FREE SHIPPING for retail orders over $200 to capital cities

FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegMaster–GrandDeluxe(FullStainless)
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegMaster–Grand
Deluxe(Black
Enamel)
These Grand Deluxe Models
come in two different sizes. We
have a 2 door and also a 3 door
model.
These model feature:
• Internal LED Light
• Full Stainless Steel Internal Lining
• Integrated Font Fan Assembly
• Integrated Drip Tray
• Powerful Italian made Embraco compressor
• Locking Doors
• 304 Grade Stainless Steel Counter
• Pre-Drilled Holes for the Fonts
IF YOU REQUIRE MORE INFORMATION EMAIL US FOR A SPEC. SHEET
NOTE: FONT AND TAPS, ARE SOLD SEPARATELY.
Part Number
RRP
007513 - GD125
$1499.00
007537 - GD185
$1999.00
AVAILABLE
SEPTEMBER
Now With Full
Length Drip
Tray
These Grand Deluxe Full Stainless models are made with the top of the line Danfoss
Secop r404 compressor so this unit can chill down to -20C. These units have
absolutely no trouble chilling kegs in the hottest of climates where ambient
temperature frequently reaches 40C.
GrandDeluxe–GlassDoors
This unit is also made inside and outside with 304 grade stainless steel making it
ideal for commercial customers.
We also sell the upgrade to glass doors for the
GD125 and the GD185. The glass doors are double
glazed toughened glass and are made with an
anodized aluminum trim.
IF YOU REQUIRE MORE INFORMATION EMAIL US FOR A SPEC. SHEET
NOTE: FONT AND TAPS, ARE SOLD SEPARATELY.
Part Number
RRP
007513 - GD125
$2499.00
As well as looking great the glass doors are a
practical option for installations in a commercial bar
or restaurant.
The GD125 has a left and right and door.
The GD185 has one left and two right hand doors.
NOTE: The doors are not compatible between the
two different fridge models as the GD125 and the
GD185 have slightly different door openings.
Part Number
007544 – GD-125 Left Glass Door
007551 – GD125 Right Glass Door
007568 – GD185 Left Glass Door
007575 – GD185 Right Glass Door
Page 1 of 67
AVAILABLE
SEPTEMBE
R
RRP
$99.00
$99.00
$99.00
$99.00
Page 2 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegMaster–Series3
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
A–TypeKegCoupler
Includes:
• PREMIUM MKII CO2 regulator
• Gas splitter for 2 tap and triple tap model
• Single, double and triple font model available
• 1, 2, or 3 Forward Sealing Acetyl Draft Taps included
• Guard rail &Drip tray
• Gas and beer line
• Wire shelves
• Castor wheels
• CO2 cylinder mounting bracket
• Some hose clips, tap tool, spare seals
Other Kegerators Features
• -4C and up to 28C
• Air circulation fan and digital thermostat
• Metal Floor Protector
• 62cm (width) x 61cm (depth) x 91cm (height excluding guard rail, fount and drip tray)
• Approx 164L fridge
Part Number
006554 (single tap model)
004017 (double tap model)
006561 (triple tap model)
RRP
$589.00
$599.00
$634.95
Includes:
• Beer and gas valve
• Beer and gas barbs
Also known as German slider, Tooheys, Coopers, XXXX
keg coupler.
Part Number
004147 – Stainless Steel/Alloy
RRP
$79.95
NickelCoated&FullStainlessSteelD-TypeKegCoupler
Includes:
• Beer and gas valve
• Beer and gas barbs
Also known as American sankey coupler, CUB, Fosters,
Carlton Draft, VB coupler.
Part Number
RRP
004130 – Nickel Coated Alloy
$59.95
006196 – Full Stainless Steel
$69.95
S-TypeKegCoupler
Includes:
• Beer and gas valve
• Beer and gas barbs
Used for Heineken, Asahi, and some other imported and
local beers.
Part Number
004154 – Nickel Coated Alloy
RRP
$59.95
LowProfileElbowBend
This low profile elbow bend is THE LOWWEST elbow bend
available in Australia.
It only sits 17mm
above the top of the
keg coupler. Perfect
for tight spaces or
inside a kegerator.
• Made from solid Stainless Steel
(picture shown on coupler to right)
Part Number
RRP
004765
$ 24.95
Page 3 of 67
Page 4 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
FREE SHIPPING for retail orders over $200
to capital cities
4Tap‘Tee’Font–CommercialGradeStainless
Double&TripleTapChromeFont(withouttaps)
Features:
• Commercial grade 304 stainless
Features:
• Internal foam insulation
• 78mm diameter
• Single: 300mm height (without taps)
• Double: 310mm height (without taps)
• Triple: 390mm height (without taps)
Part
Number
004161
Note: Does not include draft taps as shown in
photo (left&right)
Part Number
004055 (single tap)
004062 (double tap)
004109 (triple tap)
RRP
$39.95
$59.95
$79.95
Single,Double&TripleFontKit
(packedwithtaps,beerline,clamps,andfaucettool)
This complete font kit includes font, beer taps, 4 meters of beer
line per tap, some clamps and a faucet tool. We sell a single,
double and triple tap font kit and the whole set of gear works out
to be great value.
Kit Includes
• Chrome plated font
• Acetyl forward sealing taps
• 4 meters of 5mm ID beer line per tap
• Faucet tool
• Stainless Clamps
Part Number
006592 (single tap)
006608 (double tap)
006615 (triple tap)
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
RRP
$169.95
CobraSingle,Double,&Triple
TapFloodedFont–Commercial
Grade
Fonts include a glycol coolant loop to chill down
the font. This type of font is ideally used with an
icebank or glycol chiller (such as our Icemaster
225).
Give your bar at home a professional look with
these solid built cast brass and chrome plated
fonts. Each font comes with 1, 2 or 3 product lines
plus 2 additiona coolent lines that run up and down
the font to keep the beer lines chilled in the font.
Part Number
007230 (Single Cobra Font)
004178 (Double Cobra Font)
007230 (Triple Cobra Font)
RRP
$159.95
$169.95
$189.95
FontFanKit
RRP
$59.95
$89.95
$115.95
These font fan kit is the easiest way
to chill the font of your kegerator.
The kit includes a 12volt power
pack, the blower box that blows air
up the provided tube into your font.
The blower box can just sit in the
kegerator as shown in the photo (to
the right).
This will cool your font down and
reduce any foaming issues you
might have caused by a warm font.
The fan also increases air
circulation in the fridge which will help get your kegs in the
fridge colder quicker. In many instances it will reduce the serving temperature of the
beer by as much as 3 degrees Celsius.
Part
RRP
Number
004253
$49.95
Page 5 of 67
Page 6 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
CarbonationCap
FREE SHIPPING for retail orders over $200
to capital cities
CorneliusTypeBallLockPostforKegCoupler
This carbonation cap is a screw-on cap with an integrated Cornelius ball
lock fitting. It is designed to fit onto most soft drink PET bottles. The
carbonation cap is highly effective method to add and maintain
carbonation in beverages for extended periods of time. Made from 304
Stainless Steel the carbonation cap will last years of use with virtually
no maintenance.
These new parts are extremely handy so you can
connect you ball lock disconnects to your keg
coupler.
The part is basically has a 5/8” thread on one side
and on the other side it has a ball lock disconnect
post.
With this cap you can simply fill an old PET bottle with cold liquid of your
choice and carbonate by connecting your gas ball lock disconnect.
Make your own soda water, carbonate beer, or even make your own
soft drinks.
Part Number
005458
RRP
$14.95
GREAT NEW PRODUCT
The part is completely made from solid stainless
steel.
Part Number
005465 (Gas)
005472 (Liquid/Beer)
RRP
$14.95
$14.95
Carbonation&LineCleaningCap&CounterPressure
BottleFillingDevice
This new model carbonation cap does
everything that the carbonation cap does(above) but
this comes with several added features.
The post on this unique carbonation cap has been
machined so it fit BOTH the black and grey ball lock
disconnects. This carbonation cap also includes a
barbtail on the underside so you can attach some beer
line to act as a dip tube. This allows the carbonation
cap to be used in several different ways including:
1. Carbonate
2. Cleaning your beer lines
3. Use it to counter pressure bottle fill PET bottles
WATCH THE VIDEO WITH THIS LINK:
https://www.youtube.com/watch?v=KQg8Qb3OS7U
Part Number
007346
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
RRP
$19.95
Page 7 of 67
Page 8 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
DraftTaps
NewForwardSealTypeTaps
Above (left to right): Flow Restrictor Draft Tap(004093),Regular Draft
Tap(004079), Long Shank Draft Tap(004086),Long Shank Tap with Flow
Restrictor (004192)
Right: Full Stainless Steel Brumby Style Tap with Stainless Handle (005533)
The regular draft tap is what you will need to attach to most fonts. The flow
restrictor tap is similar to the regular draft tap with the main difference being
able to control the resistance in the line with a leaver on the right hand side
of the tap. We also offer a brumby style tap in Full Stainless Steel which is
commercial grade.
The long shank taps are for people who would like to make their own
Kegerator or mount the tap into a cool room wall or fridge door. Just drill a 21mm
hole and the shank will slot straight in.
Part Number
004079 (Regular Brumby)
004093 (Flow Restrictor)
004086 (80mm Shank
Brumby)
004192 (80mm Long Shank
Tap with Flow Restrictor)
005533 (Stainless Brumby)
RRP
$29.95
$49.95
$39.95
$69.95
$49.95
These unique “seal forward” taps eliminate the need for a
valve shaft like other less sanitary taps. Beer is
not exposed to air so the handle does not stick
and there is no build-up of mould and bacteria
in the tap body. The polished interiors makes
smooth flow to ensure perfect pour. These
taps are available in a stainless steel
(part#6332) and Acetyl plastic (part#6349) and
long shank (part#6752). These taps include
shanks and are spring return so the tap closes when you let
go the handle.
Part Number
006332 (Stainless Forward Seal tap)
006349 (Acetyl Forward Seal Tap – short shank)
006752 (Acetyl Forward Seal Tap - 80mm long
shank)
RRP
$49.95
$24.95
$24.95
PlutoBeerGunwithBarbFitting
These pluto beer guns have become an iconic beer
dispensing tool used throughout the industry.
