Click to find your nearest source of Genuine MTD Parts
POPULAR REPLACEMENT PARTS
AND ACCESSORIES
LAWN & GARDEN
Catalogue includes:
•Fast Moving Parts
•Table of Contents < Click To View
•Accessories and Attachments
Click to find your nearest source of Genuine MTD Parts
Page 2
Table of Contents
Description
Pages
Blades - Lawnmower and Tractor, Mulch Kits
3, 4
Blade Adapters - Lawnmower and Tractor, Transaxle
5,6
Spindles - Lawn Tractor
7, 8
Deck Parts, Engine Pulleys - Lawn Tractor
9, 10
Steering Components, Electrical - Tractor
11, 12
Miscellaneous Parts - Tractor
13
Idler Pulleys
14
Wheels, Pinions - Lawnmower and Tractor Deck
15, 16
Springs
17
Bearings and Spacers
18
Bearings and Bushings
19, 20
Belts - Most Popular
21
Cables - Throttle, ERS, and Choke
22
Lawnmower Parts
23, 24
Shoulder Bolts, Cotter Pins, and Wing Nuts
25, 26
Trimmer Parts, Accessories and Attachments
27 - 32
Lawnmower & Tractor Attachments and Accessories
33 - 35
Lubricants
36
Chore Performer Parts and Accessories
37
Belt Information Charts
39 - 51
Bushing / Bearing Information Charts
52, 53
Blade Information Charts
54 - 68
Paint Code Information
69
Index - Numerical
70 - 72
Index - Alphabetical
73
Note: some items are depicted in this catalogue as pairs to illustrate different views. All items are sold as single units unless otherwise
noted in the description.
Images are not shown to scale.
Product appearance is subject to change without notice.
Click to find your nearest source of Genuine MTD Parts
Lawnmower and Tractor Blades
Lawnmower Blade 3-in-1 Mulching/Side Discharge/
Bagging:
742-0740
742-0741
742-0742A-0637
Application
Used on 20” deck
Used on 21” deck
Used on 22” deck
Lawnmower Blade 3-in-1 Mulching/Side Discharge/
Bagging:
742-0720-0637
742-0721-0637
742-0722
Application
Used on 20” deck
Used on 21” deck
Used on 22” deck
Standard Blade 3 small holes (Lawn/Rider/Tractor)
742-0298
742-0120B-0637
742-0125B-0637
742-0295
Application
Used on 20” deck
Used on 34” deck, 2 required
Used on 22” deck
Used on 44” side discharge 3 bladed deck 2
Required, use with 1 of 742-0252
Tractor Blade High Lift 3 small holes
742-0487A
742-0486A
742-0473A-0637
742-0499A
742-0504A
742-0508A
742-0496
Application
Used on 32” cutting deck and 46”, 2 required
Used on 46” cutting deck, 1 required
Used on 38” deep deck, 86 thru 96, 2 required
Used on 42” deep deck, 90 thru 96, 2 required
Used on 38” deck, 2 required X-tra high lift
Used on 42” deck, 2 required X-tra high lift
Used on 36” cutting deck, 2 required
Page 3
Lawnmower Blade High Lift
742-0640
742-0641
742-0642A
Application
Used on 20” deck
Used on 21” deck
Used on 22” deck
Lawnmower Blade High Lift:
742-0620
742-0621
742-0622
Application
Used on 20” deck
Used on 21” deck
Used on 22” deck
Tractor Blade Standard
742-0256A
742-0122B
742-0215
Application
Used on 30” side discharge decks, 1990 and
after.
Used on most 38” shallow decks.
Used on 44” side discharge, RH, 1 required
Tractor Sand Blade - Heavy gauge for hostile cutting
environments (sandy soil)
742-0497
742-0498
942-0503
Application
Used on 46” cutting deck, 1 required
Used on 46” cutting deck, 2 required
Used on 42” cutting deck, 2 required
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawnmower and Tractor Blades
Tractor Blade 3-in-1 Mulching / Discharge / Bagging
Application
742-0610A
Used on 38” deep deck 97 and after , 2 required
742-0616A-0637 Used on 42” deep deck, 97 and after, 2 required
742-0611A
Used on 46” deck, 97 and after, 2 required
742-0612(942-0612A) Used on 46” deck, 97 and after, 1 required
Tractor Blade High Lift (1997 and newer)
Application
742-0654
Used on 38”deck, 2 required
742-0656
Used on 42” deck, 2 required
742-0644-0637
Used on 46” deck, 2 required
742-0645-0637
Used on 46” deck, 1 required
(High Lift blades can improve Bagging and Discharge performance in
non-mulching applications)
Centre Blade
44” Tractor Deck
742-0252 Length 6.5”
Used on 44” side discharge deck
and 40” Rear Discharge
deck.
190-116 Mulch Kit
38” & 42” Deck
Fits all MTD 38” and 42” side
discharge deep decks. Includes
molded plug, metal deck strips,
mounting hardware and
instructions.
Page 4
Tractor Blade High Lift (1993-1996)
Application
Used on 46” deck, 93 to 96, 2 required
Used on 46” deck , 93 to 96, 2 required
742-0542
742-0543
(High Lift blades can improve Bagging and Discharge performance in
non-mulching applications)
Flail Blade Tractor Deck
Length
742-0266
6.5”
(Four used per 30” Deck)
742-0277 LH,44” deck 2 required
Used on Rear discharge deck
742-0278 RH, Used on 44” Timed
Decks. 2 required for rear
discharge, 4 required for side
discharge
NEW!
tractor
BB-100 Blade
Removal Tool
For safe, easy removal
of both lawn mower and
blades.
OEM-096 Mulch Kit-38” Deck
Fits MTD 38” side discharge deep deck, 1996 & prior.
Includes 4 blades (two O.E. # 742-0537 and two O.E.
#742-0539), baffle and hardware.
OEM-097 Mulch Kit-42”
Deck
Fits MTD 42” side discharge
deep deck, 1996 & prior.
Includes 4 blades (two O.E. #
742-0538 and two O.E. #
742-0539), baffle and
hardware.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawnmower and Tractor Blade Adapters
P748-0189 Blade Adapter
(individual blister pack)
Package includes blade adapter and
mounting hardware
5/32” Keyway
Page 5
748-0235 Blade Adapter - Lawn Tractor
Splined interior diameter
(sold in single units)
NEW LOWER
PRICE FOR
2004 !
748-0300 Blade Adapter - Lawn Tractor
748-0376C Blade Adapter
Splined interior diameter
Keyed shaft. Fits Lawnmowers with
patented four point star hub blade.
Available as kit - see below 753-0588
(sold in single units)
(sold in single units)
NEW LOWER
PRICE FOR
2004 !
748-0323 Blade Adapter
748-0367 Blade Adapter
Keyed shaft
Keyed Shaft
(sold in single units)
(sold in single units)
748-0377C Blade Adapter
Keyed Shaft. Fits Lawnmowers with
patented four point star hub
blade.
753-0588 Blade Adapter Kit
Includes 748-0376C Adapter,
736-0524A Blade Retainer, and
710-1044 Hex Bolt.
Fits Lawnmowers with patented four
point star hub blade.
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawnmower and Tractor Blade Adapters - Transaxle
748-0411 Blade Adapter
736-0524A Blade Retainer
Keyed shaft. Fits Lawnmowers with
patented four point star hub
blade.
Fits Lawnmowers with four point star
hub blade.
Page 6
(sold in single units)
(sold in single units)
Blade Adapters - MTD Original Equipment
PART#
748-0235
748-0300
748-0323
748-0367
748-0376C
748-0377C
748-0411
753-0588
P748-0189
CENTER TO
CENTER
THRU OUTSIDE
HOLE HOLE/PIN MOUNTING
KEY
BOSS
NOTES
MOUNTING HEIGHT ID DEPTH (KEYWAY) DIA. DIAMETER
SPLINED 48
.88"
.733" .88"
48 TOOTH NONE .316" HOLES
NONE
TOOTH
SPLINE
(2)
SPLINED 48
.88"
.977" .88"
48 TOOTH NONE .318" HOLES
NONE
TOOTH
SPLINE
(2)
3 BOLT, LARGE 1.34" .876" .76"
.184" KEY .385" .383" HOLES .821" BOSS
CENTER BOSS
(2)
3 BOLT, LARGE 2.27" .876" .76"
.184" KEY .385" .385" HOLES .821" BOSS
CENTER BOSS
(2)
4 POINT STAR, 1.38" .876" .76"
.184" KEY .385" .289" PINS 4 PT. STAR
SINGLE BOLT
(2)
4 POINT STAR, 2.28" .876" .76"
.184" KEY .385" .289" PINS 4 PT. STAR
SINGLE BOLT
(2)
4 POINT STAR, 2.28" .876" .76"
.184" KEY .385" .265" HOLES 4 PT. STAR
3 BOLT
(2)
4 POINT STAR, 1.38" .876" .76"
.184" KEY .385" .289" PINS 4 PT. STAR
KIT CONTAINS 748-0376C ADAPTER,
SINGLE BOLT
(2)
736-0524A RETAINER, 710-1044 BOLT.
