Automatic Wash
& Dry Toilet (Bidet)
Warranty Period:
One (1) Year
BIDET USER MANUAL
Distributor Contact Phone No.
Purchase Date
Date:
, Month:
, Year:
If the purpose of general product is converted into business, warranty period decreases by half.
Classification
Trouble in
performance
or function
during normal
use within
warranty
period for
parts
Consumer Damage Type
Within Warranty Period After Warranty Period
Important repair is required within
10 days after purchase
Product Exchange or
Refund of Purchase Price N/A (Non-Applicable)
Important repair is required within 1
month after purchase
Damage generated during product
transport and product installation
when purchase is made
Product Exchange or
Free-of-Charge Repair
N/A (Non-Applicable)
Product Exchange
(Installer is responsible
for transport)
N/A (Non-Applicable)
Important repair is required within 1
month after exchange
Refund of Purchase Price N/A (Non-Applicable)
No exchange is possible
Refund of Purchase Price N/A (Non-Applicable)
The third occurrence of trouble by the
same flaw
Product Exchange or
Charged Repair
Refund of Purchase Price
The fifth occurrence of trouble by
different flaws
Product Exchange or
Charged Repair
Refund of Purchase Price
Refund of the amount
The company lost the product requested Product Exchange or
calculated by straight
for repair by consumer
Refund of Purchase Price line depreciation
Repair is impossible due to no repair
parts available during the warranty
period for the parts
Refund of the amount
Product Exchange or
calculated by straight
Refund of Purchase Price line depreciation
Repair is impossible
Exchange of product after
charging the amount
corresponding to repair cost
Product exchange with
application of depreciation
after receipt of repair cost
Repair is impossible
Charged Repair
Charged Repair
Charged Repair
Charged Repair
Trouble by consumer's fault
Trouble by consumer's careless handling and incorrect repair
-Trouble by wrong use of gas type, gas pressure, and electricity
capacity
-Trouble or damage by outside shock or drop
-Trouble by using consumables or option products, which are not
designated by our company
-Trouble by no observance of "cautions" in user manual
Charged Repair
Charged Repair
Other cases
• Trouble by natural disaster (lighting, fire, damage from sea water,
and flood damage)
• Life of consumable parts ends
Charged Repair
Charged Repair
Trouble by
consumer's
intention or
mistake
No product trouble like device cleaning, adjustment, user manual and
installation:
Simple adjustment with user manual and without assembling
External environment trouble like internet, antenna, and wired signal
Initial installation on product and reinstallation due to poor installation
by sales shop
Problems by installation change due to product transfer or move
Cleaning of product inside, dust and head, and removal of alien
substance
Trouble by other products including software)
Please read this User’s Manual carefully for proper operation and maintenance
and keep this manual well together with the warranty.
USER MANUAL
PRODUCT WARRANTY
Dear Customers
First of all, we would like to thank you very much for purchasing
this Ionia Bidet.
This product is superior to the ones in the past in function and we
believe that it will provide you with clean and healthy bidet.
We would like to recommend you to read this User’s Manual
carefully for proper operation and maintenance and keep this manual
well together with the warranty.
TABLE OF CONTENTS
Name of Component
02
Safety Precaution
05
Please Prepare Prior To Use
08
How to Use
10
It would be of help if you know !!!
16
How To Repair
18
In Case of No Use over a Long Period
24
Prior to Request for Repair
25
Installation Manual
26
Product Specifications
37
In Case of Service Request
38
1
Name of Component
It is convenient to know the name of each component of bidet.
IB-3000
Stop Button
It stops cleaning
bidet dry movement.
Cleaning/Move Button
It is used for
cleaning.
Water Tank
Bidet/Move Button
Seat Cover
It is used for bidet
cleaning.
Water supply hose
Power Plug
Deodorizer
(only IB-3000)
Cleaning Indicator Lamp
Lamp is on during
cleaning.
Stop
Cleaning
/Move
Lamp is on while
bidet is on use.
Dry Button
It dries moisture with
warm air after
cleaning.
Dry Temperature/Water Pressure
Control Indicator Lamp
Bidet/M
ove
DRY
Nozzle(bidet)
Nozzle(cleaning)
Pre-Filter
It controls warm water
temperature.
Seat Button
Seat body
Water Shutoff Valve
It controls seat
temperature.
Deodorizer Button
Control Panel
Toilet
LOW
HIGH
Dry/Wate
r Pressu
re
Warm Water Control Button
Touch Sensor
Automatic Indicator Lamp
Lamp is on while
automatic function
is on use.
Front·Rear Control Button
It controls position of
cleaning and bidet.
It is ON/OFF switch
of deodorizer.
REAR
FRONT
Nozzle
Power Saving Button
It is ON/OFF switch
of power saving function.
Power Button
It is ON/OFF
switch of power.
M
Warm
Water
H
L
SEAT
TEMP
DEODOR
POWER
SAVING
M
Automatic Button
Press for automatic function use.
Cleaning and dry function works
automatically.
Strong/Weak Control Button
Use for strong and weak control
on cleaning, bidet water pressure
and dry temperature.
H
L
Warm Water Temperature Indicator Lamp
Lamp is on while
warm water is used.
Seat Temperature Indicator Lamp
Power
Water supply hose
Dry Indicator Lamp
Lamp is on during
dry movement.
FULL
AUTO
It displays dry temperature and
water pressure control.
Connector
Bidet Indicator Lamp
IB-3000
Lamp is on during seat
temperature control.
Deodorizer Indicator Lamp
Lamp is on while
deodorizer works.
