SECONDARY RAW MATERIALS MANAGEMENT
SECONDARY RAW MATERIALS MANAGEMENT This service is especially relevant in regard to environment control, ecology and economy, it is associated with future of waste management activity. Secondary Raw Materials Management Secondary raw materials include waste fit for recycling: tare, glass, plastic, metal, paper and cardboard. A service of secondary raw materials management is special not only in ecological and economical aspect, but also due to the fact that this service is possible only with an active contribution of the society. Therefore the joint-stock company “Ecoservice” is active in holding social actions and supporting initiatives in which the society is informed about waste sorting methods and significance of sorting. The society learns how to produce new goods from the secondary raw materials, to save natural resources and energy, reduce volumes of waste getting into dumps; society is also informed about the impact on environment, deforestation, water and air pollution, costs of domestic waste management. We give our clients information on how to sort waste, where and which kind of waste should be thrown. Our specialists are always ready to help if any questions related to waste sorting arise. up to 40 per cent The amount you can save when sorting the domestic waste. The joint-stock company “Ecoservice” offers to sort secondary raw materials in the places where they are formed, so that as minimum as possible amounts of waste would get to dumps. Collection of secondary raw materials from individual house areas For individual house residents who are willing to sort domestic waste the joint-stock company “Ecoservice” offers coloured sorting bags for free. The waste sorted into these bags is regularly collected according to the schedule settled in advance. 25 kg Collection of secondary raw materials from apartment houses In apartment building areas and garage communities the company equips the secondary raw material sorting sites. In these sites three containers for secondary raw materials are placed: blue containers are used for paper, yellow – for plastic, and green containers – for glass. All the used containers correspond with LST EN standard requirements. One set of secondary raw material collection containers is placed for about 600 residents. The amount of secondary raw materials the average household accumulates per month. Collection of secondary raw materials from private enterprises and institutions We provide enterprises and institutions with all equipment needed to collect waste: coloured plastic bags and aesthetically looking boxes made of corrugated plastic. Furthermore, outside the enterprises and institutions we can place special containers used to collect secondary raw materials. Containers are removed for free, according to the schedule settled in advance. Collection of secondary raw materials from manufacturers Different production enterprises, commercial centres during their activity accumulate huge amounts of paper, film, other secondary raw materials and different packing waste. Therefore the joint-stock company “Ecoservice” offers such enterprises specific equipment – pressing containers, big-sized mesh containers (up to 5 cbm) or metal containers (up to 30 cbm). Such kind of service enables enterprises to easily and safely accumulate waste. WHY SORTING IS ESSENTIAL? Waste sorting is not a choice, but a duty, as it helps: • to save natural resources, water and electric power; • to save place in dumps – they are not expanding so rapidly, there is no need to look for more and more areas and funds to equip them; • to reduce waste management costs, as waste collection, removal and management is for free; • to let things be reborn for a new life instead of rotting for several hundred yeas in the nearest landfill; • to show that one is extremely concerned about in what kind of the world the future generation will live. SORTS AND SELECTION OF CONTAINERS The secondary raw material containers we offer to our customers are new and modern, waste is removed by special heavy goods vehicles equipped with presses and container lifting mechanisms. • Convenient and light. • Resistant to UV rays, temperature changes. • Dimensions: 70x35x35 cm. • Made of corrugated plastic. • Two types of lids: with a waste removal opening or airtight. 86 l • Made of high-quality polythene. • Bags of different thickness and solidity, adjusted to only certain kind of waste. • Out of use, may be totally recycled. 120 l 1,8–2,5 cbm 1,1 cbm • • • • • • • Resistant to UV rays, temperature changes. Solid handles, easy to lift and transport. Dimensions: 135 x 125 x 107 cm. Rubber wheels, 20 cm in diameter, easily turning in all directions. All the metal parts are galvanized and protected from corrosion. Out of use, a container may be totally recycled. Lids may have special round or rectangular openings to throw waste in. • Bell-formed containers with a rounded bottom, opening outside. • Made of glass plastic material, almost nonflammable, resistant to blows, deformations, impact of atmosphere. • Metal parts of a container are protected from corrosion. • With a fixed loop, adjusted to lift by lifting mechanism with a hook, and with an adjustable loop, used for automated opening. • Dimensions: height – 160 cm, diameter – 174 cm. • Containers are marked with labels “Glass”, “Paper” or “Plastic” and waste throwing instructions. • Out of use, a container may be totally dismantled. • A container used for waste that may be pressed (plastic, paper, domestic waste, sawdust, etc.). • Convenient in those enterprises where more than 40 cbm of waste is formed per week. • Press must be plugged in. • A container body may be made of metal sheets or metal mesh. • Solid, protected form corrosion, resistant to temperature changes. • Extremely convenient for usage in commercial objects. • Protects the collected raw materials form plunderers. 3–5 cbm 20 cbm • A container is placed on the vehicle platform. • It is used for waste that may be pressed (plastic, paper, domestic waste, sawdust, etc.). • Such containers collect waste from reservoirs where waste is poured out through the bottom. 20 m3 • A very big-sized container used for light waste. • Inside, the container may be divided into several sections, in order to collect different sorts of waste at the same time, e.g. paper, plastic and glass. • A tent may be used, so that waste would not blow off during transportation. 25–38 m3 Collection of secondary raw materials Secondary raw materials are collected by specific vehicles, equipped with presses and container lifting equipments. PREPARATION OF SECONDARY RAW MATERIALS FOR RECYCLING The secondary raw materials collected by the joint-stock company “Ecoservice” are once more sorted out in sorting bases: paper is sorted into 7 sorts, glass – into 2, and plastic waste – even into 18 sorts! Wood and metal waste is also separated from the whole waste flow. The raw materials following the sorting process are pressed and given over to recycling companies, and here they again are reborn for a new life. UAB “Ecoservice“ • Jočionių str. 13, LT-02300 Vilnius • Tel. (8 5) 264 9251 Quality tel. 8 687 44 444 • E. mail. [email protected] • www.ecoservice.lt
© Copyright 2024