3 BOLT STAN1.12" .876" .73" .156" KEY- .410" .315" HOLES
NONE
DARD
WAY
(2)
CENTER DISTANCE OF OUTSIDE HOLES/PINS IS .250" FOR ALL BLADE ADAPTERS LISTED ABOVE.
618-0163D Differential Assembly
Fits 600 Series Lawn tractors 1992-2002
Replaces 618-0073, and 618-0163B
717-0678 Brake Puck
Fits most MTD models with Transmatic
drive. (sold in single units)
741-0340 Sleeve Bearing
.75” I.D.
1.0” O.D.
1.0” L
Oil impregnated sleeve bearing.
Axle bearing on most MTD single speed transaxle
assemblies. (sold in single units).
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawn and Garden Tractor Spindles
Page 7
717-0906A Blade Spindle Assembly
712-0417A Flange Nut
Uses splined blade adapter 748-0300
For 38” and 42” Decks
5/8 -18 Flange Nut.
Blade and Pulley mounting nut
for most current spindles
(sold in single units)
717-0900A Blade Spindle Assy.
For 32” & 36” Decks
Uses splined blade adapter 748-0300
NEW LOWER
PRICES FOR
2004 !
712-0318 Nut
Jam nut 5/8 - 18 Grade 2
Secures Deck pulley to Blade Spindle most older applications.
738-0707A Spindle Shaft
618-0431 Blade Spindle Assembly
Keyed shaft
Used in 717-0906A, and 717-0900A
Spindle Assemblies
Patented Six-Point star hub.
Includes Double-stacked Pulley
(See Blade Spindle Chart page 8 for
component parts)
618-0116 Blade Spindle
Assembly
618-0142A Blade Spindle Assembly
6-point star hub - includes pulley
6-point star hub - includes pulley and brake disc.
(See Blade Spindle Chart page 8 for component
parts)
(See Blade Spindle Chart page 8
for component parts)
(sold in single units)
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
618-0240A Blade Spindle
Assembly
618-0138A Blade Spindle
Assembly
6-point star hub
6-point star hub - includes pulley and
brake disc.
(See Blade Spindle Chart page 8 for
component parts)
(See Blade Spindle Chart page 8 for
component parts)
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawn and Garden Tractor Spindle Components
741-0919 Roller Bearing
Page 8
741-0155 Roller Bearing
Sealed Precision bearing used on
MTD rider deck spindles. Also used
in large frame Snowthrower
application
O.D.
I.D.
Width
1.850” .787”
.549”
Used with 05034A bearing housing.
Chain case, Edger, and other
applications.
O.D.
I.D.
Width
1.375” .625”
.435”
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
13703 Bearing Dust Shield
05034A Closed Bearing Housing
Used on 717-0906A, and 717-0900A
and other spindle assemblies
1.374” I.D.
Used with 741-0155 and 741-0133
Roller Bearings on chain case and 6.5”
spindle assemblies.
(sold in single units)
750-0456 Spacer
.792” I.D. 1.0” O.D. 1.0” L
Used In many blade spindles and
wheel assemblies.
(sold in single units)
08253B Closed Bearing Housing
15296A Open Bearing Housing
1.85” I.D.
Used with 741-0919 Roller Bearing on
many spindle applications. (Available
with 741-0919 Bearing order part
number S741-0163A)
1.85” I.D.
Used with 741-0919 Bearing on many
spindle applications. (Available with
741-0919 bearing order part number
15297A)
Blade Spindle Assemblies (Quills) components - MTD Original Equipment
SPINDLE
BEARING DUST SPINDLE
BRAKE
SHAFT BEARINGS SPACER SHIELD
NUTS
PULLEY
DISC
APPLICATION
738-0889 741-0919 750-0952 17983 712-0417A 756-0969 5.0" OD.
NONE
46" DECKS 1993 TO 1996
(2 REQ.)
(2 REQ.)
618-0138A 738-0933 741-0919 750-1000 NONE 712-0417A 756-1187 5.0" OD. 783-0342A 38" BOX FRAME LAWN TRACTORS 1997
(2 REQ.)
(2 REQ.)
(2 REQ.)
TO CURRENT
PART#
618-0116
618-0142A
738-0933
741-0919
(2 REQ.)
750-1000
(2 REQ.)
NONE
712-0417A
(2 REQ.)
756-1188 5.75"
OD.
783-0342A 42" BOX FRAME LAWN TRACTORS 1997
TO CURRENT
618-0240A
738-0927
741-0919
(2 REQ.)
750-0952
NONE
712-0417A 756-1187 5.0" OD.
(2 REQ.)
NONE
46" DECKS 1997 TO CURRENT
618-0431
738-0926
741-0919
(2 REQ.)
750-0952
NONE
712-0417A 756-0603 5.0" OD.
(2 REQ.)
DOUBLE PULLEY
NONE
46" FAST ATTACH. DECKS, 2002 TO
CURRENT, WITH ELEC. PTO.
717-0900A 738-0707A
741-0919
(2 REQ.)
NONE
13703
712-0318
(NOT INCL)
NONE
NONE
32" & 36" DECKS 1989 TO 1996
717-0906A 738-0707A
741-0919
(2 REQ.)
750-0456
13703
712-0318
(NOT INCL)
NONE
NONE
38" & 42" DECKS 1990 TO 1996
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawn Tractor Deck Parts and Engine Pulleys
756-04010 Engine Pulley
753-0635 Engine Pulley Kit
Fits 600 Series Box Frame Lawn
Tractors with manual PTO from
1996-2002
Contains 756-0982B Engine Pulley
(1) and
750-0957 Spacer 1”x 1.25” (1)
Replaces part # 756-0488.
Fits Step Thru frame models 1999
to current with manual PTO.
756-0486 Deck Pulley
09322 Brake Disc
5.0” O.D. 0.75” I.D.
48 tooth splined interior diameter, fits
32”, 36”, 38” Deck with splined
spindles.
Used with old-style Blade Spindle
Assembly.
Page 9
761-0168B Blade Spindle
Brake Arm
Fits Box frame Lawn and Garden
Tractors
783-0149B-0637 Belt Guard
For MTD lawn and garden tractor deep deck design. Protects
deck belt from debris.
Fits most 42” decks on MTD Box-Frame 600 series riding mowers
up to 2002.
734-0973 Deck Wheel 5”
734-0974 Deck Wheel 6”
(sold in single units)
OEM-190-183 Deck Wheel Kit
Fits all MTD 38” & 42” lawn tractors.
Anti-scalp wheels are height
adjustable & install in minutes. Kit
contains 2 deck wheels,
brackets, hardware &
instructions.
734-3058B Deck Gauge Wheel Assembly 5”
Includes bushing
(sold in single units)
NEW LOWER
PRICE on
734-0974 !
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Tie Rods, Tiller Parts
Page 10
723-0156 Tie Rod End / Ball Joint
723-0179 Tie Rod End / Ball Joint
(see chart below for thread size
and length)
(see chart below for thread
size and length)
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
723-0448A Tie Rod End /
Ball Joint
723-3018 Tie Rod End /
Ball Joint
(see chart below for thread size
and length)
(see chart below for thread size
and length)
Tie Rod Ends, Ball Joints - MTD Original Equipment
PART#
723-0156
FEMALE
3/8-24 RH X .750" L
MALE
3/8-24 RH X .880" L
RATING
1500 LBS.
723-0179
1/2-20 RH X 1.00" L
1/2-20 RH X 1.12" L
NA
723-0351
723-0448A
3/8-24 LH X .750" L
7/16-20 RH X .700"
3/8-24 RH X .880" L
3/8-24 RH X .620" L
NA
1500 LBS.
723-3018
3/8-24 RH X .750" L
3/8-24 RH X .620" L
1500 LBS.
NOTES
WITH LOCKING PATCH ON MALE THREADS
MTD - Modern Tool and Die
Did you know? MTD is the only company that manufactures and distributes a complete line of Tractors,
Lawn Mowers, Snow Throwers, Chore Performers, and Handheld Power Products in Canada!
Various Tiller Parts - MTD Original Equipment
731-0487 Dust Cap
721-0175 Oil Seal
Used on Tiller Chain case.
Fits 1” Shaft.
Tiller Chain Case tine shaft seal 1.254 O.D. x .125” fits 1” shaft.
