1. automotive and vehicles
2. boats and watercraft

2 0 0 6
C A T A L O G
|
B O A T
L I F T S
&
A C C E S S O R I E S
HydroHoist International, Inc.
WE DIDN’T SET OUT TO BECOME THE WORLD’S PREMIER
BOAT LIFT MANUFACTURER. We were simply looking for a
practical solution for keeping boats clean and dry when not in
use—without having to transport them inland (a solution that would
enable anyone to launch or dry-dock the boat with minimal effort).
convenience WITH THE FLIP OF A
SWITCH, LAUNCH OR DRY-DOCK YOUR
BOAT IN AS FEW AS FOUR MINUTES. NO
MORE TRAILERING. NO MORE BOAT
RAMPS. NO MORE HULL CLEANING.
M I S S I O N
S T A T E M E N T
HydroHoist International, Inc.,
is dedicated to manufacturing products that
That was in 1965. Today, this practical solution is an industry. And
HydroHoist is its flagship company. As avid boaters, we understand
achieve the industry’s highest levels of design
the investment and commitment that comes with owning a boat.
and construction quality. Our success will be
HULL AND OUT-DRIVE SAFELY
As proud business owners, we are dedicated to ensuring that every
measured primarily by our customers’
PROTECTED FROM WIND AND WAKE
product with the HydroHoist name meets our high standards of
satisfaction, and achieved through the
design and craf tsmanship.
unwavering dedication of every HydroHoist
protection YOUR BOAT IS
SECURELY DRY-DOCKED, ITS
DAMAGE, ALGAE AND MARINE
GROWTHS THAT COMPROMISE
YOUR BOAT’S PERFORMANCE,
HydroHoist Boat Lifts have
security LEAVE YOUR BOAT FOR AN HOUR
VALUE AND APPEARANCE.
evolved from a simple idea
OR A YEAR, WITH CONFIDENCE THAT IT
into a sophisticated, yet user-
WILL REMAIN SECURELY DRY-DOCKED.
NUMBER ONE IN DEPENDABILITY SINCE
friendly method of total boat care that is embraced worldwide.
1965, EACH HYDROHOIST IS ENGINEERED
It gives us great pleasure to present the 2006 edition of industry-
TO EXACTING STANDARDS AND THE
leading HydroHoist products and accessories.
HIGHEST QUALITY LEVELS TO ENSURE
PERFORMANCE AND RELIABILITY.
4
UltraLift™ UL Series
employee and authorized HydroHoist dealer.
6
Featuring “all steel above the water” and the only polyethylene tank
designed and manufactured exclusively for use in boat lifts. For floating
docks and boats up to 8,800 lbs.
Mega L™ Series
Keep your boat showroom clean, safe and ready for
action. For floating docks and boats up to 40,000 lbs.
Side-Tie™ B Series
8
Provides mooring in almost every type of dock, and
the capability to lift almost any powerboat or sailboat.
For fixed or floating docks, and boats up to 30,000 lbs.
10
Front Mount™ FM Series
Innovative front-mount installation design to accommodate double-size slips
and L-shaped moorings. For floating docks and boats up to 6,600 lbs.
12
HydroPort2™ PWC Platform
Drive on to dock, roll off to launch—it’s that easy.
Loaded with features for fast, convenient PWC docking.
UltraLift™ UL Series
THE ULTRALIFT ™ IS THE LATEST IN HYDROHOIST’S ULTRA-SUCCESSFUL line of boat-lifting
products. It is the only boat lift in the world with polyethylene tanks designed specifically for
The UltraGrip tank connection enables the
UltraLift™ to be installed with all steel parts
above water.
the marine environment—modeled, molded and shaped for seamless efficiency and safety.
Another unique feature is the UltraGrip tank connection, which enables the UltraLift™ to
S T A N D A R D
F E A T U R E S
be installed with all steel parts above water.* This innovative concept protects your boat
• Heavy-duty construction
against rust, corrosion and the elements for years of convenient and carefree storage.
• Precision-designed, custom-molded,
• Heavy-duty dock brackets with
• Boat-side, padded-step pitmans*
high-impact polyethylene tanks
• All steel parts above water*
• 5" ultra-high molecular weight
• Hot-dip, zinc-galvanized structural
steel frame and fasteners
square-hole bushings
• Two-piece urethane/stainless steel
• Full-width 4" frame channel with 3"
adjustable expansion channel
bumper guards
pivot bushings
• Heavy-duty hull support system
• Heavy-duty 1/4" torsion bars
• Superior marine-grade hardware
t e c h n i c a l
*Standard installation
s p e c s
• Boats up to 8,800 lbs.