Power Saving Lamp
Lamp is on while
power saving function
works.
2
3
Safety Precaution
Name of Component
IB-1000
In order to prevent safety accident caused by incorrect use and to use products conveniently, the precautions
are shown as various picture symbols. Read the manual after fully understanding the following symbols and
their meanings;
Stop Button
Cleaning/Move Button
It is used for
cleaning.
Bidet/Move Button
It is used for bidet
cleaning.
Lamp is on during
cleaning.
Stop
Cleaning
/Move
Bidet Indicator Lamp
Lamp is on while
bidet is on use.
Water Pressure Indicator Lamp
Bidet/M
ove
Strong/Weak Control Button
Use for strong and weak control
on cleaning, bidet water pressure
and dry temperature.
Front·Rear Control Button
It controls position of
cleaning and bidet.
It controls seat
temperature.
REAR
Lamp is on while
warm water is used.
FRONT
M
Warm
Water
H
L
SEAT
TEMP
M
Seat Temperature Indicator Lamp
Lamp is on during seat
temperature control.
H
Lamp is on while
power saving function
works.
Each symbol indicator has the following meaning:
"Do not try. ( It is a general prohibition symbol)
"Do not touch"
Keep any flammable materials away from this product.
Be sure to carry out instruction (It is a symbol indicating general action.)
Power Display Lamp
4
* Wound : It refers to abrasion, burn (high, low temperature) and electric shock, which do not require
hospitalization or being long-term outpatient for treatment.
* Property Damage : It refers to the damages, which are expanded to housing, building, household items,
livestock, and covers.
Do not touch with wet hands.
L
It is ON/OFF switch
of power saving function.
It is ON/OFF
switch of power.
Indicates a hazardous situation, which, if ignored and used incorrectly, which may
result in injury or property damage.
POWER
SAVING
Power Saving Lamp
Power Button
Caution
"Do not assemble"
Nozzle
Power
Power Saving Button
Indicates a hazardous situation, which, if ignored and used incorrectly, which could
result in serious injury.
Warm Water Temperature Indicator Lamp
HIGH
Water P
ressure
Seat Button
Warning
"Be Cautious!" It is the symbol requiring precaution like "caution" "warning."
Be sure to read and observe precaution.
LOW
It controls warm water
temperature.
Indicates a hazardous situation, which, if ignored and used incorrectly, which will result
in death or serious injury.
Cleaning Indicator Lamp
It displays water pressure
during water pressure control.
Warm Water Control Button
Danger
It stops cleaning
bidet dry movement.
Plug out power cord.
If power is ON,
lamp is turned on.
Connect grounding wire.
5
Safety Precaution
CAUTION
WARNING
Do not lean against toilet cover.
* Toilet cover may be broken, which causes
falling down or getting hurt.
Do not step on or apply shock.
* You may get hurt by falling down.
Prevent from freezing.
* Once it is frozen, main unit is damaged, which
may cause water leakage. Do not install at
freezing environment.
* It may cause electric shock or injury.
When sterilization & purification filter is pulled out,
be sure to close water supply valve.
* If water supply value is not closed completely,
it may cause water leakage.
Do not strain water hose to connection pipe
by force.
* Pipe shaking may cause water leak.
Do not obstruct warm air or deodorizer outlet.
* It may cause fire, trouble or noise.
Be cautious not to have fingers caught in toilet
lid or during opening and closing of toilet
* If fingers are caught, they may get hurt.
Do not urinate on the nozzle.
* It may cause odor or trouble.
Do not use if main unit or toilet is damaged.
* It may cause electric shock or injury.
For outside repair, plug out power cord from
the outlet.
* Otherwise, it may cause electric shock.
Caution in Use.
When the following people use the product, guardian should be cautious not to have them fall down when
they sit on or rise from toilet:
children, the old and the infirm, and people who can not sit on or rise from toilet.
When people rise from toilet, if they repeat the motion like leaning forward while they sit on, it may cause
injury as main unit is fallen off from main unit fixing plate.
Be sure to grab main unit when it is lifted and
moved.
* If toilet or toilet lid is lifted, it may cause
separation from main unit or injury.
6
Be sure to completely turn off sterilization &
purification filter, if it was pulled out before.
* It is not closed completely, it may cause
water leak.
If power cord is damaged, replace cord for prevention from any danger by contacting
manufacturer or service center, or by number.
7
Please Prepare Prior To Use
Be sure to check the following items before bidet is used:
1
Check whether water supply
shutoff valve is open.
3
If water supply shutoff valve is closed, open it
by turning to the left. In case of being opened,
be sure to bring it back to the original position
as it is adjusted.
Check cleaning.
1.Detect by placing hand on the part where
toilet seat sticker is attached.
2.Press cleaning button.
3.If nozzle comes out, block water by
covering its end with hand.
Water supply
shutoff valve
2
Connect power plug to outlet.
1.Insert power plug in AC 230V or 120V outlet.
(Use outlet with grounded outlet box.)
230V
or 120V
2.Check whether cleaning and bidet lamp are
turned on at control panel.
If power plug is inserted, cleaning and bidet
lamp flickers. If cleaning or bidet button is
pressed, water entering begins. Once water
entering ends, flickering of cleaning and
bidet lamp automatically disappears.
If lamp is not turned on, connect power
plug again.
Warning
8
H
L
H
M
M
t
TemSea
perature
L
Bidet/M
ove
Cleaning
/Move
Turn on
Connect grounding completely.
★ In case of trouble or electric leakage,
it may cause electric shock.