(sold in single units)
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Tractor Front End and Steering Parts
683-0055 Steering Arm (Reinforced)
400 and 600 series Box Frame Lawn Tractors.
Original Equipment part includes welded reinforcement for extra
strength and durability.
(sold in single units)
Page 11
753C0606 Front Axle Kit (no longer available in kit
form) Replaces 14608 and 683-0002(A)
Order parts individually: 683-0128A-0637 Pivot Bar, 741-0659
Flange Bearing (4), 731-1291A end cap (2), and 726-0214 push
caps (2)
Fits 400 and 600 series Box Frame Lawn Tractors.
NEW LOWER
PRICE FOR
2004 !
726-0214 Push Cap
5/8” Diameter Push cap.
Used on most 5/8” front wheel axles.
741-0659 Flange Bearing
(sold in single units)
726-0341 Push Cap
Fits 3/4” Diameter axles.
(sold in single units)
741-0225 Hex Flange Bushing
I.D Flange Width (across flats)
.630" 1.120"
.874"
Fits Lawn Tractors with 5/8" front steering axles
steering column bushings etc.
741-0706 Flange Bearing With Grease Fitting
Front wheel bearing and steering axle bearing for 400 and 600
series lawn tractors, 2002to present. Use with 741-0487A.
I.D.
O.D.
Length
.635”
.817”
1.00”
(sold in single
units)
748-0237 Pinion Gear
731-0484A Dust Cover
12 Tooth Steering Pinion for 520 series front
engine rider, 800 series garden tractors, 995
through 999 series garden tractors.
Fits front wheels of most Riding
Mowers
(sold in single units)
(also Snowthrower pinion used with
717-0457B 72 tooth bevel gear)
741-0569 Flange Ball Bearing
600 and 800 Series tractors
equipped with front roller
bearing. 1.380”O.D. 0.625” I.D.
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Electrical Parts, Tractor Transaxle
Page 12
725-1396 Ignition Switch
725-0267 Ignition Switch
Includes 725-0201 key
6 terminal switch for models
equipped with anti-backfire
solenoid, most current models.
Includes 725-0201 key
5 terminal switch for units
without anti-backfire solenoid.
725-1426 Solenoid - Ground through bracket - Spade
Terminal
Fits most models 1990 to
current. Many universal
applications.
725-0771 Solenoid - Ground through bracket Terminal Stud
Fits most models 1989 and
prior. Many universal
applications.
NEW LOWER
PRICE FOR
2004 !
725-0201 Ignition Key - set of two
INDAK key - Fits most MTD ignition
switches. Many universal
applications.
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
725-1745 Deluxe Ignition Key
Delta Key - Fits YardMan Step
Thru frame lawn and garden
tractors. (sold in single units)
NEW LOWER
PRICE FOR
2004 !
725-1657A Interlock Switch
Clutch and PTO safety switch.
Fits most current MTD Lawn and
Garden Tractor. (sold in single
units)
NEW LOWER
PRICE FOR
2004 !
725-1058A Light Socket
Assembly
Tractor Headlight socket assembly Single contact bayonet bulb mount.
725-1341B Deluxe INDAK Key
Fits same ignition switches as 725-0201
Has ergonomic slip resistant comfort grip!
(sold in single units)
725-0893 PTO Switch
Fits most box-frame electric
clutch applications.
(sold in single units)
725-1648 Relay
Bosch/Hella relay 12Volt 20 Amp.
Auto-Drive Lawn Tractor and
Snowthrower applications (4x4).
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Miscellaneous Tractor Parts
Page 13
753C0697 Fuel Line 25ft with 10 Spring Clamps
722-0153 Front Engine Mount
1/4” ID - SAE30R7 rating . 4219G Premium Braided Fuel Line
Box Frame Lawn tractor
isolation mount.
Uses 750-0539 Spacer.
(sold in single units)
750-0539 Spacer
0.315” I.D. 0.50” O.D. 0.52” L
Used with 722-0153 isolation
engine mounts.
(sold in single units)
751-0465A Muffler
723-0383 Retainer Strap - Rear Grass Collector
Fits MTD 400 and 600 series tractors.
5” Diameter can style for 11 & 12 hp L-head engines. 600 Series
Riders. (includes locking tab retainer)
Fits most MTD Lawn &
Garden Tractors with Rear
Grass catchers. Affixes grass
catcher tube to discharge
boot, and boot to tractor
deck.
Uses 721-0208
Exhaust Gasket
Mounts with two
738-0636 bolts
(ordered separately)
(sold in single units)
727-0425A Spring Clip
711-1044 Pin - Belt Guide
Rider Hub Cap mounting clip.
5/16” x 4.75” Pin
5/16 - 18 x .5” Thread
Various Belt Guide applications.
(sold in single units)
(sold in single units)
751-3111 Fuel Cap - Tractor
Fits many Lawn and Garden Tractor
applications. MTD Box Frame and
Autodrive Step Thru models.
Fits 2” threaded tank opening
720-0232 Shifter Knob
1.60” O.D. 1.64” High
3/8 - 16 thread.
Fits box frame lawn and garden tractors and many
universal applications.
631-0009A Deluxe Shifter Knob
3/8 -16 Thread.
Fits Autodrive Step Thru Frame and many
universal applications.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Idler Pulleys
Page 14
Idler Pulleys - MTD Original Equipment
PART# TYPE
756-0558 FLAT
FLANGE
OD
OD
ID WIDTH MATERIAL
1.75"
1.49" .559" .570"
NYLON
756-0981A FLAT
3.13"
2.75" .379"
1.13"
756-0643A FLAT
4.00"
3.13" .379"
1.19"
STEEL
STANDARD
756-0627B FLAT
756-0627 FLAT
4.10"
4.10"
3.46" .378"
3.50" .377"
1.05"
1.15"
STEEL
COMPOSITE
SEALED ROLLER
SEALED ROLLER
756-0116
3.06"
3.06" .375"
.72"
STEEL
STANDARD
V
STEEL
BEARING TYPE
USES 741-0556
NEEDLE BEARING
STANDARD
NOTES
.375" THRU HOLE, USED ON RWD LM TRANS. ASSY.
BELT TENSIONER. SINGLE FLANGE ON IDLER.
USE WITH 1/2" OR A SECTION BELT.
756-0627 Plastic Idler Pulley with Roller Bearing
756-0643A Steel Idler Pulley
O.D.
3.5”
O.D.
3.13”
I.D.
.377”
Width
1.15”
I.D.
.379”
Width
1.19”
756-0981A Steel Idler Pulley
756-0627B Steel Idler Pulley with Roller Bearing
O.D.
2.75”
O.D.
3.46”
I.D.
.379”
Width
1.13”
I.D.
.378”
Width
1.05”
756-0116 Steel Idler Pulley
756-0558 Nylon Idler Pulley
O.D.
3.06”
O.D.
1.49”
I.D.
.375”
Width
.72”
I.D.
.559”
Width
.570”
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Wheels - Lawnmower and Tractor Deck
Page 15
634-0020 Lawnmower Wheel - Grey
634-0021C Lawnmower Wheel - Grey
8” x 1” Bar Tread.
1.42” Hub Length
1/2” Integral Bearing
Front Wheel Drive Self Propelled Models
8” x 1” Bar Tread
53 tooth internal gearing
Integral Bearing
Uses 738-0102 Axle Bolt
Uses 738-0102 Axle Bolt
734-1512A Lawnmower Wheel - Grey
8” x 2” ‘S’ Wave Tread
1.42” Hub length
1/2” integral bearing
Uses 738-0102 Axle Bolt
734-1981A Lawnmower Wheel - Black
9” x 2” Link Tread
1.42” Hub Length
1/2” Sleeve Bearing
Replacement bearing
741-0486B
Uses 738-0102 Axle
Bolt
734-1779 Lawnmower Wheel - White
7” x 1.5” Star Tread
1.61” Hub Length
1/2” Integral bearing
Uses 738-0533 Axle bolt with
736-0272 Flat washer
731-0981A Grey Lawnmower
Wheel Hub Cap
Oyster Grey - Used on 8” wheel
O.D. 5.7”
731-1426A Yardman Yellow Wheel
Hub Cap
Used on 8” wheel
O.D. 5.7”
(sold in single units)
734-0973 Deck Wheel 5” 1/2” I.D.
734-0974 Deck Wheel 6” 5/8” I.D.
NEW LOWER
PRICE on
734-0974 !
736-0105 Belleville
Washer
10622B Nylon Spring
(Black)
Mount convex side of washer
Ratchet return spring used on
against shoulder of the wheel axle rear wheel drive
bolt to ensure free spinning.
self propelled
lawnmowers.
734-3058B Deck Gauge Wheel
Assembly 5” O.D. 1/2” I.D.
