1. business and industrial
2. energy
3. oil

OWNER’S MANUAL
HRX217HZUA
HRX217HZUA
HRX217HZUA
LAWN MOWER
Before operating the mower for the first time, please read this
Owner’s Manual. Even if you have operated other mowers,
take time to become familiar with how this mower works and
practice in a safe area until you build up your skills.
QUICK FIND
Air Filter . . . . . . . . . . . . . . . . . . . . . 12
Add Fuel. . . . . . . . . . . . . . . . . . . . . 7
Operating the Controls . . . . . . . . . . 8
Blade Inspection. . . . . . . . . . . . . . 11
Charging the Battery . . . . . . . . . . . .
Check the Oil Level . . . . . . . . . . . . .
Cleaning . . . . . . . . . . . . . . . . . . . . .
Dealer Locator Information . . . . . . .
13
6
14
19
How to Contact Honda. . . . . . . . . .
Maintenance Schedule . . . . . . . . .
Oil Change . . . . . . . . . . . . . . . . . . .
Spark Plug . . . . . . . . . . . . . . . . . . .
19
10
12
13
CONTENTS
FOR YOUR SAFETY . . . . . . . . . . .
PARTS AND CONTROLS . . . . . . .
INITIAL MOWER SETUP. . . . . . . .
Adjust the Handlebar . . . . . . . .
Add Engine Oil . . . . . . . . . . . . .
Assemble the Grass Bag . . . . .
BEFORE EACH OPERATION . . . .
Check Your Mower. . . . . . . . . .
Check Your Mowing Area . . . .
Clip Director® . . . . . . . . . . . . .
Cutting Height Adjustment . . . .
Check the Oil Level . . . . . . . . .
Add Fuel. . . . . . . . . . . . . . . . . .
OPERATION . . . . . . . . . . . . . . . . .
Safe Mowing Practices . . . . . .
Operating the Controls. . . . . . .
Operating the Controls. . . . . . .
2
3
3
3
4
4
4
4
4
5
6
6
7
7
7
8
8
Starting the Engine . . . . . . . . .
Stopping the Engine . . . . . . . .
SERVICING YOUR MOWER
Maintenance Safety . . . . . . . .
Maintenance Schedule . . . . . .
Blade Inspection . . . . . . . . . . .
Blade Mounting Bolt Inspection
Blade Replacement . . . . . . . . .
Oil Change . . . . . . . . . . . . . . .
Air Filter . . . . . . . . . . . . . . . . . .
Spark Plug . . . . . . . . . . . . . . . .
Spark Arrester (optional part) .
Replacing a Fuse . . . . . . . . . .
TRANSPORTING . . . . . . . . . . . . .
STORAGE . . . . . . . . . . . . . . . . . . .
Fuel . . . . . . . . . . . . . . . . . . . . .
Oil . . . . . . . . . . . . . . . . . . . . . .
Cleaning . . . . . . . . . . . . . . . . .
9
9
9
9
10
11
11
11
12
12
13
13
14
14
14
14
14
14
Storage Location . . . . . . . . . . . . . . . . 15
Handlebar . . . . . . . . . . . . . . . . . . . . . 15
TROUBLESHOOTING . . . . . . . . . . . . . . 15
Engine Will Not Start . . . . . . . . . . . . . 15
Loss of Power . . . . . . . . . . . . . . . . . . 15
Vibration . . . . . . . . . . . . . . . . . . . . . . 16
Mowing and Bagging Problems . . . . 16
TECHNICAL INFORMATION . . . . . . . . . 16
Serial Number Locations. . . . . . . . . . 16
High Altitude Operation . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . 17
AVOIDING FUEL-RELATED PROBLEMS 18
CUSTOMER INFORMATION . . . . . . . . . 19
Parts, Accessories, and Service Items 19
Dealer Locator Information . . . . . . . . 19
How to Contact Honda . . . . . . . . . . . 19
Honda Publications . . . . . . . . . . . . . . 19
LIMITED WARRANTY. . . . . . . . . . . . . . . 22
