency and control with a Martatch
hydraulic end wing blade, or one of our heavy duty snow pushers.
Whatever the application, Martatch can suit you up with the best of
both worlds.
heavy duty hydraulic angle snow blades
FEATURES:
• spring trip cutting edge
• lateral float
• cross-over relief valve protection
• hydraulic angle 30 degrees both ways
• adjustable skid shoes
• reversible cutting edge for longer
wear life
AVAILABLE IN:
• 24” high - 60” - 96” wide - 30-50 hp
• 30” high - 72” - 108” wide - 30-80 hp
• 34” high - 108” - 168” wide c/w double cylinder - 60-120 hp
• 42” high - 144” - 192” wide c/w double cylinder - 90-200 hp
extra heavy duty construction
14
www.martatch.com
GUIDE
Snow Blades
PURE
CONVENIENCE!
The true name of Martatch’s compact tractor snowblades is convenience. Now you don’t have to spend your whole morning
shoveling your driveway only to have it snow again later that day. With
a Martatch snow blade on the front of your compact, you can have
your’s, and the neighbour’s driveway clean before your coffee is done.
Look no further!
hydraulic angle COMPACT snow blades
FEATURES:
• spring trip mouldboard
• lateral float
• cross-over relief valve protection
• hydraulic angle 30 degrees both ways
• adjustable skid shoes
• r eversible cutting edge for longer
wear life
AVAILABLE IN:
• 20” high mouldboard
• from 54” to 72” widths
• made to fit any loader
• for 20 - 35 hp. range
• available with undercarriage mount
1-800-698-5510
15
Snow pushers
PRODUCT
Martatch Snow-pushers are strictly designed for the contractor / farmer
that needs the best solution for a bare-bones price. Snow-pushers are
built with loader attachments specifically to your request or with a
bucket attachment. You can convert your loader tractor or wheel loader
to a snow removal machine in minutes for a low cost. Most buckets will
simply slide into the sleeves at the back of the snow pushers while
chains securely hold the pusher onto your bucket. This is definitely your
best bet for a simple conversion where versatility is important.
regular duty snow pushers
FEATURES:
• AR 400 material - replaceable skid shoes
• adjustable skid shoes
• spring trip cutting edge
Optional: spring trip end plates
• lateral float
AVAILABLE IN:
• 30” high - 96” wide - 30-50 hp
• 34” high - 120” wide - 40-90 hp
• 38” high - 168” wide - 80-120 hp
• made to fit any loader or bucket
16
www.martatch.com
GUIDE
Snow pushers
convert your loader
tractor or wheel loader
to a snow removal
machine in minutes
heavy duty snow pushers
FEATURES:
• AR 400 material - replaceable skid shoes
• adjustable skid shoes
• spring trip cutting edge
Optional: spring trip end plates
• lateral float
AVAILABLE IN:
• 42” high - 144” - 192” wide - 110-150 hp
• 48” high - 144” - 192” wide - 150-200 hp
• extra heavy duty construction designed for 150-200 hp wheel loaders
• made to fit any loader or bucket
1-800-698-5510
17
Snow blades
PRODUCT
The Martatch SNOW BRUTE snow pusher is a beefed up version of the
Heavy Duty Snow Pusher for 150 - 200 HP machines. Built with heavier
material and more strength, this is one serious contender in the snow
pusher market. One seriously heavy duty snow pusher for serious snow
pushers.
SUPER HEAVY duty snow-pushers
FEATURES:
• AR 400 material - replaceable
skid shoes
• adjustable skid shoes
• spring trip cutting edge
Optional: spring trip end plates
• lateral float
AVAILABLE IN:
• 42” high - 144” - 192” wide - 110-150 hp
• 48” high - 144” - 192” wide - 150-200 hp
• extra heavy duty construction designed for 150-200 hp wheel loaders
• made to fit any loader or bucket
18
www.martatch.com
GUIDE
Snow blades
Martatch Hydraulic End Wing Snowblades give you a significant edge
over any other conventional blade. From the cab you can windrow the
snow, then with the touch of a button you can setup your blade as a
box blade to push it to the far end of the lot. Even tight corners aren’t
an issue with this capable blade. Just swing the wings back and backdragging becomes easy and efficient. When hard-to-get-at spots are all
over your lot, don’t settle for anything less.
hydraulic end wing snow blades
FEATURES:
• blade wings hydraulically
extend from 0-180 degrees
• spring trip cutting edge
• lateral float
• cross-over relief valve protection on all 4 cylinders
• hydraulic angle 30 degrees both ways
• adjustable skid shoes
• reversible cutting edge for longer wear life
• round pipe bullnose edge on wings to
protect tires
AVAILABLE IN:
• 30” high - 72” - 105” wide - 55-85 hp
• 34” high - 96” - 168” wide - 80-155 hp
• wings are 30” deep
• extended wings add a maximum of 60” to
main mouldboard width
When hard-to-get-at
spots are all over
your lot, don’t settle
for anything less
1-800-698-5510
19
NEW STYLE
SNOW PUSHER
WITH BACK DRAG
Available in:
30” high, 120” wide (30-50 hp)
34” high, 144” wide (40-90 hp)
38” high, 168” wide (70-120 hp)
FEATURES:
• Available with Steel or Rubber cutting edge for back drag
• A must have for putlling snow away from doors, buildings or loading docks
• Spring trip cutting edge
• AR400 Adjustable shoes
take a bite out of
old man winter!
20
1-800-698-5510
Buckets - Page 3
Angle
Broom
- Page 13
Hydraulic
Winch
- Page 11
Bale Spears - Page 4
Stone Forks - Page 6
Snow Blade
- Page 14
Palette Forks - Page 9
Snow Pusher
- Page 16
Custom made attachments
to fit any loader or
skid steer.
1-800-698-5510
LOADER ATTACHMENTS
SKIDSTEER ATTACHMENTS
SNOW BLADES
Available At:
4350 Hessen Strasse, RR #3,
Wellesley, ON N0B 2T0 Canada
Phone: 519-699-4668 Fax: 519-699-5416
1-800-698-5510
Email: [email protected] Website: www.martatch.com