(all sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Wheels and Drive Pinions
Page 16
Wheel Assemblies (Lawnmower, Tractor Deck) - MTD Original Equipment
PART# SIZE WIDTH
634-0020
8"
1.8"
TREAD
BAR
COLOUR BEARING
GREY INTEGRAL
1/2" ID X
1.42" L
GREY INTEGRAL
1/2" ID X
1.42" L
BLACK INTEGRAL
1/2" ID X
1.5" L
634-0021C
8"
1.8"
BAR
734-0973
5"
1.4"
SMOOTH
734-0974
6"
1.4"
SMOOTH
BLACK
734-1512A
8"
2.0"
S WAVE
GREY
734-1779
7"
1.5"
734-1981A
9"
2.0"
LINK
BLACK
734-3058B
5"
2.7"
SMOOTH
BLACK
STAR
WHITE
(DIAMOND)
BELLEVILLE
WASHER
P736-0105
(10PK)
BEARING,
BUSHING
NONE
AXLE BOLT
REQ.
738-0102
NONE
738-0102
P736-0105 53 TOOTH INTERNAL GEARING FOR
(10PK)
SELF PROPELLED LAWNMOWER
NONE
738-0373 Or
738-0533
W/736-0272
FLAT WASHER
P736-0105 FITS MOST CURRENT MTD RIDER
(10PK)
CUTTING DECKS. MANY UNIVERSAL
APPLICATIONS
INTEGRAL
NONE
738-0455
5/8" ID
NONE
738-0102
INTEGRAL
1/2" ID X
1.42" L
NONE
738-0533
INTEGRAL
W/736-0272
1/2" ID X
FLAT WASHER
1.61" L
738-0102
SLEEVE 741-0486B(1)
1/2" ID X
1.42" L
738-3056
BUSHING 748-0108(2)
W/736-0272
(2) REQ.
FLAT WASHER
1/2" ID X
2.42" L
NOTES
P736-0105
(10PK)
P736-0105
(10PK)
FITS OLDER MTD CUTTING DECKS.
MANY UNIVERSAL APPLICATIONS
P736-0105
(10PK)
BASIC LAWNMOWER WHEEL
P736-0105
(10PK)
P736-0105
FRONT GAUGE WHEELS FOR
(10PK)
44",46",50" CUTTING DECKS. MANY
UNIVERSAL APPLICATIONS
731-0908 Drive Pinion
731-0393 Drive Pinion
2.28” O.D.
13 tooth - Pin Driven
2.28” O.D.
13 tooth - Spline Drive
(sold in single units)
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
Drive Pinions - MTD Original Equipment
PART#
10914
OD
3.11"
#TEETH
18
DRIVE TYPE
MOULDED RECESS FOR DRIVE PIN
NOTES
1984 & PRIOR FWD
731-0393
731-0908
2.28"
2.28"
13
13
MOULDED RECESS FOR DRIVE PIN
36 TOOTH SPLINE DRIVE
1978 THRU 1987
1988 THRU 1995
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Springs - Torsion and Tension
732-0307A Deck Extension Spring
600 Series Lawn Tractors
Overall Length
Coil Length
11.10”
Page 17
732-0357A Extension Spring
Self Propelled Lawnmower - Rear wheel drive idler return spring
Overall Length
Coil Length
1.12”
.59”
6.25”
NEW LOWER
PRICE FOR
2004 !
732-0384 Extension Spring
732-0556 Extension Spring
Lawn Tractor
Overall Length
6.12”
Lawn Tractor
Overall Length
7.57”
Coil Length
4.66”
Coil Length
5.91”
732-0594A Extension Spring
Rear Discharge Door Torsion Spring
Rear Bagging Lawnmowers
1.80” Wide
Lawn Tractor
Overall Length
7.33”
Coil Length
5.66”
732-0677 L.H.
732-0678 R.H.
Springs (Extension and Torsion) - MTD Original Equipment
PART#
732-0307A
TYPE
EXTENSION
OVERALL
LENGTH
11.10"
COIL
LENGTH
6.25"
OD
.87"
WIRE
DIA.
.125"
# OF
COILS
50
NOTES
600 SERIES DECK SPRING
732-0357A
EXTENSION
732-0384
EXTENSION
1.12"
.59"
.33"
.035"
15
SP LAWNMOWER RWD, IDLER RETURN
6.12"
4.66"
.62"
.092"
50
732-0556
RIDER APPLICATIONS
EXTENSION
7.57"
5.91"
.94"
.135"
43
RIDER APPLICATIONS
732-0594A
EXTENSION
7.33"
5.66"
.91"
.120"
46
RIDER APPLICATIONS
732-0678
TORSION
1.80" WIDE
1.10"
.469" ID
.090"
11
RH SPRING, REAR BAG, LAWNMOWER
732-0677
TORSION
1.80" WIDE
1.10"
.469" ID
.090"
11
RH SPRING, REAR BAG, LAWNMOWER
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Bearings and Spacers
741-0155 Roller Bearing
741-0919 Roller Bearing
Used with 05034A bearing housing.
Chain case, Edger, and other
applications.
O.D.
I.D.
Width
1.375” .625”
.435”
Sealed Precision bearing used on
MTD rider deck spindles. Also
used in large frame
Snowthrower application
O.D.
I.D.
Width
1.850” .787”
.549”
741-0484 Roller Bearing
.5” I.D.
1.127” O.D.
.4” Wide
Page 18
NEW LOWER
PRICE FOR
2004 !
741-0569 Flanged Roller Bearing
.625” I.D.
1.380” O.D.
.438” Wide
1.50” Flange O.D.
Fits most current lawn
tractors with front roller
bearings
(sold in single units)
(sold in single units)
741-0524 Roller Bearing
.625” O.D.
1.570” O.D.
.470” Wide
Used in double pulley jackshaft assy
on two-belt decks.
Two bearings per pulley.
741-0340 Sleeve Bearing
748-0331 Shoulder Spacer
750-0456 Spacer
0.322” I.D. 0.624” O.D. 1.125” Flange O.D.
Idler bracket pivot spacer on many applications.
.792” I.D. 1.0” O.D. 1.0” L
Used In many blade spindles and wheel
assemblies.
.75” I.D.
1.0” O.D.
1.0” L
Oil impregnated sleeve bearing.
Axle bearing on most MTD single
speed transaxle assemblies.
(sold in single units)
750-0535 Spacer
.38” I.D. .625” O.D. .21” L
Lawnmower wheel spacer and
steering segment spacer on front
engine lawn tractors.
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Bushings and Bearings
Page 19
741-0487A Flange Bearing
741-0706 Flange Bearing With Grease Fitting
Front wheel bearing and steering axle bearing for 400 and 600
series lawn tractors, 1987 to present.
I.D.
O.D.
Length
.635”
.817”
1.00”
Front wheel bearing and steering axle bearing for 400 and 600
series lawn tractors, 2002to present. Use with 741-0487A.
I.D.
O.D.
Length
.635”
.817”
1.00”
(sold in single
units)
(sold in single units)
741-0659 Flange Bearing
741-0660 Flange Bearing
5/8” Steering axle bushing
I.D.
O.D.
Length
.632”
.937”
1.00”
3/4” Steering axle bushing
I.D.
O.D.
Length
.760”
.937”
1.00”
(sold in single units)
(sold in single
units)
741-0523 Flange Bearing
741-0244 Flange Bearing
Steering axle bushing 800 series Garden Tractor 1992 - 1995
I.D.
O.D.
Length
.757”
1.62”
.940”
I.D.
1.006”
741-0324 Hex Flange Bearing
O.D.
.665”
(sold in single
units)
Length
.590”
Length Flange
.800”
1.75”
Width (across flats)
1.238”
NEW LOWER
PRICE FOR
2004 !
(sold in single units)
I.D.
.506”
O.D.
1.498”
Flange
1.00”
Width (across flats)
.690”
741-0374 Flange Bearing With Flats
I.D.
O.D. Length Flange
1.012" 1.258" 1.00"
1.50"
Fits 1" front wheel steering axles
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Bushings and Bearings
Page 20
741-0248 Flange Bushing
741-0225 Hex Flange Bushing
I.D.
.510”
I.D.
Flange Width (across flats)
.630”
1.120” .874”
Fits Lawn Tractors with 5/8” front steering axles, steering
column bushings, etc.
O.D.
.757”
Length
.620”
Flange
1.00”
(sold in single units)
741-0312 Flange Bushing
I.D.
.750”
O.D.
1.25”
Length
1.185”
Flange
1.5”
(sold in single units)
741-0490 Flange Bearing With Flats
748-0227A Hex Flange Bearing
I.D.
O.D.
