Z-PACK 2mm FB (Futurebus+) Connectors Product Facts ■ High-density connections; four-row and five-row, 2mm x 2mm circuit grid ■ Modular design for signal and power connections ■ Compatible to International Specifications IEC 61076-4-104 and EIA SP3179 ■ Module assemblies are endto-end stackable ■ “Monoblock” styles available ■ Choice of solder leads or compliant press-fit leads ■ Flat rock receptacle tooling ■ Press peg receptacle retention for low applied cost ■ Integral receptacle lead organizer ■ Performance meets Telcordia uncontrolled environment per GR-1217-CORE ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 ■ Certified by Canadian Standards Association, ® File No. LR7189 ■ Produced under a quality management system certified to ISO 9001. A copy of the certificate is available upon request. ® While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Photo Number 107722 Tyco Electronics Z-PACK 2mm FB two-piece connector system uses a modular concept and a 2mm contact pitch to provide high-density, highspeed signal and power connections for Futurebus+ and Futurebus+ “like” applications. These versatile connectors are designed to meet the requirements of International Specification IEC 61076-4-104 with applications that include workstations, personal computers, process controllers and telecommunications equipment. Signal and power modules are available in pin and receptacle assemblies with a choice of either solder leads or compliant press-fit leads. Compliant press-fit leads offer fast, solderless application to printed circuit boards. Pin and receptacle housings are made of a high temperature liquid crystal polymer. Contacts are gold or gold flash over palladium nickel and conform to all testing specified for Telcordia Uncontrolled Environment. The signal modules are end-to-end stackable, providing 88 signal lines per cm [50.8 signal lines per inch]. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Signal pin and receptacle modules are available in position sizes of 24 through 264 in increments of 24 positions for 4 row. Sizes of 30 through 330 in increments of 30 position for 5 row. Power pin and receptacle modules are available in an 8-position size with compatible footprints for 4 row. Available in a 10 position size with compatible footprints for 5 row. Signal and power modules are available in integrally molded Monoblock configurations for added versatility. © 2005 by Tyco Electronics Corporation. All Rights Reserved AMP, TYCO and Z-PACK are trademarks. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. Other products, logos, and Company names mentioned in herein may be trademarks of their respective owners. 1 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Table of Contents and Technical Documents Table of Contents Product Facts ……………………………………………………………………………………………1 Technical Documents ……………………………………………………………………………………2 Signal Integrity Services: Taking SI to the Next Level ………………………………………………3 Features and Benefits ……………………………………………………………………………………4 Signal Modules: 4 Row, Signal Modules, Vertical Pin Assemblies …………………………………………………5,6 5 Row, Signal Modules, Vertical Pin Assemblies …………………………………………………7,8 4 Row, Signal Modules, Vertical Feed-Through Pin Assemblies …………………………………9 5 Row, Signal Modules, Vertical Feed-Through Pin Assemblies…………………………………10 4 Row Vertical Feed-Through Shrouds ……………………………………………………………11 5 Row Vertical Feed-Through Shrouds ……………………………………………………………12 4 Row, Signal Modules, Right-Angle Pin Assemblies ……………………………………………13 5 Row, Signal Modules, Right-Angle Pin Assemblies ……………………………………………14 Worksheet for Sequenced and Select Load 4 Row Signal Pin Headers ………………………15 Worksheet for Sequenced and Select Load 5 Row Signal Pin Headers ………………………16 4 Row, Signal Modules, Right-Angle Receptacle Assemblies……………………………………17 5 Row, Signal Modules, Right-Angle Receptacle Assemblies……………………………………18 4 Row, Signal Modules, Vertical Receptacle ………………………………………………………19 5 Row, Signal Modules, Vertical Receptacle ………………………………………………………20 Power Modules, 2mm x 2mm Circuit Grid: 4 Row, Power Modules, Vertical Pin Assemblies …………………………………………………21 5 Row, Power Modules, Vertical Pin Assemblies …………………………………………………22 Worksheets for Sequencing Power Pin Headers …………………………………………………23 4 Row, Power Modules, Right-Angle Receptacle Assemblies……………………………………24 5 Row, Power Modules, Right-Angle Receptacle Assemblies……………………………………25 Unshielded Cable Connectors ………………………………………………………………………26 Performance/Test Level Data and Material Specifications ………………………………………27 AMP Press-Fit Contacts ………………………………………………………………………………28 Seating and Replacement Tooling ………………………………………………………………29,30 Part Number Index ……………………………………………………………………………………30 Non-RoHS to RoHS Compliant Part Number Cross Reference (including tin-lead) ……31,32,33 Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1441 Z-PACK 2mm FB, Signal and Power Connector 108-19196 Z-PACK 2mm Unshielded FB Cable Connector Application Specification describes the requirements for using the product in its intended application. It is intended for the Packaging and Design Engineer and the set-up person. 408-6927 Design Recommendations for Printed Circuit Board Support Fixture. 408-9910 AMP Seating Tool 58511-[] for Z-PACK 2mm Futurebus Pin Headers with Compliant Lead Contacts 408-9979 Pin Repair Kit 354687-1 for Z-PACK 2mm HM and FB Pin Contacts Electrical Performance Reports contain abstracts of the results of various computer simulations of electrical interconnection performance. They are intended for the Electrical and Design Engineer. 65476 Z-PACK 2mm FB (Futurebus+) Connector (2mm Centerline, Four-Row, Right-Angle Receptacle, Through-Hole Mount) 114-19047 Z-PACK 2mm FB+ (Futurebus+) Unshielded Cable Connector. 1242176 Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. Z-PACK 2mm FB (Futurebus+) Connector (2mm Centerline, Five-Row, Right-Angle Receptacle, Through-Hole Mount) Need more information? 114-1075 408-4157 408-4038 408-4250 Z-PACK 2mm FB+ (Futurebus+) Receptacle and Pin Header Connectors. AMP Vertical Power Contact Header Connector Seating Tool, 58512-[ ] PC Board Support Fixtures 679980-1, -2 for AMP Z-PACK 2mm FB+ (Futurebus+) and 2mm HM Receptacle Tooling. Signal Header Seating Tool for 5 Row Z-PACK 2mm FB+ (Futurebus+) 318860-[ ] Contacts 408-4488 Seating Tools 1214224-[ ] for Z-PACK 2mm Futurebus+ Power Headers with Compliant Lead Contacts Catalog 65358 Revised 2-05 Dimensions are in millimeters unless otherwise specified. 2 www.tycoelectronics.com Call Tyco Electronics Product Information Center: 1-800-522-6752. The Product Information Center is staffed with specialists well versed in all Tyco Electronics products. The Center can provide you with: ■ Engineering Support ■ Catalogs ■ Technical Documents ■ Product Samples ■ Tyco Electronics Authorized Distributor Locations ■ Tyco Electronics Fax Service…24 hours a day Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Signal Integrity Services: Taking SI to the Next Level Solutions Our goal is to apply system-level expertise to design, simulate, and verify a system to meet your performance goals. We have completed hundreds of system designs and have years of experience in system layout, design, simulation and product selection. Our modeling skills and techniques are second to none with an extensive library of Tyco Electronics product models ready to go to work on your design. Simulation Tyco Electronics’ Signal Integrity engineers use very sophisticated suite of tools to provide accurate connector and system models to 20 GHz and beyond. Whether we are analyzing a connector or an entire system, Tyco Electronics has the tools and expertise to