RECOMMENDED FOR:
4
CUSTOM-MOLDED
POLYETHYLENE TANKS
are highly resistant to impact or low-water
damage. When stressed, the tanks flex
and then return to their original shape.
6600UL
4400UL
8800UL
6600UL 3TANK
• Boats up to 28' overall length
• Inboard or stern drive
ULTRALIFT™ UL SERIES LIFTING MIN. WATER
SPECIFICATIONS
CAPACITY
DEPTH
MIN. SLIP
WIDTH
MAX. SLIP NUMBER
WIDTH
OF TANKS
TANK
SIZE
• Drive-in or back-in installations
4400UL
4,400 lbs.
4.5 ft.
8.0 ft.
16.0 ft.
2
24"x32"x13.5'
• Floating docks and U-shaped slips
6600UL
6,600 lbs.
5.5 ft.
8.0 ft.
16.0 ft.
2
31"x32"x13.5'
66003TUL
6,600 lbs.
4.5 ft.
10.5 ft.
16.0 ft.
3
24"x32"x13.5'
8800UL
8,800 lbs.
5.5 ft.
8.0 ft.
16.0 ft.
2
31"x32"x17.5'
5
Mega L™ Series
S T A N D A R D
F E A T U R E S
• Extra heavy-duty construction
• Five-inch, ultra-high molecular
weight square-hole bushings
• Ultra-tough, marine-grade
• Two-piece urethane/stainless steel
fiberglass tanks
WHETHER YOU STORE YOUR BOAT IN A COVERED DOCK OR AN OPEN SLIP, our
showr
clean, safe and ready for fun. Every HydroHoist
classicc Mega L™ models keep it showroom
Mega L™ boat lift
lif utilizes
utilize heavy-duty dock brackets with bumper guards and rugged,
prote your hull from marine growth
marine-grade fiberglass tanks and hardware to protect
and dock damage. You can also customize your Mega L™ with a variety of options.
• Hot-dip, zinc-galvanized structural
pivot bushings
• Oversized, heavy-duty stabilizer
steel and fasteners
• Finest marine-duty hardware
• Heavy-duty dock brackets with
arms, frame and support structure
• Three-point heavy-duty hull
support system
bumper guards
• Boat-side, padded-step pitmans
• High-output air delivery system
O p t i o n s
Optional centering guides assist in positioning the
craft in the slip, making back-in easier.
The Mega L™ Series is available with optional custom
walkway planks and tank-side pitmans.
• Custom hull pads for special applications
• Side-of-boat walkways for wide slip applications
• Custom configurations for sailboats and special installations
• Centering guides to assist positioning
t e c h n i c a l
s p e c s
Larger units not shown. Units are custom-designed to boat specifications.
Four, six or eight stabilizer arms,
depending on lifting capacity
10000LL
2 TANK
14000LL
2 TANK
14000LL
3 TANK
16000LL
3 TANK
LONG PAD
• Boats up to 10,000 to 40,000 lbs.
RECOMMENDED FOR:
• Boats from 28' to 50' overall length
NO. OF
ARMS
LIFTING
CAPACITY
SLIP WIDTH NUMBER TANK
MIN–MAX OF TANKS SIZE
10LL
4
10,000 lbs.
9'–18'
2
32" x 23'
12LL3T
4
12,000 lbs.
12'–18'
2
32" x 23'
1
32" x 12'
14LL2T Long
6
14,000 lbs.
10'–18'
2
32" x 32'
14LL3T
6
14,000 lbs.
12'–18'
2
32" x 23'
25LL4T
6
25,000 lbs.
1
32" x 16'
28LL4T
8
28,000 lbs.
2
32" x 32'
2
32" x 32'
1
32" x 16'
32LL4T
8
32,000 lbs.
16' x 20'
4
32" x 38'
35LL5T
8
35,000 lbs.
19' x 20'
16000LL
3 TANK
16LL3T Long
6
16,000 lbs.
12'–18'
• Inboard or stern drive
• Drive-in or back-in installations
• Floating docks and U-shaped slips
6
MEGA L™
SERIES
16LL3T
6
16,000 lbs.
