1. No category

Quick Skive Removal Tools
Quick Skive removal tools consist of an ergonomically
designed handle that uses special engineered nonmetallic blades specifically designed for removing
materials from delicate, fragile and scratch prone
surfaces. The blade materials and angles were
originally designed for small area removal of stubborn
stealth materials and gap fillers from aircraft fuselages
and components for on- and off-aircraft repair
applications.
Quick Skive Removal Tool
The Quick Skive tools provide the best results when
used in a worker-friendly heat-skive process, which
combines a heat depositing process using a heat gun
or other heating source followed by skiving off the
heated materials with the quick skive tool.
Quick Skive tools have many applications for aviation and industry.
• Aviation: Remove specialty materials, gap fillers, and sealants from
fuselages, access panels, and fuel tanks without damaging the underlying
primer coating or the substrates. Approved for use on U.S. Air Force (USAF)
Quick Skive Kit
military aircraft. Benefits for USAF Military aircraft:
• Increase removal rates for repair applications
• Heat-Skive is approximately 30 times faster than typical sanding process removal rates.
• Simple process (one-person operation)
• No damage to primer, substrate, or metal treatment
• No secondary waste
• No dust to capture
• No volatile organic compounds (VOC) or hazardous air pollutant (HAP) emissions
• Industrial: Cleans sealants and fillers without scratching steel, aluminum, fiberglass,
composite, glass, and other delicate surfaces.
Current Products
Quick Skive Kit (P/N 08470A01)
The Quick Skive Kit contains an assortment of 8 non-metallic blades and an ergonomically designed
handle with quick disconnect blade capabilities. The kit is ideal for removal of stealth materials,
sealants, and gap fillers from aircraft fuselages and components for on- and off-aircraft repair
applications. The kit includes the items listed in the table below.
Qty,
Description
Part Number
2
Single sided PEEK blades (1.250”)
08463H01
2
Single sided PEEK blades (0.750”)
08463H02
2
Asymmetrical Ultem™ gap blades (0.230”)
08464H02
2
Asymmetrical Ultem™ gap blades (0.170”)
08464H04
1
Ergonomic handle assembly
08376A01
1
Case with custom foam insert
08471A01
Quick Skive Handle (P/N 08376A01)
The injection molded handle is made with DuPont™ Rynite® 935 thermoplastic for great durability,
and has a Neoprene® rubber padded grip. The handle works exclusively with the Quick Skive
blades and the quick-disconnect capability allows the operator to quickly change between blade
types. Designed to comfortably fit in the user’s hand, the handle reduces operator fatigue and
prevents injury to the user.
Item
Description
Part Number
Ergonomic handle assembly
Thermoplastic handle with neoprene rubber grip.
Fixed handle head with 15º angle.
08376A01
Quick Skive Blades
The Quick Skive blades consist of PEEK blades for bulk material removal and Ultem™ blades for
sealant and gap filler removal. The special blade materials and designed angles were specifically
chosen for removing difficult to remove materials from delicate, fragile and scratch prone surfaces
such as aircraft fuselages and components.
PEEK Blades
PEEK blades offer a lubricious material that will not damage substrates or delicate surfaces and
is best used for bulk material removal applications. The current blade designs for this material
are listed below.
Item
Description
Part Number
Single sided PEEK blades (1.250”)
50º angle – single sided cut. Blade tip width is
1.25”.
08463H01
Single sided PEEK blades (0.750”)
50º angle – single sided cut. Blade tip width is
0.75”.
08463H02
Ultem™ Blades
Ultem™ blades offer a lubricious material that will not damage substrates or delicate surfaces
and is best used for gap filler material removal applications. The current blade designs for this
material are listed below.
Item
Description
Part Number
Asymmetrical Ultem™ gap blades
(0.230”)
25º/25º angle – double sided (asymmetrical 1/3 to
2/3) cut. Blade tip width is 0.230”.
08464H02
Asymmetrical Ultem™ gap blades
(0.170”)
25º/25º angle – double sided (asymmetrical 1/3 to
2/3) cut. Blade tip width is 0.170”.
08464H04
About Enterprise Ventures Corporation
Enterprise Ventures Corporation (EVC) is a for-profit organization that acts as the technology
commercialization arm for Concurrent Technologies Corporation (CTC). The mission of EVC is to
transfer advanced technologies to the industrial base and to deliver high-technology products and
services to our clients. EVC’s two primary lanes of business are production services and low cost
professional services.
Order Contact Information:
CTC Enterprise Ventures
Corporation (EVC)
Cage Code: 3RWH7
DUNS Number: 065104155
100 CTC Drive
Johnstown, PA 15904-1935
www.ctc.com
Ms. Michele Adams
Procurement POC
Ph: 814-269-2794
Email: [email protected]
Neoprene® and Rynite® are trademarks of E.I. du Pont de Nemours & Co., Inc.
04/11