get the right answer. Our tool suite includes 2D and 3D full-wave analysis, with solutions in both the time and frequency domains. Models Tyco Electronics provides a variety of tools to aid customers in their design: ■ SPICE single-line and multi-line models ■ S-parameter models ■ Customer evaluation boards using realistic system implementations ■ Electrical Performance Reports (EPRs) with information on many high speed products. Testing With measurement capabilities beyond 10 Gb/s and 50 GHz, Tyco Electronics can characterize and provide detailed measurements of various products. Measurements of a product within a system can be invaluable to assure the successful implementation of a design, including measurements from silicon companies that have teamed with Tyco Electronics. For more info: [email protected] [email protected] www.tycoelectronics.com/products/simulation/ 3 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Receptacle Features and Benefits ■ Low applied cost and inexpensive “flat rock” tooling. ■ Press peg feature eliminates heat staking and problems associated with heat staking. ■ Housing extends over the back of the connector protecting the leads during shipping, handling, and assembly. ■ Leads are stamped to shape versus bent to shape, giving excellent structural strength. ■ Compliant pin lead option can be used to apply connectors on surface mount cards, eliminating an additional soldering operation. ■ Lead organizers are an integral part of the connector body. ■ Leads held into true position of .2mm for ease of insertion into boards. ■ Lead organizer enhances the rigidity of the leads. ■ Organizer can not dislodge from the connector. 4 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Signal Modules, Vertical Pin Assemblies 16mm Wide Body Vertical Pin Assemblies with Solder Leads and Compliant Press-Fit Leads 15.80 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 A Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-9910, 408-9979 Electrical Performance Report 65476 11.50 11.50 Rows A B C D 13.60 17.00 13.60 3.40 Mating Post Length (See Page 6) Lead Length (See Page 6) Mating Post Length (See Page 6) Side View 3 Spaces at 2.00 = 6.00 Solder Leads End View 4.25 (Lead Length) 3 Spaces at 2.00 = 6.00 Compliant Press-Fit Leads *For contact load variations (sequenced or select-load pins), use worksheets on pages 15 and 16 to define your requirements. 5 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Signal Modules, Vertical Pin Assemblies (Continued) 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) 4.001 3 Spaces at 2.00 = 6.00 12.001 2.00 +0.101 -0.00 Dia. Typ. (Drilled Hole) 1.50 B Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Dimensions apply to solder lead versions only. 1 Vertical Pin Assemblies with Solder Leads Dimensions Number of Positions A B 24 48 72 96 120 144 168 192 216 240 264 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 5.00 536513-1 536513-2 — 536513-3 — 536513-5 — 536513-4 — — — Part Numbers Solder Lead Length of 4.25mm Mating Post Lengths (mm) 5.75 6.50 536549-1 536501-1 536549-2 536501-2 — 1-536501-1 — 536501-3 — 536501-6 — 536501-5 — 536501-7 — 536501-4 — 536501-9 — 536501-8 — 1-536501-0 7.25 — 536551-2 — — — — — 536551-4 — — — Solder Lead Length of 3.20mm Seating Tooling Mating Post Length (mm) 6.50 536536-1 58511-1 536536-2 58511-2 1-536536-1 1-58511-4 536536-3 58511-3 — 58511-6 — 58511-5 — 58511-7 536536-4 58511-4 — 58511-8 — 58511-9 — 1-58511-0 Vertical Pin Assemblies with Press-Fit Leads Number of Positions 24 48 72 96 120 144 168 192 216 240 264 Dimensions A B 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 5.00 536514-1 536514-2 — 536514-3 536514-6 536514-5 — 536514-4 — — — Part Numbers Lead Length of 4.25mm Mating Post Lengths (mm) 5.75 6.50 7.25 536524-9 536504-1 536542-1 536524-2 536504-2 536542-2 — 1-536504-2 — 536524-3 536504-3 536542-3 536524-6 536504-6 536542-6 — 536504-8 — — 536504-5 — 536524-4 536504-4 536542-4 — 1-536504-0 — 536524-1 536504-9 — — 1-536504-1 — Seating Tooling 8.00 536515-1 536515-2 — 536515-3 — — — 536515-4 — — — 58511-1 58511-2 1-58511-4 58511-3 58511-6 58511-5 58511-7 58511-4 58511-8 58511-9 1-58511-0 Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 6 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Signal Modules, Vertical Pin Assemblies 18mm Wide Body Vertical Pin Assemblies with Solder Leads and Compliant Press-Fit Leads 17.80 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 A Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-4250, 408-9979 Electrical Performance Report 1242176 13.50 13.50 Rows A B C D E 3.40 3.40 13.60 13.60 Mating Post Length (See Page 8) Lead Length (See Page 8) 4 Spaces at 2.00 = 8.00 Side View Mating Post Length (See Page 8) 4.25 (Lead Length) 4 Spaces at 2.00 = 8.00 End View Solder Leads Compliant Press-Fit Leads *For contact load variations (sequenced or select-load pins), use worksheets on pages 15 and 16 to define your requirements. 7 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Signal Modules, Vertical Pin Assemblies (Continued) 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) 4.001 4 Spaces at 2.00 = 8.00 14.001 +0.101 -0.00 Dia. Typ. (Drilled Hole) 2.00 1.50 B Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Dimensions apply to solder lead versions only. 1 Vertical Pin Assemblies with Solder Leads Dimensions Number of Positions A B 30 60 90 120 150 180 210 240 270 300 330 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 Part Numbers Solder Lead Length of 4.25mm Mating Post Lengths (mm) 5.00 6.50 223010-1 223000-1 223010-2 223000-2 — 223000-3 223010-4 223000-4 — 223000-5 — 223000-6 — 223000-7 223010-8 223000-8 — 223000-9 — 1-223000-0 — 1-223000-1 Solder Lead Length of 3.20mm Mating Post Length (mm) 6.50 223013-1 223013-2 — 223013-4 — 223013-6 223013-7 223013-8 — 1-223013-0 1-223013-1 Seating Tooling 318860-1 318860-2 318860-3 318860-4 318860-5 318860-6 318860-7 318860-8 318860-9 1-318860-0 1-318860-1 Vertical Pin Assemblies with Press-Fit Leads Number of Positions 30 60 90 120 150 180 210 240 270 300 330 Dimensions A B 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 5.00 223011-1 223011-2 — 223011-4 — — — 223011-8 — — — Part Numbers Lead Length of 4.25mm Mating Post Lengths (mm) 5.75 6.50 7.25 223016-1 223002-1 223017-1 223016-2 223002-2 223017-2 223016-3 223002-3 — 223016-4 223002-4 223017-4 223016-5 223002-5 — 223016-6 223002-6 — 223016-7 223002-7 — 223016-8 223002-8 223017-8 223016-9 223002-9 — 1-223016-0 1-223002-0 — 1-223016-1 1-223002-1 — Seating Tooling 8.00 223018-1 223018-2 — 223018-4 — — — 223018-8 — — — 318860-1 318860-2 318860-3 318860-4 318860-5 318860-6 318860-7 318860-8 318860-9 1-318860-0 1-318860-1 Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 8 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Signal Modules, Vertical Feed-Through Pin Assemblies 16mm Wide Body Vertical Pin Assemblies with Feed-Through Compliant Press-Fit Leads 15.80 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. A 11.50 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 Rows A B C D 13.60 3.40 Technical Documents (page 2): Mating Post Length1 (See Chart Below.) Lead Length1 (See Chart Below.) Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-9910, 408-9979 Electrical Performance Report 65476 End View Side View 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Compliant Press-Fit Leads 3 Spaces at 2.00 = 6.00 3 Spaces at 2.00 = 6.00 2.00 B Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Vertical Feed-Through Pin Assemblies Dimensions No. of Positions A 24 48 96 144 192 11.88 23.88 47.88 71.88 95.88 B 10.00 22.00 46.00 35.00 94.00 5.00 5.00 11.80 536531-1 536531-2 536531-3 — 536531-4 13.6 223633-1 223633-2 223633-3 — — Part Numbers Mating Post Length 5.75 5.75 Press-Fit Lead Length 15.6 17.00 — 536532-1 223604-2 536532-2 — 536532-3 — — — 536532-4 6.50 13.60 536526-1 536526-2 536526-3 536526-5 536526-4 7.25 15.60 536533-1 536533-2 536533-3 — 536533-4 Seating Tooling 58511-1 58511-2 58511-3 58511-5 58511-4 1 Sequencing of the mating posts and lead lengths is available. (See Page 15.) For feed-through shroud availability (See Page 11.) Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 9 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Signal Modules, Vertical Feed-Through Pin Assemblies 18mm Wide Body Vertical Pin Assemblies with Feed-Through Compliant Press-Fit Leads 17.80 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. A 13.50 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 Rows A B C D E 13.60 3.40 Technical Documents (page 2): Mating Post Length1 (See Chart Below.) Lead Length1 (See Chart Below.) Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-4250, 408-9979 Electrical Performance Report 1242176 End View Side View 4 Spaces at 2.00 = 8.00 Compliant Press-Fit Leads B 4 Spaces at 2.00 = 8.00 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Vertical Feed-Through Pin Assemblies Dimensions Number of Positions A B 30 60 120 240 11.88 23.88 47.88 95.88 10.00 22.00 46.00 94.00 5.75 15.6 223019-1 223019-2 223019-4 223019-8 Part Numbers Mating Post Length 6.50 5.75 Press-Fit Lead Length 13.6 17.0 223055-1 223020-1 223055-2 223020-2 223055-4 223020-4 223055-8 223020-8 6.50 Seating Tooling 17.0 223021-1 223021-2 223021-4 223021-8 318860-1 318860-2 318860-4 318860-8 1 Sequencing of the mating posts and lead lengths is available. (See Page 16.) For feed-through shroud availability. (See Page 12.) Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 10 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row Vertical Feed-Through Shrouds For applications using Vertical Pin Assemblies with Feed-Through Compliant Press-Fit Leads 15.80 Material: Liquid crystal polymer Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 A Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Electrical Performance Report 65476 11.50 13.60 10.65 Side View 15.80 3.50 End View Compliant Press-Fit Leads Vertical Feed-Through Shrouds Number of Positions 24 48 96 192 Dimensions A 11.88 23.88 47.88 96.88 B 10 22 46 94 Part Number 536565-1 536565-2 536565-3 536565-4 11 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row Vertical Feed-Through Shrouds For applications using Vertical Pin Assemblies with Feed-Through Compliant Press-Fit Leads 17.80 Material: Liquid crystal polymer Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 A Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Electrical Performance Report 1242176 13.50 13.60 3.50 Side View 17.80 End View Compliant Press-Fit Leads Vertical Feed-Through Shrouds Number of Positions 30 60 90 120 150 180 210 240 270 Dimensions A 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 B 10 22 34 46 58 70 82 94 106 Part Number 223041-1 223041-2 223041-3 223041-4 223041-5 223041-6 223041-7 223041-8 223041-9 12 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Signal Modules, Right-Angle Pin Assemblies 16mm Wide Body Right-Angle Pin Assemblies with Solder Leads and Compliant Press-Fit Leads 3 Spaces at 2.00 = 6.00 13.60 Dim. B 5.00 Ref. 10.90 11.20 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. 15.80 Ref. 2.73±0.3 Typ. 1.50 Position A1 5.90 Ref. 0.50 Ref. A Ref. 11.50 17.50 3 Spaces at 2.00 = 6.00 13.60 5.00 Ref. 10.90 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 11.20 11.50 1.50 Position A1 5.90 Ref. 4.00 5.00 17.50 3.35±0.3 Typ. 3 Spaces at 2.00 = 6.00 Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 Electrical Performance Report 65476 +0.10 -0.00 Dia. Typ. Drilled Hole 2.05 4.00 12.00 Typ. 1.00 +0.10 -0.00 Dia. Typ. (Drilled Hole) 1.50 3.00 ±0.15 4.00 3 Spaces at 2.00 = 6.00 Dim. B 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Right-Angle Pin Assemblies No. of Positions 24 48 72 96 120 144 168 192 Dimensions A B 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 Part Numbers with with Solder Leads Press-Fit Leads 223513-1 223514-1 223513-2 223514-2 223513-7 — 223513-3 223514-3 223513-6 223514-6 223513-5 223514-5 223513-8 — 223513-4 223514-4 Seating Tooling Industry Standard Flat Rock Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 13 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Signal Modules, Right-Angle Pin Assemblies 16mm Wide Body Right-Angle Pin Assemblies with Solder Leads and Compliant Press-Fit Leads 0.50 Ref. 13.60 Ref. 4 Spaces at 2.00 = 8.00 Dim. B Material and Finish: 12.90 5.00 Ref. 0.75 17.80 Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. 13.20 13.50 Ref. 17.80 Ref. 2.65 3.35 Ref. 4 Spaces at 2.00 = 6.00 A Ref. 19.50 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 Technical Documents (page 2): 5.00 Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 Electrical Performance Report 65476 +0.10 +0.10 -0.00 1.50 -0.00 Dia. Typ. Dia. Typ. Drilled Hole (Drilled Hole) 2.05 4.00 12.00 Typ. 1.00 3.00 ±0.15 4.00 4 Spaces at 2.00 = 8.00 Dim. B 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Right-Angle Pin Assemblies Dimensions No. of Positions A B 30 60 90 120 150 180 210 11.88 23.88 35.88 47.88 59.88 71.88 83.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 Part Numbers with Press-Fit Leads 223524-1 223524-2 223524-3 223524-4 223524-5 223524-6 223524-7 Seating Tooling Industry Standard Flat Rock Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 14 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Worksheet for Sequenced and Select-Load 4 Row Signal Pin Headers Position A1 Fill in the Matrix at right with the appropriate letter code for the preferred mating post and lead length. Please forward to your Tyco Electronics Sales Engineer. Press-Fit Letter Code A B C D E F G H J K L M N P R S T U V W X Y Solder Letter Code BA BE BJ BN BT Mating Post Length 5.00 5.00 5.00 5.00 5.75 5.75 5.75 5.75 6.50 6.50 6.50 6.50 7.25 7.25 7.25 7.25 8.00 8.00 8.00 8.00 6.50 7.25 Press-Fit Letter Code BB FF GG HH MM NN PP RR SS TT UU VV WW XX YY ZZ DA DB DC Lead Length 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 13.60 13.60 Solder Letter Code BO BQ BX BY BZ A B C Mating Post Length 0.75 5.75 5.00 8.25 8.25 7.00 8.25 7.00 8.00 7.00 5.75 8.00 5.75 5.00 8.00 6.5 5.00 7.25 7.25 5.00 5.75 6.50 7.25 8.00 Lead Length 12.95 12.95 13.60 13.60 4.25 4.25 17.00 17.00 13.60 13.60 13.60 14.90 14.90 14.90 17.70 16.30 16.30 16.30 14.40 3.20 3.20 3.20 3.20 3.20 D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 A 24 48 96 120 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 B C D 144 168 192 216 240 264 15 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Worksheet for Sequenced and Select-Load 5 Row Signal Pin Headers Position A1 Fill in the Matrix at right with the appropriate letter code for the preferred mating post and lead length. Please forward to your Tyco Electronics Sales Engineer. Press-Fit Letter Code A B C D E F G H J K L M N P R S T U V W X Y Solder Letter Code BA BE BJ BN BT Mating Post Length 5.00 5.00 5.00 5.00 5.75 5.75 5.75 5.75 6.50 6.50 6.50 6.50 7.25 7.25 7.25 7.25 8.00 8.00 8.00 8.00 6.50 7.25 Press-Fit Letter Code BB FF GG HH MM NN PP RR SS TT UU VV WW XX YY ZZ DA DB DC Lead Length 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 4.25 11.80 15.60 17.00 13.60 13.60 A Solder Letter Code BO BQ BX BY BZ B C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 D Mating Post Length 0.75 5.75 5.00 8.25 8.25 7.00 8.25 7.00 8.00 7.00 5.75 8.00 5.75 5.00 8.00 6.5 5.00 7.25 7.25 