Length Flange Width (across flats)
.753”
1.25”
.750”
1.50”
.980”
Many Lawn Tractor and Snowthrower applications.
I.D.
O.D.
Length Width (across flats)
.629”
1.120” .620”
.876”
Fits Lawn Tractor Steering and Tiller Chaincase.
(sold in single units)
(sold in single units)
NEW LOWER
PRICE FOR
2004 !
NEW LOWER
PRICE FOR
2004 !
748-0108 Flange Bearing
748-0142 Flange Bearing - with locating boss
I.D.
O.D.
Length Flange
.503”
.752”
.590”
1.00”
Fits 734-3058B Deck Gauge Wheel Assy and other Lawn
Tractor and Snowthrower applications.
I.D.
O.D.
Length Flange
.502”
.688”
.590”
.880”
Fits Self-propelled Lawnmowers and chore performers wheel
axles.
(sold in single units)
(sold in single units)
741-0339 Flange Bearing
741-0353 Flange Bearing
I.D.
O.D.
Length Flange
.754”
1.00”
.925”
1.249”
Fits Lawn Tractor transmission and Snowthrower auger gear
boxes.
I.D.
O.D.
Length Flange
.630”
.815”
.750”
1.00”
Fits cutting deck, caster wheel yoke etc.
(sold in single units)
(sold in single units)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Popular Belts
Page 21
Belts (most popular) - MTD Original Equipment
PART#
754-0145A
NOMINAL ACTUAL
TOP
TOP
WIDTH** WIDTH CROSS LENGTH
(INCHES) (INCHES) SECTION (INCHES)
5/8”
.633"
5L
68.93”
APPLICATION
FITS 495/497/600 SERIES LAWN TRACTORS, WITH 38" SHALLOW DECK, MOWER
DRIVE
754-0266
1/2”
.511"
A SECT.
85.20”
FITS 600 SERIES LAWN TRACTORS WITH 5 SPEED, PEERLESS,TRANSAXLE,
TRACTION DRIVE, 1980s.
754-0280A
5/8”
.700"
B SECT.
53.17”
FITS 400/600/800 SERIES BOX FRAME LAWN OR GARDEN TRACTORS, EXCEPT
HYDRO MODELS, 2002 AND PRIOR, TRACTION DRIVE, ENGINE PULLEY TO
VARIABLE SPEED PULLEY
754-0281
5/8”
.700"
.700"
44.20”
FITS 400/600 SERIES LAWN TRACTORS 1990 AND PRIOR, TRACTION BELT,
VARIABLE SPEED PULLEY TO TRANSMISSION PULLEY
754-0329A
5/8”
.656"
B SECT.
69.42”
FITS ALL MTD 38" DEEP DECK 400/600 BOX FRAME LAWN TRACTORS, MOWER
DRIVE, ENGINE PULLEY TO DECK PULLEY
754-0349
1/2”
.531"
A SECT.
79.10”
FITS 46", 800 SERIES GARDEN TRACTORS, STEP THRU, BOX FRAME, AND
REVOLUTION 2001 AND AFTER, MOWER DRIVE, LOWER BELT (DRIVEN)
754-0350
5/8”
.672"
B SECT.
64.30”
FITS 46" 800 SERIES, BOX FRAME, GARDEN TRACTOR, MOWER DRIVE, ENGINE
PULLEY TO DECK PULLEY
754-0370
5/8”
.700"
B SECT.
48.50”
FITS 600 SERIES BOX FRAME LAWN TRACTORS, TRACTION DRIVE, VARIABLE
SPEED PULLEY TO TRANSMISSION PULLEY
754-0371A
5/8”
.700"
B SECT.
74.04”
FITS ALL MTD 42" DEEP DECK 600 SERIES BOX FRAME LAWN TRACTORS, MOWER
DRIVE, ENGINE PULLEY TO DECK PULLEY, AND MODEL 823 42" 2 STAGE S/T
ATTACH. FOR FAST ATTACH, STEP THRU LAWN & GARDEN TRACTORS, ALL
ELECTRIC CLUTCH APPLICATIONS, ENGINE TO UNDER CARRIAGE
754-0439
5/8”
.656"
B SECT.
60.09”
FITS 46", 600 SERIES, BOX FRAME, LAWN TRACTORS, MOWER DRIVE, ENGINE
PULLEY TO DECK PULLEY.
754-0465
754-0467
3/8”
5/8”
.364"
.660"
3L
5L
35.68”
90.80”
FITS 400 AND 500 SERIES SELF PROPELLED FRONT WHEEL DRIVE MOWERS
FITS AUTO DRIVE, STEP THRU, LAWN AND GARDEN TRACTORS, 1999 AND AFTER,
TRACTION DRIVE, ENGINE PULLEY TO VARIABLE SPEED PULLEY.
754-0472
5/8”
.656"
B SECT.
83.04”
FITS AUTO DRIVE, STEP THRU FRAME,LAWN TRACTORS, ELECTRIC PTO MODELS
WITH 42" DECK, 1999 MODEL YEAR ONLY
** Nominal Belt Width is for visual reference only. See Actual Top Width for dimensions.
"OEM" BELT CONSTRUCTION, (CORD MATERIAL,CORD DIAMETER, CORD PLACEMENT,COVER MATERIAL, TOP WIDTH, & LENGTH), ARE
DETERMINED BY, AND TESTED ON, THE APPLICATION THEY ARE DESIGNED FOR.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Cables, Throttle, ERS, and Choke
Engine Brake Cable - ERS
746-0550
746-0551
746-0552
746-0553
746-0554
746-0555
Cable Length
45.5”
49.5”
53.5”
42.5”
47”
61.5”
Page 22
Engine Brake Cable: Snap fit to handle
Conduit Length
39”
43”
49”
36”
40.5”
55”
Fittings
“Z”
“Z”
“Z”
“Z”
“Z”
“Z”
Conduit Length
37.5”
23”
29”
Bend
“Z”
“Z”
“Z”
746-0946
746-0957
Cable Length
60.25”
59.25”
Conduit Length
48.25”
37.25”
Fittings
“Z”
“Z”
Cable Length
38””
61.25”
Conduit Length
35.5”
58”
Bend
“Z”
“Z”
ERS = Extended Rope Start
Choke Cable: Tractor
746-0614A
746-0616A
746-3021
Cable Length
40.5”
26”
32”
Throttle Cable
Throttle Cable
746-0841
746-0842
746-0843
746-0844
746-0845
746-0847
Cable Length
62.5”
53.5”
57.5”
41.5”
47.5”
44.5”
Conduit Length
60”
51”
55”
39”
45”
42”
Bend
“Z”
“Z”
“Z”
“Z”
“Z”
“Z”
746-0634
746-0672
Engine Brake Cable
746-0737
Cable Length
55.5”
Conduit Length
51”
P746-0325A-D Throttle Cable Assembly
P746-0350-D Throttle Cable Assembly
45” Throttle Cable for most MTD Side Discharge
Mowers 1986 and prior.
Many universal applications.
Carded for Display.
70” Throttle Cable for most MTD Rear Discharge
Mowers 1986 and prior.
Many universal
applications.
Carded for Display.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Fittings
“Z”
Click to find your nearest source of Genuine MTD Parts
Lawnmower Parts
Page 23
811-0185 Throttle Control Box
746-0883 Cable Mounting Housing
Used on MTD walk behind and Self-propelled
lawnmowers model year 2001 and prior.
Includes 746-0876 Throttle
Lever, 746-0875 Throttle body
and hardware.
(sold in single units)
Used on MTD walk behind and Self-propelled
mowers with fixed-speed
throttle to secure ERS cable.
Mounts with:
710-1270 Screw
712-0324 Hex locknut
746-0876 Throttle lever
831-0823A Throttle Box Assembly
Available in kit 811-0185 pictured above.
Includes throttle housing halves, lever, and
mounting screw.
Dash-mount throttle control for
MTD 600 and 800 series box-frame
lawn and garden tractors.
746-0875 Throttle Body
731-0972 Throttle Lever
Also available in kit 811-0185 pictured above.
For box-style throttle control 1984-1981
(replaces 731-0528A)
NEW LOWER
PRICE FOR
2004 !
710-1205 Eyebolt - Recoil Rope Guide
For Extended Rope Start model Lawnmowers
1988 and later.
ERS System allows operator to start
mower from a safe position behind
the handle.
726-0371 Clip - Cord Retainer
Electric Lawnmower
Used on model year 2002 407 and 707
YardWorks and MTD
Electric Lawnmowers
Use 720-0279 1/4 - 20 wing nut
to secure eyebolt
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Lawnmower Parts
Page 24
749-0907B-637 Lower Handle - Long
749-0928A-637 Lower Handle
Extended Lower Handle - 31.5” MTD Walk-behind mowers
Standard Lower Handle - 24.5” MTD Walk-behind mowers
682-3025 LH Handle Bracket / Wheel Adjuster
682-3024 RH Handle Bracket / Wheel Adjuster
Used on side-discharge MTD push lawnmowers.