Illustrations in this manual are for instructional purposes only and may not be exact
representations. All information contained in this manual is based on the latest product
information available at the time of publication. Honda Australia Motorcycle and Power
Equipment Pty. Ltd. reserves the right to make changes at any time without notice. No
part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written permission of Honda Australia Motorcycle and
Power Equipment Pty. Ltd. This includes text, figures and tables.
Honda Australia Motorcycle and Power Equipment Pty. Ltd.
ABN 96 006 662 862 (trading as Honda MPE).
00X32VH7 W000
© 2014 American Honda Motor Co., Inc. All Rights Reserved
Important Message to Parents
WELCOME
Congratulations on your selection of a Honda lawn mower! We are
certain you will be pleased with your purchase of one of the finest
lawn mowers on the market. We want to help you get the best results
from your new mower and to operate it safely. This manual contains
information on how to do that; please read it carefully.
When your mower needs scheduled maintenance, keep in mind that
Honda Power Equipment servicing dealership personnel are specially
trained in servicing Honda mowers and are supported by the parts
and service divisions of Honda Australia.
Please read the LIMITED WARRANTY on page 22 to fully understand
what is covered by warranty and your responsibilities of ownership.
FOR YOUR SAFETY
The safety of children and adolescents is important to Honda. Lawn
mowers are powerful tools, not toys. As with any equipment, bad
judgements can result in serious injuries. Please ensure before any
child, adolescent, or inexperienced person begins using this device,
they:
• Possess the necessary level of physical strength and have the
mental capability of using the device in a safe manner
• Can fully operate all controls and understand the safety
instructions and warnings provided
Honda strongly recommends that all young, inexperienced or first time
users receive initial training and supervision from a competent adult,
in accordance with these instructions.
Safety Label Locations
These labels warn you of potential hazards that can cause serious
injury. Read them carefully. If a label comes off or becomes hard to
read, contact an authorised Honda servicing dealer for a replacement.
Your safety and the safety of others are very important. We have
provided important safety messages in this manual and on the mower.
This information alerts you to potential hazards that could hurt you or
others. Please read these messages carefully.
Of course, it is not practical or possible to warn you about all the
hazards associated with operating or maintaining a lawn mower. You
must use your own good judgment.
Safety Instructions
You will find important safety information in a variety of forms:
• Safety Labels – on the lawn mower
• Instructions – how to use this mower correctly and safely
• Safety Messages – preceded by a safety alert  symbol and one
of three signal words: DANGER, WARNING, or CAUTION.
Each message tells you what the hazard is, what can happen, and
what you can do to avoid or reduce injury.
These signal words mean:

DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

CAUTION
You CAN be HURT if you don’t follow
instructions.
• Damage Prevention Messages – you will also see other
important messages that are preceded by the word NOTICE. This
word means:
NOTICE
2
Your engine or other property can be
damaged if you don’t follow instructions.
IN U.S.A., Global Engineered Products,Inc.
SERVICED BY : Brookfield,WI 53005
(Battery danger
label on battery)
HOT MUFFLER CAN BURN YOU.
Stay away if engine has been running.
PARTS AND CONTROLS
INITIAL MOWER SETUP
SHIFT LEVER (P. 8)
THROTTLE LEVER
(P. 8)
REAR
DISCHARGE
GUARD (P. 5)
FUEL TANK CAP (P. 7)
KEY
SWITCH
RECOIL
STARTER
GRIP (P. 9)
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorised Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref.
No.
Description
Qty.

Grass bag frame
1

Grass bag
1

Key, and owner’s manual
1



HANDLEBAR
ADJUST KNOB (2)
(P. 4)
MUFFLER
OIL FILLER CAP
(P. 13)
(P. 12)
BLADE CONTROL
BUTTON (P. 8)
BLADE CONTROL
LEVER(P. 8)
Adjust the Handlebar
BATTERY
BOX
1. With the handlebar adjust knobs in the unlocked position, raise the
handlebar into the mowing position.
(P. 13)
DRIVE
CLUTCH
LEVER
CUTTING HEIGHT
ADJUSTMENT
LEVER (4) (P. 6)
Take care not to kink
the cables.
(P. 8)
GRASS BAG
HANDLEBAR ADJUST
KNOBS
(P. 6)
CLIP DIRECTOR®
KNOB (P. 5)
SPARK PLUG
CAP (P. 13)
AIR FILTER
CARBURETOR
UNLOCKED
(P. 12)
FUEL VALVE ON
FUEL VALVE OFF
LOCKED
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
3
Add Engine Oil
The mower is shipped WITHOUT OIL in the engine. Remove the oil
filler cap/dipstick and add enough SAE 10W-30 API service category
SJ or later oil to bring the oil level between the upper and lower limit
marks on the dipstick—without screwing the dipstick in (approximately
0.35 ~ 0.40 litres is required). See page 12.
All Honda engines are run at the factory prior to packaging. Most of
the oil is removed prior to shipment; however, some oil remains in the
engine. The amount of oil left in the engine varies.
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may get transferred to the air cleaner housing and air filter.
An indication of overfilling is white or blue smoke coming from the
muffler when the engine is running.
After filling the engine with oil, screw the filler/cap dipstick in and
remove the hang tag near the recoil starter grip that says “The engine
has no oil.”
BEFORE EACH OPERATION
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
Read and understand this manual. Know what the controls do and
how to operate them.
Familiarize yourself with the lawn mower and its operation before you
begin using it. Know how to quickly shut off the lawn mower in case of
an emergency.
Check Your Mower
For your safety, and to maximize the service life of your lawn mower, it
is very important to take a few moments before you operate the lawn
mower to check its condition. Be sure to take care of any problem you
find, or have your servicing dealer correct it, before you operate the
lawn mower.
Assemble the Grass Bag
1. Install the assembled frame into the fabric grass bag, keeping the
grass bag handle exposed.
2. Attach the plastic clips as shown.
GRASS BAG HANDLE
TOP PLASTIC CLIP
(Route under the
handle and frame)

