1. No category

City Select
Car Seat Adaptor
Instructions
The City Select Car Seat Adaptor is only compatible
with your City Select stroller.
NOTE: Before you start, please refer to
the Table of Contents on page 2 to ensure
you follow the proper instructions for your
car seat.
NOTE: When used as a single stroller, it is
recommended to insert the Car Seat Adaptor
into the lower mounting brackets.
This Kit Includes:
2 Adaptor Brackets
1 T-Shaped Support Bar
1 U-Shaped Support Bar
1 Straight Support Bar
1 Spring Support Bar
Adaptor Brackets
U-Shaped Bar
Straight Support Bar
Spring Support Bar
The sample product shown on this manual may differ slightly from your production quality Car Seat Adaptor.
This will not affect the assembly or functionality of your Baby Jogger product.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
Table of Contents
3
4
2
Baby Trend, Britax Chaperone, Cosco, Evenflo, Graco
Uses the 2 Adaptor Brackets and the
U-shaped Support Bar (facing up)
Baby Trend Expedition
Baby Trend Flex Loc
Baby Trend Gabriella
Baby Trend Stride Sport
Baby Trend StrideZ
Britax Chaperone
Cosco Sprint
Evenflo Aura Elite
Evenflo Embrace 5
Evenflo Embrace LX
Evenflo Journey Premier
Evenflo Nestino Odyssey
Graco Infant SafeSeat Step 1
Graco SnugRide
Graco SnugRide 2
Graco SnugRide 32
Graco SnugRide 35
1
Insert Adaptor Brackets into the corresponding mounting brackets
on your stroller. The Adaptor Brackets are secure when they click into place.
NOTE: The right and left mounting brackets on your stroller are determined by standing in front of and
facing the stroller.
3 Insert the U-shaped Support Bar with the curved end pointing up.
2 Open the compression locks on the Car Seat Adaptor by flipping the red latches up.
Peg Perego Primo Viaggio SIP
Peg Perego Primo Viaggio SIP 30/30
5
Britax Companion
6
Safety 1st Designer 22
Eddie Bauer Adventurer
7
Maxi Cosi Cabrio
Maxi Cosi Mico
4
Place your car seat onto the
U-shaped Support Bar. Adjust
the U-shaped Support Bar to
the proper length by sliding the U-shaped Support Bar in or out, using the car seat to ensure proper distance. The car seat
should be supported by the Adaptor Brackets.
5
Once the car seat is properly positioned, close the compression locks by flipping the red latches
down to hold Support Bars
in place.
6 Secure your car seat onto the stroller using the safety belt on the Car Seat Adaptor Brackets.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
3
Peg Perego
Britax Companion
Uses the 2 Adaptor Brackets, the U-shaped
Support Bar (facing down), the Straight
Support Bar and the Spring Support Bar
Uses the 2 Adaptor Brackets, the U-shaped
Support Bar (facing up) and the T-shaped Bar
1
Insert Straight Support Bar into the holes on the inside of the Adaptor Brackets and attach Adaptor Brackets to mounting brackets. The Adaptor
Brackets are secure when they click
into place.
NOTE: The right and left mounting brackets on your stroller are determined by standing in front of and facing the stroller.
5
Place your car seat onto the
U-shaped Support Bar, making sure that the Spring and Straight Support Bars engage the locking mechanisms where applicable. Adjust the U-shaped Support Bar to the proper length by sliding the U-shaped Support Bar in or out, using the car seat to ensure proper distance. The car seat should be supported by the Adaptor Brackets.
4
2 Open the compression locks on the Car Seat Adaptor by flipping
the red latches up.
3 Insert the U-shaped Support
Bar with the curved end
pointing down.
6
4
Connect the Spring Support Bar
by compressing and guiding it
into the open holes on the
U-shaped Support Bar.
Once the car seat is properly 7 Secure your car seat onto the
positioned, close the compression stroller using the safety belt on
locks by flipping the red latches
the Car Seat Adaptor Brackets.
down to hold Support Bars in place.
NOTE: Always securely
fasten the Bracket
Adaptor safety belt
over the car seat
before operation.
1
Insert Adaptor Brackets into the corresponding mounting brackets on your stroller. The Adaptor Brackets are secure when they click into place.
NOTE: The right and left mounting brackets on your stroller are determined by standing in front of and facing the stroller.
5
Once the car seat is properly positioned, close the compression locks by flipping the red latches
down to hold Support Bars
in place.
2 Open the compression locks on the Car Seat Adaptor by flipping
the red latches up.