The spring lever is also sold
separately as 832-0404
Used on side-discharge MTD push lawnmowers.
The spring lever is also sold
separately as 832-0404
731-0872A Trailing Shield
17098 Trailing Shield Clip
Rear Flap 16.69”
Mounts with
17098 clips (2).
Used to mount safety trailing shield on MTD
walk-behind lawnmowers.
(sold in single units)
731-1236 Trailing
Shield
Rear Flap 17.69”
Mounts with 732-0700
wire (ordered separately).
731-0987B Chute Deflector Assembly
Fits most MTD side discharge lawnmowers
with flip up chute. Includes 747-0710 hinge
pin, 732-1014 torsion spring, 731-1035B
Hinged Chute Deflector,
and 17032A Chute
Deflector Adapter.
782-5007C Mulching Plug Rear Discharge Mowers
Fits 400 Series Rear Discharge
mowers 1992-2003.
731-1409B Side Chute Deflector
Fits most MTD side discharge/mulching lawnmowers.
Converts mowers with spring-loaded mulching door to side
discharge without tools.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Shoulder Bolts
Page 25
738-0213 Shoulder Bolt
738-0373 Shoulder Bolt
See chart below for more
information
See chart below for more information
738-0141 Shoulder Bolt
738-0143 Shoulder Screw
0.498 x 0.340
See chart below for more information
(sold as single units)
See chart below for more
information
738-0102 Wheel Axle Bolt
738-3056 Shoulder Bolt
(sold as single units)
See chart below for more information
See chart below for more
information
738-0481A Shoulder Bolt
738-0507B Shoulder Bolt
See chart below for more
information
See chart below for more
information
Shoulder Bolts - MTD Original Equipment
PART#
738-0141
OD
.435"
SHOULDER
LENGTH
.349"
THREAD
HEX SIZE
5/16-18 X .400"L
HEX
SIZE
5/8"
NOTES
LOCKING PATCH ON THREADS.
738-0636
.440"
738-0143
.496"
3.573"
5/16-18 X .538"L
1/2"
MUFFLER MOUNTING BOLT, B&S #93927
.336"
3/8-16 X .620"L
3/4"
738-0102
738-0213
.496"
1.445"
3/8-16 X .350"L
3/4"
.496"
1.445"
3/8-16 X .640"L
3/4"
738-0373
.496"
1.525"
3/8-16 X .620"L
3/4"
738-0533
.496"
1.635"
3/8-16 X .620"L
3/4"
738-3056
.496"
2.510"
3/8-16 X .750"L
3/4"
738-0481A
.496"
2.625"
3/8-16 X .550"L
3/4"
738-0507B
.498"
.429"
3/8-16 X .675"L
15/16"
738-0455
.623"
1.410"
3/8-16 X .500"L
15/16"
FITS MOST LAWNMOWERS WITH WHEEL ADJUSTERS
USED WITH 734-3058B GAUGE WHEEL ASSY
MTD began producing tools and dies in 1932
in Cleveland Ohio.
MTD Canada has been manufacturing in
Kitchener since 1962..
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Cotter Pins and Wing Nuts
Page 26
Cotter Pins - MTD Original Equipment
PART#
714-0104
714-0101
714-0145
LENGTH
1.13"
1.42"
1.64"
WIRE DIA.
.072"
.080"
.092"
FITS
1/4"(.250") PIN
1/2"(.500") PIN
3/8"(.372") PIN
RECOMMENDED HOLE SIZE
.110"
.140"
.140"
714-0101 Internal Cotter Pin
714-0145 Internal Cotter Pin
Fits 1/2” pin.
Fits 3/8” pin.
714-0104 Internal Cotter Pin
720-0284 Plastic Wing Nut
Fits 1/4” pin.
5/16 - 18 Thread
720-0314 Plastic Wing Nut
712-0397 Nylon Wing Nut
5/16-18 Thread
1/4 - 20 Thread
(sold as single units)
(sold in single units)
Wing Nuts (Thumb Screws) - MTD Original Equipment
PART#
MATERIAL
THREAD
NOTES
712-0397
NYLON
1/4-20
MOULDED IN BELL WASHER
720-0284
PLASTIC
5/16-18
INCLUDES 712-0429 NUT INSERTED INTO MOULDED WINGNUT
720-0314
PLASTIC
5/16-18
MOULDED PLASTIC THREADS
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Trimmer Parts
Page 27
791-610317B Inner Reel Spring
791-181468B Bump Knob - Speed Spool
Also available in a consumer package
as part # 49M0317K500
Used on: Y28, 2800R, 700R, 720R, 740R,
750R, 766, 768, 770R, 970
Also available in a consumer package
as part # 49M1468P500
Used on Speed Spool equipped models
including 705, 725, 767, 775, 825, 875,
and 975 and most YardMan Trimmers.
791-153066B Bump Knob Assembly
791-180814B Large Bump Knob Assembly
Also available in a consumer package
as part # 49M3066P500
Used on: Y28 and Y700, 2800R, 700R, 720R, 740R, 750R, 766,
768, 770R, 970 and most RYOBI, Yard Machines and Yard Man
curve-shaft trimmers.
Also available in a consumer package
as part # 49M0814P500
Used on 780, 790, 890, 2075, and 2090 in addition to current
straight shaft models.
791-612115 Gasket - Crankcase Cover
791-610675 Carb Gasket Single
All 28cc and 31cc RYOBI, Yard Machines and
YardMan Trimmer engines
NEW LOWER
PRICE FOR
2004 !
791-683856 Recoil Pulley
Used on 720R, 740R, 760R,
Older style, refer to Illustrated Parts List.
753-04232 Kit - Starter
Pulley
Used on 2800R, 700R
(model year 2002)
Replaces 181597
NEW LOWER
PRICE FOR
2004 !
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Trimmer Parts
Page 28
49V7543M006 Two-Cycle Oil 32:1
791-180062 RYOBI Two-cycle Tune-up Kit
4oz Bottles.
Premium Ashless formula, suitable for use in
all two-cycle engine applications.
Includes a loop of 0.080”
premium trim line, two cycle
oil, air filters, spark plug and
bump knob.
For RYOBI 28cc and 31cc
two-cycle model engines.
Includes fuel stabilizers !
While
quantities
last !
791-180852B Trimmer Spark Plug (4-cycle)
Only available through MTD. Replaces 180852
Fits all four-cycle trimmers.
NEW LOWER
PRICE FOR
2004 !
791-610311B Spark Plug (2-cycle)
Fits most hand-held two-cycle engines (trimmers and
others). Replaces 610311
NEW LOWER
PRICE FOR
2004 !
791-180000B Fuel Cap Assembly
791-180350B Air Filter Element
Also available in a consumer package
as part # 49M0000P500
Used on current RYOBI, Yard
Machines, and Yardman Trimmer
models.
Also available in a consumer package
as part # 49M3050P500
Fits current RYOBI, MTD, and
YardMan 28cc and 31cc twocycle engines.
791-683974B Primer Bulb Kit
753-04280 Flex Drive Shaft - Trimmer
Also available in a consumer package
part # 49M3974P500
Fits RYOBI, MTD, and YardMan 28cc
and 31cc two-cycle engines. Includes
primer line.
For model Y28, Y700, 2800R
Also
791-682039 Fuel Pickup
Assembly
Includes Fuel line, filter, and retainer
(not pictured)
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Trimmer Parts
791-180522B Dual Line Cartridge
Includes spool and 0.065” premium trim line.
Also available in a consumer package
as part # 49U0522L034.
Fits RYOBI 100, 125R and
Singer ET4714, ETE4714
Page 29
753-1160 Dual Line Cartridge
0.105” Red
Pre-wound convenience for MTD
Yard-Runner High-wheel string
trimmer mower.
791-180292B Singe line Cartridge 0.080”
791-180327 Complete Head Assembly
Includes spool and 0.080” premium trim line.
Also available in a consumer package
as part # 49U0292K500
Used on 150R, 155R
Single line assembly
Fits 150R, 155R
Replacement cartridge is 791-180292B
791-153577B Dual Line Cartridge
791-153700 Complete Head Assembly
Includes spool and 0.080” premium trim line.
Also available in a consumer package
as part # 49U3577L500.
Used on: 2800R, 700R, 720R,
740R, 750R, 766, 768, 770R, 970
and most RYOBI, Yard Machines
and Yard Man curved shaft
trimmers.
Includes spool and 0.080” premium trim line.