★ In case of outlet with no grounded
box, install after consultation with
specialized equipment shop.
4.To stop cleaning, push stop button.
Check other functions after reading user
manual.
★ It has a built-in touch sensor, which
detects seated person. Cleaning, bidet,
deodorizing, and drying do not operate
unless person is seated.
9
How to Use
1 Press cleaning button
POWER
SAVING
DEODO
R
SEAT
TEMP
WARM
WATER
POWER
IB-300
0
REAR
STOP
(How To Adjust Temperature)
FRONT
Warm water from nozzle does bidet cleaning
(female exclusive use)
Warm water from nozzle does general cleaning.
IB-3000
■ Seat
1 Press bidet button
HIGH
★ Water does not get warm instantly. If button is
pressed 10 ~ 15 minutes before used, it can
be used pleasantly.
★ Whenever button is pressed, indicator is
converted into "OFF", "LOW", "MEDIUM"
or "HIGH."
■ Bidet (female exclusive use)
LOW
Whenever button is pressed, indicator lamp
is converted. Set desired temperature.
■ Cleaning
DRY/W
ATER P
RESSU
RE
POWER
POWER
SAVING
DEODOR
SEAT
TEMP
Water temperature is adjusted with
warm water button.
Model : IB-3000
FULL
AUTO
H
L
M
H
L
M
WARM
WATER
Nozzle
REAR
FRONT
After connecting power plug, check whether 'Low' lamp
of warm water and seat button is turned on.
★ In case that no lighting is maintained, connect power
plug again. Once 'Low' lamp of warm water and seat
button is on, product stands ready to operate.
(How To Adjust Temperature)
DRY
■ Warm Water
BIDET/M
OVE
■ Power Connection
■ Simple Operation
Operation is simple!!!
CLEANIN
G/MOV
E
Please Prepare Prior To Use!!!
If bidet is adjusted as follows prior to use, it may be used more pleasantly.
Adjust seat temperature with seat button.
Whenever button is pressed, indicator lamp
is converted. Set desired temperature.
★ Seat does not get warm instantly. If button
is pressed 10 ~ 15 minutes before used, it
can be used pleasantly.
★ Whenever button is pressed, indicator is
converted into "OFF", "LOW", "MEDIUM"
or "HIGH."
3
Press stop button to stop.
water pressure button for
2 Press
adjustment of cleaning strength.
★ It has a built-in self-stop function for automatic
stop of general cleaning and bidet cleaning
one minute later respectively.
Warning
In case that the following people use the product,
seat button should be set at 'Low' or 'OFF' and close
attention is required by their guardians:
children, elderly people, people who are unable to
adjust temperature by themselves, people with weak
skin, people with sensitive skin, people taking sleeping
pill, and people suffering from heavy drinking or
over work.
★ If used for a long time, it may cause
low-temperature burn.
10
Warning
If cleaning strength is adjusted to low where
tap water pressure is low, nozzle may not
come out. In this case, adjust cleaning
strength to high.
11
How to Use
■ Adjustment of Nozzle Position
Model : IB-1000
■ Cleaning
■ Bidet (female exclusive use)
1 Press cleaning button
Warm water from nozzle does general cleaning.
1 Press bidet button
Press "Front" or "Rear" button at
nozzle location.
Initial Position
Cleaning location can be adjusted to four(4)
levels during general cleaning or bidet cleaning.
Warm water from nozzle does bidet cleaning
(female exclusive use)
Cleaning position is adjustable.
3
Press stop button to stop.
★ It has a built-in self-stop function for automatic
stop of general cleaning and bidet cleaning
one minute later respectively.
water pressure button for
2 Press
adjustment of cleaning strength.
Warning
Unless nozzle moves for cleaning or bidet,
location adjustment function does not work.
★ Reference
Warning
If cleaning strength is adjusted to low where
tap water pressure is low, nozzle may not
come out. In this case, adjust cleaning
strength to high.
12
Nozzle can remember its last used position, which is
automatically set up for next use.
13
How to Use
■ Deodorizing (IB-3000 model only)
■ Drying
1
Press Dry Button
Warm air dries wet spot during cleaning.
2
Press 'High' or 'Low' Button for
change of warm air temperature.
deodorizing while being seated.
1 Start
By pressing "Deodorizer" button while you
sit on the seat, deodorizing function of
ON/OFF can be adjusted manually.
Whenever button is pressed, indicator lamp is
converted. Set desired temperature.
★ While 'Dry' is on use, deodorizing stops
temporarily.
★ Deodorizing cartridge, which absorbs odor from
bidet main unit, is installed.
3
In case that you may wish to convert
"Deodorizer" to 'OFF'
● How To Operate
Once 'Deodorizer' button is pressed, 'Deodorize'
indicator lamp is turned off and no 'Deodorizer'
function works.
If you wish to turn it on, press 'Deodorizer' button.
Deodorizing stops automatically two(2)
minutes later after operation..
★ Caution
Deodorizing function may not work properly under the following cases:
• When 'Deodorizer' filter is contaminated
• Bad odor by foods
• Seven(7) years after replacement
■ Power Saving
Caution
3
Press stop button to stop.
Use with Dry Button at 'Low' for elderly people,
people who are unable to adjust temperature
by themselves, or people with weak skin.
※ Drying at high temperature may cause burn.
★ Reference
Warm air dry function stops three(3) seconds
later after stop button is pressed for product
durability.
★ Reference
If dry button is pressed after wiping out water
with tissue after cleaning, drying can be
made faster.
