Perfactory® Material E-Guard EnvisionTEC’s E-Guard is a biocompatible crystal clear material for the production of accurate splints and retainers on the Perfactory® line of 3D Printers. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility. High resolution 3D printing allows for precise fit. Finally, the cost of high quality splints and retainers can be dramatically lower when produced using E-Guard on an EnvisionTEC 3D printer in comparison to previous machining methods, making EnvisionTEC the clear choice for any digital dental laboratory. Material Properties* Method** Description Value ISO 20795-2-2013 Flexural Strength 80.9 MPa ISO 20795-2-2013 Flexural Modulus 2123 MPa ISO 20795-2-2013 Charpy Impact Strength Unnotched 13.3 kJ/m2 ISO 20795-2-2013 Elongation at Break ISO 20795-2-2013 Water Sorption 27.8 µg/mm2 ISO 20795-2-2013 Water Solubility 1.4 µg/mm2 ISO 20795-2-2013 Biocompatibility Biocompatible compliance 3.81% *All data provided is preliminary data and must be verified by the individual user. **Tested according to test methods of ISO 20795-2-2013 Dentistry - Base Polymers: Part 2 - Orthodontic Base Polymers. The test methods differ from the test methods used commonly in the 3D printing industry and are therefore not comparable. Recommended Machines Perfactory® 4 DDP Series Applications Dental EnvisionTEC GmbH Brüsseler Straße 51 • D-45968 Gladbeck • Germany Phone +49 2043 9875-0 Fax +49 2043 9875-99 EnvisionTEC, Inc. 15162 S. Commerce Dr. Dearborn, MI 48120 • USA Phone +1-313-436-4300 Fax +1-313-436-4303 www.envisiontec.com [email protected]