WARNING
Improperly maintaining this lawn mower, or failing to
correct a problem before operation, could cause a
malfunction in which you could be seriously injured.
Always perform a pre-operation inspection before each
operation, and correct any problem.
• Make sure the lawn mower is on a level surface
• Look around and underneath the lawn mower for signs of oil or
petrol leaks
• Look for signs of damage
• Check each control for proper operation
• Check the blades for wear. Replace as necessary (page 11)
FABRIC GRASS BAG
• Check that the blade bolts are tight (page 11)
• Check that all nuts, bolts, and screws are tightened
• Check the air filter (page 12) and oil level (page 6)
Before Using Your Lawn Mower
All Mower operators must read the following sections:
• FOR YOUR SAFETY (page 2)
• BEFORE EACH OPERATION (page 4)
• OPERATION (page 7)
• MAINTENANCE SCHEDULE (page 10)
• Check the fuel level (page 7). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
Check Your Mowing Area
For your safety and the safety of others, always inspect the area
before operating the lawn mower.
Anything that can be picked up by the blades and thrown is a potential
hazard to you and others. Look for things like stones, sticks, nails, and
wire, and remove them from the lawn area.
People and animals near the lawn area can move into your lawn
mower’s path or into a position where they could be struck by thrown
objects. Clear the area of pets and people, especially children. Their
safety is your responsibility.
Check the condition of the grass. Adjust your lawn mower ground
speed and mowing swath accordingly.
4
Clip Director®
The Clip Director can be adjusted to any one of the ten positions to
achieve the desired mowing results (bag, bag and mulch, or mulch).
FULL BAGGING OR
REAR DISCHARGE
FULL MULCHING
To adjust the Clip Director knob, pull the knob downward and towards
the rear of the mower. The knob adjusts a sliding door from the fully
open BAG position to the fully closed MULCH position.
KNOB (BAG POSITION)
KNOB (MULCH POSITION)
Some grass accumulation in the discharge opening is normal when
the Clip Director is fully closed in the MULCH position. To remove this
grass, close the discharge guard, fully open the Clip Director in the
BAG position, engage the blade control lever, and start the engine.
If a high resistance is noticed when moving the Clip Director knob
from side-to-side, excessive grass may have built up on top of the
sliding door.
SLIDING DOOR
(fully open)
CLIP DIRECTOR KNOB
SLIDING DOOR
(fully closed)
Rear Discharge
To discharge clippings to the rear, remove the grass bag and position
the Clip Director knob in the BAG range. Maximum rear discharge will
occur when the Clip Director knob is all the way to the left (BAG)
position. As the Clip Director knob is moved toward the right (MULCH)
position, less grass will be discharged through the rear discharge
guard.
SLIDING DOOR
(fully closed)
DISCHARGE
GUARD
Important Safety Precaution
Always release the blade control lever and disconnect the spark plug
cap (page 13) before lifting the discharge guard to view or clean
around the sliding door. This will prevent contact with the rotating
blades and prevent objects from being thrown into the discharge area.
Sliding Door Position
The sliding door can be positioned to produce different mowing
results. If the preferred sliding door position is unknown, install the
grass bag and begin mowing with the Clip Director knob all the way to
the BAG position. Check the appearance of the lawn. As the knob is
moved towards the MULCH position, more grass will be recycled back
into the lawn. Adjust the Clip Director knob until the desired result is
achieved.
CLIP DIRECTOR KNOB
Fallen Leaves
Use the Clip Director to shred and collect fallen leaves for disposal.
Set the front wheels so they are one or two settings higher than the
rear. Set the Clip Director in position #9 (not quite full mulching), and
adjust the setting from this point for best results.
Rear Shield
During normal use the rear shield is subject to deterioration and wear.
Remove the grass bag and raise the discharge guard to check the
rear shield for cracks or tears. If the rear shield is excessively worn,
have it replaced by your authorised Honda servicing dealer.
BAGGING OR REAR DISCHARGE
AND SOME MULCHING
SLIDING DOOR
(50% open)
DISCHARGE GUARD
REAR SHIELD
5
Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the
bag fabric, which traps the grass clippings. Always empty the grass
bag before it becomes filled to the limit of its capacity. Bagging
performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
You can leave the grass bag on the mower during mowing, even
when full mulching is selected.
To adjust cutting height, pull
each adjustment lever toward
the wheel, and move it into
another notch.
ADJUSTMENT LEVERS
Move all four adjustment levers
to the same position, forward
for tall grass and rearward for
short grass.
To minimize dust and fine particles from passing through the grass
bag fabric, it is best to mow grass in the morning when the grass is
damp.
Inspection
During use, the grass bag material is subject to normal wear and tear.