5.00 5.75 6.50 7.25 8.00 Lead Length 12.95 12.95 13.60 13.60 4.25 4.25 17.00 17.00 13.60 13.60 13.60 14.90 14.90 14.90 17.70 16.30 16.30 16.30 14.40 3.20 3.20 3.20 3.20 3.20 E A 30 60 120 150 B 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 C D E 180 210 240 270 300 330 16 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 8.80 ±0.08 Dim. B 20.45 2.25 Max. (Point of Contact) 11.30±0.1 2.73 ±0.08 Typ. Right-Angle Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads +0.1 0.5 -0 0.55 -±0.05 4 Row, Signal Modules, Right-Angle Receptacle Assemblies Material and Finish: 8.80 ±0.08 +0.1 0.5 -0 0.55 -±0.05 Related Product Data: 3 Spaces at 2.00 = 6.00 9.50 Ref. 20.45 2.25 Max. (Point of Contact) 3.55 ±0.03 Typ. 1.00 Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating 5.00 12.00 Typ. 4.00 Technical Documents (page 2): 1.00 11.30±0.1 Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 +0.10 2.05 -0.00 Dia. Typ. Drilled Hole 3 Spaces at 2.00 = 6.00 +0.10 -0.00 3.00 ±0.15 Dia. Typ. (Drilled Hole) 4.00 1.50 1.00 Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 Electrical Performance Report 65476 9.50 Ref. 3 Spaces at 2.00 = 6.00 Dim. B 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) 4 Row Select Load R/A Receptacle Assemblies Note: Right angle receptacles can be select loaded by column. Consult Tyco Electronics for loading patterns and part numbers. Right-Angle Receptacle Assemblies Part Numbers with Solder Leads Dimensions No. of Positions A B 2.73 Lead Length 3.53 Lead Length with 3.55 Press-Fit Leads 24 48 72 96 120 144 168 192 216 240 264 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 536507-1 536507-2 1-536507-1 536507-3 536507-6 536507-7 536507-5 536507-4 536507-9 536507-8 1-536507-0 536510-1 536510-2 — 536510-3 536510-6 536510-5 536510-7 536510-4 536510-9 536510-8 1-536510-0 536511-1 536511-2 1-536511-2 536511-3 536511-6 536511-5 536511-8 536511-4 1-536511-0 536511-9 1-536511-1 Seating Tooling Industry Standard Flat Rock Note: Contact Tyco Electronics for additional sizes. Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 17 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Dim. B 0.55 -±0.05 Right-Angle Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads +0.1 0.5 -0 5 Row, Signal Modules, Right-Angle Receptacle Assemblies 20.45 2.25 Max. (Point of Contact) 9.50 Ref. 4 Spaces at 2.00 = 8.00 with Solder Leads 2.73 ±0.08 Typ. 1.50 Ref. Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. 1.00 Material and Finish: 10.80 Ref. Row E Row D Row C 11.30±0.1 Row B Row A 4.00±0.05 6.00±0.05 8.00±0.05 10.00±0.05 12.00±0.05 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 1.00 Technical Documents (page 2): 3.00 ±0.15 22.45 2.25 Max. (Point of Contact) 4.00 10.80 Ref. 12.00 Typ. 4.00 +0.10 1.50 -0.00 Dia. Typ. (Drilled Hole) 0.55 -±0.05 +0.10 -0.00 Dia. Typ. Drilled Hole 2.05 +0.1 0.5 -0 5.00 Dim. B 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) 1.00 3.55 ±0.3 Typ. 4 Spaces at 2.00 = 8.00 1.50 Ref. 13.30±0.1 Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 Electrical Performance Report 1242176 9.50 Ref. 4 Spaces at 2.00 = 8.00 with Press Fit Leads Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) 5 Row Select Load R/A Receptacle Assemblies Note: Right angle receptacles can be select loaded by column. Consult Tyco Electronics for loading patterns and part numbers. Right-Angle Receptacle Assembies Number of Positions 30 60 90 120 150 180 210 240 270 300 330 Dimensions A B 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 107.88 119.88 131.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 106.00 118.00 130.00 Part Numbers with Solder Leads 2.73 Lead 3.53 Lead Length Length 223004-1 223004-2 223004-3 223004-4 223004-5 223004-6 223004-7 223004-8 223004-9 1-223004-0 1-223004-1 223007-1 223007-2 223007-3 223007-4 223007-5 223007-6 223007-7 223007-8 223007-9 1-223007-0 1-223007-1 with Press-Fit Leads 3.55 223008-1 223008-2 223008-3 223008-4 223008-5 223008-6 223008-7 223008-8 223008-9 1-223008-0 1-223008-1 Seating Tooling Industry Standard Flat Rock Tooling Note: Contact Tyco Electronics for additional sizes. Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 18 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Signal Modules, Vertical Receptacle Assemblies Vertical Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads Dim. B Material and Finish: Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. Row D Row C Row B Row A 13.80 2.00 +0.1 0.50 -0.0 Dim. A 0.55 ±0.05 1.00 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 2.25 Max. (Point of Contact) 14.30 3 Spaces at 2.00 = 6.00 1.65 4.25±0.30 Typ. Technical Documents (page 2): Product Specification 108-1441 0.725 ±0.075 Application Specification Dia. Typ. 114-1075 (Plated-Thru Hole) Instruction Sheet 408-6927 Electrical Performance Report 65476 Dim. B 3 Spaces at 2.00 = 6.00 Vertical Receptacle Assembies Part Numbers with Solder Leads Dimensions No. of Positions A B 3.20 Lead Length 4.25 Lead Length with 4.25 Press-Fit Leads 24 48 72 96 120 144 168 192 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 223660-1 223660-2 223660-3 223660-4 223660-5 223660-6 223660-7 223660-8 223655-1 223655-2 223655-3 223655-4 223655-5 223655-6 223655-7 223655-8 223650-1 223650-2 223650-3 223650-4 223650-5 223650-6 223650-7 223650-8 Seating Tooling Industry Standard Flat Rock Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 19 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Signal Modules, Vertical Receptacle Assemblies Vertical Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads Dim. B Material and Finish: Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. Row E Row D Row C Row B Row A 15.60 Ref. 2.00 +0.1 0.50 -0.0 13.30±0.10 0.55 ±0.05 Dim. A 2.25 Max. (Point of Contact) 1.00 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 14.30 Ref. 4 Spaces at 2.00 = 8.00 2.65 4.25±0.30 Typ. Technical Documents (page 2): Dim. B Product Specification 0.725 ±0.075 108-1441 Dia. Typ. (Plated-Thru Hole) Application Specification 114-1075 Instruction Sheet 408-6927 Electrical Performance Report 1242176 3 Spaces at 2.00 = 6.00 Vertical Receptacle Assemblies Part Numbers Dimensions No. of Positions A B 4.25 Lead Length Solder Leads 30 60 90 120 150 180 210 240 11.88 23.88 35.88 47.88 59.88 71.88 83.88 95.88 10.00 22.00 34.00 46.00 58.00 70.00 82.00 94.00 223657-1 223657-2 223657-3 223657-4 223657-5 223657-6 223657-7 223657-8 with Press Fit Leads 3.20 Lead Length 4.25 Leads 13.60 Leads 223668-1 223668-2 223668-3 223668-4 223668-5 223668-6 223668-7 223668-8 223652-1 223652-2 223652-3 223652-4 223652-5 223652-6 223652-7 223652-8 223661-1 223661-2 223661-3 223661-4 223661-5 223661-6 223661-7 223661-8 Seating Tooling Industry Standard Flat Rock Tooling Part Numbers shown are tin-lead plated part numbers. See pages 31-33 for RoHS Compliant Part Numbers. 20 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Power Modules, Vertical Pin Assemblies 16mm Wide Body Pin Assemblies with Solder Leads and Compliant Press-Fit Leads (8 Positions) 15.80 11.50 Rows A B C D Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. 13.60 17.00 11.83 Mating Post Length (See Chart Below.) 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Lead Length (See Chart Below) 4.001 3 Spaces at 2.00 = 6.00 Related Product Data: 3 Spaces at 2.00 = 6.00 Solder Leads Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 12.001 11.50 +0.101 -0.00 Dia. Typ. (Drilled Hole) 1.50 10.00 Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-4157 Rows A B C D 13.60 3.40 Dimensions apply to solder lead versions only. 1 Mating Post Length (See Chart Below.) 