■ Automatic Function (IB-3000 model only)
1
● Power Saving
1
Press power saving button.
(refer to the below for indicator lamp ON)
Power saving continues till setup is released, and,
while on use, the temperature of warm water and
seat gets back to the previous set up condition
for operation.
IB-3000
★ It is on power saving mode while not
used (indicator lamp is ON).
★ Power saving function stops while on
use (indicator lamp is OFF)
★ In case of power saving, you may feel
chilly due to low temperate of warm
water and seat. In that case, use after
releasing power saving.
Press automatic button
If automatic button is pressed, automatic indicator lamp is turn on and cleaning and drying are made
automatically. All family can use conveniently with automatic function.
14
Power saving is the function to save electricity consumption by lowering temperature of warm water and
seat while it is not used.
IB-1000
2
Press power saving button again for
release (indicator lamp is OFF).
15
It would be of help if you know !!!
Warm water volume and temperature?
• Capacity of warm water tank is 0.85 L.
it can be used continuously at a certain
temperature or higher by
adopting continuous warm water type.
Touch sensor is installed.
Touch sensor is installed to prevent water gushing
by pressing button by mistake when you do not
sit on seat. Therefore, if you do not sit on seat,
each function including cleaning, bidet,
deodorizing and drying does not operate.
• Control temperature inside warm water tank
- Low: about 32℃
- Medium: about 36℃
- High: about 40℃
When nozzle does not come out in case
that water pressure adjustment button is
at "weak"
This bidet is structured to gush water by pushing
out nozzle by water pressure. If water pressure
adjustment button is set at "weak," nozzle may
not come out. In this case, adjust water pressure
adjustment button to "strong."
Water comes out from nozzle part after you sit on the seat or
comes out before and after cleaning or bidet operation, which
is designed to maintain cleanness of nozzle, and is not a failure
in nozzle operation.
★ In case of other cases or non-stop running of water, contact
purchase shop after closing water supply shutoff valve and
plugging out power cord.
It may have some smells if it is used for the first
time, which disappears soon after initial use.
Don't worry about this.
★ In case of smell, it generates only once
after installation.
Touch sensor
Slowly closing seat and seat cover
Water comes out from nozzle part?
If you use the product for the first time,
it may have some smells
Soft closing function is
installed for slow closing
to reduce shock when seat
and seat cover are thrown
down by mistake,
★ If you close by straining
too hard, it may cause
trouble.
About energy saving
The following is effective for energy saving:
• Always activate power saving button.
• Adjust seat or warm water temperature
pleasantly, but not too high.
• Set the temperature, which fits in with four
seasons
• Turn the power off while you are out for
long time.
★ In case of concern on damage by winter
freezing, refer to how to prevent winter freezing.
In case of static at radio or TV
If radio or TV is placed closer to bidet, it may cause static.
In this case, use radio or TV by relocating it to a place with
no generation of static.
16
17
How To Repair
■ Normal Repair
Caution
When repair is done, be sure to check whether power lamp at main body operation
panel is off by pressing power button.
Warning
Warning
Do not pour water or detergent into main unit.
Do not spray water or detergent on main unit or
power plug part.
★ It may cause electric shock or fire.
Do not use detergent for bathroom, household
detergent, bleaching agent, benzene, sinner, or
cresol for repair of plastic parts.
★ Broken resin may cause injury,
electric shock or fire.
★ Clean with water-soaked soft cloth.
Repair Method of Seat Main Body
SINNER
※ Seat cover can be separated from the product
easily. Also, since seat main unit can be
separated from toilet, the gap between toilet
and seat main unit can be cleaned well.
BENZENE
● Wipe with soft cloth soaked with water.
If dirtiness is left untouched, it does not wipe
well. Thus, wipe well frequently. If it is wiped
with water-soaked cloth, it prevents static
electricity. Static electricity, which attracts
dust, may cause dirtiness.
How To Repair Nozzle
● Take out the nozzle and if its hole
for water gushing is dirty, clean
with tooth brush.
★ Do not strain or bend nozzle
by force.
About Antibiotic Nozzle
• Antibiotic resin is applied to nozzle part.
Abut Antibiotic Product
Warning
Remove dust on power plug regularly.
When dust is removed, plug out power
cord and remove dust with dry cloth.
★ Insulation defect many cause fire.
18
• Antibiotic product has the effect of restraining
propagation of bacteria, but antibiotic effect does
not work well in case of dust or oil is covered with
surface.
• Antibiotic product has the effect of restraining
propagation of bacteria on the surface of the
product, but can not remove bacteria completely.
Therefore, it can not prevent from infection.
19
How To Repair
■ Remove Seat Lid and Clean
■ How To Detach Main Unit
★ It is convenient if you wish to clean every corner.
How To Assemble Seat Lid
Caution
Be sure to check whether power lamp at control panel of main unit is turned off by pressing power button.
1. Plug out power cord from the outlet.
2. Close the water supply shutoff valve for no
water supply.
How To Detach Seat Lid
1. Detach seat lid from main unit hole by grabbing
left corner and stretching outward while lifting
lid slightly.
2. Separate the lid from main unit by pressing seat
lid to the right.
Caution: If you try to detach by force, it may
cause damage including breaking.
Seat Lid
Pressing
stretching
3. Separate main unit from fixing plate to the arrow
direction by pressing attach/detach button.
4. Place main unit on the toilet lightly.
Caution
Do not use the seat with the lid being detached.
★ If you use the product with the detached seat lid, it may cause damage.
How To Assemble Seat Lid
1. Insert seat lid in main unit by fixing into the
right pin at main unit.
