1. No category

When Safety Matters
EZA6005 :: EZA6004 - Toggle Lock Anchor 3/4” & 7/8”
Toggle Lock Anchor
The EZ 5K Concrete Toggle Anchor is a versatile, portable concrete/steel
anchorage connector, used exclusively for fall protection and can be inserted
inside precast concrete and steel flanges. Designed for use in 12 inch thick
cured concrete with a compression strength of at least 3000 p.s.i. It’s easy to
install (just compress its spring and insert the cable shaft into the hole). This
multifunctional anchor may be used on vertical and overhead surfaces, as
well as in combination with horizontal lifelines. It is suitable for fall arrest,
restraint, and as a work positioning device. The EZ Toggle anchor has a
maximum capacity of 400 pounds when used in combination with equipment
certified for loads in excess of the OSHA and ANSI regulated maximum of
310 pounds. The EZ Toggle Concrete Anchor fits holes of ¾” and 7/8” in
diameter and 3 inches deep, and has an ultimate breaking strength of 5,000
pounds.
• 3/4” and 7/8” Anchors
• Compliance: ANSI Z359.7 & CE-EN 795
• Weight: 0.45 lbs.
All of EZ Lifline’s equipment meets or
exceeds OSHA and ANSI standards
EZA6005 :: 3/4” Toggle Lock Anchor
Diameter:
Depth:
3/4 in.
3 in.
Anchor Point Capacity:
Breaking Strength:
Compression Strength:
400 lbs.
5000 lbs. / 22 kn
3000 psi.
EZA6004 :: 7/8” Toggle Lock Anchor
Diameter:
Depth:
7/8 in.
3 in.
Anchor Point Capacity:
Breaking Strength:
Compression Strength:
400 lbs.
5000 lbs. / 22 kn
3000 psi.
EZLifline.com • (800) 417-9272 • [email protected]