4.25 (Lead Length) End View 3 Spaces at 2.00 = 6.00 Compliant Press-Fit Leads Vertical Pin Assembly No. of Positions Mating Post Lengths 8 6.50 7.25 8.00 4.25 Solder Leads 536600-1 536625-1 536623-1 Part Numbers 3.2 Solder Press-Fit Leads Leads 536628-1 536603-1 — — — 536620-1 Seating Tooling 58512-1 Note: Seating Tooling applicable to all 8 position power headers. Contact Tyco Electronics for additional sizes (>8 positions). *For contact load variations (sequenced or select-load pins), use worksheets on page 23 to define your requirements. 21 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 5 Row, Power Modules, Vertical Pin Assemblies 13.50 18mm Wide Body Pin Assemblies with Solder Leads and Compliant Press-Fit Leads (8 Positions) 17.80 Rows A B C D E 3.40 13.60 Material and Finish: Housing — Liquid crystal polymer Pin Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. Lead Length (See chart below) 4 Spaces at 2.00 = 8.00 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Solder Leads 4.001 13.50 4 Spaces at 2.00 = 8.00 Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 Rows 14.001 A B C D E +0.101 -0.00 Dia. Typ. (Drilled Hole) 1.50 10.00 Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927, 408-4488 Mating Post Length (See chart below) 11.88 Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Dimensions apply to solder lead versions only. 1 13.60 Mating Post Length (See Chart Below.) 3.40 Ref. 4.25 Ref. 4 Spaces at 2.00 = 8.00 Compliant Press-Fit Leads Vertical Pin Assemblies Number of Positions Mating Post Length 10 6.5 8.0 Part Numbers Press-Fit Leads 536642-1 536642-7 Seating Tooling 1214224-1 Note: Seating Tooling applicable to all 10 position power headers. Contact Tyco Electronics for additional sizes (>10 positions). *For contact load variations (sequenced or select-load pins), use worksheets on page 23 to define your requirements. 22 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Worksheet for Sequencing 4 Row Power Pin Headers Press-Fit Letter Code AA AB AC AD Solder Letter Code CA CB CC CD CE CF Mating Post Length 6.50 7.25 8.00 5.00 6.50 7.25 8.00 6.50 7.25 8.00 Lead Length 4.25 4.25 4.25 4.25 4.25 4.25 4.25 3.20 3.20 3.20 Fill in the Matrix below for the power module loading pattern and forward to your Tyco Electronics Sales Engineer. A B C D 1 2 Position A1 Worksheet for Sequencing 5 Row Power Pin Headers Press-Fit Letter Code AA AB AC AD Solder Letter Code CA CB CC CD CE CF Mating Post Length 6.50 7.25 8.00 5.00 6.50 7.25 8.00 6.50 7.25 8.00 Lead Length 4.25 4.25 4.25 4.25 4.25 4.25 4.25 3.20 3.20 3.20 Fill in the Matrix below for the power module loading pattern and forward to your Tyco Electronics Sales Engineer. A B C D E 1 2 Position A1 23 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 4 Row, Power Modules, Right-Angle Receptacle Assemblies Right-Angle Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads (8 Positions) 3.56 ±0.3 Typ. Material and Finish: Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. 8.8 ±0.08 2.25 Max. (Point of Contact) +0.1 0.5 -0 11.30 ±0.1 20.45 9.50 3 Spaces at 2.00 = 6.00 Ref. Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 1.00 +0.10 -0.00 Dia. Typ. Drilled Hole 2.05 +0.10 -0.00 Dia. Typ. (Drilled Hole) 3.00 ±0.15 1.50 12.00 Typ. 4.00 Technical Documents (page 2): 1.00 Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 4.00 3 Spaces at 2.00 = 6.00 2.00 Typ. 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Right-Angle Receptacle Assemblies Part Numbers No. of Positions 8 with Solder Leads 2.73 Lead Length 3.53 Lead Length with 3.56 Press-Fit Leads Seating Tooling 536607-1 536613-1 536614-1 Industry Standard Flat Rock 24 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors 10.8 ±0.08 22.45 2.25 Max. (Point of Contact) 3.56 ±0.3 Typ. 6.00 +0.1 0.5 -0 Right-Angle Receptacle Assemblies with Solder Leads and Compliant Press-Fit Leads (10 Positions) 13.30 ±0.1 5 Row, Power Modules, Right-Angle Receptacle Assemblies Material and Finish: Housing — Liquid crystal polymer Receptacle Contacts — Phosphor bronze, mating surface plating conforms to all testing specified for Telcordia Uncontrolled Environment, with entire contact underplated with 0.00127 min. nickel. See customer drawing for specific lead plating. 9.50 4 Spaces at 2.00 = 8.00 Ref. Related Product Data: Material Specifications — page 27 Performance/Test Level Data — page 27 Compliant Press-Fit Contact Specifications — page 28 Application Tooling — page 29, 30 1.00 2.00 Typ. Technical Documents (page 2): Product Specification 108-1441 Application Specification 114-1075 Instruction Sheets 408-6927 +0.10 -0.00 Dia. Typ. (Drilled Hole) 1.50 5 Spaces at 2.00 = 10.00 Ref. +0.10 2.05 -0.00 Dia. Typ. Drilled Hole 0.725 ±0.075 Dia. Typ. (Plated-Thru Hole) 1.00 4.00 Typ. 3.00±0.15 4 Spaces at 2.00 = 8.00 Ref. 4.00 Recommended PC Board Hole Layout per IPC-D-300, Type II, Class C (Component Side) Right-Angle Receptacle Assemblies Part Number No. of Positions 10 with Solder Leads 2.73 Lead Length 3.53 Lead Length 223092-1 223093-1 with 3.56 Press-Fit Leads Seating Tooling 536649-1 Industry Standard Flat Rock 25 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Unshielded Cable Connectors Product Facts ■ Available in 4 row 24 position and 5 row 30 position ■ Intermateable with 4 row / 5 row FB+ male headers ■ End-to-end stackable without losing contacts ■ Contacts are IDC for AWG26-24 or IDC for AWG 30-26 ■ Max. cable diameter: ■ 24 position – 6.2mm max ■ 30 position – 7.5 mm max Related Product Data: Mating Connectors: Z-PACK 2mm FB 5 Row Z-PACK 2mm FB 4 Row Technical Documents: Product Specification 108-19196 Application Specification 114-19047 Application Tooling: Champomator 2.5 P/N 1-354786-9 Pistol Grip P/N 1490375-1 Part Number 1-338919-1 338919-1 1-338914-1 338914-1 Kit Description 30 Position Connector 30 Position Connector 24 Position Connector 24 Position Connector Wire Size AWG 26-24 AWG 30-26 AWG 26-24 AWG 30-26 Packaging Unit 500 pieces 500 pieces 500 pieces 500 pieces 26 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Performance/Test Level Data and Material Specifications Performance/Test Level Data Complete information regarding the computer-simulated noise voltage analysis of the Z-PACK 2mm FB (Futurebus+) Connector (2mm [.079] centerline, four-row, right-angle, through-hole mount) is provided in Tyco Electronics Electrical Performance Report 65476. Temperature: -55° to 105°C Current Rating at 70°C continuous Signal Contacts: 1 Amp Power Contacts: 4-6 Amp Voltage: 300 VAC Material Specifications Liquid Crystal Polymer: per ASTM D5138 LCP000 G30A 32250 UL 94VO Rated Phosphor Bronze: per UNS Alloy No. C51100 Gold: per ASTM B571 & ASTM B488 Palladium-Nickel: per Tyco Electronics Specification Tin-Lead: per ASTM B571 Nickel: per QQ-N-290, Class 2 Tin: per ASTM B545 Mechanical Operations Performance Level Number of Operations Insertion Forces 1 250 min. Withdrawal Forces Signal Contacts: 0.70N per contact max. Power Contacts: 2.4N per contact max. 0.12N per contact min. 0.30N per contact min. 27 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors AMP Press-Fit Contacts Press-Fit contacts provide a reliable press-fit connection. Localized pressure in the interface area provides oxide breakthrough and prevents corrosion in the harshest environments to enhance the reliability of the connection. Also, radial and axial distortion are controlled to meet today’s standards for multilayer board applications. PC Board Thickness Press-Fit contacts are designed for use in a variety of PC board thicknesses. To ensure optimum performance, the minimum board thicknesses called out below must be used. ➀ Annular Ring (See Note) ➁ Drilled Hole ➂ Copper Thickness ➃ Tin-Lead Thickness ➄ Plated-Through Hole Press-Fit Contact/PC Board Applications Connector (Contact) Type Press-Fit Contact Minimum Board Material Thickness Thickness Plating Thicknesses Drilled Hole Diameter ➁ Copper ➂ Tin-Lead ➃ Plated-Through Hole Diameter ➄ 1 Radial Hole Distortion Average Maximum Receptacle Assemblies 1.30 0.355 0.81-0.86 0.025 min. 0.015 max. 0.65-0.80 0.038 0.05 Pin Assemblies 2.40 0.50 0.81-0.86 0.025 min. 0.015 max. 0.65-0.80 0.038 0.05 Maximum hardness of copper layer is 150 Knoop 1 Note: Recommended annular ring diameter is hole diameter plus 0.51 28 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Application Tooling for Vertical Pin Assemblies with Compliant Press-Fit Leads (Signal and Power Modules) Z-PACK vertical pin assemblies use compliant lead contacts to allow fast, solderless backplane construction through reliable press-fit application. Pin Contact Replacement Kit: 354687-1 Instruction Sheet 408-9979 Typical Seating Tool Press-fitting these connectors to PC boards requires special seating tools that transfer the application force directly to the contacts. Z-PACK Pin Assembly The force applied to the tool to seat the connectors requires power applicators such as Tyco Electronics seating machines shown below. Board support fixtures are used to support PC boards or backplanes while connectors are being assembled to the boards or backplanes. Tyco Electronics Instruction Sheet 408-6927 provides Tyco Electronics recommendations for manufacturing board support fixtures. For more tooling information, call the Tooling Assistance Center: 1-800-722-1111. PC Board Board Support Fixture (Customer Supplied, see AMP Instruction Sheet 408-6927.) Receptacle Tooling: A customer supplied tool, or an AMP arbor tool or pneumatic machine with a flat bearing surface is needed to push both the press pegs and Press-Fit contacts into printed circuit boards. Bottom support tooling is available to support the leads and press pegs that extend through the printed circuit board: Instruction Sheet 408-4038 Part Number 679980-1 679980-2 679977-1 679977-2 Description Fixture for up to 230 wide board Fixture for up to 460 board Bottom support anvil—12.7 long Bottom support anvil—49.2 long Definition of Flat-Rock Tooling: Commercially available bar stock with a flat surface large enough to cover the top surface of right-angle connectors and capable of exerting 67N per pin. Can be used as a push bar to seat the compliant pin and solder tine right-angle connectors on the pc board. The same type tooling can be used to remove damaged right-angle connectors from a pc board by pressing evenly on the compliant end of the contacts. SM-10/20 Machine No. 803880-6 SM-3 Machine No. 814700-2 This machine is hydraulically operated with a capacity of 178 000 N which is adequate for seating large connectors or multiple smaller connectors. Each contact requires 89 N for insertion. Cycling time is approximately 2 to 2-1/2 seconds. This air-powered machine has a capacity of 26 700 N, which is adequate for individual Z-PACK modules. This unit has a pressure response mode and a board sensor mode which compensate for variations in board thicknesses. Cycle time is approximately 4 seconds. Pin Repair Kit Part No. 354687-1 for Z-PACK 2mm HM and FB Pin Contacts Instruction Sheet 408-9979 29 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Application Tooling for Vertical Pin Assemblies with Compliant Press-Fit Leads (Signal and Power Modules) (Continued) 4 Row Pin Assembly Signal Module Power Module Part Number 58511-1 58511-2 58511-3 58511-4 58511-5 58511-6 58511-7 58511-8 58511-9 1-58511-0 1-58511-4 Seating Tools Position 24 48 96 192 144 120 168 216 240 264 72 Part Number 58512-1 58512-2 Position 8 16 Instruction Sheet 408-4157 Instruction Sheet 408-9910 5 Row Pin Assembly Signal Module Power Module Part Number 318860-1 318860-2 318860-3 318860-4 318860-5 318860-6 318860-7 318860-8 318860-9 1-318860-0 1-318860-1 Seating Tools Position 30 60 90 120 150 180 210 240 270 300 330 Part Number 1214224-1 Position 10 Instruction Sheet 408-4488 Instruction Sheet 408-4250 Part Number Index Note: This part number index lists all cataloged parts by base number only. Complete part numbers (with prefixes and/or suffixes) are shown on the pages indicated. Part Number 58511 58512 223000 223002 223004 223007 223008 223010 223011 223013 223016 223017 223018 223019 223020 223021 223041 223055 223092 223093 223513 223514 223524 223604 223633 223650 223652 223655 223657 Page Number 2,6,9,30 2,21,30 8 8 18 18 18 8 8 8 8 8 8 10 10 10 12 10 25 25 13 13 14 9 9 19 20 19 20 Part Number 223660 223661 223668 318860 338919 354687 354786 536501 536504 536507 536510 536511 536513 536514 536515 536524 536526 536531 536532 536533 536536 536542 536549 536551 536565 536600 536603 536607 536613 Page Number 19 20 20 2,8,10,30 26 2,29 26 6 6 17 17 17 6 6 6 6 9 9 9 9 6 6 6 6 11 21 21 24 24 Part Number 536614 536620 536623 536625 536628 536642 536649 679977 679980 803880 814700 1214224 1490375 Page Number 24 21 21 21 21 22 25 29 2,29 29 29 2,22,30 26 30 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference (including tin-lead) Non-RoHS Part Number 223000-1 223000-2 223000-3 223000-4 223000-5 223000-6 223000-7 223000-8 223000-9 1-223000-0 1-223000-1 223002-1 223002-2 223002-3 223002-4 223002-5 223002-6 223002-7 223002-8 223002-9 1-223002-0 1-223002-1 223004-1 223004-2 223004-3 223004-4 223004-5 223004-6 223004-7 223004-8 223004-9 1-223004-0 1-223004-1 223007-1 223007-2 223007-3 223007-4 223007-5 223007-6 223007-7 223007-8 223007-9 1-223007-0 1-223007-1 223008-1 223008-2 223008-3 223008-4 223008-5 223008-6 223008-7 223008-8 223008-9 1-223008-0 1-223008-1 223010-1 223010-2 223010-4 223010-8 223011-1 223011-2 223011-4 223011-8 223012-5 223013-1 223013-2 223013-4 223013-6 223013-7 223013-8 1-223013-0 RoHS Compliant Part Number 5223000-1 5223000-2 5223000-3 5223000-4 5223000-5 5223000-6 5223000-7 5223000-8 5223000-9 1-5223000-0 1-5223000-1 5223002-1 5223002-2 5223002-3 5223002-4 5223002-5 5223002-6 5223002-7 5223002-8 5223002-9 1-5223002-0 1-5223002-1 5223004-1 5223004-2 5223004-3 5223004-4 5223004-5 5223004-6 5223004-7 5223004-8 5223004-9 1-5223004-0 1-5223004-1 5223007-1 5223007-2 5223007-3 5223007-4 5223007-5 5223007-6 5223007-7 5223007-8 5223007-9 1-5223007-0 1-5223007-1 5223008-1 5223008-2 5223008-3 5223008-4 5223008-5 5223008-6 5223008-7 5223008-8 5223008-9 1-5223008-0 1-5223008-1 5223010-1 5223010-2 5223010-4 5223010-8 5223011-1 5223011-2 5223011-4 5223011-8 5223012-5 5223013-1 5223013-2 5223013-4 5223013-6 5223013-7 5223013-8 1-5223013-0 Non-RoHS Part Number 1-223013-1 223014-1 223016-1 223016-2 223016-3 223016-4 223016-5 223016-6 223016-7 223016-8 223016-9 1-223016-0 1-223016-1 223017-1 223017-2 223017-4 223017-8 223018-1 223018-2 223018-4 223018-8 223019-1 223019-2 223019-4 223019-8 223020-1 223020-2 223020-4 223020-8 223021-1 223021-2 223021-4 223021-8 223022-1 223028-1 223028-4 223029-1 223030-1 223031-1 223031-2 223031-3 223031-4 223033-1 223033-2 223033-4 223034-1 223035-1 223035-2 223036-1 223038-2 223039-1 223039-2 223039-3 223039-4 223039-9 223044-1 223045-9 1-223045-0 1-223045-1 223046-9 1-223046-0 1-223046-1 223052-1 223052-2 223052-3 223052-4 223052-5 223052-6 223052-9 223055-1 223055-2 RoHS Compliant Part Number 1-5223013-1 5223014-1 5223016-1 5223016-2 5223016-3 5223016-4 5223016-5 5223016-6 5223016-7 5223016-8 5223016-9 1-5223016-0 1-5223016-1 5223017-1 5223017-2 5223017-4 5223017-8 5223018-1 5223018-2 5223018-4 5223018-8 5223019-1 5223019-2 5223019-4 5223019-8 5223020-1 5223020-2 5223020-4 5223020-8 5223021-1 5223021-2 5223021-4 5223021-8 5223022-1 5223028-1 5223028-4 