Pin Hole
2. Assemble the seat lid by stretching the left
corner of the lid outward and fixing into main
unit hole.
Caution
1. Be sure to plug out power cord from
the outlet.
※ If there is no water at warm water tank,
it may cause smoke or fire.
※ Be careful not to drop into the toilet.
2. Do not strain cords or main supply
water hose.
※ It may cause damage or leakage.
3. When you detach main unit or clean it,
handle with care.
※ Otherwise, it may cause leakage or
break down.
4. Never tilt or turn over main unit with
power on
※ It is the cause of malfunction.
Seat Lid
● Do not put it on the floor.
● Do not have it lean against.
Inserting
● Do not tilt main unit.
● Do not turn main unit upside
down.
● Do not strain.
Pin
※ Water supply between T-shaped connector and main unit is connected by the connector,
not by main unit, you can not detach and clean main unit.
20
21
How To Repair
■ Cleaning by Detaching Whole Main Unit
(How To Attach/Detach Main Unit Slide)
General Cleaning Method
Toilet Cleaning
■ You can clean easily by separating main unit.
After cleaning is over, fix with attach/detach
button after attaching main unit.
Opening
1. Separate main unit from fixing plate to the arrow
direction by pressing attach/detach button.
1. Wash out after wringing out water-soaked soft
cloth enough.
2. Wipe toilet clean with water-soaked soft cloth.
2. Wash stains on dirty part by soaking soft cloth
with household neutral detergent and then wipe
out with soft cloth.
3. Insert main unit into fixing plate to the reverse
direction from separation.
• Do not use the detergent containing cleanser
or abradant because it may generate scratch on
main unit case or toilet seat.
Locking
※ Do not use acid or alkali detergent as it corrodes
metal part inside main unit.
Caution
■ Caution in Toilet Cleaning
When main unit is separated, separate while
pressing attach/detach button of fixing plate.
Otherwise, it may cause malfunction or damage.
• When you wipe toilet, bathroom detergent may
damage to main unit by volatile gas.
Clean within a short period of time.
• Do not have main unit stained with bathroom
detergent.
Caution
Main Unit Cleaning
■ Wipe with soft sponge or cloth soaked with a neutral detergent.
• Do not use hydrochloric acid detergent or benzene.
(It may cause change in shape or color of main unit.)
• First of all, plug out power cord.
- There is a danger of electric shock.
Plug out power cord.
Do not have main unit
and plug stained with
water and detergent.
It may cause electric
shock or fire.
Nozzle Cleaning
※ Notice
Wipe water-soaked toilet and tank frequently.
• Condensing water generated during rainy season
or by heating in winter becomes cause of mold
by getting floor or wall wet if it is left untouched.
Wipe it out or ventilate.
Replacement Parts
■ Brush nozzle gently with soft brush.
• Be careful not to get nozzle hole damaged.
• Do not brush with tough scrubber.
• Lift up seat lid and seat.
• Clean by pulling the end part of cleaning or bidet nozzle forward
Water
Purification
Filter
22
Prohibition of
Water Spray
1. Replace water sterilization & purification filter periodically to maintain
performance.
• This filter is composed of three(3) steps of micro filter, sterilization resin and ion
exchange resin. It removes foreign substances and floating matters under water
and finally, sterilizes marine microbes (bacteria, fungi, algae and etc.) with
sterilization resin.
• Filter life varies depending upon water quality, water pressure and amount used,
and the recommended replacement cycle of this filter is 5 ~ 6 months.
• Purchase water purification filter for replacement or other
consumables from our company-designed serve centers.
23
In Case of No Use over a Long Period
Prior to Request for Repair
Be sure to drain water for the following cases:
• When bidet is not used over a long period including travel. ( Water
gets dirt, which may cause clogging.)
• When bidet is not used at vacation home. ( As temperature decreases faster than expected at housing
with no people, it may cause freezing or leakage.)
■ If you think the product is in trouble, check the following items prior to request for repair
because you can fix it easily:
Trouble
Water Drainage and Power Shutoff
1. Stop water supply by closing water supply
shutoff valve.
★ Since water supply shutoff valve is adjusted,
remember the original position
(how much turned).
2. Drain water from warm water tank by pulling out
drain cork of warm water tank.
★ Fasten drain cork after draining water completely.
Power lamp is Off
3. Separate water hose to main unit.
① Drain water completely by lifting main unit
water hose.
② Assemble water hose again after water drainage.
• Is temperature adjustment switch OFF?
Adjust to proper temperature by pressing
adjustment button of toilet seat
temperature or warm water temperature.
Cleaning water does
not come out well.
• Is water supply valve open completely?
Open all by turning water supply valve axle
to the opening direction.
• Is nozzle stained with slime or foreign
substance?
Clean nozzle with soft brush.
• Is water sterilization & purification filter
clogged?
Stop water supply and replace water
sterilization & purification filter
(about 5 ~ 6 months)
• Is it the area with low water pressure?
Check water pressure.
Pull out drain cork of
warm water tank by turning with driver.
4. Be sure to conduct a test run if used again.
Main Unit
Water Hose
■ If no water comes out due to freezing
If no water gushes out due to freezing of main unit supply hose or water supply connector,
defrost slowly by getting main unit supply hose or water supply connector warm with warm
water-soaked cloth or defrost naturally by warming up inside.
Caution
Do not apply hot water or hot air to main unit water hose.
★ It may cause damage to main unit water hose.
24
• Is power switch off?
Have power switch ON.
• Is power plug plugged in completely?
