1. pets
2. large animals

Dear SLP Customer,
Riding a UTV is as much about the journey as the destination.
And making the journey more exciting is what we specialize in.
Whether your journey takes you through the deep dark woods, up
a twisty mountain trail, onto the scorching sands, into the deepest mud holes or across the nastiest rocks this earth has to offer,
we can help. We have many new and exciting products that add
protection, performance and comfort scattered throughout the
pages of this catalog. Please feel free to contact one of our knowledgeable representatives with any questions you may have.
Always Ready to Serve,
The Starting Line Products Crew
RZR Doors
2008-10
Polaris 570 RZR, 800 RZR,
RZR-S and RZR XP 900
for
SLP’s RZR Doors partially enclose the cab area to
help keep dust, dirt, mud, and water out. Our unique
hinge design allows the door to be easily removed.
These doors use a rear mounted hinge with the latch
in the front for ease of entry and exit. The springloaded interior latch assembly allows quick and easy
access with only a light push or pull required on the
door to latch it closed. Designed to provide the operator and passenger a more comfortable off-road experience, these doors utilize a lightweight tube frame
design with plastic hard side. Sold per pair.
PART #
67-144
67-122
67-122
DeSCRiPTion
2008-10 RZR and RZR-S
2012 570 RZR
2011-12 800 RZR and RZR-S
2011-12 RZR XP 900
raphic
Door G
ming
Kits Co
n
Soo !
2011-12
PRiCe/PAiR
429.00
429.00
429.00
Part # 67-144 now utilizes the same popular
interior latch design as part # 67-122.
3
Rocker Armor™ for Polaris RZR
SLP’s Rocker Armor™ protects the underside of the Polaris RZR
against rocks and other hard objects without losing valuable
ground clearance. Made
RZR 900 XP Rocker Armor
of high-tensile steel for
superior strength. They
slide easily over sharp
rocks and are extremely
resistant to gouging. The
protection area covers
from wheel well to wheel
ated
well and they are powder
Integr
ank
T
l
e
Fu
coated for maximum durability. InR XP
Z
(R
Guard
).
cludes mounting hardware and inly
900 on
stallation instructions. Sold per pair.
PART #
67-100
67-103
67-109
67-110
67-126
67-127
67-145
DeSCRiPTion
570/800RZR and RZR-S
570/800RZR and RZR-S
800 RZR-4
800 RZR-4
RZR XP 900**
RZR XP 900**
RZR-4 XP 900
CoLoR
PRiCe/PAiR
Silver and Black
255.00
Black Texture
255.00
Silver and Black
479.00
Black Texture
479.00
Silver and Black
299.00
Black Texture
299.00
Black Texture
TBA
*Free freight is available for ground service only on SLP’s choice of carriers.
**RZR 900 Rocker Armor has an integrated fuel tank guard.
4
RZR/RZR-S Rocker Armor
800 RZR-4 Rocker Armor
ight*
Free Fre
to Lower
s
48 State
Performance Slip-on Silencer for Polaris 800 RZR
This performance slip-on silencer for the Polaris RZR is designed for maximum
airflow without substantially increasing sound level output. It provides a 79%
increase in airflow over the stock silencer. This results in a substantial
performance improvement, showing better throttle response as well as top-end
horsepower. The sound levels are within 2 decibels of stock (90 dBA on SAE
J1287 test) for a trail friendly performance silencer. It also features a removable
Forest Service approved spark arrestor.
PART #
09-106
DeSCRiPTion
2008-12 Polaris 800 RZR, RZR-S and RZR-4
PRiCe
279.95
Super Silent Muffler for Polaris 800 RZR, RZR-S and RZR-4
This muffler for the Polaris RZR is an incredible 5 decibels quieter than stock
while providing a 41% increase in airflow (20 more cfm) for more power. The
subtle sound of this muffler provides a relaxing environment for the rider and
passenger to carry on a conversation easily while under way, not to mention the
benefit to others in the surrounding area. Whether you are using your RZR to get
you in and out of your favorite hunting spots, or just want to have a more enjoyable ride with less noise, this muffler is perfect for you.