We now offer 2 types. We have a full stainless
steel type (as seen on left) and also a new plastic
stainless composite (as seen on right). They both
come with barbs so they will fit all standard beer
line (4mm-6mm ID). The new plastic/stainless
composite beer guns have a strong ABS plastic
body with stainless barb, stainless piston and stainless spring.
Part Number
004741 (full stainless)
005960 (plastic/stainless composite)
Picnic/BroncoPartyTap
DecalHolder
Part Number
006028
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
These decal holders
are literally made to
support your brand
name. The 35mm hole
at the bottom of the
older just slips right
over your tap collet
and the grub screw on
the underside holds it in place. The holder will support a
sticker or decal up to 73mm in diameter.
RRP
$19.95
Page 9 of 67
This standard, black plastic hand held picnic tap is the first choice for
many BBQs or university parties.
Most commonly called a "picnic faucet” this simple to use beer tap
comes with a 6mm Barb which will ideally suit 5mm ID beer line.
Part
Number
007285
RRP
$3.95
Page 10 of 67
RRP
$69.95
$24.95
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
DeluxePartyPumpKit–(PicnicPump)
PerlickBrandTaps
Easy way to dispense a beer keg when you are away from
electricity. No bulky CO2 cylinders to worry about. Just put the
keg in a bucket of ice and pump the beer out at your own leasure.
These original Perlick brand taps are
done in either stainless steel (525SS) or
chrome plated brass (525PC). We can
either sell the taps without shank (as
seen in picture top right), with short
shank to mount into a font (as shown in
picture to the left), or with a long shank to
mount through a fridge door or esky wall
(as shown in photo to bottom right). All
these taps include the black plastic tap
handle.
Part Number
RET9354 – 525SS (with long shank
100mm)
RET9361 – 525SS (with short shank)
RET9378 – 525SS (tap only)
RET9385 – 525PC (with long shank
100mm)
RET9392 – 525PC (with short shank)
RET9408 – 525PC (tap only)
Features
• Ergonomic design
• Easy to use
• No gas cylinder required
• No electricity reguired
Note: Does not include keg coupler or keg as shown in photo
(left). These are sold separately.
Beer must be consumed within 48 hrs of using the pump.
RRP
$72.95
$67.95
$52.95
$55.95
$49.95
$34.95
YouTube Link on how to use this product: http://youtu.be/u92RFu9QByQ
Part Number
RRP
004048
$109.95
PartyPumpKit–(PicnicPump)
This unit does exactly the
same job as the “Deluxe
Party Pump” with the main
difference being the tap. The
tap is just a plastic tap and
beer line.
3in1FaucetSpanner
This handy tool is exactly what
you need to fit your beer taps to
your font. The spanner is a 3 in
1 tool and will fit:
Note: The price does not
include keg coupler. This is
sold separately.
1. Will fit 27mm nut to attach the tap to your font. (see picture to
right)
2. Will fit 5/8inch hex nut that will attach to the back of the tap
shanks or keg couplers.
3. Will fit the ring collar that tightens the faucet to the tap shank. Part Number
RRP
RET9736
$5.95
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
YouTube Link on how to use this product: http://youtu.be/u92RFu9QByQ
Part Number
004031
RRP
$59.95
Page 11 of 67
Page 12 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
CounterPressureBottleFillerKit
DomedStainlessSteelFalseBottoms
Have you ever wanted to take some of your keg brew
with you to a mates house? Now you can with the
new Keg King Counter Pressure Bottle Filler.
This type of bottle filling technology is normally only
accessable to large breweries but now the same
counter pressure filling tecneques can be used at
home so you can fill you bottle of beer right from the
keg to bottle with no exposure to oxygen, and without
losing any carbonation, or loss of beer through
fobbing.
Features: Foam free filling from keg to bottle, bleed valve so to purge CO2 from the
bottles that you fill, font mountable, barbs for CO2 inlet, beer inlet, and blow off valve,
will fit almost any PET soft drink bottle and many types of glass bottle.
Part Number
004758
RRP
$69.95
BottleFillerBeerGun
Fill bottles quickly, easily,
without the risk of oxygenation
and without complicated
counter pressure filling
equipment. This easy to use
Bottle Filler Beer Gun works
with almost any bottle size and
shape. The gun comes with
two triggers. One that will
purge the bottle of oxygen and
the other that will dispence the
beer. This gun is also suitable for win bottling or dispencing directly into glass for
immediate drinking. For more information on this product CLICK HERE.
NEW
The Bottle Filler Beer Gun includes beer line, 2 stainless clamps and the gun itself.
Page 13 of 67
Now Larger Sizes
These false bottoms are great for anyone trying to
make their own mash tun or lauter tun. The 30cm
diameter type will fit into any 50L type keg
including standard CUB(EURO Keg) or Tooheys
(DIN Keg) designs. The 40cm diameter usually
good for puts up to 100L and the 50cm design is
suitable for our 200L brewery pots (Part#:007735).
Features: Full stainless steel with 13mm stainless steel barb and ½” elbow.
Part Number
RRP
004598 (30cm)
$49.95
007810 (40cm)
$59.95
007827 (50cm)
$99.00
PolyesterBrewinaBagBagsandHopSocks
These polyester brew in a bag bags are perfect for
grain brew in a bag or for hopping beer. Two sizes
are available (both can be used up to 110 C).
Large Brew in a Bag Bag with draw string: This
is made to line your pot up to 55cm in diameter.
(dimensions 80cm wide x 55cm deep)
Small Bag/Hop Sock: This is a tube of fabric that is 15cm in width
and 75cm long. Both ends are open for easy cleaning and can
simply be tied closed while being used. Perfect for grain or hops.
Part Number
RRP
005342 – Hop Sock/Small Bag
$4.95
007407 - 20 x Bulk Buy Hop Socks
$24.95
All components in contact with beer are made from stainless steel or silicone.
WATCH THE VIDEO WITH THIS LINK:
https://www.youtube.com/watch?v=U1HYrgRhA-4
Part Number
007124 – Bottle Filler Beer Gun
007131 – Replacement Silicon Tip
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
RRP
$74.95
$1.95
Part Number
005359 – Large Grain Bag
RRP
$9.95
PressurisedBeerLineCleaningBottles
These bottles are the easiest solution to
wash out your beer line. Just screw the top
off, put in your beer and line cleaning solution
and attach your keg coupler. Once you have
done this repeat step with warm water to
flush solution out. Think of this item as a
1Litre keg that you use for cleaning solution.
Available for D-type, A-type, S-type, and Gtype keg couplers.
Part Number
005540 (D-type, CUB, Fosters)
005557 (A-type, Tooheys etc.)
005564 (S-type, Imported Beer)
RRP
$29.95
$29.95
$29.95
Page 14 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
NestedMashBrewing60/40LPotsforSingleVessel
Brewing
These single vessel brewing pots are great for mash brewing.
The aluminium is more conductive than stainless pots making
these pots idea for direct heat. The pots
come as a set with a large 60L outter pot
with lid and a nested inner 40L inner pot
that has a perforated false bottom. This
allows you to place grain in the inner pot
for mashing. When finished mashing
QualityStainlessSteel
ReinforcedBasePot
These stock pots are made from
stainless steel with triple base
construction. That means each base has
a layer of aluminum inside to even out
the temperature. This reduces the
chance of scorching or caramelising your
wort. It also reduces the chance of boiling over.
simply lift out the inner pot and use the outter pot to boil. The
assembly can also be used in conjuction with RIMS heat stick and
pump to upgrade this to a recirculating system in the future.
Part Number
006462
RRP
$199.95
SodastreamCylinderAdapter
Use a Sodastream
cylinder to
dispense/carbonate
your kegs. This is the
ideal unit for the low
volume user, or
someone who does not want to put a lot of
capital into purchasing a larger CO2 Cylinder. The adapter fits between the soda
stream cylinder and the CO2 Regulator as shown in photo above.
Features:
• 1.0 - 1.2mm thick stainless steel wall
• Triple bottom base (stainless/aluminum/stainless)
• Heavy duty handles
• Included commercial grade lid
Part Number
004536 (29 litre )
004567 (92 litre)
RRP
$ 199.00
$ 369.00
Soda stream cylinder adapters are also great for small portable keg setups.
Part Number
004772
RRP
$ 22.95
Page 15 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Page 16 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
ResinTapHandles
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
DoorMountedDripTrays
NEW
LOW
PRICE
Wanting to pimp up your taps. Try one of these coloured resin tap handles. Available
in a wide range of colours as shown above. They will fit any one of our draft taps.
Size: 145mm tall x 28mm diameter
From left to right: Yellow, Blue, Orange, Purple, Red
Part Number
004024
Features:
• Made with high quality stainless steel
• Excellent craftsmanship
• Removable grill
Available in different widths
• 20cm Width (004420)
• 30cm Width (004437)
• 40cm Width (004444)
Part Number
004437 (30cm)
004444 (40cm)
RRP
$59.95
$63.95
RRP
$5.95
40cmCounterSunk/RecessedDripTray
NEW
These counter sunk drip trays are made for
304 grade stainless steel. They are
designed so that you can cut a hole in your
counter/bar top and have the top of the drip
tray flush with the top of your bar.
There is a drain in the centre of the drip tray
so that a 10mm ID tube can be attached on
the underside of the tray.
The drip tray is 40.5cm x 17.0cm and you
will need to cut a hole in your bar top that is
15.3cm x 39.0cm in order to counter sink
this into the hole.
Part Number
007728
Page 17 of 67
RRP
$39.95
Page 18 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
CounterTopDripTray
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
2.6kgand6.0kgCO2GasCylinders
Features:
• Made with high quality
stainless steel
• Excellent craftsmanship
• Removable grill
Features:
• Australian Standard Approved
• Hold 2.6kg or 6.0kg of gas when full
• 47cm in height for 2.6kg and 71cm in height for 6.0kg
• 2.6kg will fit in Keg Master Series 2 and Series 3
Kegerators without reducing the number of kegs it can hold
• Comes with included carry handle for easy of transport and
protection of valve
Available in different widths
• 30cm Width (004468)
• 60cm Width (004475)
Part Number
004468 (30cm)
004475 (60cm)
RRP
$39.95
$59.95
WrapAroundDripTray
These wrap around drip trays are made
to suit our fonts. The drip trays wrap
around the font to make sure they catch
all of the drips. They also look great.
There is 2 types, full stainless and
stainless/plastic.