Plug in power plug.
Seat cover is cold.
Cleaning water is cold.
Water Supply
Shutoff Valve
Close
Check Point, Cause and Action
Water leaks outside
continuously
• Is connecting part of water supply valve
fastened tightly?
Fasten again connecting part of water
supply valve
• Is rubber packing at each connecting part
missing ?
If rubber packing is missing, insert and
fastening it again.
• Is water purification filter clogged?
Replace water purification filter by stopping
water supply.
※ Contact sales store for the following cases:
• Power lamp, power saving lamp and deodorizing lamp of main unit flicker
( It indicates abnormal function with operation of product's self-diagnosis function)
• Warm air does not come out from warm air dry outlet.
• Power lamp is not turned on although power plug is plugged in the outlet.
25
Installation Manual
■ Observe for Safety!
Caution
This is the caution for prevent accident on use by installing bidet safely.
Read the manual prior to installation and install well so that no accident occurs.
Do not damage, destroy, process, bend by force, strain, twist, bind, insert in groove,
put on heavy stuff on power cord.
■ Terminology Explanation
Warning -> It indicates that mishandling could cause death or severe
injury to user.
※ Damage to power cord may cause electric shock or fire.
Do not use except for AC 230V or 120V
※ It may cause electric shock or fire.
Caution -> It indicates that mishandling could cause minor injury or
material damage to user.
If filter is detached, be sure to close supply water shutoff valve. Also, when filter is
installed, fasten tightly with no gap.
※ Filter part may cause water leak.
Warning
Fasten water supply pipe tightly.
※ If you do not fasten screws, it may cause water leak.
Never dissemble, repair or remodel except for qualified technician.
※ It may cause electric shock or fire and get hurt by abnormal
operation.
Be sure to adjust water supply shutoff valve and check water leak after installation.
※ it may cause property damage by water leak.
Do not pour water or detergent into main unit.
Do not have main unit or power plug part stained in water.
※ There may be concern on electric shock or fire.
Drain water in case of a concern on freezing till you sell to customer.
※ Water leak by freezing breakage may cause property damage.
Be sure to install the earthing.
※ There may be concern on break down or electric shock by
leakage of electricity.
※ If there is no ground terminal on the outlet, consult professional technician.
Do not connect power until installation is complete.
※ Damage may cause water leak.
When damaged power plug is plugged in the outlet, do not use in case of getting loose.
※ It may cause electric shock or fire.
Do not connect to water service except for tap water.
Preparation Tool
Monkey wrench (adjustable up to 24 mm) or spanner More than 24 mm.
※ It may cause bladder infection, dermatitis and electric shock or fire
by corrosion of machinery inside.
More than 24 mm
Driver
24 mm
Do not plug out or in with wet hand.
※ it may cause electric shock.
26
27
Installation Manual
■ Power and Water Supply Check
Check Parts (Check Packing Contents)
■ about Power Outlet
Bidet Main Unit
• Use the outlet, which is suitable to AC 230V or 120V and maximum rating 600W
• The length of power cord is 1.3 m.
• Install the outlet at a place, which is higher than the floor and keeps
water out of reach, within the scope of power cord.
• Be sure to do earth connection (the third class earth connection).
※ In case that the outlet is newly installed or changed, be sure to
consult electric installation shop with the care of the above things.
※ Do not plug in power plug to the power outlet until installation is
complete. There is a concern on breakdown.
Fixing Volt
Moving Plate
T-Shaped
Connector
Fixing Plate
Rubber Nut
Main Unit Water
Supply Hose
(Length 50cm)
■ Water To Use ?
Packing
(black: width 2 mm)
• Be sure to connect water supply to water service.
If you use gray water, industrial water or underground water, durability
of electric parts or machinery parts worsens and it may cause accident.
Also, it may cause bladder infection, dermatitis and electric shock or fire by corrosion of
machinery inside.
• Use water supply pressure at 0.07MPa{0.7kgf/cm2}~0.075MPa{7.5kgf/cm2}.
In case of other ranges, contact purchase shop for consultation.
• Connect water supply to water supply shutoff valve at toilet.
In case of installing flash valve toilet, taking water supply separately, or connecting water
supply shutoff valve at toilet to gray water, consult purchase shop.
Fixing Nut
Check Toilet
1. Measure toilet size.
2. Is corner tank-type toilet satisfy ① or ②?
• There are some cases where you can not install
bidet depending upon toilet.
Check measurements shown at the picture below.
13~20cm
More than 39cm
Check Bathroom Inside
• If bidet is installed at toilet, it is shown as the picture
Unit : cm
More
than 3
below.
Check the sufficient space at bathroom inside and
19.6
any obstacle.
48
28.4
53
28
More
than 3
More than 5cm
More than 47cm
In case of corner tank-type
toilet, if it meets the
requirement of either the
picture ① or ②, it can be
installed.
① A: more than 22 cm
② A: more than 13 cm or B: more than 17 cm
If it does not fall under ① or ②, you need to take measure to
move tank location.
(Inquire to purchase shop.)
3. Usability Requirement for Main Unit Water Supply Hose (enclosed)
Although the enclosed main unit water supply hose is 50 cm long,
the proper distance between T-shaped connector and main unit
water supply socket is not longer than 70 cm
(Refer to the picture below)
70cm
29
Installation Manual
Thank you so much for purchasing Ionia bidet.
1 Installation on T-Shaped Connector
• Install correctly after reading this installation manual well.
Caution
Dear
Customers
Dear
Installation
Company
• Be sure to do a test run afte installation.