3 Insert the U-shaped Support Bar with the curved end pointing up.
6
Place the T-shaped Bar onto the car seat and fasten to U-shaped Support Bar using D-Ring and Velcro strap.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
4
Place your car seat onto the
U-shaped Support Bar. Adjust the U-shaped Support Bar to the proper length by sliding
the U-shaped Support Bar in or out, using the car seat to
ensure proper distance. The
car seat should be supported by the Adaptor Brackets.
7 Secure your car seat onto the stroller using the safety belt on the Car Seat Adaptor Brackets.
5
Safety 1st & Eddie Bauer
Maxi Cosi
Uses the 2 Adaptor Brackets, the
U-shaped Support Bar (facing up) and
the Spring Support Bar
Uses the 2 Adaptor Brackets ONLY
1 Insert Adaptor Brackets into the corresponding mounting brackets on your stroller. The Adaptor Brackets are secure when they click into place.
1
Insert Adaptor Brackets into the corresponding Mounting Brackets
on your stroller. The Adaptor Brackets are secure when they click into place.
NOTE: The right and left
mounting brackets on your stroller are determined by standing in front of and facing the stroller.
5
6
Place your car seat onto the
U-shaped Support Bar, making sure that the Spring Support Bar engages the locking mechanism where applicable. Adjust the U-shaped Support Bar to the proper length by sliding the U-shaped Support Bar in or out,
using the car seat to ensure proper distance. The car seat should be supported by the Adaptor Brackets.
2 Open the compression locks on the Car Seat Adaptor by flipping
the red latches up.
3 Insert the U-shaped Support Bar with the curved end pointing up.
4
NOTE: The right and left mounting brackets on your stroller are determined by standing in front of and facing the stroller.
Connect the Spring Support Bar
by compressing and guiding it
into the open holes on the
U-shaped Support Bar.
2 Place your car seat onto the Adaptor Brackets until it clicks into place. The car seat should be supported by the Adaptor Brackets.
6
Once the car seat is properly positioned, close the compression locks by flipping the red latches
down to hold Support Bars
in place.
7 Secure your car seat onto the stroller using the safety belt on the Car Seat Adaptor Brackets.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
3 Secure your car seat onto the stroller using the safety belt on the
Car Seat Adaptor Brackets.
NOTE: Always securely fasten the Bracket Adaptor
safety belt over the car seat before operation.
7
Other Available Accessories
for your City Select stroller
Second Seat Kit
Allows you to convert your single City Select stroller into a
double. This kit comes with the complete second seat and
the second seat mounting brackets.
Bassinet Kit
Allows you to convert your City Select seat into a Bassinet.
The Bassinet Kit contains plush fabric and support brackets
that convert the City Select’s single seat into a Bassinet in
a few simple steps.
Child Tray
Features a cup holder and easy to clean surface.
Belly Bar
Provides child with a soft padded area to hold on to when
the stroller is in use.
Rain Canopy - Seat
Completely encloses the front and sides of the City Select
seat while providing ventilation in inclement weather. Made
from BPA and PVC Free material.
Rain Canopy - Basket
Nylon covering designed to protect the contents of the
City Select basket from inclement weather.
Rain Canopy - Bassinet
Completely encloses the top and sides of the City Select
Bassinet while providing ventilation in inclement weather.
Made from BPA and PVC Free material.
Carry Bag
Protects your stroller during transport or storage.
Universal Parent Console
Features a cup holder, insulated cooler pouch and an
additional storage compartment.
MP3 Console
Plug your MP3 player into the console and play music for
you or your child. Features a large storage compartment
and cup holder.
Glider Board
Attaches to rear axle of any single or double Baby Jogger
stroller to allow your toddler to ride along. Holds up to
45 lbs.
Foot Muff
For children 6-18 mo. Keeps legs & feet warm in
inclement weather.
Plush Stroller Hand Muff
Keeps your hands warm and dry while pushing your stroller.
Features a soft and plush interior and weatherproof exterior.
Cooler Bag
Designed to help keep food or drinks cold. Holds six
12 oz. cans.
Wheel Bag
Allows you to store your stroller wheels together in
one place.
For the most up to date information on our list of compatible car seats, please visit the FAQ section
of our website or call Baby Jogger customer service at 800-241-1848.
Car seat models or brands sold internationally are not always confirmed to be compatible with
Baby Jogger’s car seat adaptors. If you need assistance determining the compatibility of your international
car seat, please visit our website to locate the distributor nearest you.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com