Full stainless (left): 17.7mm x 30.5cm x 2cm deep
(cut away diameter is 12cm)
Plastic/stainless (right): 31.5cm x 20cm x 2cm deep
(cut away diameter is 9.5cm)
Part Number
RRP
004482 (plastic/stainless)
$29.95
006684 (stainless)
$39.95
Part Number
004345 – 2.6kg Cylinder (Full)
2.6kg Fill
RRP
$199.00
$25.00
004352 – 6.0kg Cylinder (Full)
6.0kg Fill
$249.00
$50.00
30LWideLidFermenter–WithAirlock,
Grommet,TapandThermometer
NEW
These 30L pail style fermenters are sold complete with airlock,
temp sticker and tap. The smooth walls are easier to clean
compared with other blow molded fermenters that have quite
porous walls.
The fermenters are made from food grad PP (polypropylene)
which is BPA free.
We do also sell additional airlock, stickers and taps separately.
(See picture to left)
FloodedDripTray
Features:
• Removable grill
• Drainage hole
• 33cm wide x 40cm deep
Part Number
004406
RRP
NA
Page 19 of 67
Part Number
007353 - 30L Fermenter with
Airlock, Thermomenter, & Tap
RET0061 - Stick On Thermometer
RET0054 - Airlock
RET0078 - Tap
RET0085 - Grommet
RRP
$29.95
$2.50
$4.95
$2.95
$0.95
Page 20 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
StainlessSteelConicalFementers
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
QualitySolidStainless100mmWeldlessThermowell
Features:
• Fully rotatable rack arm
• Silicone beaded seals
• 304 Stainless steel
• Polished finish
This weldless thermowell is made
from solid 304 stainless.
It has a straight ½” BSP thread
which is 40mm Long. It includes
silicone o-ring, stainless steel
slimline nut and also the extra long
nut for mounting directly to our 3
inch dial thermometers.
Ideal for yeast propagation,
professional pilot plant, or serious
home brewer.
This thermowell can also be used in conjunction with out digital temperature
controllers. The probe will slight straight into the thermowell.
Part Number
RRP
005311
$34.95
Please email us for drawing and
specifications.
Bi-Metal3”DialWeldlessThermometer–Long&Short
Stem
NEW LOW PRICE
With this Keg King bi-metal thermometer
you can brew with confidence. The weldless
fitting means it will mount to your mash tun,
hot liquor tank, or kettle.
NEW SHORT STEM
Part Number
006509 (50L)
007025 (100L)
006059 (300L)
006790 (300L Jacketed)
006066 (600L Jacketed)
RRP
$599.00
$945.95
$3450.00
$4850.00
$6900.00
1.5InchTriClover
Accessories
1.5 inch tri clover accessories
in 304 stainless steel. These
are for the 50L and 100L
fermenters.
We have both the
132mm long stem
(right) or the 40mm
short stem (below)
available.
NOTE: This is also compatible with the thermowell above or
the plastic push-in bulk head below.
Features:
Calibration screw, 304 stainless steel housing and probe, ½” BSP thread, includes
nut and 2xsilicone seals plus stainless washer, -5C to 100C customised for brewing.
Part Number
RRP
005328 (Long Stem)
$29.95
007605 (Short Stem)
$29.95
BulkheadforTemperatureProbe
Part Number
007247
007254
007261
007278
007360 (1.5inch Clamp)
RRP
$14.95
$19.95
$4.95
$1.29
$8.95
Page 21 of 67
This simple bulkhead fitting is made from plastic and can be used
to mount your temperature probe from the temperature
controllers or the 3” dial thermometers into a any thin wall vessel
(such as a pot or fermenter. It will accept any temperature probe
or thermometer with 6-6.5mm diameter.
It is sutable for temperatures up to 1050C.
Part
RRP
Number
005335
$12.95
Page 22 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
16ampTempControllerwithInbuiltAlarm,Heat&Cool
Designed for commercial
use
Includes:
• Temperature Probe
• Instructions
• Control Panel
Mounting Bracket
Features:
• Broad temperature
operating range
(-45oC – 120 oC) and high accuracy.
PRICE ADJUSTMENT
• Comes with included temperature probe
• 0.1 oC Accuracy
• High and Low Temperature Alarm with Optional Alarm Delay
• Celsius and Fahrenheit display option
• Independent Heating and Cooling Delay Start Control
• 16amp Heating or Cooling capacity
• Inbuilt alarm
• “Fridge On” or “Heater On” Indicator Icon
YouTube Link on using this product: http://youtu.be/5ha5gsI8Gb4
Part Number
RRP
004246
$74.95
DigitalOvenThermometerwith
NEW
StainlessProbeandAlarm
These inexpensive digital oven thermometers go from 00C2500C. The magnet of the back of these enables you to
stick them to your fridge or brewery. The thermometer
probe is on a heat resistant stainless braided cord that is
120cm long can go up to 3000C and the stainless probe is
4mm diameter
The thermometer also comes with a temperature alarm and a time alarm. So you
can set an audible alarm to go off at a specific set temperature or a use the
countdown timer.
Part Number
RRP
007742
$13.95
FREE SHIPPING for retail orders over $200
to capital cities
KegKingChilloutMKIII-30PlateHeatExchanger
The Chillout MKIII is the fastest way to chill your
wort to yeast pitching temperature to get your
fermentation off to a quick healthy start.
The Chillout is made from stainless steel and
brazed together with pure copper. It also has
ripples up and down each plate. This creates
more surface area and improves heat transfer.
Dimensions:
315mm x 73mm x 73mm
Part Number
005304
RRP
$119.95
14MeterStainlessSteelImmersion
Chiller
These stainless steel immersion chillers are an easy way to
chill your wort. Simply connect standard ¾ inch BSP
garden hose fittings to the end and run tap water through
the chiller while immersed in your wort. This is idea for
batch sizes up to 45litres.
Dimensions:
Coiled part of the chiller: 28cm high x 26cm diameter
Total height of the chiller: 65cm
12mm x 14meter 304 Stainless with ¾” BSP female/male
fittings
Part
Number
006707
RRP
$195.00
30WattHeatingBelt
The 30 watts will gentle warmth without creating a hot spot. Heating
belts are preferable to heating pads for the reasons that they can
simply be moved up or down the fermenter to increase or decrease
the heat transfer to the brew. Heating belts are also preferable to
heating pads because pads tend to heat up the yeast bed on the
bottom of the fermenter which can produce some undesirable
flavours in your beer.
Part Number
004574
RRP
$19.95
Page 23 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Page 24 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
16mStainlessSteelCoolingCoil
Now includes MFL
threaded fitting
Features:
• Made from food grade 304 stainless steel
• Ideal for chilling beer or creating your own
jockey box
Specifications
- Stainless: Food grade 304 stainless steel
- Internal diameter: 6mm
- External diameter: 8mm
- Total Coil Height/Diameter: 19cm/25cm
- No include 1/4inch MFL threaded fittings
so you can connect parts#006004 or part#005281
Part Number
004116 (Cooling Coil)
007445 (Spare 8mm
Compression Fitting)
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
10inchBeerFilteringSystem
Features:
• Clear high pressure housing
• Purge valve to expel air pockets
• ½” BSP inlet and outlet
• Includes brass ball valve
• Brass threaded ports for durability
• Compatible with other 10” filter systems
RRP
$119.00
$9.95
JockeyBox/MagicBoxCoolerKit
These jockey box kits include:
- Long shank draft tap
- 16meter stainless cooling coil (as above)
- 2 x push in fittings to attach your beer line to the coils
- Beer Line
All you need to do is BYO esky and drill holes in your esky.
If you want 2 taps in your esky you will need to purchase 2
kits. Kit’s include usage and assembly instructions. If you
would like a PDF copy of the instructions just email us.
Note: Does not include filter cartridge.
Part Number
004512
RRP
$24.95
1MicronAbsoluteReinforcedWashable
Cartridge
Features
• 10inch for compatibility
• Indestructible PE reinforced plastic shell to protect your filter
from rupturing, or physical damage.
• Washable (recommended wash with Sodium Percarbonate)
• 1 micron absolute rated for most efficient filter action.
Part Number
RRP
004529
$19.95
0.5Micronand2MicronStainlessSteel
DiffusionStone/AirStone
Use this 2 micron stone with an oxygen source or an aeration pump to
provide your yeast with oxygen prefermentation.
Part Number
RET9644
RRP
$158.95
This 0.5 diffusion stone can also be attached to the end of your “gas in” on
your keg with 50cm of tubing to rapidly speed up carbonation.
CLEANING: This stone can be sanitised in boiling water and cleaned in a
non-rinse sanitiser while running CO2 or air through the stone. If the pores in
the stone get blocked from handling give a 10 second dip in hydrocloric acid
before rinsing with water.
Part Number
005298 (2 micron)
006660 (0.5 micron)
Page 25 of 67
RRP
$11.95
$11.95
Page 26 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegKingCO2Regulators(0-80psi)
RegulatorDoubleAdapter
Features
• Dual gauge
• Australian standards
• Easy to adjust
• Included ball lock
• Safety pressure release valve
Part Number
004208(1 output)
Unlike the Add-On Regulator adator
above this simple double adaptor will
allow you to attach 2 regulators to the
one gas cylinder without having to
modify either of the two regulators.
RRP
$59.95
MKIIDualGuageMultiGasRegulator
CO2,Oxygen,Argon,Nitrogen
This new MK II regulator is made with high
quality machined brass body and can be used
on various different gasses. The regulator has
large body for high flow rates and comes with
precision diaphram for more accurate
adjustment. Regulator also includes large
adjustment know for easy adjustment. This
regulator is can also be used on a range of
different gasses including CO2, Oxygen, Argon, Helium and
Nitrogen. The standard “type 30” nut and stem comes fitted to the regulator for CO2
and CO2/nitrogen mixed gasses. Other nut and stems and be interchanged:
Type 10 Nut and Stem (with ¼” thread NPT): Oxygen, Argon, Helium
Type 30 Nut and Stem (with ¼” thread NPT): CO2, CO2/Nitrogen Mixed Gas
Type 50 Nut and Stem (with ¼” thread NPT): Nitrogen
Part Number
RRP
006325 - Multi Gas Regulator
$64.95
006448 - (type 10 – nut & stem)
$29.95
006042 – (type 30 – nut & stem)
$29.95
006455 - (type 50 – nut & stem)
$29.95
004321 – Replacement 0-3000psi Gauge
$9.95
004338 – Replacement 0-80psi Gauge
$9.95
Simply screw the double adaptor onto
your gas cylinder then attach the two
regulators.