12'–18'
3
32" x 23'
18LL3T
6
18,000 lbs.
13'–20'
3
32" x 32'
MEGA L™
SERIES
NO. OF
ARMS
LIFTING
CAPACITY
22LL3T
6
22,000 lbs.
22LL4T
40LL5T
A water depth of six feet is required for all Mega L Series Lifts
6
8
22,000 lbs.
40,000lbs.
SLIP WIDTH NUMBER TANK
MIN – MAX OF TANKS SIZE
13'–20'
16' x 20'
2
32" x 38'
1
32" x 32'
2
32" x 23'
2
32" x 32'
16'–20'
4
32" x 32'
16' x 20'
2
32" x 38'
19' x 20'
3
32" x 32'
2
32" x 38'
5
32" x 38'
7
Side-Tie B Series
™
S T A N D A R D
F E A T U R E S
• Heavy-duty construction
• Ultra-tough, marine-grade
fiberglass tanks
HYDROHOIST SIDE-TIE™ B MODELS PROVIDE MOORING FOR POWERBOATS AND
• Superior marine-grade hardware
SAILBOATS IN FLOATING OR FIXED DOCKS. Floating walkways on each side offer a guide for
• Heavy-duty dock brackets
the boat when down, a step out of the boat when moored and a step into the boat when the boat
• High-output air delivery system
and lift are fully raised.
• Hot-dipped, zinc-galvanized
Side-Tie™ B Series lifts feature convenient floating
walkways.
O p t i o n s
structural steel and fasteners
• Custom hull pads for special applications
• Custom configurations for sailboats and special installations
• Centering guides to assist positioning
t e c h n i c a l
s p e c s
4500B
15000B
2 TANK
3 FRAME
• Boats up to 30,000 lbs.
RECOMMENDED FOR:
• Boats up to 60' overall length
• Inboard or stern drive, sailboats
7500B
15000B
4 TANK
2 FRAME
• Drive-in or back-in installations
• Fixed or floating docks
• One-side mooring
9000B
15000B
4 TANK
3 FRAME
20000B & 30000B
not shown. Units are
custom-designed to
boat specifications.
8
12000B
SIDE-TIE™ B SERIES
SPECIFICATIONS
LIFTING
CAPACITY
MIN. WATER
DEPTH
MIN. MOORING
WIDTH
NUMBER
OF TANKS
TANK
SIZE
4500B
4,500 lbs.
4.5 ft.
10.0 ft.
2
24” x 23’
7500B4T
7,500 lbs.
5.5 ft.
12.0 ft.
2
24” x 23’
2
24” X 16’
9000B
9,000 lbs.
6.5 ft.
Boat Beam +48”
2
32” x 23’
12000B
12,000 lbs.
6.5 ft.
Boat Beam +48”
2
32” x 32’
15000B2T3F
15,000 lbs.
6.5 ft.
Boat Beam +48”
2
32” x 38’
15000B4T2F
15,000 lbs.
6.5 ft.
Boat Beam +48”
15000B4T3F
15,000 lbs.
6.5 ft.
Boat Beam +48”
2
32” x 32’
2
24” x 16’
2
32” x 32’
2
24” x 16’
20000B4T3F
20,000 lbs.
6.5 ft.
Boat Beam +48”
4
32” x 32’
30000B4T3F
30,000 lbs.
6.5 ft.
Boat Beam +48”
4
32” x 38’
9
Front Mount ™ FM Series
HYDROHOIST'S FRONT MOUNT ™ BOAT LIFTS ALLOW PLENTY OF ROOM in the boat slip
for personal watercrafts, a fishing skiff and even a place to wet a fishing line. Our FM™ models are
designed for double-sized slips and L-shaped moorings.
The Front Mount™ FM Lift is perfect for double-sized slips and L-shaped moorings.
S T A N D A R D
F E A T U R E S
• Ultra-tough polyethylene tanks
• Superior marine-grade hardware
• Hot-dipped, zinc-galvanized
• Heavy-duty dock brackets
structural steel and fasteners
O P T I O N S
t e c h n i c a l
• Adjustable hull support
• Custom hull pads for special applications
• Custom mooring hardware
s p e c s
• Boats up to 6,600 lbs.