5223029-1 5223030-1 5223031-1 5223031-2 5223031-3 5223031-4 5223033-1 5223033-2 5223033-4 5223034-1 5223035-1 5223035-2 5223036-1 5223038-2 5223039-1 5223039-2 5223039-3 5223039-4 5223039-9 5223044-1 5223045-9 1-5223045-0 1-5223045-1 5223046-9 1-5223046-0 1-5223046-1 5223052-1 5223052-2 5223052-3 5223052-4 5223052-5 5223052-6 5223052-9 5223055-1 5223055-2 Non-RoHS Part Number 223055-4 223055-8 223058-2 223058-3 223058-6 223061-1 223062-1 223064-1 223070-1 223070-4 223071-2 223074-1 223074-3 223074-7 223077-1 223080-1 223080-2 223080-3 223080-4 223080-5 223080-6 223080-7 223080-9 1-223080-0 1-223080-3 1-223080-4 1-223080-5 1-223080-6 1-223080-7 2-223080-0 2-223080-1 2-223080-7 2-223080-8 3-223080-2 3-223080-3 3-223080-4 3-223080-7 3-223080-8 3-223080-9 4-223080-0 4-223080-1 4-223080-2 4-223080-3 4-223080-7 5-223080-3 5-223080-6 5-223080-7 5-223080-8 6-223080-7 223081-1 223081-2 223081-3 223081-4 223081-5 223081-6 223081-7 223081-8 223081-9 1-223081-0 1-223081-2 2-223081-4 2-223081-6 2-223081-8 2-223081-9 3-223081-0 3-223081-1 3-223081-2 3-223081-5 4-223081-3 4-223081-6 4-223081-8 RoHS Compliant Part Number 5223055-4 5223055-8 5223058-2 5223058-3 5223058-6 5223061-1 5223062-1 5223064-1 5223070-1 5223070-4 5223071-2 5223074-1 5223074-3 5223074-7 5223077-1 5223080-1 5223080-2 5223080-3 5223080-4 5223080-5 5223080-6 5223080-7 5223080-9 1-5223080-0 1-5223080-3 1-5223080-4 1-5223080-5 1-5223080-6 1-5223080-7 2-5223080-0 2-5223080-1 2-5223080-7 2-5223080-8 3-5223080-2 3-5223080-3 3-5223080-4 3-5223080-7 3-5223080-8 3-5223080-9 4-5223080-0 4-5223080-1 4-5223080-2 4-5223080-3 4-5223080-7 5-5223080-3 5-5223080-6 5-5223080-7 5-5223080-8 6-5223080-7 5223081-1 5223081-2 5223081-3 5223081-4 5223081-5 5223081-6 5223081-7 5223081-8 5223081-9 1-5223081-0 1-5223081-2 2-5223081-4 2-5223081-6 2-5223081-8 2-5223081-9 3-5223081-0 3-5223081-1 3-5223081-2 3-5223081-5 4-5223081-3 4-5223081-6 4-5223081-8 Non-RoHS Part Number 4-223081-9 5-223081-0 223082-1 223082-3 223083-1 223083-2 223083-3 223083-6 223083-7 223083-8 1-223083-0 1-223083-1 1-223083-2 1-223083-3 1-223083-4 1-223083-5 1-223083-6 1-223083-7 1-223083-8 1-223083-9 2-223083-0 2-223083-3 2-223083-5 2-223083-6 2-223083-7 2-223083-9 3-223083-0 3-223083-1 3-223083-2 3-223083-3 3-223083-4 3-223083-5 3-223083-6 3-223083-7 3-223083-9 223084-1 223085-1 223087-7 223087-8 1-223087-2 1-223087-3 1-223087-4 1-223087-5 1-223087-6 2-223087-2 2-223087-3 223088-5 223089-1 223089-3 223090-1 223090-2 223090-3 223090-4 223090-7 223091-1 223096-1 223096-3 223096-4 223100-1 223100-2 223109-1 223110-1 223110-8 223112-1 223112-2 223114-1 223115-1 223116-1 1-223117-1 223118-8 223121-7 RoHS Compliant Part Number 4-5223081-9 5-5223081-0 5223082-1 5223082-3 5223083-1 5223083-2 5223083-3 5223083-6 5223083-7 5223083-8 1-5223083-0 1-5223083-1 1-5223083-2 1-5223083-3 1-5223083-4 1-5223083-5 1-5223083-6 1-5223083-7 1-5223083-8 1-5223083-9 2-5223083-0 2-5223083-3 2-5223083-5 2-5223083-6 2-5223083-7 2-5223083-9 3-5223083-0 3-5223083-1 3-5223083-2 3-5223083-3 3-5223083-4 3-5223083-5 3-5223083-6 3-5223083-7 3-5223083-9 5223084-1 5223085-1 5223087-7 5223087-8 1-5223087-2 1-5223087-3 1-5223087-4 1-5223087-5 1-5223087-6 2-5223087-2 2-5223087-3 5223088-5 5223089-1 5223089-3 5223090-1 5223090-2 5223090-3 5223090-4 5223090-7 5223091-1 5223096-1 5223096-3 5223096-4 5223100-1 5223100-2 5223109-1 5223110-1 5223110-8 5223112-1 5223112-2 5223114-1 5223115-1 5223116-1 1-5223117-1 5223118-8 5223121-7 31 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference (including tin-lead) Non-RoHS Part Number 223123-1 1-223124-1 223125-2 223135-2 223143-3 223150-4 223154-1 223504-1 223505-2 223505-3 223512-3 223513-1 223513-2 223513-3 223513-4 223513-5 223513-6 223513-7 223513-8 223514-1 223514-2 223514-3 223514-4 223514-5 223514-6 223515-1 223515-2 223515-3 223520-3 223520-6 223524-1 223524-2 223524-3 223524-4 223524-5 223524-6 223524-7 223532-1 223535-1 223536-1 223542-1 223549-1 223550-1 223600-3 223601-1 223603-3 223604-2 223610-3 223610-6 223610-7 1-223610-1 1-223610-4 1-223610-5 1-223610-6 1-223610-7 2-223610-0 2-223610-3 2-223610-4 2-223610-5 2-223610-6 2-223610-7 5-223610-0 5-223610-1 5-223610-3 5-223610-5 5-223610-8 5-223610-9 6-223610-0 6-223610-1 6-223610-3 6-223610-4 RoHS Compliant Part Number 5223123-1 1-5223124-1 5223125-2 5223135-2 5223143-3 5223150-4 5223154-1 5223504-1 5223505-2 5223505-3 5223512-3 5223513-1 5223513-2 5223513-3 5223513-4 5223513-5 5223513-6 5223513-7 5223513-8 5223514-1 5223514-2 5223514-3 5223514-4 5223514-5 5223514-6 5223515-1 5223515-2 5223515-3 5223520-3 5223520-6 5223524-1 5223524-2 5223524-3 5223524-4 5223524-5 5223524-6 5223524-7 5223532-1 5223535-1 5223536-1 5223542-1 5223549-1 5223550-1 5223600-3 5223601-1 5223603-3 5223604-2 5223610-3 5223610-6 5223610-7 1-5223610-1 1-5223610-4 1-5223610-5 1-5223610-6 1-5223610-7 2-5223610-0 2-5223610-3 2-5223610-4 2-5223610-5 2-5223610-6 2-5223610-7 5-5223610-0 5-5223610-1 5-5223610-3 5-5223610-5 5-5223610-8 5-5223610-9 6-5223610-0 6-5223610-1 6-5223610-3 6-5223610-4 Non-RoHS Part Number 6-223610-6 6-223610-7 6-223610-8 6-223610-9 7-223610-0 7-223610-1 223611-1 223611-4 223611-5 223611-7 223611-8 223611-9 1-223611-6 2-223611-8 2-223611-9 3-223611-0 3-223611-1 3-223611-2 3-223611-3 3-223611-4 3-223611-5 223613-1 223613-2 223613-3 1-223613-5 1-223613-6 1-223613-7 1-223613-8 1-223613-9 4-223613-0 4-223613-1 4-223613-3 4-223613-5 4-223613-6 4-223613-7 223614-1 223614-2 223614-4 223615-1 223616-1 223616-2 223617-3 223617-4 223617-7 223617-8 1-223617-0 1-223617-1 1-223617-2 1-223617-3 1-223617-4 1-223617-5 4-223617-7 4-223617-8 5-223617-0 5-223617-1 5-223617-2 5-223617-3 5-223617-4 223627-1 223632-2 223633-1 223633-2 223633-3 223650-1 223650-2 223650-3 223650-4 223650-5 223650-6 223650-7 223650-8 RoHS Compliant Part Number 6-5223610-6 6-5223610-7 6-5223610-8 6-5223610-9 7-5223610-0 7-5223610-1 5223611-1 5223611-4 5223611-5 5223611-7 5223611-8 5223611-9 1-5223611-6 2-5223611-8 2-5223611-9 3-5223611-0 3-5223611-1 3-5223611-2 3-5223611-3 3-5223611-4 3-5223611-5 5223613-1 5223613-2 5223613-3 1-5223613-5 1-5223613-6 1-5223613-7 1-5223613-8 1-5223613-9 4-5223613-0 4-5223613-1 4-5223613-3 4-5223613-5 4-5223613-6 4-5223613-7 5223614-1 5223614-2 5223614-4 5223615-1 5223616-1 5223616-2 5223617-3 5223617-4 5223617-7 5223617-8 1-5223617-0 1-5223617-1 1-5223617-2 1-5223617-3 1-5223617-4 1-5223617-5 4-5223617-7 4-5223617-8 5-5223617-0 5-5223617-1 5-5223617-2 5-5223617-3 5-5223617-4 5223627-1 5223632-2 5223633-1 5223633-2 5223633-3 5223650-1 5223650-2 5223650-3 5223650-4 5223650-5 5223650-6 5223650-7 5223650-8 Non-RoHS Part Number 223652-1 223652-2 223652-3 223652-4 223652-5 223652-6 223652-7 223652-8 223655-1 223655-2 223655-3 223655-4 223655-5 223655-6 223655-7 223655-8 223657-1 223657-2 223657-3 223657-4 223657-5 223657-6 223657-7 223657-8 223660-1 223660-2 223660-3 223660-4 223660-5 223660-6 223660-7 223660-8 223661-1 223661-2 223661-3 223661-4 223661-5 223661-6 223661-7 223661-8 223663-1 223667-1 223667-2 223668-1 223668-2 223668-3 223668-4 223668-5 223668-6 223668-7 223668-8 223678-1 223683-8 223685-2 223685-3 223685-4 223691-1 223691-2 223691-3 223691-4 223698-1 223698-8 223700-1 223701-1 223702-1 223703-1 223751-1 536501-1 536501-2 536501-3 536501-4 RoHS Compliant Part Number 5223652-1 5223652-2 5223652-3 5223652-4 5223652-5 5223652-6 5223652-7 5223652-8 5223655-1 5223655-2 5223655-3 5223655-4 5223655-5 5223655-6 5223655-7 5223655-8 5223657-1 5223657-2 5223657-3 5223657-4 5223657-5 5223657-6 5223657-7 5223657-8 5223660-1 5223660-2 5223660-3 5223660-4 5223660-5 5223660-6 5223660-7 5223660-8 5223661-1 5223661-2 5223661-3 5223661-4 5223661-5 5223661-6 5223661-7 5223661-8 5223663-1 5223667-1 5223667-2 5223668-1 