Part Number
RET3468
RRP
$ 44.95
Add-OnCO2RegulatorAdapter
Ideal for dispensing two draft beers that
require different CO2 pressures. Modular
design makes expension easy.
Simply remove the high pressure gauge from
one regulator and screw this adapter. Then
attach your other regulator directly to the
other side of this adapter. The two threads are ¼”
NPT and Type 30 UNF to suit our CO2 regulators
and many other Australian CO2 regulators.
Part Number
RRP
006189
$ 24.95
Page 27 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Page 28 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Beer&GasLine30mRoll
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
JGStylePushinFittings
Quality beer/gas line.
We make all our push in fittings to suit
8mm (5/16) outside diameter (OD) beer
and gas line. Just like the Beer/Gas line
above.
The internal walls are very smooth creating
less turbulence.
The 3 sizes available all have the same OD
so it will easily fit any John Guest style
push in fittings (5/16” or 8mm). The beer
line comes in three different sizes 4mm,
5mm and 6mm ID.
This line is also hydrochloric acid,
phosphoric acid, and caustic resistant.
Part Number
005083 4mm ID x 8mm OD - 30m Roll
005182 4mm ID x 8mm OD - Per Meter
005090 5mm ID x 8mm OD - 30m Roll
005199 5mm ID x 8mm OD - Per Meter
005106 6mm ID x 8mm OD - 30m Roll
005205 6mm ID x 8mm OD - Per Meter
RRP
$25.00
$0.99
$25.00
$0.99
$25.00
$0.99
FoodGradeClearVinylTube
This food grade vinyl tube is sold per meter or
by the 30m Roll.
It is more malleable than the beer and gas line
(above) and comes in three different sizes:
5mm ID x 8mm OD
10mm ID x 14mm OD
13mm ID x 17mm OD
Part Number
6950 5mm ID x 8mm OD - 30m Roll
6967 5mm ID x 8mm OD – Per Meter
6974 10mm ID x 14mm OD - 30m Roll
6981 10mm ID x 14mm OD – Per Meter
6998 13mm ID x 17mm OD - 30m Roll
7001 13mm ID x 17mm OD - Per Meter
RRP
$25.00
$1.50
$40.00
$1.95
$45.00
$2.49
These push in fittings are suitable to be used up
to 100 psi. They are extremely easy to use and allow you to
simply push your beer and gas line straight into these fittings.
No need to purchase clamps. To remove the fitting simply
push in the blue collet and the fitting comes undone.
Part Number
005410 – Push in Joiner
005397 – Push in Tee Piece
005403 – Push in “Y” Piece
006424 – Push in Ball Valve
005380 – Push in Elbow
8mmPushinFittingsforMFLDisconnects&5/8BSP
Thread
These great little adaptors screw directly
onto your keg setup. They allow you to
push your beer/gas line with 8mm OD
(5/16”) directly into the fitting. This
makes it easy to disconnect the beer/gas
line at a later stage and it eliminates the
need to use hose clamps. We have two
sizes. The smaller type (shown on left)
that will fit MFL Quick Disconnects and also larger ones that
suit 5/8” BSP thread that is on our keg couplers, tap shanks
and many other beer related fittings.
Part Number
006004 – Push in for MFL Disconnect
006011 – Push in for 5/8” Thread
RRP
$4.95
$5.95
8mmPushinFittingx1/2inchBSP
These push in fittings will screw right into any 1/2inch BSP
thread and allow you to push any 8mm beer or gas line directly
into the fitting.
! NEW !
Part Number
007094
RRP
$5.95
Page 29 of 67
RRP
$5.95
$5.95
$5.95
$9.95
$5.95
Page 30 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
StainlessSteplessClamps
These stainless clamps are the best for securing your beer and
gas line to barbs/nipples. Unlike other hose clamps the secure
the line in a complete and exact circle. Hence the name
“stepless” clamps.
We have two sizes. The 6-8mm will suit our 5mm and 6mm ID
beer line. The 7-10mm ID will suit our 4mm ID beer line.
The clamps can be secured with a special crimping tool (part#6530) however normal
wire cutters work just as well.
YouTube Link on how to use these clamps: http://youtu.be/bvCCC6TkqOs
Part Number
RRP
RET0764 (suit 6-8mm OD)
$0.50
RET0771 (suit 7-10mm OD)
$0.50
GasLineSplitters
These gas line splitters are sold as
single pieces as shown in picture on
the left. By purchasing more pieces
you can split your gas line into as
many outputs as you like. The fittings
just simply push into each other and
require no clips, or additional parts.
GasLineManifoldSplitterwithCheck
Valves
$9.95
They are made complete from aluminium, brass and
stainless so you know they are durable. They also include screw
holes at the top for easy mounting to your gas board.
Each ball valve also includes a built in check valve to not only protect
your regulator but also prevent gas or beer migrating from one keg to
another.
Part Number
007148 (2 way)
006677 (4 way)
007155 (6 way)
RRP
$23.95
$39.95
$64.95
! NEW !
The manifolds all come standard with 2, 4 or 6 output. These
can be converted to 3, 5, or 7 output by simply unscrewing the
1/4inch plug from the end of the manifold and
inserting an additional 1/4inch ball valve (as
shown to right).
We do also supply the 1/4inch plugs if
you want to to the opposite and convert
a 4 or 6 way into a 3 or 5 way.
Part Number
007162 (1/4inch Ball Valve)
RET9460 (1/4inch Plug)
RET3741 (1/4inch Nipple)
RRP
$7.95
$3.50
$3.50
Page 31 of 67
! NEW !
These gas manifolds are rated to 100psi and include 2 or 4
or 6 gas line outputs with 1/4inch ball vales. Multiple of
these can be easily joined together to make large manifolds
of 8 or 16 outputs.
Multiple gas manifolds can be connected
together using some ¼ inch hex nipple
(Part#:RET3741). This will enable you to
make your manifold as large as you like. (shown to right)
RRP
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
GasManifoldAdd-Ons
Features:
• Easy to use and assemble
• Modular
• Come with brass barbs
Part
Number
004123
FREE SHIPPING for retail orders over $200
to capital cities
Page 32 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
CarbonationKegLidwith2MicronDiffusionStone
FREE SHIPPING for retail orders over $200
to capital cities
CheckValves/OneWayGasValve/NonReturnValve
Easiest way to carbonate your beer.
The keg lid with built-in carbonation
stone! Move the lid from keg to keg to
carbonate as needed. This lid allows
fast force carbonation with the
minimum of effort.
The lid comes with 60cm hose and
stone already attached.
Every keg setup should have one. This
handly device will ensure you protect your
regulator against reversal of flow in your
lines. We have two types available. The white ones
(shown in picture to left) come with brass barbs so that they
will suit several different gas lines irrespective of the
outside diameter (OD). These will also push straight into
our gas line splitters.
We also sell an 8mm push in type (seen above in black) so that if you are using 8mm
OD gas line the line then it will push directly into the fitting without the need for any
clamps.
Part Number
RRP
004789 (with brass barbs)
$9.95
005991 (8mm push in type)
$9.95
Features:
• Stainless Steel 0.5 Micron Diffusion Stone
• Keg Lid with Stainless Ball Lock Post
• Silicon keg Lid seal
• Assembled and ready to use
Part Number
00 6479
RRP
$49.95
6mmPolyJoiners/Tees/Elbows
These poly fittings are made from food grade Poly
Ethylene making them an inexpensive way for
you to join or split your gas or beer line.
• Rated to 100psi
• Will fit beer/gas line with 4mm, 5mm, and
6mm ID
• Made from food grade poly ethylene which
will not taint your beer like other plastics.
RangeofSiliconBungs
These silicon bungs do not perish or leach chemicals
or aromas like rubber bungs.
They are made with food grade silicon and can
handle temperatures up to 180C. They also have
excellent chemical resistance to a wide range of acid
and alkaline cleaners and sanitisers.
Available Sizes (small diameter x large diameter):
• 28mm x 34mm (30mm thick)
• 44mm x 53mm (40mm thick)
• 68mm x 82mm (41mm thick)
• 75mm x 91mm (41mm thick)
Part Number
006851 - 28mm x 34mm
006868 - 44mm x 53mm
006875 - 68mm x 82mm
006882 - 75mm x 91mm
Part Number
005120 - Poly Tee
005137 - Poly Joiner
RRP
$1.49
$1.49
StainlessSplicer/StainlessTee
RRP
$5.95
$6.45
$19.95
$19.95
! NEW !
These stainless fittings are machined from 304
stainless. The stainless ‘tee’ piece (right) is made to fit
the 4 – 6mm ID beer line. The stainless splicer (left) is
perfect for attaching 4-6mm ID line to 10-13mm ID
line.
Part Number
007681 – Tee
007698 – Splicer
007704 – Joiner
RRP
$2.95
$2.95
$2.95
Page 33 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Page 34 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegOpeningTools
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
ScrewinKegCap
These stainless steel keg caps are an
alternative closure to a normal keg spear.
The keg cap is made from 304 stainless
and can be removed and fitted by hand.
These are ideal if you are using the keg as
a storage vessel for something other than
beer or if you simply want an easier way to
open and close the keg.
Part Number
D-type & S-type Keg Seal
Photos above from left
to right above:
Part #:004666 – D-type & S-type keg opening tool for
CUB, Fosters, Asahi, Heineken
Part #:004673 – A-type keg opening tool for Tooheys,
Coopers, XXXX type kegs.
Part #:006523 – Spear compression tool for circlip
installation/removal
Part Number
004666
004673
006523
RRP
$24.95
TamperProofKegSeal–BreweriesOnly
RRP
$49.95
$49.95
$299.00
These tamper proof kegs seals are a great way to keep to top
of the keg spear clean in transport as well as providing visual
proof that the keg has not been tampered with.
The tamper proof keg seal must be broken in order to attach
the keg coupler.
We supply keg seals in light grey which can be
written on with felt tip pen or labelled with a
sticker.
NewandReconditionedStainlessSteel50L
Kegs
10 YEARS WARRANTY
We sell second hand 50L kegs for $40 - $80 depending on the
condition and type.
The kegs seals come in two sizes for A-type
spears or S-type and D-type Spears.
Part Number
D-type & S-type Keg Seal
A-type Keg Seal
We also stock brand new kegs sold without the spear and sell the
a-type and d-type screw in spears separately.