RECOMMENDED FOR:
• Boats up to 26' overall length
FRONT MOUNT™ FM LIFT
SPECIFICATIONS
• Floating docks
• Extra-wide slips
4400FM
6600FM
LIFTING
CAPACITY
MIN. WATER
DEPTH
MIN. SLIP
WIDTH
MAX. SLIP
WIDTH
NUMBER
OF TANKS
TANK
SIZE
4400FM
4,400 lbs.
7.0 ft.
8.5 ft.
N/A
2
24” x 32” x 13.5’
6600FM
6,600 lbs.
7 ft. 9 in.
8.5 ft.
N/A
2
31” x 32” x 13.5’
• L-shaped moorings
10
11
HydroPort2™ PWC Platform
PROTECT YOUR CRAFT AND ENJOY FAST, CONVENIENT ACCESS TO THE WATER with the
HydroPort2™ PWC Docking Platform. Its exclusive bow bumper slows your craft’s forward motion
and provides a soft rest for the keel. A replaceable keel guide and bow roller help center your
craft, and in-line rollers make launching easy and convenient.
The HydroPort
™
2
Drive on to load.
Roll off to launch.
can be front- or side-mounted on floating or fixed docks. Molded-in tie-down
loops are provided at the bow and at both sides of the stern to secure your craft. An optional
S T A N D A R D
connecting link locks multiple units together.
F E A T U R E S
• Front- or side-mount
• Ultra-tough polyethylene
mooring hardware
construction
Exclusive in-line rollers
Bow roller
Universal mooring in fixed or
floating docks, seawalls or piers
Replaceable keel guide
• Replaceable keel guide
• Anti-skid walk area
• Bow roller
• Universal hull support
• Exclusive in-line roller wheel design
• Front- or side-mount capability
on floating or fixed dock
• Exclusive bow bumper
Exclusive bow bumper
• Molded-in tie-down loops
O P T I O N S
Tie-down loops
on both sides of stern
• Connecting hardware to link multiple units
Multi-link and sidemount capabilities
Tie-down loop
t e c h n i c a l
s p e c s
HydroPort2™’s exclusive bow bumper
slows your craft’s forward motion
and provides a soft rest for the keel.
The replaceable keel guide and bow
roller helps center your craft. In-line
rollers make launching your craft easy.
Molded-in tie-down loops at the
bow and both sides of the stern
secure your craft when docked.
A connecting link locks multiple
units together.
• One-, two- and three-place PWCs
Patents Pending
RECOMMENDED FOR:
• Load capacity up to 1,500 lbs.
• Floating or fixed docks
HYDROPORT 2™
SPECIFICATIONS
HydroPort2
TOTAL LOAD
CAPACITY
OVERALL
LENGTH
OVERALL
WIDTH
OVERALL
DEPTH
TOTAL
WEIGHT
1,500 lbs.
11’6”
4’10”
15”
240 lbs.
• Side- or front-mount installations
12
13
1-VALVE CONTROL
Lift and launch your craft with the flip of a switch.
The attractive, weather-resistant polyethylene
housing and stainless steel fastening hardware make
the 1-Valve Control ideal for any dock setting.
DIVERTER VALVE
When installed in the hose of an existing lift, the
Diverter Valve allows the control to be diverted
to other lifts. This valve is often used to control
a PWC lift using the boat lift’s control unit.
MULTI-VALVE CONTROL
Two or four valves can be incorporated into the
Multi-Valve Control Unit. Standard with several
HydroHoist models, this unit also can be ordered as an
option, using each valve for other boat or PWC lifts.
HEAVY-DUTY DOCK BRACKET
(with Pipe Stand and Guard) | This bracket provides extra
gripping power and stability in rough water. The accompanying
steel pipe stand is covered with tough PVC pipe to keep
boats away from the Dock Bracket when entering the slip.
Parts & Accessories
POLE-MOUNT CONTROL
Ideal for lifts requiring only one motor and
one valve, the Pole-Mount Control attaches
to the dock’s vertical roof support post. The
Pole-Mount Control can be ordered with a
new lift, or ordered separately as a part. (Not
available with some HydroHoist models.)
14
Pitmans “Tank-Side” (“EP”—Economy Pitmans)
CENTERING GUIDES
These guides assist you in docking the boat and
centering the craft over the hoist for lifting.
PLANK KIT
Production kits or custom-designed plank kits
are handy accessories in wide boat slips.
