Gmelin und Moll Werkzeug GmbH

Gmelin
Sliding hammers
Pulling clamps
Hooks / Pulling tools
Auxiliary tools
GmelinMOLL
Werkzeug GmbH
Sliding hammers
basic tools for autobody repair technician
Bow hook, universal
extra large
Art. No. 319028
Universal Hook, forged
to connect with our Gmelin
pulling clamps with pulling ring
Art. No. 319018
Practi Hook, forged
to connect with our Gmelin
pulling clamps with collar head
Art. No. 319038
Wheel hub puller
with adapter
Art. No. 101216-1
hamme
- permits successfully pulling operations
without the use of hydraulic equipment.
- it can be used directly at the car frame
together with our pulling clamps or hooks.
Even thick layers of sheet metals like a
wheel arches or door sills can be removed
easily.
- suitable for small but effective repairs
as a sensitive or forceful impact for the
illustrated accessories:
nit
asic u
mer b
Sliding
Art. No. 101212HS-10
Sliding hammer 5kg
g ham
- permits successfully pulling operations
without the use of hydraulic equipment.
- it can be used directly at the car frame
together with our pulling clamps or hooks.
Even thick layers of sheet metals like a wheel
arches or door sills can be removed easily.
- suitable for small but effective repairs
as a sensitive or forceful impact for the
illustrated accessories:
r basic
Art. No. 101312HS-10
Sliding hammer 9kg
Slidin
unit
Connector to cardan piece
available in sizes:
M16x2 Art. No. 101215-16
M18x1,5 Art. No. 101218-15
M18x2,5 Art. No. 101218-25
M20x1,5 Art. No. 101220-15
M24x3 Art. No. 101224-30
GmelinMOLL
Werkzeug GmbH
Sliding hammers
pulling clamps
101312HS
Heavy duty sliding hammer 9 kg
Our “most powerful” with Practi Hook. With its sliding
weight of 9 kg 8 t power of impact are approx.
achievable. Without set-up time it is possible to achieve
immediately a forceful impact in every direction.
Weight: 12,8 kg
101318HS
Heavy duty sliding hammer 9 kg
Our “most powerful” with Universal Hook. With its
sliding weight of 9 kg 8 t power of impact are approx.
achievable. Without set-up time it is possible to achieve
immediately a forceful impact in every direction.
Weight: 12,8 kg
101212HS
Heavy duty sliding hammer 5 kg
The classical high-power Gmelin hammer with Practi Hook. It
features a sliding weight of 5 kg and successfully permits
pulling operations without the use of hydraulic equipment. 5 t
power of impact are approx. achievable. Without set-up time it
is possible to achieve immediately a forceful impact in every
direction. Weight: 7,9 kg
101218HS
Heavy duty sliding hammer 5 kg
The classical high-power Gmelin hammer with Universal
Hook. It features a sliding weight of 5 kg and successfully
permits pulling operations without the use of hydraulic
equipment. 5 t power of impact are approx. achievable.
Without set-up time it is possible to achieve immediately a
forceful impact in every direction. Weight: 7,9 kg
Cone for self-locking
with collar head
307026
Mity Bite Clamp, forged
Self-locking universal clamp for straightening jobs and as a perfect addition to
our sliding hammer. To use perfectly for all pulling jobs and pulling chains on
the repair bench or on the dozer. Due to the forged finish the clamp is usable
for tensions up to 10 t. As more you pull as more is the gripping force. The
clamp can be loosened by a slight slap on the back of the cone. Manually you
screw or unscrew the wing nut.
Jaw width: 55 mm Weight: 2,5 kg
307026R
Mity Bite Clamp, forged
with pulling ring to connect with our Universal
Hook. Jaw width: 55 mm Weight: 2,5 kg
Universal Hook to
connect with our Gmelin
pulling clamps with
pulling ring
Art. No. 319018
Mity Bite Clamp with pulling
ring Art. No. 307026R
Cone for self-locking
with pulling ring
Practi Hook to connect
with our Gmelin pulling
clamps with collar head
Art. No. 319038
Mity Bite clamp with collar
head
Art. No. 307026
GmelinMOLL
Werkzeug GmbH
Pulling clamps
307027R
Mity Bite Clamp slimline, forged
with pulling ring to connect with our Universal Hook. The
narrow, tapered mouth is in particular for inaccessible
places. Due to the forged finish the clamp is usable for
tensions up to 5 t.
Jaw width: 30 mm
Weight: 2,10 kg
030300R
Mini-Bite-Clamp with pulling ring
The “Mini” of our program. Self-locking universal clamp by the cone.
Due to the narrow tapered shape this clamp is the ideal solution to
access narrow and hard reachable spaces. The hexagon head of the
clamping screw is countersunk in the clamp body this way it is locked
and a real single-hand clamping is possible.