All new kegs are made to EURO standard and are made with
stackable chimes. We now also offer 10 years warranty on the
kegs (part 005755). All kegs are serial numbered and made to
Australian Standard (AS2971). Circlip type spears and can be made on request. Keg
Spears come with 12 months warranty.
Part Number
RRP
Second Hand Kegs
NA
005755 -Brand New 50L Keg (no spear)
$110.00
005762 - A-type Spear
$22.00
005779 - D-type Spear
$22.00
Page 35 of 67
Page 36 of 67
RRP
NA
NA
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
SecondHand/UsedBallLockLockKegs
58LitreStainlessKeggle
These brand keggles are made for the avid home brewer. The
keggles are made from solid 304 stainless steel. The 1.5mm thick
stainless is heavy enough to take some beating and also thick
enough to be heated by direct fire (such as the LPG burner part #:
006653). The keggles are 41cm diameter and 59cm high with 33cm
opening at the top.
These kegs are sold as is. They are pressure tested
and may contain some residual syrup. We
recommend that you change the o-rings when you
purchase these. The keg seal kits are Part#004857.
Some of the kegs come with ring pull pressure relief
and some only have the auto pressure relief.
The keggles include the ½” large bore 2 piece ball valve.
These second hand kegs are 21cm Diameter and 64cm high. These
kegs use the ball lock disconnects (Part numbers
004833,004840,005267,005274).
Other options can easily be fitted to the keggle such as:
1. 30cm domed false bottom for Mash Tun conversion.
This will require parts:
Part #: 004598 – 30cm False Bottom
Part #: 005496 – Short piece of silicon tube
Pert #: 005717 – ½ Female x 13mm
barb to fit inside of keggle
2. 3” Bi-Metal Dial Thermometer
Requires part #: 005328
3. 2200 Watt Element for HLT or
electric kettle conversion
Requires part #: 004727
4. Thermowell conversion
This just requires part #: 005311
Part Number
007018
SecondHand19LPinLockKegs
These kegs us pin lock disconnects (Part no: 5366/5373). They are
slightly larger in diameter (22.6cm) and slightly shorter (58cm) than
regular Cornelius type ball lock kegs. The pin lock kegs do not come
with the pressure release valve with ring pull, they come with a relieve
valve which simply pops out at approx. 100 psi. To relief pressure
manually you can push down the poppet on the gas post.
RRP
$189.95
Part Number
004802 – 19L Second Hand Ball Lock
Keg
005502 – Replacement Keg Lid with
PRV & Silicon O-ring
005847 – 19L Used Pin Lock Keg
200LStainlessSteelPot
These enormous 200litre stainless steel pots are
suitable for home brewers or nano-breweries that want
to build their own system.
The pots are made from 1mm thick 304 grade stainless
steel.
The lids come with a silicon seal and secure with 4
clamps that hold the lid down. The pots also are made
with strong welded handles on the sides of the pot.
! NEW !
Due to the size of these pots it possible that the pots
can get slight dings or dents in transit as they are often
handled by forklift. As a result we do not guarantee the
pots to be free of dents unless you pick them up from
our distribution centre in Springvale.
The pots are 60cm diameter and 70cm tall.
Part Number
007735
RRP
$349.00
Page 37 of 67
Page 38 of 67
RRP
$69.95
$19.95
$59.95
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
EconomyNewBallLockKegs
NeopreneKegParka/Jacket
These new kegs are sold in 2 different sizes:
- 9.5 Litre (21cm Diameter x 34cm High)
- 19Litre
Made of durable neoprene, these keg parkas will keep your beer cold for hours
without the need for a bucket of ice. We have two sizes. The larger size will fit
straight over any 19L keg and the smaller size will fit any 9L keg. They
will fit any kegs that are between 20-24cm in diameter.
(21cm Diameter x 62cm High)
Our new black 19L keg parkas are now 3 times thicker for superior
insulating performance.
Part Number
004819 – 19L Keg Brand New
004864 – 9.5L Party Keg Brand New
RRP
$99.00
$99.00
Perfect for parties or picnics, or anytime the keg is out of the fridge as it
will help to maintain a cold temp in your keg for hours. Put a couple ice packs in
between the keg and jacket and it will be even colder.
Part Number
RRP
005946 – Parka for 19L Kegs (Super Thick)
$24.95
005953 – Parka for 9L Kegs (Blue)
$19.95
CorneliusKegSparePartsandDisconnects
(Compatible with new
we sell)
PremiumNew19LBallLockKegs
5YEARWARRANTY
NEW
These premium brand new kegs are rated to 130psi working pressure
and are made using the robotic orbital welding machine. The finish
on these kegs are far superior to our other
economy stainless steel kegs and are made with
super smooth weld making them sanitary and
easier to clean.
The black rubber on these kegs also make them a
little nicer to use around your house as they are
less likely to damage your tile floors or crack
plastic lining inside your kegerator.
The two sizes available are the 9.5L (2.5gallon)
with a stainless handle or the 19L (5 gallon) size
with rubber handles.
Part Number
007322 (9.5L with rubber base+SS handle)
007339 (19L with rubber base and handle)
and second hand kegs that
RRP
$109.95
$119.95
Part Number
004833 – Grey Ball Lock Disconnect Barb
004840 – Black Ball Lock Disconnect Barb
005267- Grey Ball Lock Disconnect MFL Thread
005274 – Black Ball Lock Discnnct MFL Thread
005281 - Nut & Barb-MFL Disconnect
005366 - Grey Pin Lock Disconnect Barb
005373 - Black Pin Lock Disconnect Barb
005977 – Gas Pin Lock Disconnect MFL Thread
005984 - Liquid Pin Lock Disconnect MFL Thread
005212 – Cornelius Type Gas Post
005229 – Cornelius Type Liquid Post
005250 – Silicon Hatch/Lid O-ring
006417 - Cornelius Keg Lid Pressure Relief Valve
006820 – Keg Lid Foot
Part Number
005236 – Post O-ring
005243 – Dip Tube O-ring
004826 - Poppet
Page 39 of 67
Page 40 of 67
RRP
$6.95
$6.95
$6.95
$6.95
$4.95
$9.95
$9.95
$9.95
$9.95
$5.95
$5.95
$4.95
$3.95
$1.49
RRP
$0.29
$0.29
$1.49
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
StainlessSteelBallLockDisconnects
These 304 grade stainless steel ball lock disconnects are
exceptional quality and extremely reliable and robust.
AdjustablePressureReliefValvewith
Gauge
NEW
They are suitable for commercial applications or home brewers.
5 YEAR WARRANTY
Part Number
007773 – Stainless Gas Disconnect Barb
007780 – Stainless Liquid Disconnect Barb
007797- Stainless Gas Disconnect MFL
Thread
007803 – Stainless Liquid Disconnect MFL
Thread
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
RRP
$16.95
$16.95
$16.95
Relieves pressure while filtering from one keg to another or
allows you to accurately naturally condition in the keg by
setting the desired venting pressure. Adjustable up to
100kPa (15psi).
Notes: You need to wind/unwind the end of the valve to
adjust the pressure. The grey ball lock disconnect is sold
separately (part#5267) or you can also use pin lock
disconnect (part#5977).
Part Number
007315
RRP
$29.95
BallLockPostwith1/4inchbulkheadassembly
$16.95
These ball lock post include a 1/4inch BSPP thread so you can attach it to a wide
range of other fittings. The posts include a 20mm long thread, an o-ring, poppet,
locking nut and short dip tube. Longer dip tubes can be purchase separately
(part#6097). This would enable you to make a keg out of any pressure vessel if you
wanted to. The assembly can also be fitted to regulators, gas manifolds and various
other items (as shown in pictures above).
Part Number
RRP
007070 - Liquid
$19.95
007087 - Gas
$19.95
Page 41 of 67
Page 42 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
KegCO2ChargerKit
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
NEW LOW PRICE
MaltMuncherGrainMill(2Rollerand3RollerDesigns)
This keg charger kit is just what you need to charge your keg on
the run. Small enough to fit into your palm making it the first
choice for your portable keg setup. Simply screw on the MFL
threaded disconnect (part 5267 or 5977), attach to your keg, and
press the trigger to charge the keg. The kit includes 1 x 16gram
CO2 cartridge. Replacement CO2 cartridges can also be
purchased.
The MaltMuncher Grain Mill is constructed
using materials that will last a lifetime. Cold
rolled steel for the rollers, 6061 Aluminum
body and hopper and oil impregnated brass
bushings.
Part Number
005908 – Keg Charger Kit + Cartridge
Part Number
005939 – Spare 16gram Cartridge
We now stock these in a 2 roller and 3
roller design. The 3 roller design has the
main advantage that it draws
the grain better and gives
improved throughput.
RRP
$19.95
RRP
$1.95
FEATURES:
* Includes, hopper and crank handle
* Width and roller diameter is optimized for use with
power drill
* Adjustable rollers at both ends to give uniform crush
* 12 TPI knurl to efficiently pull grain through rollers
while leaving hull intact to form an excellent filter bed
for sparging
PremiumRegulatedCO2Charger
Unlike the cheaper charger kits made from plastic
this little charger kit is made from machined
anodised aluminium. The charger kit is very
compact but is just large enough to house a very
small regulator. No need to worry about pressing
the trigger on the charger too much or too little, just
use the regulator to set the pressure and forget.
Simply screw on the MFL threaded disconnect (part
5267 or 5977), attach to your keg, and set the
dispense pressure.
Part Number
005441 (2 Roller)
007421 (3 Roller)
Photo to right: Kit does not include disconnect or
16g cartridge. These have to be purchased
separately
(part# 5939)
Part Number
006844
RRP
$135.00
$199.00
HighTorqueMotor(forMaltmuncher)Kit
RRP
$49.95
NEW
MFLTapShankAdaptor
This motor is made to be
direct drive and will couple
with the mill using the
included spider coupling
with polyurethane cushion.
The motor mounting plate
and spider coupling make
The MFL Shank Adaptor (photo to right)
is what you need to connect your draft
tap directly to your MFL disconnect (will
work with both ball lock and pick lock
disconnects). Suitable for tap models
004079, 005533, and 006332.
These allow you to make a very compact
portable setup as shown in photo to the
left.
