Leave-In-Conditioner Leave In Conditioner: Sprayable thin formulation Styling

Formulation Information
Styling
Leave-In-Conditioner
Leave In Conditioner: Sprayable thin
formulation
Formulation 01525
ATTRIBUTES
Sprayable thin formulation
DOW CORNING® PRODUCTS
DOW CORNING® CE-7080 SMART
STYLE
XIAMETER® PRODUCTS
XIAMETER® OFX-0193 FLUID
Ingredient
Wt. %
Trade Name/Supplier
Phase A
1.
Deionized Water
2.
Polysorbate 20
q.s.
1
Tween 20 / Croda
3.
Glycerin
1
No Tradename Specified / No
Supplier Specified
4.
Panthenol
5.
Propylene Glycol
6.
Silicone Quaternium-16
Glycidoxy Dimethicone
Crosspolymer and Undeceth-11
and Undeceth-5
7.
PEG-12 Dimethicone
2
8.
Phenoxyethanol and
Methylisothiazolinone
0.5
0.5
D-Panthenol USP / BASF
Corporation
2
8.2
DOW CORNING® CE-7080
SMART STYLE
XIAMETER® OFX-0193
FLUID
Procedure
1. Mix ingredients of phase A together until homogeneous.
Variations
193C FLUID can be replaced with SH 3771 M
CE-7080 SMART STYLE can be replaced with 5-7113 SILICONE QUAT
MICROEMULSION
Stability
Stability data for this formulation has not been established.
External Reference Material
A screening formulation used for testing. The variations refer to using 5-7113
as a benchmark for performance and replacing it with other materials such as
CE-7080. The formulation is set up so varying percent active levels can be
tested to determine performance at each use level. 2% active is used as a
benchmark and when 5-7113 is used it should be in formulation at 6.7% to
obtain 2%active level. Lylenette E Canfield CPF Owner Administrator 989-4968745 [email protected]
This suggested formulation is only a representative formulation and it is not a commercialized
product. Dow Corning believes that the information and data on which this formulation is
based are reliable, but it has not been subjected to extensive testing for performance, efficacy
or safety. BEFORE COMMERCIALIZATION, YOU SHOULD THOROUGHLY TEST THE
FORMULATION OR ANY VARIATION OF IT TO DETERMINE ITS PERFORMANCE,
EFFICACY AND SAFETY. IT IS YOUR RESPONSIBILITY TO OBTAIN ANY NECESSARY
GOVERNMENT CLEARANCE, LICENSE OR REGISTRATION. In addition, Dow Corning has
not undertaken a comprehensive patent search on the formulation. Suggestions of uses
should not be taken as inducements to infringe any particular patent.
SAFE HANDLING INFORMATION
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND
CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.
FOR THE MATERIAL SAFETY DATA SHEET PLEASE SEE OUR WEB SITE,
DOWCORNING.COM, OR CONSULT YOUR LOCAL DOW CORNING REPRESENTATIVE.
Dow Corning is a registered trademark of Dow Corning Corporation.
XIAMETER is a registered trademark of Dow Corning Corporation.
© 2010 Dow Corning Corporation. All rights reserved.
Print Date: 3/27/2012
Last Updated: 8/29/2011 9:16:58 PM