We ask you to understand that we are not responsible for any trouble in case that the
product is installed by other installation methods than this manual.
Contact purchase store for consultation on product or product installation.
Ionia Co. can install the product, but separate installation fee will be charged.
Be sure to deliver this user manual & warranty to customers.
Installation Diagram
Caution
• Use attached T-shaped connector.
※ Attach T-valve to water supply valve, and connect
water tank and T-valve with tank hose.
T-Valve
Water Shutoff Valve
1. Close water supply shutoff valve.
Explain how to use when they are passed on.
Block water supply by fastening water supply shutoff valve tightly.
※ Since water supply shutoff valve is adjusted, remember the
original position (how much turned).
Water Supply
Shutoff Valve
Close
Name of Each Component
2. Remove existing water supply pipe.
(1) Release the nut at tank, during which a
small amount water flows over.
Put floor cloth underneath.
Tank
Nut
(2) Remove the existing water supply pipe by
releasing the nut on water supply shutoff valve.
water
supply pipe
Release
Release
Caution
• Do not apply excessive force to
water supply shutoff valve or
water supply pipe.
※ It may cause damage and
water leak.
water supply pipe
In case that water supply pipe
is flexible, this work is not
required.
3. Install T-Shaped Connector.
Install T-shaped connector to water supply shutoff valve
by inserting packing (black: width 2mm).
(Tightening torque 100~150 kgf•cm
Note) If the above tightening torque does not fit in,
it may cause damage or leakage.
30
T-shaped
connector
Water supply pipe
connector
Main unit water
supply connector
Water supply
shutoff valve
31
Installation Manual
2 Installation on Main Unit Water Supply Hose (Main Unit Side)
Installation Diagram
3 Installation on Main Unit of Bidet
Disassembly of Existing Toilet Seat
An example of floor water supply type
Seat
Main unit water
supply hose
1. Close water supply valve
connected to toilet water tank.
water
supply
socket
2. Unscrew nut by spanner.
water
supply
hose
Nut
Toilet
3. Remove fixing nut and rubber
packing and disassemble
toilet seat.
Main Unit Attachment
(1) After removing protection cover, connect
main unit water supply hose to water supply
outlet.
Water
supply outlet
(2) Fasten main unit water supply hose tightly by
fitting in with water supply outlet.
Main body
water supply
hose
Main unit water
supply valve
Caution
• Check whether supply hose has packing inside.
Caution
1. Unscrew fixing nut, rubber packing and fixing screw from
mounting bolts.
2. Locate installation base to the position by fitting in with
product size, place it put on toilet and insert moving plate
and mounting bolts.
Attach the bolts to the main unit by fitting in the
Warning groove at the installation base so that they can
not move around.
3. Tighten by using rubber nut and fixed nut.
4. Place the main unit on the toilet.
① This product is adjustable to 130 ~ 200 mm by setting to
toilet seat attach hole.
Caution
② When the main unit is attached, fix with care so that its
location and the center fits in with.
When the main unit is separated,
separate while pressing attach/detach button
of fixing plate(installation base). Otherwise,
it may cause trouble or damage.
• Check to see if it is fixed tightly.
※ No packing or damage on packing may
cause water leak.
32
33
Installation Manual
4 Installation on Main Unit Water Hose (T-shaped Connector side)
(1) Insert water sterilization & purification
filter into T-shaped connector.
T-shaped
connector
Caution
• Check whether water hose has packing
inside.
※ No packing or damage on packing may
cause water leak.
6 Power Connection
1. Plug in power plug to the outlet.
2. Check to see if power is ON.
1. Plug in power plug to the outlet.
2. Check to see if cleaning and bidet lamp at control
panel is ON.
If power plug is plugged in, cleaning . bidet lamp
flickers. If cleaning or bidet button is pressed,
water starts to enter and flickering of cleaning .
bidet lamp disappears. If lamp is not turned on,
connect power plug again.
(2) Fasten filter tightly like the main unit.
Main Unit Water Hose
Caution
If it is not fastened tightly,
it may cause water leak.
Caution
5 Check Water Supply
T-shaped Connector Part
(1) By turning water supply shutoff valve to the right to the
original position, supply water to the tank and the bidet.
Open
• In case that water supply to the
tank stops or is not made, check
to see if float touches with the
wall at tank inside. If so, fix it as
follows:
(1) Make ball tap stand by unscrewing
nut at tank.
(2) Fasten tank nut again by pressing
ball tap by hand.
• Do not pull out the filter with water supply
shutoff valve open.
※ It may cause leakage at filter part.
34
Automatic
Be sure turn on the power after completing
installation with toilet.
■ Test Run ( Once installation is complete, do test run with the following tips)
Water Supply
Socket Part
Caution
Dry
(3) Fasten main unit water hose to filter
tightly.
▶ Be sure to install the grounding.
※ In case of trouble or leakage, it may cause
Warning
electric shock.
※ If the outlet has no grounding box, install
through request to professional installation
shop.
Bidet/M
ove
O-Ring
Cleaning/
Move
LED Lighten
(2) Check any leak at each connecting part by adjusting cleaning
handle of tank.
※ In case of leakage, fasten nuts again and check assembly
status.
1. Check to see if 'low' at warm water and seat is turned on.
2. Check cleaning.
(1) Seat sensor, which detects sitting on the seat, is installed.
Cleaning, bidet and drying does not operate unless you sit on the
seat.
Adjustment is possible by attaching silver tape on the detection
part of the seat sensor or detecting with hands. For location,
refer to the picture at the right.