PART # DeSCRiPTion
09-108 2008-12 Polaris 800 RZR, RZR-S and RZR-4
PRiCe
355.95
Features a removable Forest Service approved spark arrestor.
note: 2009 standard RZR will require the rear differential stabilizer
bracket to be changed to the 2010 rear differential stabilizer
bracket (Polaris Part number 3235062).
ter on
5 dB quie
87
SAE J12
ry
a
n
o
stati
300 RPM
test @ 3
5
Performance Slip-on Muffler for Polaris RZR XP
900 and RZR-4 XP 900
This new slip-on silencer for the Polaris XP 900 RZR delivers well over double the airflow compared to the stock
silencer. This translates into a substantial performance
increase and better throttle response. Its stainless steel
construction provides excellent strength and durability.
The sound level measures 91.5 DB using the SAE J
1287 sound test. It also includes a spark arrestor that
can be added for trail use.
PART #
09-109
DeSCRiPTion
2011-12 RZR XP 900
and 2012 RZR-4 XP 900
Have you seen PowerSports Adventures?
For the second year in a row we have teamed up with the television
show PowerSports Adventures as their title sponsor. Every episode
combines motorsports action with outdoor recreation while showing
some of the latest products for your RZR in action. If you haven’t taken
the opportuninty to see this show we encourage you to tune in and
watch the next episode. It can be found on the Pursuit Channel (DirectTV channel 608 or DishNetwork channel 240) or on the Altitude
Sports and Adventures Channel (DirectTV channel 681 or DishNetwork
channel 410). If using another TV provider check your local listings. Visit
our website (www.startinglineproducts.com) and click on the
PowerSports Adventures link to learn more or to watch previous episodes.
6
PRiCe
475.00
Front Bumper kit
for Polaris 570 RZR, 800 RZR, RZR-S,
RZR-4, XP 900 RZR & XP 900 RZR-4
Whether bajaing down a nasty trail or creeping across
rocky, rugged terrain, this bumper kit protects well against
the gnarliest conditions. Made of 1 3/8” x .095” wall DOM
for strength then powder coated for a great look and
maximum durability. It also features
two anchor points for D-Rings, as
ight*
well as mounting points for Baja
Free Fre
Lights. Kit includes all mounting
to Lower
s
hardware and installation instruc48 State
tions.
2008-10
note: This kit mounts to factory upper mounting location
on RZR 570/800 models . To increase strength of this
mounting position, use SLP High Strength Upper Mount
Kit (part #67-129) see page 8.
PART #
67-101
67-104
67-123
67-125
DeSCRiPTion
2008-10 Silver and Black
2008-10 Black Textured
2011-12 Silver and Black
2011-12 Black Textured
PRiCe/kiT
400.00
400.00
350.00
350.00
2011-12
*Free freight is available for ground service only on SLP’s choice of carriers.
7
High Strength Front Bumper Upper Mount kit /
Radiator Support
for
Polaris 570/800 RZR, RZR-S and RZR-4
This kit replaces the stock radiator mount bracket that also
acts as an upper mounting point for most bumpers. It is
made of high-strength steel that has been reinforced so that
it can take more impact in the event of a crash without the
bumper folding into and damaging the radiator and other
front-end components. Compatible with most factory and
aftermarket front bumpers.
Front Skid Plate
for
Polaris 570/800 RZR, RZR-S and RZR-4
This skid plate covers the area between the SLP Front Bumper and the
stock center plastic skid plate, which is the section of frame where the aarms mount. It is made from high-tensile strength steel to protect against
rocks and other hard objects without losing valuable ground clearance.
This material slides easily over sharp rocks and is extremely resistant to
gouging.
PART #
67-130
8
PRiCe/kiT
35.00
PART #
67-129
PRiCe/kiT
75.00
Rear Bumper kit for 2008-12 Polaris
800 RZR, RZR-4 and 2011-12 800 RZR-S
This rear bumper kit is a must for any RZR owner! In stock form there
is no protection for the rear of the vehicle. This kit protects your investment, looks great, and opens up additional storage area. It incorporates a rear tire mount, freeing up trunk space to haul the necessary
gear so you can fully enjoy your outdoor experience. It also features a
flag mount. Made of 1 3/8” x .095” wall DOM for strength then powder
coated for a great look and maximum durability. Kit includes all mounting hardware and installation instructions.
noT for 2009-10 RZR-S.
PART #
67-102
67-105
DeSCRiPTion
Silver and Black
Black Textured
PRiCe/kiT
375.00
375.00
ight*
Free Fre
to Lower
s
48 State
Tire not included.
*Free freight is available for ground service only on SLP’s choice of carriers.