Used on: 2800R, 700R, 720R, 740R, 750R, 766, 768, 770R, 970
and most RYOBI, Yard Machines and Yard Man curved shaft
trimmers
791-147345B Dual Line Cartridge Orange
791-147498 Complete Head Assembly
Includes spool and 0.095” premium trim line.
Also available in a consumer
package
display as part # 49U7345K500.
Includes spool and 0.095” premium trim line.
Used on 780, 790, 880, 890 and most RYOBI, Yard Machines and
Yard Man Straight Shaft
trimmers.
Pre-wound spool is
791-147345B
Pre-wound cartridge is 791-153577B
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Trimmer Parts
Page 30
791-181460B .080” Speed Spool Cartridge
791-181469B Speed Spool Retro Fit Kit
Also available in a consumer package
as part # 49U1460K500
Fits all Speed Spool equipped units.
Fits RYOBI, Yard Machines, and YardMan Curved Shaft Trimmers
49U0375L034 Premium Trimmer Line 0.080”
GTL095 Premium Trimmer Line 0.095”
Convenient 50’ loop
Green - in clear clamshell
pack suitable for
showroom display.
140’ loop.
753-04216 Premium
Trimmer Line 0.105”
50’ loop Red
(not shown, in re-sealable bag not
clamshell)
OEM-743-0112
.155 Maxi-Edge Trimmer Line
For String Trimmer Mowers
Fits Yard-Man 250 Series walk behind
string trimmer mowers, 2001 & after.
Contains 10 pieces of commercial grade
line, each 18.5” long. Yellow colour.
791-181624 Replacement Battery Kit 12 Volt
Rechargeable Sealed Lead Acid - includes spade connectors and
spacers as shown.
Replaces 180361.
Fits model 150R.
OEM-743-0113
.130 Maxi-Edge Trimmer
Line For String Trimmer
Mowers
Fits Yard Machines 200 Series walk
behind string trimmer mowers,
2001 & after. Contains 10 pieces of
commercial grade line, 14.5” Red
Colour.
41AM155G034 Spare Battery
Pack
12 Volt Rechargeable Sealed Lead-Acid
Battery - includes charger.
Fits model 155R
Battery also sold separately as part
number 791-182391B
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
Click to find your nearest source of Genuine MTD Parts
Trimmer Parts and Accessories
791-145873B Four Tooth Brush Cutting Blade
Replacement Blade for two and
four cycle brush cutters.
Available in consumer package (as
shown) part # 49M5873P500
Page 31
791-613223B Edger Blade
Available in a consumer package (as shown)
as part # 49M3223K500
Fits 725RE Edge Trimmer and LE720 Lawn
Edger Trimmer Plus attachment.
Not a Universal Blade - Can
only be used on brush cutter
equipped models with extended
“J” handle, proper guard, and
hardware.
791-683274 Guard and Blade assembly
791-147823 Dual Line Cutting Head Assembly
Used on all 2-cycle curved shaft trimmer models except 740R and
750R.
Includes 0.080” premium trim line, head, and guard as shown.
Fits curve shaft non-speed spool models except 740, 750.
791-682075B Shoulder Strap
Universal strap fits most manufacturers
handheld power equipment models
equipped with a central eyelet.
While
Quantities
Last!
PSGN-20 NASCAR
Protective Safety
Glasses
Official NASCAR
branded wrap-around
style safety glasses. Grey
Plastic Lens.
Meets ANSI standards.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Trimmer Attachments
Page 32
Trimmer Plus Attachments
MTD, YardMan, and Ryobi gas trimmers that are TrimmerPlus capable offer not only the power of a gas engine, but also the versatility of an
interchangeable lawn and garden system. Attachment-capable trimmers feature the EZ-Link connector. EZ-Link allows the lower part of the shaft to
be switched out with a variety of multi-task attachments.
41AJLE-B054 Edger
41AJGC-B054 Cultivator
For Steel Bladed Edging.
Constant torque gearbox
Adjustable blade depth up to 2 1/2”
Larger guide wheel
Hardened 7-1/2” steel blade
2 year warranty
For Cultivating home garden beds
effortlessly.
Heavy Duty Gearbox.
Adjustable tine width from 6” to 10-1/4”
Heat treated 8” Steel tines
2 Year warranty
41AJHS-B054 Hedge Trimmer
41AJTP-B054 Tree Pruner
For Trimming Hedges and Shrubs.
16” replaceable blades
Dual Action for super smooth operation
Comfortable wrap around assist handle
2 Year Warranty
For pruning trees with ease.
Prunes branches up to 4”
2000 strokes per minute
Heat treated powdered metal gearing
Extension boom included
2 Year Warranty
41AJTB-B054 Turbo Blower
41AJBV-B054 Blower/Vac
For high velocity Blowing.
Up to 145 MPH velocity airflow for
ultra-fast clearing of large areas
Includes two multi-purpose nozzles
2 Year Warranty
For Blowing, Vacuuming and
Mulching debris.
Up to 120 MPH velocity airflow
Wide diameter tube for easy
debris collection
Large capacity lightweight bag
Vacuum automatically mulches
debris
2 Year Warranty
41AJST-B054 Snow Thrower
41AJSS-B054 Straight
Shaft Trimmer
For easy clearing of snow from Walks and
Driveways.
Tackles snow at a rate of up to 350 lbs. Per
minute
Handles snow op to 6 inches deep
Effortlessly tosses snow up to 20 feet
Clears a 12 inch wide path
Adjustable throw direction
Reliable belt drive transmission
2 Year Warranty
Pro-style straight shaft allows
for easy trimming under
shrubs and low branches.
It has .080 dual line, 16”
cutting path, speed spool line
replacement and bump head
line release.
1 Year Warranty
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Lawn and Garden Tractor Accessories - Fast Attach
OEM-190-672 Bumper Kit
Fits all MTD lawn & garden tractors.
Rugged all-steel bumper for added
safety and protection.
Replaces OEM-190-226
OEM-190-180 Twin Bag
Grass collector - 38” & 42” Decks
Fits all MTD Lawn Tractors with 38” & 42” high
vacuum decks. Replaces OEM-190-063 and
OEM-190-601.
Includes 2 nylon bags, 7”
diameter chute, deflector
hood, and mounting
bracket. 6.5 Bushel capacity.
Replacement cloth bag part
number 764-0221 (two
bags required)
OEM-190-842 Triple Bag Grass Collector - 54”
Deck
Fits auto drive step thru frame garden
tractors with 54” decks 2002 & after.
Includes 3 nylon bags, 8” dia. chute, fully
assembled mounting bracket, deflector
hood, 3 bagging blades (O.E. #7420679). 10 bushel capacity. No tools
required.
Replacement cloth bag part number
764-0251 (three bags required)
Coming Soon OEM-190-192 Triple
Bagger (Fits 50” and 54” decks)
OEM-190-604 Fast attach Tool
& Storage Chest
Fits auto drive step thru frame
lawn and garden tractors 1999 &
after. Mounts on rear of tractor
for easy transport of tools.
Includes portable tool tray. No
tools required.
Page 33
OEM-190-184 Dethatcher
Fits all MTD lawn & garden
tractors. Front mount design
means you can dethatch and bag
at the same time. Includes
dethatcher, mounting
hardware, & instructions.
Installs and removes in
minutes with no tools
required (after initial
assembly).
OEM-190-182 Twin Bag
Grass Collector - 46” Decks
Fits all MTD Lawn and Garden Tractors with
46”high vacuum decks.
Replaces OEM-190-602 ,
OEM-190-103, OEM-190-083, and
OEM-190-821
Includes 2 nylon bags, 8” diameter
chute, deflector hood, and mounting
bracket. 6.5 Bushel capacity.
Replacement cloth bag part number
764-0221 (two bags required)
NEW!
OEM-190-833 46”
Dozer Blade
Fits all MTD Lawn and
Garden tractors from 1996 to
current. Features quick change angle
adjustment from straight ahead to 30 degrees
left or right.. Adjustable skid shoes, spring
loaded blade return protects Blade and
Tractor. For maximum efficiency, use with
tire chains and wheel weights. Replaces the
190-620, 190-840, and OEM-190-822
OEM-190-607 Fast Attach
Deluxe Tractor Sunshade
Fits auto drive step thru frame
lawn and garden tractors 1999
& after. Durable 12 oz. Stop-rip
vinyl cover with steel tubular
frame. Easily removed for
mowing under limbs and for
bagging. Mounting hardware
included.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Lawn and Garden Tractor Accessories
NEW!
490-150-0015 Folding Arched
Aluminum Tractor Ramps
12” Wide Runner high traction ramp
plates for safe loading. Fully welded folding
design for
strength and easy transport. Each
ramp weighs only 16 lbs.!