STOP KIT
Designed for L and Ultra Series models,
the Stop Kit reduces vertical movement
of the raised hoist in rough water.
SLIP DIVIDER
Production kit or custom-designed, a Slip
Divider separates double-wide slips to provide
mooring for most HydroHoist Boat Lifts.
STANDARD DOCK BRACKET
This combination unit offers a lower profile than
the heavy-duty Dock Bracket, and is often used
in narrow slips where space is critical.
Pitmans “Boat-Side” (Padded Pitmans)
PITMANS
The pitmans of Level Lift L hoists are designed to be used in either the up (boat-side) or down (tank-side) position, depending on the demands of the
installation. Mega L™ and UltraLift™ models are offered with boat-side padded pitmans as standard equipment, but they may be installed with tank-side
pitmans when the boat slip is less than 24 inches wider than the boat beam.
FULL DECK
A popular option with L-Series™ hoists, a Full Deck
can be custom-designed for your boat and slip.
VS (PONTOON) PADS
VS Pads provide wide, padded support for pontoons and
certain deck boat applications. VS Pads can be ordered
with a new hoist or added to an existing unit.
15
G L O B A L
D I S T R I B U T I O N
C E N T E R S
HYDROHOIST BOAT LIFTS
(1) What Is Covered By This Warranty. HydroHoist International, Inc., (HydroHoist) warrants, to the original retail purchaser (Consumer) only, that the lift that is the subject of this sale is free from defects in
material or workmanship. The duration of this warranty, measured from date of installation, is limited as follows:
(a) Period of first ownership (“lifetime”) by the Consumer for Tanks;
(b) Thirty-Six (36) months for all other components;
(c) Twelve (12) months for Accessories and Parts not purchased with lift;
(d) Twelve (12) months or to the end of the original lift warranty, whichever is greater, for Warranty Parts.
If the Consumer discovers within this period a defect in material or workmanship, the Consumer must promptly notify HydroHoist in writing. In no event shall such notification be received by HydroHoist later
t one (1) month following expiration of the relevant warranty period. Within a reasonable time after such notification, HydroHoist will correct any defect in material or workmanship with either new or used
replacement parts. Such repair, including both parts and labor, is at HydroHoist’s expense. All warranty service will be performed at HydroHoist’s option either on site or at HydroHoist’s plant in Claremore,
Oklahoma, with freight charges prepaid by the Consumer. These remedies are the Consumer’s exclusive remedies for breach of warranty.
(2) What Is Not Covered By This Warranty. HydroHoist does not warrant any product, component or part (a) that is not manufactured by HydroHoist; (b) that is not installed or serviced by employees or
contractors of HydroHoist International, Inc., or an Authorized HydroHoist Dealer; (c) damage caused by failure to provide a suitable installation environment for the lift; (d) damage caused by the use of the
lift for purposes other than those for which it was designed; (e) damage caused by disaster such as fire, flood, wind and lightning; (f) damage caused by unauthorized attachments or modification; (g) damage
during shipment; or (h) damage caused by any other abuse or misuse by the Consumer.
A complete text of the HydroHoist Boat Lift Warranty is available by request from:
HydroHoist International, Inc. / P.O. Box 1286 / Claremore, OK 74018 USA / 918-341-6811
Warranties
HYDROPORT2™
16
(1) What Is Covered By This Warranty. HydroHoist International, Inc., (HydroHoist) warrants, to the original purchaser only, that the HydroPort2™ (a) conforms to HydroHoist’s published specifications, and (b)
is free from defects in material or workmanship. The duration of this limited warranty is 36 months (12 months for commercial use) from date of original consumer purchase on the roto-molded Polyethylene
Shell, Roller, Wheels, Keel Guide, Bow Bumper and Mooring Components sold as original equipment with the HydroPort2™. Said outer shell is warranted against cracking, peeling, sloughing and deterioration
with normal use, including normal exposure to sunlight or other ultraviolet rays. If the consumer discovers within this period a failure of the HydroPort2™ to conform to specifications or a defect in material or
workmanship, he/she must promptly notify HydroHoist in writing with a copy of original sales invoice for the product. In no event shall such notification be received by HydroHoist later than 37 months (13
months for commercial use) from the date of purchase. Within a reasonable time after such notification, HydroHoist will correct any failure of the HydroPort2™ to conform to specifications or any defect in
material or workmanship, with either new or used replacement parts. Such repair, including both parts and labor, is at HydroHoist’s expense. All warranty service will be performed at service centers designated
by HydroHoist with Buyer to furnish transportation of HydroPort2™ to and from the designated centers. If HydroHoist is unable to repair the HydroPort2™ in the first 36 months (12 months for commercial use)
of this warranty to conform to the warranty after a reasonable number of attempts, HydroHoist will provide, at its option, one of the following: (a) a replacement HydroPort2™, or (b) full refund of the purchase
price. These remedies are the purchaser’s exclusive remedies for breach of warranty.