Trailing Arm Guards for Polaris XP 900 RZR/RZR-4
Made out of UHMW plastic for super strength and wear resistance, these trailing arm guards provide great protection in all
conditions, but especially in the rocks where they slide easily
over hard surfaces. They compliment the use of our Rocker
Armor (page 4).
PART #
67-137
PRiCe/PAiR
250.00
9
Secure Storage Glove Box for
Polaris RZR all models
This attractive aluminum glove box from SLP offers well-needed storage for the Polaris RZR. It is built with a strong aluminum body and
faceplate that utilizes a keyed lock for securing your valuables. The
position that it is located in provides the passenger easy access to
this storage, which is great for cell phones, cameras, small handguns, wallets, vehicle registration, etc. Also, it is weather resistant to
protect your valuables.
PART #
67-121
67-128
DeSCRiPTion
Polished Aluminum
Black Texture
PRiCe/kiT
155.00
155.00
Billet Gas and Brake Pedal Covers
Polaris 570/800 RZR, RZR-S, RZR-4 and
XP 900 RZR and RZR-4
for 2009-12
These billet pedal covers bolt to the stock steel pedals to give you a trick
billet look as well as increased performance. The stock gas pedal will not
reach full throttle without turning your foot sideways to force the pedal
down to full throttle. The additional height of this billet gas pedal comfortably gives you the extra 7% throttle opening the stock pedal lacks. This
allows you to comfortably achieve full throttle every time you desire it.
The unique pattern on these pedals provides the
PART #
PRiCe/SeT
proper amount of grip on the bottom of your foot.
67-138
84.95
Sold per set. Will not fit 2008 models.
10
Shown with pedal
covers installed on
stock levers. Levers
not included
Universal 1/2” D-Ring
This Universal D-Ring can be mounted to the SLP front bumper
mounts and gives your RZR a rugged offroad look while adding
easy access to winch or tie down points (fits perfectly on the points
of the SLP Front Bumper). Load rated at
4,000 pounds and galvanized for
strength and durability. Requires a 5/8”
hole for D-Ring pin, the D-Ring loop is
1/2” diameter.
PART #
67-117
PRiCe/eA.
10.95
1/2” D-Ring and Stinger Combo
for Polaris 570/800 RZR, RZR-S and 800 RZR-4
This D-Ring and Stinger Combo gives you a solid towing/pulling point on
your RZR without risking damage to the frame or suspension. The D-Ring
is load rated at 4,000 pounds and galvanized for
strength and durability. The stinger is made from
solid billet 6061 T-6 aluminum for a strong, lightweight and durable part.
PART #
67-119
PRiCe/kiT
34.95
Will fit Class ii (1 1/4” x 1 1/4”) receivers.
11
Hood Grill / Radiator Vent kit
for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent kit not only provides a trick new look but also delivers an
additional 116% more air intake surface area to the radiator. This allows the
radiator to more efficiently cool the engine while moving. Offered with honeycomb or oval pattern backer.
PART #
67-135
67-140
Oval
Honeycomb
Description
PRiCe/kiT
Grill kit with honeycomb backer
59.95
Grill kit with oval backer
59.95
Lower Radiator Vent Grill with Hood Hold Down
for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent grill with honeycomb pattern gives an awesome look while
providing a positive hold down for the hood.
PART #
67-139
12
PRiCe/kiT
49.00
Wheel Spacer kits
for Polaris
RZR all models
These wheel spacer kits allow you to widen your RZR, RZR-S, RZR-4 or RZR XP
900 for more stability when running high speed tight trails/roads or crawling over the
nastiest rock piles. It does so by giving you an additional 7/8” or 1 3/4” width per
side (1 3/4” or 3 1/2” overall). These wheel spacers utilize a locking ring (also known
as Hub Centric) that fits precisely into the wheel to provide maximum strength, durability and proper balance. This locking ring locks the wheel to the spacer and by doing so places the majority of the stress on the wheel spacers themselves rather than on the studs alone. Also, by ensuring the
wheel is centered with this Hub Centric ring, proper balance is maintained. They are manufactured from
high quality billet aluminum and are precision CNC machined to ensure perfect fit and proper balance.
These wheel spacers can be used on all RZR models with some limitations based on wheel offset and tire
size, see our recommendations below. Simple bolt on installation with no permanent modifications required.
Sold per pair.