Maximum capacity 1500lbs per
set (750lbs per ramp).
Arched design prevents mower
deck from hanging up on tailgate.
7 1/2’ length makes the grade
easier.
Page 34
OEM-190-808 Deluxe Tractor Sunshade
Fits MTD 600 & 800 Series tractors (except auto
drive step thru frame models 1999 &
after). Durable 12 ounce stop-rip
vinyl cover with steel tubular frame.
Easily removed for mowing under
tree limbs and for bagging. Mounting
hardware included.
OEM-190-823 42” Two-Stage Snow Thrower
Attachment
190-627 42” Two-Stage Snow Thrower
Attachment
Fits all MTD Autodrive step thru Series lawn and garden
tractors 1999 and after.
A 220 degree discharge control with
chute tilt and auger blade stop/start
are located for easy operator access.
Includes adjustable, replaceable skid
shoes and scraper blade.
“Fast-Attach” Installation.
Fits all MTD 600 Series lawn tractors (except
auto drive step thru frame models 1999 & after).
A 220 degree discharge control with chute tilt
and auger blade stop/start are located for easy
operator access. Includes
adjustable, replaceable skid
shoes and scraper blade.
OEM-190-751 Tractor Snow Cab
190-215 Wheel Weights (2 per set)
Fits MTD 600 series lawn tractors, and Autodrive Step thru fame
Lawn and Garden Tractors 1999 and after.
Provides three sided protection for
operator from wind and snow. Open
back design allows for ventilation.
Fits MTD 600 Series and Autodrive step thru lawn tractors.
Features non-corrosive polyethylene shell filled with Ferro
cement. Recommended for rear wheels
while using snow removal equipment.
Approx 62 lbs. Fits 8” rims.
190-784 Wheel Weights (2 per
set, boxed separately)
Fits all MTD 800 & 900 Series garden
tractors. Recommended for rear wheels
while using snow removal and ground
engaging equipment. Approx 102 lbs.
Fits 12” rims.
OEM-190-824 Fast attach Electric Sleeve Hitch
Fits auto drive step thru frame garden tractors 1999 & after.
Easily raises and lowers single point
rear mount attachments with dash
mounted toggle switch. Note :
requires drilling holes in dashboard
and connection of toggle switch and
wiring during installation.
OEM-190-825 Fast attach 30” PTO Driven
Rear Mounted Tiller
Fits auto drive step thru frame 800 series garden
tractors 1999 & after. Features dual
direction tines that can be operated
with a single lever. Tines are 15”
diameter and can only be raised or
lowered with optional electric lift
kit (OEM-190-824). It is
recommended that this attachment
be used with rear wheel weights.
Front weight kit included.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Lawnmower Grass Catchers and Accessories
190-088 Cloth Grass
Catcher
Fits MTD 400 series rear
discharge push and selfpropelled mowers with
“donut” style decks made
1991 and after. 2.3 bushel
capacity. Replacement Bag
part # 764-0309
Page 35
190-091 Cloth Grass Catcher
with deluxe “hard top”
Fits MTD 400 series rear discharge
push and self-propelled mowers
with “donut” style decks made after
1991
Replacement Bag part # 764-0433
OEM-110 Side Discharge
Grass Catcher
OEM-106 Side discharge
Grass Catcher
Fits all MTD side discharge
mowers with flip up chute 1989
& after.
Fits MTD & YARDMAN
106C, 108Q, 109, 149 and
570 series side discharge
mowers,
1.6 Bushel capacity.
190-092 Grass Catcher
Fits 21” MTD/Yardman 900
series rear discharge self–
propelled Mowers, 1997 &
after.
2.5 Bushel capacity.
OEM-104 Side Discharge Grass Deflector
(Rear Discharge Mowers)
Fits 21” MTD 400 series rear
discharge push and selfpropelled mowers built after
1991 with the “donut” style
deck. Also fits model 407
19” electric Yard Machines
and Yardworks Rear
Discharge mowers 2002 to
present.
OEM-190-115 Mulch
Kit (Side Discharge
Mowers)
Fits all 22” MTD side
discharge mowers. Includes
mulching blade with star
center hole, blade adapter
and baffle.
190-137 Side Discharge Grass Deflector
(Rear Discharge Mowers)
Fits all 21” MTD rear discharge push and selfpropelled mowers
built after 1991 with
both “donut” style
and “deep” style
decks; also fits
models 310, 320,
330, 360, 370, 380,
& 510, 1997 & after.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Lubricants and Accessories
737C0208 Lawnmower Engine
Oil SAE30
Premium 4-cycle oil meets or exceeds API
classification SE, SF, and SG/CD.
Meets Briggs & Stratton and Tecumseh engine
warranty requirements.
Page 36
OEM-737C0208-QP
Quarter Pallet Display of MTD
SAE30 Lawnmower Engine Oil.
200 bottles stacked for convenient
display and self-serve access in your
showroom.
Pre-measured amount for 2 through 6.5 HP
lawnmower engines.
20 Fl. Oz / 591 ml bottles.
737C0325
Two-Cycle Engine Oil
737C0303 Winter Engine Oil
SAE5W30
Smokeless and low ash formula 2-cycle
oil with fuel stabilizer.
Premium 4-cycle Snowthrower engine oil
meets or exceeds API classification SJ,SH and
SG/CF, CD.
One pack contains 6 2.6 oz. / 77ml
bottles.
Suitable for all two cycle engine
applications. Includes mixing chart for
ratios from 16:1 to 50:1
Meets Briggs & Stratton and Tecumseh engine
warranty requirements. Pre-measured and
packaged as a primary recommendation for 4cycle Briggs & Stratton and Tecumseh 8, 10
and 12HP engines without waste or spillage.
Exceeds JACO FC Specifications
28 Fl. Oz / 828 ml bottles.
490-900-0002
Siphon-All
49V7543M006 Two-Cycle Oil 32:1
Removes Oil From Crank
Cases Quickly & Cleanly!
Riders, Walk Behinds, Boats.
Transfers Fuel between ATVs,
Motorcycles, Snow Mobiles,
Gas Cans faster than any
comparable product.
Includes 48oz. reservoir.
4oz Bottles.
Premium Ashless formula, suitable for use
in all two-cycle engine applications.
With fuel stabilizers !
While
quantities
last !
190-059 Lawnmower
Display Stand
Universal display stand will
showcase three lawnmowers.
Sturdy tubular steel construction
assembles in minutes.
Maximize floor space while giving
customers eye-level view of
mower features.
MTD Logo - 1970’s
MTD introduced the Rear Discharge Rotary Mower
in 1973 and began marketing Shredders and
Power Vacuums.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance
These accessories are available from your local MTD Authorized Service Dealer or Select Retailer
Chore Performer Parts and Accessories
290-024 Yard-Vac
Hose Attachment
Fits MTD models 020 &
030 Yard-Vac. Allows for
close-in vacuuming. Hose
kit is 9 ft. length by 4 inch
diameter for maximum
performance. Easily
attaches with clips and
straps.
290-012 Yard-Vac Blower Kit
Fits MTD models 020, 030, & 060
Yard-Vac. Converts YardVac vacuum to leaf blower.
981-0490 Chipper Blade - Standard
Fits model 463 and 465 Chipper Shredder and 103 and
203 Chipper/Shredder/Vac. Use two per machine
742-0544 Chipper Blade - Hardened
Same as above but hardened steel for increased
durability and longer life. Fits model 463 and 465
Page 38
290-005 Chipper/
Shredder/Vac Hose Kit
Fits MTD models 103A and
203B. Allows for close-in
vacuuming. Hose kit is 10’
length x 5” diameter for
maximum performance.
964-04022 Replacement Cloth Bag for
Chipper/Shredder.
Fits models 463 and 465
Chipper Shredder.
Heavy duty, large
5.2 cubic foot capacity.
742-0571 Shredder Blade
Fits model 463 and 465 Chipper Shredder and 103
and 203 Chipper/Shredder/Vac.
Mounts with 2 x 710-0524 Screw
(5/16-24 x 1.02” countersink hex screw)
and 2 x 712-0411 nylock nut grade 8.
Chipper Shredder and 103 and 203
Chipper/Shredder/Vac.
Mounts with 2 x 710-0524 Screw
(5/16-24 x 1.02” countersink hex screw)
and 2 x 712-0411 nylock nut grade 8.
While
Quantities
Last!
MTD has offered provided premium Yardman products to
to Canadian since 1975.
PSGN-20 NASCAR
Protective Safety
Glasses
Official NASCAR
branded wrap-around
style safety glasses. Grey
Plastic Lens.
Meets ANSI standards.
If it says MTD on the outside… It should have MTD on the inside… Use Original Equipment Parts and Accessories for best performance