Part Number
005731
RRP
$14.95
Page 43 of 67
This 1amp, 240v motor
has been coupled with a
high torque (1:7.5ratio)
gearbox to bring the RPM
down to the perfect milling
speed of 180rpm.
it easy for you to mount the motor and mill together.
The cast alloy motor housing and mounting bracket are robust and quality made.
The housing is sealed and practically maintenance free. The mill motor kit also
includes a kill switch for your safety.
Part Number
RRP
007414
$199.00
Page 44 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
TheKeggomaxCMRefluxStill
The Kegomax Reflux Still is easily one of the best Coolant
Management (CM) reflux stills available today. It’s a
professional grade still that produces exceptional spirit with a
high level of purity (up to 95% ethanol).
FREE SHIPPING for retail orders over $200
to capital cities
TheKegBoiler
These 50L Keg Boilers are made from commercial grade 316
stainless steel. They are ideal for people wanting to take
advantage of the efficiencies related to distilling on a large
scale.
NOW ALSO FITS OUR
Features:
• Achieve 95% Alcohol
TURBO BOILER TOO
• Fully stainless steel design
• Able to be use with large 50L Keg Boiler
• Huge reflux column means high purity spirit
• Superior design and exceptional performance
• Copper packing to release sulphides
•
Includes:
• Now also includes all mounting hardware to fit the still to
a 50L Keg boiler or our 35L turbo boiler
• Thermometer
• Stainless steel and copper packing
Digital thermometer with bung
Part Number
004680 Reflux
still
RRP
$299.00
TheKeggomaxFMRefluxStill
(PatentPending)
The Kegomax FM Reflux Still is an all new reflux still design that
is made from borosilicate laboratory grade glass, stainless steel
and copper. The still is able to produce extremely high grade
neutral ethanol and is extremely easy to operate. It can also be
automated using one of our pre-wired temp controller boxes
(part#004239 or part#004246). The reflux still has been designed
so that it can be used with the boiler below.
If you choose to make your own boiler the still can be easily
attached to a 50L keg using the tri-clover clamp (part#006493)
and the keg fitted with an element (part#004727).
The reflux still includes:
• Digital thermometer
• Copper Condenser
• Stainless universal coupling to connect to Turbo Boiler or
the top of a commercial 50L keg.
• 13mm Barbs to attach regular garden hose to the copper
condenser.
Part Number
RRP
005069
$219.95
Page 45 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
The Keg Boilers are made from second hand 50L kegs. The
keg vary in type shape and condition.
Features:
• Commercial grade 316 stainless steel
• 50L Capacity
Includes:
• 2200 watt element
• Power cord
Part Number
004710
RRP
$329.00
TurboBoiler-2000watt
The turbo boiler is a great way to boil your wash for distillation
and can also be used for boiling water or wort for beer
making. The boiler comes standard with a 47mm hole to suit
the “Still Spirits” stills (such as the T500) and to suit our
Keggomax FM reflux still. We also can provide separately
lids with no hole, or lids with 60mm hole to suit the Pure
Distilling stills.
Features
• Concealed element for easy cleaning
• Boil dry protection
• Large 25L capacity
• Made from stainless steel
• Handy Tap
• Solid Lid with Silicon Seal
Part Number
005113
RRP
$199.95
Page 46 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
2200WattStainlessSteelHeatingElement
StainlessSteelMale/FemaleQuickDisconnects
These heating elements are powerful and perfect to make use on your boiler. The
element is made from 304 grade stainless steel. This element also has a weld free
design meaning that you can easily install it by simply drilling a hole in your
pot/keg/boiler of approximately 32mm and tightening a nut from the outside of the
pot. The diameter of the element at the widest point is 38mm so it is ideal if you
need to pass the element through the neck of a keg to
make a keg boiler.
These male quick disconnect couple with the stainless female
quick disconnects below. They come in three different types
from left to right.
Left: 1/2” BSP Male Thread (005625)
Middle: 13mm Barb (005632)
Right: 8mm Barb (005649)
Female quick
disconnects come
in three different types from left to right:
Left: 13mm Barb (005588)
Middle: ½” BSP Male Thread (005601)
Right: ½ BSP Female Thread (005595)
This element also works extremely well with our heat
sticks (part number #006226) if you are planning on
making a RIMS recirculating system.
NEW LOW PRICE
Features:
• Powerful 2200 Watt
• thread:32mm (M32 – Metric 32mm), flange:40mm,
length element only:290mm, diameter: 25mm
• Food grade silicone seal
The element also come with a food grade high temperature
silicone seal and a power cord is sold separately.
Part Number
004727 Element
004734 Power
Cord
StainlessSteelBarbedFittings
Stainless steel barbs
Left: ½” BSP Female x 13mm Barb (005717)
Right: ½”BSP Male x 13mm Barb (005700)
RRP
$44.95
$7.95
RIMSHeatStickHeatExchangerHousing
This heat stick housings make is very easy to build a RIMS
recirculating mash system. They have been made with TIG welded
50mm stainless pipe with 2 x ½” BSP female sockets at right angles in
the top and bottom for the wort to flow in and out. On one end there is
a tri-clover end cap with a 32m hole pre-drilled so it is ready to mount
one of our 2200watt elements (part #004727). The top of the heat
stick has a 20mm hole so it is ready to mount either a thermowell (part
#005311) or bulkhead (part #005335).
This makes it very easy to then use a temp controller (part#004246)
and pump (part#005861) to build your own re-circulating RIMS
system.
Features:
* Solid TIG welded from 304 stainless
* Silicon beaded seal
* Easy to disassemble with tri-clover clamp
Part Number
006226
RRP
$249.95
OtherStainlessParts
From Left To Right:
Stainless Nut ½” BSP (005724)
Stainless Elbow Bend ½” BSP (005670)
Stainless Pipe with Internal ½” BSP Thread - 33mm Long (005663)
Stainless Pipe with External ½” BSP Thread - 35mm Long (005656)
Stainless Tee with Internal ½” BSP Thread (006233)
Ball Valve ½” BSP Large 14mm Bore (005618)
Part Number
005625
005632
005649
005588
005601
005595
005717
005700
005724
005670
005663
005656
006233
005618
Page 47 of 67
Page 48 of 67
RRP
$5.95
$5.95
$5.95
$9.95
$9.95
$9.95
$4.95
$4.95
$2.95
$4.95
$4.45
$4.95
$4.95
$15.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
SiliconandStainless½”BSPWashers
These washers are compatible with any ½” BSP plumbing
hardware. They come in silicon for sealing things and
stainless.
Silicon: 21mm(ID) x31mm(OD) x 2mm (thickness)
Stainless: 21mm(ID) x33mm(OD) x 3mm (thickness)
Part Number
RRP
005885
$1.95
(Stainless)
005892 (Silicon)
$0.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
StainlessSteelCamlockFittings
Part:007629 - Type D
Female x ½” Female
! NEW !
Part:007636 - Type B
Female x ½” Male
Part:007643 - Type C
Female x 13mm Barb
Part:007650 - Type A
Part: 007667 - Type F
Male x ½” Female
Male x ½” Male
• Stainless Steel
• 150psi/11Bar Operating Pressure
Part Number
007629
007636
007643
007650
007667
007674
Part: 007674 - Type E
Male x 13mm Barb
½”BSPStainlessBallValveAssembly(toportpot/keg)
This ball valve is sold as a complete
assembly (shown in picture on left ) so all
you have to do is drill your 20mm hole in
your keg, pot or vessel wall and you can
fit this ball valve.
This is a full port ball valve with a 14mm
bore which allows maximum flow rate
through the ball valve.
The valve comes with Teflon tape already on
the nipple, a silicon o-ring which is seated in
the ½” BSP nut. The seat in the nut prevents
the o-ring from rolling out of place when
tightening. As shown to top right the 1/2”
BSP Male x 13mm Barb (#005700) can be
fitted to the ball valve (purchased separately)
so you can attach any 11-14mm ID type hose
(such as our silicon hose #005496).
On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm
meaning you can attach an elbow (purchase separately #5670) to the inside of the
vessel so it draws from the bottom (as shown to the right).
YouTube Link on Installing this product: http://youtu.be/-5-_v_z-dfg
YouTube Link regarding making a ball valve assembly: http://youtu.be/_Uqs9jw61VY
Part Number
RRP
005748
$24.95
Page 49 of 67
Page 50 of 67
RRP
$7.45
$7.45
$7.45
$5.45
$5.45
$5.45
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
12inch/30cmStainlessHopBazookaScreen
PortableRefractometerwithATC
This refractometer is used to measure the density
of your beer or wine. Many brewers prefer to use
this instead of a hydrometer because they find it
quicker and easier to get an accurate reading.
This model comes with ATC (Automatic
Temperature Compensation)
Wine: Measure the brix level (sugar level) in your
grapes with just one drop! The perfect vineyard
tool for monitoring ripening grapes. Use them after
the crush to get an exact brix reading.
Features:
• 0-30 brix scale
• 0-1.120 specific gravity scale
• Metal body with rubberised grip
• Adjustable focus eyepiece with rubber grip
• ATC (Automatic Temperature Compensation) Allowing you to use the
refractometer between 10 – 30 degrees Celsius so the temperature of the
sample is irrelevant.
NOTE: This tool is used to measure unfermented wort. Once alcohol is present in
the wort, the use of a correction table is advised.
Part Number
RRP
004222
$44.95
These 304 Grade Stainless Steel 16
Mesh filter screens are ideal as a filter in
your mash tun or brewing kettle. The
30cm length is long enough to fit it your
keg, keggle (Part#7018), or pot.
The 1/2inch BSPT thread fits with the
large range of other accessories that we
sell.
Part Number
007438
NEW
RRP
$8.95
SiliconHose/Tubing
This silicon hose is resistant to constant high
temperatures and has excellent chemical resistance.
The soft silicon is great for transferring beer from
fermenter to keg and will fit onto the standard fermenter
tap or standard 13mm hose barbs. The soft silicon easy
to work with and seals very well. It is also recommended
for handling spirits and for distillation applications as it
does not leach plasticisers like vinyl tubing.
Internal diameter is 11.5mm and outside diameter of 18mm. Please note that this
hose should not be used for higher pressures above 20psi (such as mains water
pressure). The hose has a burst pressure of approximately 35psi.