7/8” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular
applications are RZR-S, RZR-4 and RZR XP 900 models to give them more stability. They also work great
on standard RZR models if using larger than 26” tires or aftermarket wheels with more offset than stock
(this is the maximum width that can be used and still keep the tires from contacting the rear of the front
fender well when turning and going through the bumps). They also allow the use of 12” wide rear tires on
stock wheels without contacting the frame (standard RZR).
1 3/4” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most
popular applications are standard RZR models using 26”
PART # DeSCRiPTion
PRiCe/PR
tires or smaller and stock offset wheels. This provides the
67-142 7/8” Wheel Spacer Kit
104.95
standard RZR much more stability and they can be re67-143
1
3/4” Wheel
Spacer
Kit
124.95
moved easily to return to stock width for running 50” trails.
Sold per pair.
13
Gas Tank Armor for Polaris 570/800 RZR
Gas Tank Armor is a must have for all 570/800 RZR, RZR-S, and
RZR-4 owners. This product will keep rocks, sticks, and any other
sharp objects from piercing the exposed rear portion of the gas
tank. It is compatible with SLP Rocker Armor™ and is manufactured
from 0.090” thick aircraft grade aluminum.
PART #
67-112
DeSCRiPTion
570/800 RZR, RZR-S & RZR-4
PRiCe/kiT
54.00
*For fuel tank protection on the RZR XP 900, see our
Rocker Armor™ on page 4.
Mud Guard for Polaris 570/800 RZR
The Mud Guard will keep rocks, sticks, and any debris from building
up in your undercarriage on the driver side of your vehicle. It’s compatible with SLP Rocker Armor™ and is manufactured from 0.090”
thick aircraft grade aluminum. Fits all 570/800 RZR, RZR-S, and
RZR-4.
67-113 Pictured
PART # DeSCRiPTion
PRiCe/kiT
67-113 2008-10 800 RZR and RZR-S
62.00
67-114 All 800 RZR-4,
74.00
2011-12 570/800 RZR and RZR-S
Highly recommended for use with Rocker Armor.
14
Power Commander V from Dynojet
The Power Commander V fuel controller from Dynojet gives you full EFI tuning
capability. It plugs into the stock ECU and allows you to add or subtract fuel
from the stock ECU settings. It is based on a throttle position verses RPM fuel
map with input points at ten different throttle positions and in 250 RPM increments to give you pinpoint accuracy. SLP has created maps to optimize performance and fuel economy for specific combinations. These fuel maps can be
preprogrammed into the controller at no charge for true plug and play capability.
For the experienced tuner, the controller comes with a computer link cable and software for custom
mapping capabilities. No wiring modiPART # DeSCRiPTion
PRiCe
fications are required (OEM style con70-124 2008-10 Polaris 800 RZR, RZR-S and RZR-4 379.95
nectors are supplied) and no
70-141* 2011-12 Polaris 800 RZR, RZR-S and RZR-4 399.95
permanent changes are made to your
70-142* 2011 Polaris RZR XP 900
399.95
stock system.
70-147* 2012 Polaris RZR and RZR-4 XP 900
399.95
* Note: These models (part numbers 70-141, 70-142 and 70-147) have the ability to manipulate
ignition timing and Rev-Xtend capabilities.
Power Commander Accessories for Experienced Tuners
SLP offers many tuning aids
to help experienced tuners
make their own maps.
Please inquire or visit our
website for more information.
PART #
DeSCRiPTion
PRiCe
PART #
DeSCRiPTion
PRiCe
PART #
DeSCRiPTion
70-136
LCD Display
299.99
70-132
Wideband 2
499.00
70-126
Autotune
70-135
1GB SD Card
15.95
70-134
CAN Cable
17.00
PRiCe
279.99
15
ergonomic Grab Handle with
Wrist Restraint for Polaris RZR,
RZR-S, RZR-4 and RZR XP 900
This grab handle is built for comfort and safety! Its curved design
places hands in a natural position for a more comfortable ride for the
passenger. It features Wrist Restraints which keep hands positioned
on or near the grab handle in the case of a roll over. The adjustable straps allow these restraints to
be used by adults or children. The natural tendency in a roll over situation is to let go of the grab
handle and put your hand out to catch the vehicle. When using these restraints, the passenger is
reminded to keep their hands firmly planted on the grab handle.