(2) What Is Not Covered By This Warranty. HydroHoist does not warrant (a) any product, components or parts not sold as original equipment by HydroHoist, (b) defects caused by failure to provide a suitable
installation environment for the HydroPort2, (c) damage caused by use of the HydroPort2™ for purposes other than those for which it was designed, (d) damage caused by disasters such as fire, flood, wind, and
lightning, (e) damage caused by unauthorized attachments or modification, (f) damage during shipment, or (g) any other abuse or misuse by the purchaser.
A complete text of the HydroPort2™ Warranty is available by request from:
HydroHoist International, Inc. / P.O. Box 1286 / Claremore, OK 74018 USA / 918-341-6811
USA
Canada
Mexico
Caribbean
HYDROHOIST
DEALER NETWORK:
UK
France
Spain
Portugal
Germany
Switzerland
Italy
Netherlands
Norway
Sweden
Finland
AUTHORIZED HYDROHOIST DEALERS ARE
LOCATED THROUGHOUT NORTH AMERICA,
EUROPE AND THE PACIFIC.
GRAND LAKE, OK
DISTRIBUTION CENTER
Hwy. 85A
Bernice, OK 74331
800-864-2160 (toll free)
For the name of the dealer
servicing your area, phone
1-800-825-3379 in the U.S.,
or visit our Web site at
www.boatlift.com.
TABLE ROCK, MO
DISTRIBUTION CENTER
9794 State Hwy. 13
Kimberling City, MO 65686
800-259-7532 (toll free)
Turkey
UAE
Kuwait
Saudi Arabia
Bahrain
Hong Kong
Malaysia
Australia
New Zealand
TENNESSEE DISTRIBUTION CENTER
1825 Gainesboro Hwy.
Baxter, TN 38544
800-864-4023 (toll free)
TEXAS DISTRIBUTION CENTER
13703 N. Hwy. FM 120
Pottsboro, TX 75076
888-341-6817 (toll free)
NORTH CAROLINA
DISTRIBUTION CENTER
1258 River Hwy.
Mooresville, NC 28117
866-799-1800 (toll free)
SOUTH TEXAS
DISTRIBUTION CENTER
5403 Doss
Austin, TX 78734
888-341-6817 (toll free)
EUROPEAN DISTRIBUTION CENTER
HydroHoist GmbH Europe
Ludwig-Lange-Str. 11
67547 Worms, Germany
+49 (0) 6241 9548 0
HYDROHOIST AUSTRALIA
6 Lombak St.
Acacia Ridge
Queensland, 4110 Australia
17
S a l e s
Q u o t e
Boat Description
Brand:
Length:
Weight:
Engine:
Style:
Color:
Beam:
Drive:
Boat #:
Dock Description
Slip Configurations
❏ Floating U-Slip
18
❏ Floating V-Slip
Slip Width:
Slip Length:
Covered:
Open:
❏ Floating Square Dock
❏ Foam Flotation
❏ Plastic Flotation
❏ Fascia Board
❏ Freeboard
❏ Underwater brace or obstruction
Dock Description
Product Description:
$
$
$
Optional Equipment:
$
$
$
Serial #:
Terms:
$
Total Selling Price
$
Sales Tax
$
Freight
$
Installation
$
Sub-Total
$
Deposit
$
TOTAL
$
19
©2006 HYDROHOIST
INTERNATIONAL, INC.
MASTER CATALOG/2006
Your authorized HydroHoist dealer is:
HYDROHOIST INTERNATIONAL, INC.
CORPORATE OFFICES
915 West Blue Starr Drive • P.O. Box 1286 • Claremore, OK 74018 USA
918-341-6811 • 1-800-825-3379 (U.S.)
[email protected] • www.boatlift.com