Part Number
RRP
005496 (per meter)
$4.95
25mmScrewTypeHoseClamp
This screw type hose claps are often used in laboratory equipment to
shut off or control the flow of liquid through flexible hose. For beer
brewing they are fantastic for adjusting the flow of wort in your
mashing system or fly sparging. The 25mm size is suitable to use with
the silicon hose (#5496). No need to cut your hose or feed the hose
through the clamp. The gate on one side of the clamp swings opens
and you can place the clamp over any part of the hose. Part Number
RRP
006622 (25mm)
$5.95
Page 51 of 67
Page 52 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
HandMadeHardwoodMashPaddle
MKII-HighTemperatureMagneticDrive
PolysulfonePump
This is an Australian made product made from Australian hardwood. These mash
paddles are beautifully hand made in Melbourne and will ensure you never get dough
balls in your mash again. The perfect gift for any mash brewer or yourself.
Part Number
005830
RRP
$69.95
StainlessSteelMashPaddle
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
NEW MODEL
Voltage: 220-240 at 50-60hz
Max Head: 3.4m
Max Flow: 19L/min
Wiring: Now includes Australian power
socket
Fittings: ½”BSP
This pump is constructed of food-grade
materials, handles boiling wort. The impeller
housing is made from polysulfone because it
is a tough, food-grade plastic rated up to
120C.
The magnetic drive acts as a clutch allowing the user to put backpressure on
the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must
put the pump under the level of the liquid source. This is an extremely efficient
1.1amp pump which can be run continuously at elevated temperatures.
The magnetic drive ensures no lubricated bearings are in contact with the
liquid at all, so you can be sure there is no chance of any contamination of the liquid
being pumped, which is why this pump is ideal for home brewing.
Part Number
RRP
006806 (1/2” BSP)
$69.95
HighTemperatureMicro12vDirectDriveBrownPump
These stainless steel mash paddles are tig welded together from 304 stainless. They
are very robust and suitable for stirring large mash batches. The paddle will ensure
you never get dough balls in your mash again. The perfect gift for any mash brewer
or yourself.
The paddle is 73cm in length with a paddle head with dimensions of 26cm x 14cm.
Part Number
006691
RRP
$49.95
Voltage: 9-14V (higher performance at higher voltage)
Max Head: 3.2 meters (at 12v)
Max Flow: 7.2L/min (at 12v)
Wiring: Not wired
Threads: Threads are standard ½” BSP
These economical little pump is made from food grade
fibre reinforced plastic and is rated up to 105C. It very
compact in size measuring 92mm x 64mm x 45mm.
The 12v power requirement means that they are safe to wire yourself. They only
draw 0.65amps and have high flow rate for such a small pump. A good option for
small brewers looking for an inexpensive way to build a recirculating system. The
axle is also lubricant free so there is virtually no maintenance or lubricant to get into
your beer.
Part Number
RRP
006356
$23.95
Page 53 of 67
Page 54 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
WortAerator-AirPumpOnly
BorosilicateErlenmeyerFlasks
This aeration pump is designed to work with the 2 micron
sintered stainless stone. The output side of the pump fits
our 4mm ID beer line. Lack of aeration is often the
reason for sluggish fermentation or poor attenuation.
The best brewers make large yeast starters to get their
beer fermenting fast. Large populations of active yeast help
ensure flavorful beer free of off flavors.
Good aeration can be achieved using this pump and will
greatly increase the health of your yeast especially in
their aerobic stage. Simply plug pump into your wall and
put the stainless air stone into your fermenter for 15 min. To clean and sterilise the
air stone simply put in boiling water and store in clip lock bag.
Part Number
RRP
005922
$19.95
WortAerator-AirPumpKit
This aeration kit includes the air pump, sintered
stainless stone, and the 0.20 micron autoclavable air
filter. This complete assembly will ensure that you
get the best possible aeration in your wort which will
lead to faster fermentation, better attenuation and
healthier yeast in general. The included 0.20 micron
air filter will also ensure that the air that you put into
your wort is pure and free from any bacteria.
Erlenmeyer flasks are made from borosilicate so you can
move directly from gas stove top to ice bath for cooling
without it cracking. This reduces the risk of contamination
when transferring from one container to another.
NOTE: It is not recommended to use directly on electric
heating element. Only use gas. Warranty on this product does not include breakage
if you break the product.
Part Number
RRP
006158 (1000ml)
$9.95
006370 (3000ml)
$24.95
006165 (5000ml)
$39.95
ReagentBottles&MeasuringCylinders
These Reagent Bottles (left) and Measuring Cylinders (right) are made
from the same laboritory borosilicate as our Erlenmeyer Flasks. These
500ml & 1000ml Regent Bottles are ideal for the boiling and storage of
wort for your starter. Simply place in microwave to sterilise wort then cap
and put in fridge until you need to make your starter. The whole bottle
can be autoclaved. The measuring cylinders have volume of 250ml with
2ml graduations for accurate measurements.
Simply dip the air stone into your fermenter and let it
bubble in your fermenter for 30 minutes.
Part Number
005915
RRP
$59.95
Part Number
006387 (500ml bottle)
RET3918 (1000ml bottle)
006394 (measuring
cylinder)
0.2MicronAirFilter
These 0.2 Micron Air Filters will filter out microbes and
bacteria. They can be used in many different ways.
They can be used with our wort aerator pumps (above)
so you can aerate your wort, or can be used as an
airlock in the top of your fermenter. They can also be
used to filter air going back into a cask when dispensing
real ale.
This filter is not suitable for liquids and should be
discarded if it gets wet.
Part Number
006721
RRP
$4.95
$8.95
$9.95
AutoEasySyphon65cm
RRP
$5.95
These syphons are an easy way to transfer your wort
from one vessel to another. They are easy to use and
come apart for cleaning. Simply pump the handle a
couple time to start the syphon. The syphon includes
about 1 meter of vinyl tube and a sediment reducing
tip.
!NEW!
Part Number
006813 (65cm)
Page 55 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
RRP
$19.95
Page 56 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
PivotingMagneticStirBar&NeodymiumRareEarth
Magnets
These 28mm magnetic stir bars (part #006240) are suited to use with the above
conical flask. If you would like to make your own stir plate you can use use a
small computer fan and the neodymium magnets (part#6257) to make a
magnetic stirrer. Alternatively if you prefer to purchase a professional laboratory
adjustable magnetic stirrir these are available below (part#6714 ). Using a magnetic
stirer is easy and will optimise the growth of your yeast starter in the
conical erlenmeyer flasks.
These button magnets are neodymium with high level of magnetic
flux. They are 8mm diameter and 6mm thick.
Part Number
RRP
006240 (stir bar)
$4.95
006257 (button magnet)
$2.95
AdjustableMagneticStirrerMachine
This adjustable magnetic stirrer is ideally used with the stir
bar above (part#4240). Simply plate your yeast
propigation flask ontop of the stir plate and drop in the stir
bar. Switch on the machine and adjust the spin speed.
Part Number
006714
RRP
$79.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
PhosphoricAcidBlendSanitiser
This sanitiser is completely food grade and non-rinse. The
formulation is highly concentrated and will make over 300Litres
when diluted. You can also re-use the sanitiser over and over
again making it even more cost effective.
The phosphoric acid blend provides a unique killing system,
unafected by organic soils and delivering a low foaming
formulation with optimum coverage and penetration. The
formulation is made to impart no off-odors or flavours. Unlike
other sanitisers it is non-staining, non-corrosive on stainless and
stable over a wide range of teperatures.
This sanitiser comes packaged in a convenient 2 chamber mixer
container so you can easily measure the required amout simply by squeezing the
bottle.
Part Number
RRP
005519 (300ml)
$9.95
006202 (20L Cube)
$199.95
100%PureSodiumPercarbonate(400grams)
Sodium percarbonate is 100% active ingredient so it is pretty powerful
stuff. Sodium percarbonate uses active oxygen to penetrate carbon or
protein soils and has a high kill rate on wide range of micro-organisms
making it an effective sanitiser as well as cleaner.
This is a fantastic product for use on all brewery equpment including
beer lines, pots, fermenters, heat exchangers. It will effectively remove
beer stone & dried up yeast.
Sodium percarbonate it gradually decomposes into not-toxic,
environmentaly safe, food grade elements. It decomposes into oxygen,
sodium carbonate & water.
Part Number
RRP
006172 (400gram Jar)
$6.95
006141 (1kg bag)
$9.95
CausticSoda(SodiumHydroxide)–1kgBag
A cleaner that is fairly dangerious to use but still the first choice for many wineries
and breweries. It’s ability to dissolve and remove a wide range soils, oil, grease and
stains makes it a good choice when other cleaners are not effective. Safe to be used
on stainless but some other soft metals will disolve when using this stuff. Use with
caution. When used in combination with sodium percarbonate(hydrogen peroxide)
the combined cleaning effect is extremly effective.
Part Number
RRP
006288
$4.95
Page 57 of 67
Page 58 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
TungstenCarbideTipped(TCT)HoleSaws(25mmDeep)
These Tungsten Carbide Tipped (TCT) Holesaws are the ideal solution to your
metal cutting needs. Designed for steel
and stainless steel. For drilling stainless
there is simply no alternative to TCT
holesaws. We have 3 different sizes.
They can also drill through wood, plastic,
steel and many other materials. These are
sold as full assembly so no arbour is
needed. The handy spring built into the
holesaw pilot ejects the core after drilling.
NOTE: To extend the life of the holesaw it is important to use cutting lubricant or
WD-40 while drilling. For maximum holesaw life use under 300 RPM when drilling
stainless steel or steel.
Part Number
006110 (20mm diameter)
006127 (22mm diameter)
006134 (32mm diameter)
RRP
$9.95
$9.95
$16.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Icemaster225–IceBank/Glycol/
TempriteCooler
The Icemaster 225 is a commercial grade icebank cooler that is
extremly compact yet offers high performance for small to
medium volume customers. This unit is ideally suited to small
bars, cafés, and restaurants. The unit can also be converted to a
glyc
* Impeller + pump
* 4 stainless product lines ( 4 x 10meters x 8mm OD x 7mm ID)
* Powder coated finish
Specifications
Size:
Ice Bank capacity:
Refrigerant:
Coils:
Weight (full/empty):
Capacity:
Pump:
Power:
Part Number
006219
410mm x 410mm x 685mm
22.5kg (40L coolant tank)
r134a (280g)
4x11meter (8mmIDx7mmOD) 304 Stainless
55kg/15kg
60L in first hr @ 20C
30L/Min (maximum head of 7 meters)
240v, 260 Watts
RRP
$849.00
100StripPHTestKits
FullRangePH0toPH14
&
NarrowRangePH3.8to
PH5.4
No more calibration or spilling buffer solution. The handy
test strips just dip straight into your samble and wait 10
seconds for the colour change. Easy, reliable and fast
indication of PH.