Jaw width: 30 mm
Weight: 0,9 kg
042000R
Double Clamp with pulling ring
with narrow and wide mouth. If it is necessary you can either grab the
object with the narrow or with the wide side. The clamping screws are
fixed in the middle of the clamp so you can clamp the robust section of
thin sheet metal. The hexagon heads of the clamping screws are
countersunk in the clamp body this way the clamp is locked and a real
single-hand clamping is possible. You can connect the pulling ring with
our Universal Hook.
Weight: 1,75 kg Jaw width: 33 mm und 70 mm
030700R
90° Clamp with pulling ring
Special feature of the clamp is the 90°shape of the mouth and the
automatic self-locking created by the cone. Places can be reached
where conventional clamps are too big or where it necessary to grab
directly in the corner to achieve a better result. The hexagon head of
the clamping screw is countersunk in the clamp body this way the
clamp is locked and a real single-hand clamping is possible.
Jaw width: 25 x 25 mm
Weight: 0,9 kg
055000N
Tight Opening Clamp
is able to reach core support and upper sheet metal areas where no
other can. Perfect for small pick-up frame rails, keyholes, headlight
openings etc.
Caution: Clamping spindle shouldn‘t be used with an impact wrench.
Weight: 1,35 kg
Max. capacity: approx. 3 t
Jaw width: 40 mm
GmelinMOLL
Werkzeug GmbH
Hooks
pulling tools
125001
Panel puller
Panel puller is excellently suitable to grip behind edges or bulges. In
connection with a heavy sliding hammer or a light chain hoist (up to 3 t)
the panel puller is used for pulling jobs at wheel arches or at other openings
on the care frame like of tail lamps or sun roofs. Due to the shape of the tool
the ring part and the collar head are on the same level, the pull is in axial
direction.
Support width: 85 mm weight: 1,2 kg
125005
Door crack grab, forged
Double-sided grab, the flat part is used to grip in
cracks and behind edges. The opposite part with a
round opening is to pull at stud bolts or at edges,
etc. The door crack grab fits exactly the Practi-Hook.
Weight: 0,32 kg
200330
Bow puller, small version
The bow puller is similar to the panel puller. However it is slightly broader
and is equipped with various radii, so it is better suitable to pull at a
crumpled part in a wider section. Due to the collar head a pull in axial
direction is ensured. This is often contrary to other products on the market
where only a hooking of the chain onto the arches is possible, which leads
mostly to a fall over of the tool. The puller can be used with heavy Sliding
Hammers or with a light chain hoist (up to 3 t).
Support width: 155 mm
Weight: 1,75 kg
130000
Sill hook
A hook with a toothed support surface. It is used to hang behind
everything. The pulling chain is led through the eye of the hook to
connect and for self-locking.
Support width: 45 mm Weight: 2,1 kg
135000
Versa hook
Double hook with a toothed support surface on the one hand, on the
other with a u-shaped profile. It is used to hang behind everything. With
the u-shaped side you can connect additionally with alignment rails on the
ground or with straightening benches. The pulling chain is led through the
eye of the hook to connect and for self-locking.
Support width: 45 mm Weight: 2,3 kg
258235
Anchor Spoon
This holder claw connects the pulling chain to the alignment rail on the
ground. As an universal tool it can be used with several systems.
Support width: 160 mm
Weight: 2,5 kg
GmelinMOLL
Werkzeug GmbH
Auxiliary tools
501001
Corded spotter plastic repair kit
Lightweight, handheld machine enables metal staples to be
pressed into plastic in a quick and simple process for structurally
sound repairs of damaged plastic parts. Replacing of expensive
parts can be avoided. It helps you to make solid, permanent
repairs of breaks, cracks and tears in rigid or flexible plastic parts
For example ideal for solid, permanent repairs of cracks in
bumpers or lamp holders, broken locator pins, door panel clips
and so on. There is no need to identify the type of plastic contrary
to the common plastic-welding. LED light for temperature indicates
if the spotter is ready for usage.
Scope of delivery:
-spotter with power supply unit 220V, 20W
-storage case with 3 x 100 Kusto staples in box.
501000-203
Set of different staples for hot spotter plastic repair
3 x 100 Kusto staples in plastic box
501001KS
Set of different staples for hot spotter plastic repair
9 x 100 Kusto staples in plastic box
582000
Window trim dismantling tool universal
For secure dismantling of sticked window trims at the car door.
Damaging or bending of expensive window trims can be avoided to
the greatest possible extent.
Weight: 0,150 kg
585000
Clip remover universal
Extra slim and thin remover made of special steel for dismantling of
door panels, interior lamps or to open reusable plastic expanding
rivets. The powder coating enables a removal without damaging
the paintwork of the car.
Length: 160 mm
Width: 15 mm
Jaw opening: 5 mm
Weight: 0,085 kg
GmelinMOLL
Werkzeug GmbH
Gmelin
GmelinMOLL
Werkzeug GmbH
Von Steinbeis Str. 3
D-78476 Allensbach
Tel. 0049 7533 2957
Email: [email protected]
www.gmelin-moll.de
EPB1.0