PART #
67-116
67-115
DeSCRiPTion
Ergonomic Grab Handle with Wrist Restraint for 2008-11 models
Wrist Restraint Only for 2008-12 models (only works with stock grab bar)
PRiCe/kiT
79.00
14.99
Clutch Vents for Polaris 800 RZR, RZR-S and RZR-4
These clutch vents are installed into the clutch cover to allow more air to flow into the clutch
enclosure to reduce clutch and belt heat and help maintain proper
performance. It utilizes a special pre-filter material that repels
water and keeps dirt out yet maintains high airflow.
Sold in a set of 2 vents.
16
PART #
67-108
PRiCe/PAiR
49.95
TeAM Tied Driven Clutch for Polaris RZR
This secondary clutch allows you to change helixes and springs to get the
most performance out of your RZR. The stock secondary clutch that comes on
the 2009 and newer Standard RZR as well as 2010 and newer RZR-S and
RZR-4 is an inexpensive model that has the helix cast into the moveable
sheave of the clutch. Changing to this clutch allows you to use a helix that is
more suitable to your RZR's setup and typical riding conditions. Sold as a
complete assembly less helix and spring.
For a custom SLP recommendation that is specific to your combination, please
call or e-mail ([email protected]) an SLP representative and have the following information available: elevation you typically ride at, conditions you plan on riding in (i.e.: sand, snow, mud or typical trail), tire
size, engine modifications that add power, and the weight
PART # DeSCRiPTion
PRiCe/eA.
you have added to your vehicle. Clutch kits available for 50-301 RZR Driven Clutch
249.00
most popular applications, see pages 18 and 19.
Multi-Angle Driven Clutch Helixes for Polaris RZR
These helixes make the RZR more responsive in all conditions and much less prone to RPM and topend power loss in higher load conditions (sand, snow, mud etc.) as well as at higher elevations and
when running larger, more aggressive tires.
note: Many RZR models came with a clutch that had the helix cast into the moveable
sheave. On these models, the helix is non-replacePART # DeSCRiPTion
PRiCe/eA.
able (2009 and newer Standard RZR as well as
50-300* 70-58.33
79.00
2010 and newer RZR-S and RZR-4 800). These
50-302* 52 Straight
79.00
models must use the TEAM Tied Clutch shown
50-330 54 Straight
99.00
above in order to change the helix.
*Will not fit 900 XP RZR
17
Clutch kits for Polaris RZR
SLP clutch kits have been designed and tested to get the most performance
out of your RZR. We have been working with centrifugal clutches for over 40
years, and we know how to tune them to transfer your horsepower to the
ground. In most circumstances, optimizing the clutch setup in your RZR is the
best performance gain for the dollar spent. Through our testing we have found
that the RZR needs two distinctly different clutch setups depending on what
type of terrain that you are riding in.
Trail Clutch kit:
The SLP Trail Clutch Kit is designed for RZRs that are typically ridden on semi hard surface trails with the occasional run in muddy or sandy conditions. These Trail Kits have been designed for RZRs running standard
size tires with stock engines. They provide improved throttle response with better top end power and consistency over a broad range of elevations and conditions. If aftermarket performance modifications and/or larger
or more aggressive tires have been added, please let us know so we can tailor your clutch kit accordingly.
Sand, Mud or Large Tire Clutch kit:
The SLP Sand, Mud or Large Tire Clutch Kit is designed for RZRs that are primarily ridden in high load environments such as sand dunes, sandy, muddy or snow covered trails, or on models that have added larger
more aggressive tires (up to one inch larger than stock). When exposed to these high load conditions, RZR’s
with stock clutching perform poorly, leaving the vehicle with poor throttle response and loss of RPM at wide
open throttle. In many cases the operator has to shift prematurely to low range which reduces wheel speed
and performance. These clutch kits match the power of the engine with the higher loads being applied to it to
keep the throttle response snappy and top end RPM and horsepower at their peak for a much more enjoyable
ride. If aftermarket performance modifications have been added, or if you are running paddles or tires even
larger than specified above, please let us know so we can tailor your clutch kit accordingly.
For clutch kit application chart, see the next page.