The narrow range test kit is specifically chosen for beer brewing with a ph range
between 3.8 and 5.4 so you can more accurately determin mash ph.
Part Number
006585 – PH0 – PH14
006837 – PH3.8 – PH5.4
Page 59 of 67
RRP
$9.95
$6.95
Page 60 of 67
FREE SHIPPING for retail orders over $200
to capital cities
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
FreedomOne+™SodastreamAdapterHose-36”and72”
This handy hose attachment will allow you to connect one of our 2.6kg or 6kg CO2
cylinders to your sodastream machine. This adapter also includes a handy pressure
guage so you can see how much pressure is left in yor CO2 cylinder.
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
28gHaynesLubri-FilmPlus–FoodGradeLubricant
Haynes Lubri-Film Plus is a heavy duty sanitary lubricant with extended performance,
low friction properties. This lubricant is NSF rated and FDA approved for food
contact.
The lubricant minimises downtime, extends the life of moving parts and will not dry or
gum on equipment. It cleans off equipment easily.
Specifications:
• Odour and taste free, beer safe
• Sanitary
• Non-toxic
• Food grade
• Will not effect beer head retention
With the FreedomOne Adapter you can enjoy a seemingly endless supply of soda
and a fraction of the cost of your regular Soda Stream CO2 refills.
YouTube Link on how to use this product: http://youtu.be/H2luBUeYc4E
Part Number
RRP
RET9637 (36 Inch)
$89.95
RET9446 (72 Inch)
$109.95
Part Number
006905
StainlessButterflyandWireHoseClamps
Butterfly Clamp
Butterfly worm style hose clamps (shown to left) come with a tab on them
making it easy to tighten and loosen the clamp by hand.
We supply the 14-25mm size. Multiple clamps can be attached together
end-to-end if larger diameter is required.
Sparkeltap–ContinuousChilledSparkling/Still
Water
Wire Hose Clamps
In some circumstances wire hose clamps are preferable over worm style hose
clamps as they do not pinch the hose like worm clamps do. There are three
different sizes of wire clamps available:
9-12mm
11-14mm
15-18.5mm
What a fantastic convenience. Chilled sparkling and still water at a
fraction of the cost of bottled water or bottled sparkling water. Enjoy
chilled sparkling water without the hassle of lugging heavy bottles home
from the supermarket. Now anyone can enjoy this simple pleasure at
the pull of a tap.
If you like carbonated water then you will lover the sparkeltap. The
Sparkeltap an undercounter water carbonator and chiller.
Part Number
RET1464 (9-12mm wire clamp)
RET4212 (11-14mm wire clamp)
RET4229 (15-18.5mm wire clamp)
006929 (14-25mm butterfly hose clamp)
The reliable and compact unit will supply endless chilled sparkling
water to your office, restaurant, home or bar.
Download the Sparkeltap Info Sheet by Clicking Here
Specifications:
• Includes dual tap font with soda line and chilled water line,
undercounter chiller and carbonation unit, gas line, 1/2”
BSP water splitter and other necessary hoses.
• Chills soda and still water down to 2C
• Can chill and carbonate up to 20L per hour
• Undercounter unit: 24cm Wide x 31cm Deep x 42cm High
Part Number
006899
RRP
$3.95
RRP
$1199.00
Page 61 of 67
Page 62 of 67
RRP
$1.45
$1.45
$1.45
$0.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
FREE SHIPPING for retail orders over $200
to capital cities
UniversalSiliconFaucetTapSpoutPlug
TheULTIMATEGrowler–2Litre
These unique silicon faucet plugs are a
universal size so they suit any tap fauce of
diameters 10mm up to 17mm.
This growler is made from 304grade stainless steel that is
completely impervious to oxygen or sunlight (UV) meaning your
precious amber liquid is in the absolute best storage container
possible.
The plug is an economical solution for
controlling fruit flies, yeast and bacteria
bulidup when the faucet is not in use.
Vacuum Wall Insulated
Unlike other growlers this growler comes with double wall
vacuum insulation to give you insulation like no other growler. So
forget taking the esky, this baby will stay cold for hours.
The silicon compound is resistant to caustic
and acid based cleaners as well as high
Sprung Wire Lid for Best Pressure Holding Capacity
Most screw cap growlers struggle to hold the pressure required to
keep beer fresh and carbonated. The ULTIMATE Growler comes
with spring wire lid capable of holding up to 40psi.
temperature so it is dishwasher safe.
Features:
• Food grade silicon
• Fits all Keg King taps, pluto guns, fermenter taps, and
many other tap designs
Part Number
006912
Part Number
006936
Drafto is a freaking awesome addition
to your existing Ultimate Growler.
Faucet/TapSpoutBrushCap
Part Number
007711
NEW
RRP
$3.45
Page 63 of 67
NOW
AVAILABLE
COMING
SOON
If you really love your beer you will
dispence it using the Drafto Kit. No
more growlers going flat. This Drafto kit
keeps your beer fresh for months just
like it’s poured straight from the keg.
Keep your tap clean for better tasting beer. It’s easy to
use and will prevent protein and mineral deposits from
building up in your tap.
The bruch can also push right up into the faucet and be
used as a plug to prevent fruit flies getting into the tap
spout.
NEW!
RRP
$29.95
GrowlerDraftoKit
RRP
$2.45
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Simple remove the cap from your
Ultimate growler and replace with the
Drafto Kit and dispence fresh beer
every time.
NOTE: CO2 charger and cartridge not
included. We recommend use of this
product with the part #006844
Part Number
007469
Page 64 of 67
RRP
$19.95
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Alcometers&Hydrometers
The alcometers can acurately measure alcohol water mixture from 0% up to 100%
The hydrometers are made with a 3 scales and have a specific gravity range from
0.80-1.115
RRP
$7.95
$7.95
CIPSpinningSprayBall(POM/Acetyl)
Part Number
007056
A CIP (clean in place) spray ball for cleaning and
sanitising can make cleaning your brewery as easy
as turning on a switch. Simply recirculate your
sanitiser or cleaner using a pump an this sprayer will
coat the inside of your tank in a 360 degree pattern
so all surfaces are wetted. It is made with a ½” BSP
thread so it will fit to a wide range of our stainless
fittings. In order to get to the optimum pressures to
spin the head a descent garden style pump should
be used.
Typically this ball will work best with flow and
pressure of 15-20L/min flow rate at about 200kPa
(30psi).
RRP
$49.95
This three vessel brewery kit comes with:
3 x 7018 – 58L Keggles
1 x 4727 – 2200 Watt Element
1 x 6707 - 14m Immersion Chiller
1 x 5328 - Bi-Metal Weldless Thermometer
1 x 6806 - Magnetic Driver Pump
1 x 4246 – Temp Controller
3 x 5496 – Silicon Tube
1 x 5311 – Stainless Thermowell
1 x 4659 – High Pressure LPG Reg
1 x 6653 – High Pressure 3 Leg Burner
6 x 5588 – Female Quick Disconnect
7 x 5625 – Male Quick Disconnect
2 x 5663 – Pipe Nipple
1 x 4598 – 30cm Falce Bottom
1 x 5670 – Elbow Bend
1 x 5748 – Ball Valve Assembly
1 x 5717 – Stainless Barb
Normal Cost = $1360.35
Cost purchased unassembled $1099.00
Cost including assembly $1299.00
Assembly
If you choose to assembl this yourself you will need a 20mm hole saw, file, spanner
and some feflon tape. If you assembly yourself the price is $200 cheaper but you will
have to drill the holes yourself.
You will also need:
Your own BBQ gas cylinder
A stainless bench (this was $150 from bunnings as shown in photo)
Some screws to mount the pump and temp controller to the bench
Some plumbing fittings to connect garden hose to the wort chiller (available at
Bunnings)
Brief Introduction
This system is designed with 3 x 58L keggles so you can brew a batch of beer that is
up to 50L in size. The 3 keggles are:
1. HLT (hot liquor tank) - Includes 2200 watt heating element which is controlled
using the 16amp temp controller. Includes ball valve and thermowell .
2. Mash Tun - with 30cm false bottom, ball valve and 3” temperature dial.
3. Kettle – Includes stainless ball valve
Step 1 – Preheat HLT
Preheat water in HLT (approximately 75-80C).
Step 2 – Mash
Use water from mash tun to begin mash. Stir mash thoroughly.
Page 65 of 67
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
3VesselRecirculatingHERMSBreweryKit
These alcometers and hydrometers are calibrated at 20C. The glass
alcometer/hydrometer comes in a cylinderical transparent tube that you can use to
take samples and float the alcometer/hydrometer in.
Part Number
RET0580 – Alcometer (0-100%)
RET0597 – Hydrometer (3 Scale)
FREE SHIPPING for retail orders over $200
to capital cities
Page 66 of 67
FREE SHIPPING for retail orders over $200
to capital cities
Keg King
www.kegking.com.au
The Keg Dispense Specialists
2/33-35 Smith Rd
Springvale, VIC, 3171
Phone: +61 3 9011 1698 Fax: +61 3 9011 1697
Step 3 – Recirculate Mash/Step Mash
Use the pump to recirculate the wort through the 14 immersion chiller (which you can
sit in the HLT. Ensure the HLT is at least 50% full so there is enough hot water to
use as a heat exchanger. The recirculation process will enable you to heat up the
mash tun or maintain temperature. The recirculation process will also help to clear
your wort.
Step 4 – Sparge
Use the pump to pump hot water from HLT to the Mash Tun. While the hot water is
entering the mash tun also open ball valve on the mash tun so that the flow out of the
mash tun is appoximately the same as the flow into the mash tun.
Step 5 – Boil
After you have collected the desired amount of wort into your kettle fire up the burner,
add hops and other additions.
Step 6 – Chill
Place the immersion chiller into the kettle in the last 10 minutes of the boil to sterilise
the chiller. Attach garden hose to chiller and start flow of cold tap water. Stir the
kettle to accellerate the cooling process.
Part Number
RET9347 (Unassembled)
RET9330 (Assembled)
RRP
$1099.00
$1299.00
Page 67 of 67