5223668-2 5223668-3 5223668-4 5223668-5 5223668-6 5223668-7 5223668-8 5223678-1 5223683-8 5223685-2 5223685-3 5223685-4 5223691-1 5223691-2 5223691-3 5223691-4 5223698-1 5223698-8 5223700-1 5223701-1 5223702-1 5223703-1 5223751-1 5536501-1 5536501-2 5536501-3 5536501-4 Non-RoHS Part Number 536501-5 536501-6 536501-7 536501-8 536501-9 1-536501-0 1-536501-1 536504-1 536504-2 536504-3 536504-4 536504-5 536504-6 536504-8 536504-9 1-536504-0 1-536504-1 1-536504-2 536507-1 536507-2 536507-3 536507-4 536507-5 536507-6 536507-7 536507-8 536507-9 1-536507-0 1-536507-1 536510-1 536510-2 536510-3 536510-4 536510-5 536510-6 536510-7 536510-8 536510-9 1-536510-0 536511-1 536511-2 536511-3 536511-4 536511-5 536511-6 536511-8 536511-9 1-536511-0 1-536511-1 1-536511-2 536513-1 536513-2 536513-3 536513-4 536513-5 536514-1 536514-2 536514-3 536514-4 536514-5 536514-6 536515-1 536515-2 536515-3 536515-4 536520-1 536524-1 536524-2 536524-3 536524-4 536524-6 RoHS Compliant Part Number 5536501-5 5536501-6 5536501-7 5536501-8 5536501-9 1-5536501-0 1-5536501-1 5536504-1 5536504-2 5536504-3 5536504-4 5536504-5 5536504-6 5536504-8 5536504-9 1-5536504-0 1-5536504-1 1-5536504-2 5536507-1 5536507-2 5536507-3 5536507-4 5536507-5 5536507-6 5536507-7 5536507-8 5536507-9 1-5536507-0 1-5536507-1 5536510-1 5536510-2 5536510-3 5536510-4 5536510-5 5536510-6 5536510-7 5536510-8 5536510-9 1-5536510-0 5536511-1 5536511-2 5536511-3 5536511-4 5536511-5 5536511-6 5536511-8 5536511-9 1-5536511-0 1-5536511-1 1-5536511-2 5536513-1 5536513-2 5536513-3 5536513-4 5536513-5 5536514-1 5536514-2 5536514-3 5536514-4 5536514-5 5536514-6 5536515-1 5536515-2 5536515-3 5536515-4 5536520-1 5536524-1 5536524-2 5536524-3 5536524-4 5536524-6 32 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference (including tin-lead) Non-RoHS Part Number 536524-9 536526-1 536526-2 536526-3 536526-4 536526-5 536530-1 536531-1 536531-2 536531-3 536531-4 536532-1 536532-2 536532-3 536532-4 536533-1 536533-2 536533-3 536533-4 536536-1 536536-2 536536-3 536536-4 1-536536-1 536539-1 536540-1 536540-2 536540-3 536540-5 536540-6 536541-1 536542-1 536542-2 536542-3 536542-4 536542-6 536545-1 536545-2 536549-1 536549-2 536551-2 536551-4 536552-3 536557-1 536559-1 536561-2 536577-1 536578-1 536579-1 536580-1 536582-2 536582-4 536584-1 536584-2 536584-3 536587-1 536593-1 536594-1 536595-1 536596-1 536597-1 536599-1 536663-1 536678-1 536692-1 536692-2 536692-4 536694-1 536708-2 536710-2 536712-3 RoHS Compliant Part Number 5536524-9 5536526-1 5536526-2 5536526-3 5536526-4 5536526-5 5536530-1 5536531-1 5536531-2 5536531-3 5536531-4 5536532-1 5536532-2 5536532-3 5536532-4 5536533-1 5536533-2 5536533-3 5536533-4 5536536-1 5536536-2 5536536-3 5536536-4 1-5536536-1 5536539-1 5536540-1 5536540-2 5536540-3 5536540-5 5536540-6 5536541-1 5536542-1 5536542-2 5536542-3 5536542-4 5536542-6 5536545-1 5536545-2 5536549-1 5536549-2 5536551-2 5536551-4 5536552-3 5536557-1 5536559-1 5536561-2 5536577-1 5536578-1 5536579-1 5536580-1 5536582-2 5536582-4 5536584-1 5536584-2 5536584-3 5536587-1 5536593-1 5536594-1 5536595-1 5536596-1 5536597-1 5536599-1 5536663-1 5536678-1 5536692-1 5536692-2 5536692-4 5536694-1 5536708-2 5536710-2 5536712-3 Non-RoHS Part Number 536714-3 536716-2 536718-1 RoHS Compliant Part Number 5536714-3 5536716-2 5536718-1 33 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Z-PACK 2mm FB (Futurebus+) Connectors Engineering Notes 34 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Global Contacts Americas Argentina – Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2250 Canada – Markham Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Brasil – São Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Colombia – Bogota Phone: +57-1-240-9396 Fax: +57-1-660-0206 Mexico – Mexico City Phone: +52-55-5-729-0425 Fax: +52-55-5-398-1430 For Latin/South American Countries not shown Phone: +57-1-240-9396 Fax: +57-1-660-0206 United States – Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia – Sydney Phone: +61-2-9840-8200 Fax: +61-2-9899-5649 Product Information Center: (Technical Support) Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Japan – Kawasaki, Kanagawa Phone: +81-44-844-8079 Fax: +81-44-844-8733 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Raychem Products Phone: +81-44-900-5102 Fax: +81-44-5025-5027 India – Bangalore Phone: +91-80-841-0200 Fax: +91-80-841-0210 Korea – Seoul Phone: +82-2-3274-0535 Fax: +82-2-3274-0524/0531 Indonesia – Jakarta Phone: +6221-526-7852 Fax: +6221-526-7856 Malaysia – Selangor Phone: +60-3-7053055 Fax: +60-3-7053066 New Zealand – Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines – Makati City Phone: +632-867-8641 Fax: +632-867-8661 People’s Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-6485-0602 +86-21-6485-0728 Shunde Phone: Fax: +86-765-775-1368 +86-765-775-2823 Singapore – Singapore Phone: +65-4820-311 Fax: +65-4821-012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Taiwan – Taipei Phone: +886-2-2664-9977 Fax: +886-2-2664-9900 Thailand – Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam – Ho Chi Minh City Phone: +84-8-8232-546/7 Fax: +84-8-8221-443 Europe/ Middle East/Africa Austria – Vienna Phone: +43-190-560-0 Fax: +43-190-560-1333 Belgium – Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352 Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany – Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Czech Republic – Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Germany – Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Denmark – Viby J Phone: +45-70-15-52-00 Fax: +45-86-29-51-33 Germany HTS Division – Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Egypt – Cairo Phone: +20-2-417-76-47 Fax: +20-2-419-23-34 Estonia – Tallinn Phone: +372-65-05-474 Fax: +372-65-05-470 Finland – Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France – Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 France Tyco Electronics Export – St Ouen L’Aumone Phone: +33-1-3440-7200 Fax: +33-1-3440-7220 or +33-1-3440-7230 Great Britain – Stanmore Middlesex Phone: +44-181-954-2356 Fax: +44-181-954-6234 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-141 810 8967…69 Fax: +44-141 810 8971 Great Britain – Dorcan, Swindon Raychem Products Phone: +44-1793-528171 Fax: +44-1793-572516 Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Lithuania – Vilnius Phone: +370-5-21-31-402 Fax: +370-5-21-31-403 Netherlands – ’s-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway – Nesbru Phone: +47-66-77-88-99 Fax: +47-66-77-88-55 Poland – Warsaw Phone: +48-22-5490-888 Fax: +48-22-5490-880 Romania – Bucharest Phone: +40-1-311-3479+3596 Fax: +40-1-312-0574 Sweden – Upplands Väsby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey – Istanbul Phone: +90-212-281-8181…3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Ukraine – Kiev Phone: +38-044-238-6908 Fax: +38-044-568-5740 Russia – Moscow Phone: +7-095-926-55-06…09 Fax: +7-095-926-55-05 Russia – St. Petersburg Phone: +7-812-325-30-83 Fax: +7-812-325-32-88 Greece – Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Scotland – Dundee Madison Cable Products Phone: +44-1382-508080 Fax: +44-1382-505060 Hungary – Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Slovakia – Banská Bystrica Phone: +421-48-415-20-11/12 Fax: +421-48-415-20-13 Ireland – Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 Israel – Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 South Africa – Port Elizabeth Phone: +27-41-405-4500 Fax: +27-41-486-1314 35 Catalog 65358 Revised 2-05 www.tycoelectronics.com Dimensions are in millimeters unless otherwise specified. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
© Copyright 2024