18
Clutch kit Application Chart for Polaris 800/900 RZR
elevation
0-4500’
Model
Part #
Price
0-4500’
Sand, Mud or
Larger Tires
Part#
Price
Description
Trail kit
4500’ +
Part #
Price
4500’+
Sand, Mud or
Lager Tires
Part#
Price
2008 Standard RZR 800*
41-700
233.85
41-800
233.85
41-701
233.85
41-801
233.85
2009-10 Standard RZR 800* 41-702
482.85
41-802
482.85
41-703
482.85
41-803
482.85
2009-10 RZR-S 800
41-704
482.85
41-804
482.85
41-705
482.85
41-805
482.85
2010-11 RZR-4 800
41-706
482.85
41-806
482.85
41-707
482.85
41-807
482.85
2011-12 Standard RZR 800* 41-708
482.85
41-808
482.85
41-709
482.85
41-809
482.85
2011-12 RZR-S 800
41-710
482.85
41-810
482.85
41-711
482.85
41-811
482.85
2011-12 RZR 900
41-712
223.95
41-812
347.90
41-713
223.95
41-813
347.90
Trail kit
note: 2008 and 2009 Standard RZR 800 models require shimming for proper belt clearance.
Shims and instructions included.
* Requires RZR-S belt Polaris Part #3211133.
Tech Tip:
A question we often hear is, “What RPM should I expect my RZR to run at wide open throttle?” This depends on the RZR
Stock exhaust
Descritpion
WoT RPM ReV Limit
Configuration
you have. The following chart
2008-10 Standard RZR 800
2 into 1 Manifold 6200-6400
6500
shows you where we like to rev
6300-6500
6750
the different RZR engines at wide 2009-12 RZR-S/ RZR-4 800 Header
2011-12 Standard RZR 800
Header
6300-6500
6750
open throttle (WOT) as well as
where their REV-Limiters are.
2011-12 RZR 900 XP
Header
8000-8400
8750
19
SLP MTX™ Clutch Weights
for Polaris
800 RZR except 900 XP
SLP's MTX™ Clutch Weights harness the horsepower of your RZR, RZR-S and
RZR-4 by transferring it more efficiently to the wheels. Their unique heavy heel and
special weight profile provide substantially greater shift force, delivering improved
acceleration and top speed. Other benefits include smoother engagement and very
responsive back shift. Adjustable by adding weight via rivets (up to 6 grams per
weight), this weight offers precise tuning ability for your application.
RePLACeMenT TUninG RiVeTS,
Please inquire for recommendations. Sold per set of 3 including
PACkAGe oF 6
tuning rivets (6 - 1 gram, 6 - 2 gram and 6 - 3 gram rivets).
PART #
MATeRiAL WeiGHT PRiCe/SeT
PRiCe/SeT
PART #
WeiGHT
40-90
aluminum 1 gram
9.95
104.95
40-129
62 gram
40-91
steel
2 gram
9.95
40-130
65 gram
104.95
40-92
steel
3 gram
9.95
2008-09 Standard RZR requires reshimming.
Rivet Set/Removal tool see page 23.
Rooster Adjustable Shift Weights
for Polaris 900 RZR and 900 RZR-4
Get the HP to the ground on your RZR XP 900 with our adjustable Rooster
Weights! They allow you to add the included bolts and washers to the
weights at three different positions, the heel, center, and tip of the weight, to
fine-tune your clutching. They are adjustable from 50 to 70 grams with included bolts and washers. This kit utilizes two different thicknesses of washers and three different weights of bolts for the ultimate in adjustability.
Inquire for recommendation.
PART # DeSCRiPTion
40-131 Rooster Adjustable Shift Weights (50-70 grams)
20
PRiCe
199.00
Drive Spring for Polaris 570/800/900 RZR
These high quality clutch springs are offered in a variety of spring rates to allow
you to optimize the shift characteristics of your drive clutch. Things such as elevation and tire size can have a dramatic effect on the performance of your RZR.
Ask a representative for more information regarding your specific application.
Part #
Color
40-404
40-400
40-401
40-402
40-403
Red
Red
Red
Red
Red
Stripe Color Compression Rate- Pounds
@2.25”
@1.25”
Gold
25
175
Gold/Black
55
225
White/Black
65
245
Green/Black
75
260
Gold/Silver
105
260
Price/ea.
24.95
24.95
24.95
24.95
24.95
Driven Spring for Polaris 570/800/900 RZR
This high quality clutch spring allows you to optimize the shift characteristics
of your driven clutch. Things such as elevation and tire size can have dramatic effect on the performance of your RZR. Ask a representative for more
information regarding your specific application.