Cleaning
(2) Press cleaning button.
Since water gushes with this, block with hand so that
it does not splatter around.
As tank is empty at first, it takes 1 ~ 2 minutes for
water to gush. (If you adjust cleaning strengh to
'Strong,' water gushes faster.)
Press stop button when you stop cleaning.
3. Check bidet.
Press bidet button like cleaning.
Water gushes about 25 mm father than cleaning location
as bidet nozzle comes out.
(3) Check whether water is collected and it stops after that.
※ If water is not collected in tank or water does not stop,
check ball tap.
If seat sensor is not detected, each function of cleaning, bidet and dry
does not work.
Caution If that's the case, try again by checking the location of white paper or
cloth.
35
Installation Manual
Stop Button
Use to stop operation
Product Specifications
Strong . Weak Adjustment Button
Use for adjustment of
'strong . weak' of cleaning
and bidet.
Automatic Button
Press for use of automatic
function. cleaning and dry
function works automatically.
Product Name
Seat Button
Model Name
Use for proper adjustment
of seat temperature.
Dry and Warm Water Adjustment Button
Power Button
Use for adjustment of dry and
warm water temperature.
Press this when you want
to do power ON/OFF.
Cleaning . Bidet
Dry
Deodorizer Button
It dries watery part with
warm air after cleaning.
Bidet/Move Button
Front . Rear Adjustment Button
Use for adjustment of the
location oof cleaning &
bidet nozzle
Power Saving Button
Press for ON/OFF of
power saving function.
Deodorizer
Press for feminine wash.
Press when you
deodorize.
Seat
Press for anus cleaning.
Cleaning water is sprayed.
Dry Button
Water Pressure Supply Range
Power Supply
70 ~ 753kpa(0.7 ~ 7.5 kgf/cm²)
Rated Wattage
600W
Dimension
480(W)x530(D)x160(H)
36
Close
5.3 kg
5 kg
Warm Water Tank . Capacity
850 cc
Nozzle
Slide Type Water Pressure
Cleaning Spray Volume
0.5~0.7L/min
Bidet Spray Volume
0.5~0.7L/min
Warm Water Heater Capacity
550W
Warm Water Temperature
4 levels conversion(OFF(normal temperature)/33℃/36.5℃/40℃)
Safety Device
Temperature Fuse, High-Temperature Prevention Device
Capacity
0.4 m³ / minute
Warm Air Heater Capacity
265 W
Warm Air Temperature Adjustment
4 levels conversion(OFF(normal temperature)/38℃/45℃/53℃)
Safety Device
Temperature Fuse, High-Temperature Prevention Device
Heater Capacity
40 W
Surface Temperature
OFF(normal temperature)/LOW(26℃) /MEDIUM(36℃) /High(40℃)
Temperature Adjustment
4 level conversion (Mycom control)
Safety Device
Temperature Fuse
Deodorizing Type
Deodorizing Cartridge Life
Catalyst Deodorizing
Replacement Period about 7 years
Automatic saving by detection on seating
Power Cord
About 1.8 m
Temperature Supply Range
5~40℃
Seating Sensor Function
Other Function
Caution
Be sure to close water supply shutoff valve when you pull out filter.
Also, when you install filter, fasten tightly for no gap.
※ It may cause water leakage ( refer to page 29.)
AC 230V, 50/60 Hz / AC 120V, 50/60 Hz
Automatic Function
In case that water does not come out well when you use water purification filter, replace filter.
Purification
Filter
IB-1000
Direct Connection to Tap Water
Power Saving Function
(1) Close water supply shutoff valve.
Water supply shutoff valve is adjusted, remember the original
location (how much turned)
(2) Pull out the filter at the bottom left of the main unit.
(3) Replace with new filter.
(4) Fasten filter tightly.
(5) Open water supply shutoff valve to the original position.
IB-3000
Water Supply Type
Product Weight
Cleaning/Move Button
Automatic Wash (Dry Type) Toilet
Dry Function
Seat Part Soft Closing Function
Power Saving Function
Main Unit Slide Detach Function
Continuous Warm Water Function
Soft Cleaning Function
※ Exterior design and product dimension is subject to change without any notice to consumers for improvement
of product quality.
37
In Case of Service Request
MEMO
Customer's Right
Customer has a valuable right to receive free service within warranty period from the purchasing
date in case of occurrence of any trouble while on use of product. However, in case of customer's
fault or natural calamity, we would like to let you that it will be our paid service even during the
warranty period.
Responsibility for Paid Service ( Customer's Share of Expense)
When service is requested, the following cases falls under paid service even during the warranty period:
1) Occurrence of trouble by throwing foreign substances(water, beverage, coffee, toy, and etc.)
into product.
2) Occurrence of product damage or malfunction by outside shock during installation or use.
3) Damage or deformation of external appearance of product by organic solvent like benzene or sinner.
4) Occurrence of trouble by using other parts or consumables than Ionia's formal product.
5) Occurrence of trouble by no observation on installation manual.
6) Occurrence of trouble by wrong use of gas type, gas pressure or electricity capacity.
7) parts are lost or damaged by random disassembly of product by customer.
8) Occurrence of trouble by repair or remodeling through other people than Ionia's repair engineers.
9) Occurrence of trouble by natural calamity(lighting, fire, damage from storm and flood, gas, damage
from sea water, earthquake, and etc.).
10) Occurrence of trouble by not observing "warning and caution for safety) on Ionia product user
manual. If you keep wanting and caution for safety, you can use product longer.
38
39
MEMO
40
MEMO
41