Part #
40-420
40-421
Color
Compression Rate- Pounds
@2.05”
@1.05”
Red
105
165
Lime Green/ Silver
125
190
Price/ea.
24.95
24.95
21
SLP Clutch Press Tool
SLP Clutch Press Tool has been widely accepted as the most efficient clutch
compression tool available. This revolutionary drive and driven clutch servicing tool is designed specifically for compressing and holding springs for ease
of assembly and disassembly. These tools are specified in many factory repair manuals as a required specialty tool for clutch compression. Wrestling
with the clutch or need for a second person to help is now history. Made
compact, the SLP tool can be used for field testing or production clutch repair on the shop bench. High quality metal construction with powder coated finish provides a quality, functional tool
that is extremely durable. This design incorPART # DeSCRiPTion
PRiCe/eA.
porates adjustable stand-offs that can be
20-204 Polaris Drive/Driven Clutches (Including ATV,
99.95
moved in and out to allow proper fit for many
P2, TEAM Rapid Reaction and Tied Clutches)
different clutches.
Drive Clutch Spider Tool for All Polaris 800/900 RZR
This Spider Tool allows the spider assembly in the drive clutch to be removed and
assembled in order to service the rollers and buttons. It is made of high quality steel
to precise specifications, allowing you to remove or install
PART #
PRiCe/eA.
even the most stubborn spiders easily.
20-75
47.95
Drive Clutch Spider nut Tool for Polaris 900 XP
This spider nut tool was specifically designed to remove the
jam nut that locks the spider into place on the XP 900.
22
PART #
20-214
PRiCe/eA.
TBA
Not Actual
Picture
Cam Arm Bushing Replacement Tool
Replace worn MTX™ clutch weight bushings to maintain best performance.
Reduce wear on weights and rollers due to worn bushings.
PART #
20-1
40-28
40-200
DeSCRiPTion
Bushing Tool
Replacement Bushing/ ea.
Replacement Bushings, 3 pack
PRiCe/eA.
6.95
5.25
15.00
MTX™ Rivet Set/Removal Tool
This tool allows you to fine tune your MTX™ Weights quickly and easily by
setting or removing rivets. Specifically designed to be used in the field (but
can be clamped in a vise for shop use) it is compact and lightweight, yet
robust enough to be used time and time again.
PART #
20-155
PRiCe/eA.
52.95
Drive Clutch Pullers for Polaris 570/800/900 RZR
These clutch pullers are designed to pull even the toughest of
clutches. Made of high quality heat treated material, these tools
are built to last.
PART #
20-207
20-136
DeSCRiPTion
570 RZR and 800 RZR, RZR-S and RZR-4
XP 900 RZR and RZR-4
PRiCe/eA.
28.95
36.95
#20-207
#20-136
23
Sheave Clamp Tool for Polaris 800/900 RZR
The sheave clamp tool holds the moveable sheave of the drive clutch
in place when collapsed for changing clutch weights without removing
outer cover or clutch from crankshaft. An
PART #
PRiCe/eA.
absolute must for field tuning.
20-161
7.95
Drive Clutch Holding Fixture
for
Polaris 800/900 RZR
This Drive Clutch Holding Fixture can be bolted to a bench or clamped in a vise for
solid holding of drive clutch for spider removal when shimming for belt-to-sheave
clearance or servicing the spider. It contacts all clutch webs for maximum support to
eliminate clutch web damage. Features a quick spin thumb nut with knurled edge for
superior grip and center hold down for much greater
PART #
PRiCe/kiT
holding stability while applying off center torque.
20-162
79.95
Clutch Holding Tool
This premium tool offers the proper method to hold the
drive clutch from rotating while removing or torquing
clutch center bolt or when using a clutch puller. Unlike
other clutch holding tools that are laser cut, this tool
won’t hardmark or damage clutch, making it a far superior tool. It also features a cushion grip for
PART # DeSCRiPTion
comfort. This tool is a must for quick and
20-202 Polaris RZR
easy clutch removal.
24
Will not hard mark
clutch like
other tools.
PRiCe/eA.
34.95
Tool Bag
Handy roll-up style bag holds enough tools for trail riding or racing, and
includes a zipper pouch for small tools.
PART #
46-52
extension Spring Hooks
Special tool made for installing and removing all
exhaust system springs or any spring that requires a
pull to release. Made of stainless steel for
strength and rust resistance.
PRiCe/eA.
19.95
SiZe
4”
6”
8”
12”
PART #
20-89
20-90
20-183
20-210
Tools not included
PRiCe/eA.
10.95
11.50
11.95
12.95
Miniature Water Temperature Gauge
Monitor water temperature easily with these new miniature
gauges. The gauge can be set to read in either Fahrenheit or Celsius. It
registers the current temperature and records maximum temperature. The
display can be mounted either with its Peel-N-Stick backing or bolted on.
Come standards with either a ¾”
PART # DeSCRiPTion
or 1” hose splice adapter.
19-103 3/4” (19mm) Hose I.D. Size
19-104 1” (25mm) Hose I.D. Size
Polaris RZR uses 1” hose
PRiCe/eA.
44.95
44.95
25
SLP Team Hat
This attractive newly designed hat features a 3D embroidered
SLP logo on the front of the hat with EST. 1972 on the brim. Adjustable rear
closure for one size fits most.
This new hat was specifically designed with the hot summer
months in mind. It utilizes a lightweight breathable fabric shell
with a moisture wicking band to provide maximum comfort even
on the hottest days. Adjustable rear closure for one size fits
most.
PART #
60-59
60-58
DeSCRiPTion
Black
Summer Grey
PRiCe/eA.
21.95
24.95
SLP Team Beanie
For those cold days try one of our SLP Beanies. This
newly designed beanie features a woven logo with embroidered lettering for a great new look. Lined with Thinsulate™ insulation to keep
your head and ears warm and comfortable. One size fits most.
PART #
60-49
26
PRiCe/eA.
19.95
# 60-55
# 60-57
SLP Decals
Our SLP Logo is on high quality 3M Transfer material
which is great for your RZR, truck or trailer.
PART #
60-41
60-12
60-55
60-8
60-9
60-57
DeSCRiPTion
2-1/4” x 1-1/4” Logo, per each
7” x 3” Logo, per each
7 1/2” x 3 1/2” Oval Logo
11 1/2” x 4” Logo, per each
18” x 9 1/2” Logo, per each
39” x 18” Oval Logo
PRiCe/eA.
.22
.95
.95
3.00
7.29
25.95
# 60-12
# 60-8
# 60-9
inDeX
Autotune...........................15
Beanie..............................26
Brake Pedal Covers.........10
Bumper, Front....................7
Bumper, Rear.....................9
Bushing Tool, Cam Arms..23
Clutch Holding Fixture......24
Clutch Holding Tool..........24
Clutch Kits...................18-19
Clutch Press Tool.............22
Clutch Pullers...................23
Clutch Spider Tools..........22
Clutch Vents.....................16
Decals..............................27
Doors.................................3
D-ring................................11
Drive Spring......................21
Driven Spring....................21
Front Bumper Support........8
Front Skid Plate..................8
Gas Tank Armor................14
Gauges........................15,25
Glove Box.........................10
Grab Handle.....................16
Half Doors..........................3
Hat....................................26
Helix.................................17
Hood Grill.........................12
Hood Hold Down..............12
Large Tire Clutch Kit....18-19
LCD Display......................15
Lower Radiator Vent.........12
MTX Rivet Removal Tool..23
MTX Weights....................20
Mud Guard.......................14
Muffler 800.........................5
Muffler 900.........................6
PCV..................................15
Power Commander...........15
Radiator Support................8
Radiator Vent Kit..............12
Rear Bumper Kit.................9
Rocker Armor......................4
Rooster Weights...............20
Sand Clutch Kit...........18-19
Secure Storage Box.........10
Sheave Clamp Tool..........24
Silencer 800.......................5
Silencer 900.......................6
Spring Hook Tool..............25
Stickers.............................27
Stinger..............................11
Super Silent Muffler............5
Team Tied Driven Clutch..17
Tool Bag...........................25
Trail Clutch Kit.............18-19
Trailing Arm Guards...........9
Water Temp Gauge Mini...25
Wheel Spacer Kit..............13
Wide Band 2.....................15
27
Change Service Requested
743 E. Iona Rd. Idaho Falls, ID 83401
(208)529-0244, www.startinglineproducts.com
PRSRT STD
U.S. POSTAGE
PAID
PERMIT NO. 96
IDAHO FALLS, ID
For more information about these products
or to place an order, please contact:
Starting Line Products (208)529-0244
www.startinglineproducts.com
Scan this code with your smart
phone and you will be directed to
the UTV section of our website.