THE CUTTING HEIGHT FIGURES ARE APPROXIMATE.
20mm
32mm
46mm
62mm
75mm
88mm
100mm
CAUTION
An excessively worn grass bag may allow objects to be
thrown toward the operator.
Replace a worn grass bag to prevent possible injury.
Installation
FORWARD
DIRECTION
Clean any grass
clippings from the
hook channel.
•
3
DISCHARGE GUARD
•
GRASS BAG
HANDLE
BAG
2. Release the
discharge guard to
secure the grass
bag.
Removal
1. Raise the discharge
guard, grasp the
grass bag handle,
and remove the
grass bag.
2. Release the
discharge guard.
3. When the grass bag is clear of the discharge guard, you can lift it
through the handlebar opening or remove it to the rear of the
mower below the handlebar.
Cutting Height Adjustment
Each wheel of the mower can be adjusted to one of seven settings.
The actual height of cut grass will vary with lawn and soil conditions.
Be sure the engine is not running when adjusting the cutting height.
4
1. Raise the discharge
guard and hook the
grass bag onto the
mower deck as
shown.
•
2
1
Grass bag replacement is explained on page 4.
If you are not sure what cutting height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Then readjust the cutting height if necessary.
Check the Oil Level
Check the engine oil level with
the engine stopped and the
mower on a level surface.
1. Clean the area around the oil
filler cap.
2. Unscrew and remove the
filler cap/dipstick and wipe it
clean.
3. Insert and remove the
dipstick without screwing it
into the filler neck. Check
the oil level shown on the
dipstick.
4. If the oil level is low, add oil
to reach the upper limit mark
on the dipstick.
FILLER CAP
/DIPSTICK
UPPER
LIMIT
Do not overfill. If the engine
LOWER
is overfilled, the excess oil
LIMIT
may get transferred to the
air cleaner housing and air
filter. An indication of overfilling is white or blue smoke coming
from the muffler when the engine is running.
Use 10W-30 API Service category SJ or later oil for normal
conditions. For additional oil recommendations, see page 12.
NOTICE
Running the engine with a low oil level can cause engine damage.
5. Screw in the filler cap/dipstick securely.
6
Add Fuel
This engine is certified to operate on regular petrol with a pump
octane rating of 86 or higher.
Never use stale or contaminated petrol or an oil/petrol mixture. Avoid
getting dirt or water in the fuel tank.
You may use regular unleaded petrol containing no more than 10%
ethanol (E10) or 5% methanol by volume. In addition, methanol must
contain cosolvents and corrosion inhibitors.
Use of fuels with content of ethanol or methanol greater than shown
above may cause starting and/or performance problems. It may also
damage metal, rubber, and plastic parts of the fuel system.
Engine damage or performance problems that result form using a fuel
with percentages of ethanol or methanol greater than shown above
are not covered under warranty.

WARNING
OPERATION
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your mower’s exhaust contains poisonous
carbon monoxide gas, which can collect rapidly in an enclosed area
and cause illness or death.

WARNING
Exhaust contains poisonous carbon monoxide gas that
can build up to dangerous levels in closed areas.
Breathing carbon monoxide can cause unconsciousness
or death.
Never run the lawn mower in a closed, or even partially
closed area where people may be present.
You may hear a clicking noise as you push the lawn mower forward
with the engine OFF. This is normal and will not damage the mower.
Safe Mowing Practices
Petrol is highly flammable and explosive, and you can be
burned or seriously injured when refueling.
• Stop the engine and keep heat, sparks, and flame
away
Most injuries and property damage with walk-behind mowers can be
prevented if you follow all instructions in this manual and on the
mower. The most common hazards are discussed below, along with
the best way to protect yourself and others.
• Refuel only outdoors
Avoid Rotating Blades
• Wipe up spills immediately
Rotating blades can cause serious cuts and even amputate fingers,
hands, toes, or feet. Keep away from the mower deck whenever the
engine is running. If you need to adjust the cutting height or work
around the deck for any other reason, always shut off the engine.
Wear heavy gloves and disconnect the spark plug cap when you need
to clean the mower deck or handle the blades.
If your equipment will be used on an infrequent or intermittent basis,
(more than 4 weeks before next use), refer to “AVOIDING
FUEL-RELATED PROBLEMS” on page 18 for information regarding
fuel deterioration.
1. Remove the fuel tank cap.
2. Add fuel to the bottom of the red fuel level gauge in the neck of the
fuel tank. Do not overfill. Wipe up spilled fuel before starting the
engine.
RED FUEL
LEVEL GAUGE

WARNING
The blades are sharp and spin at high speed. A spinning
blade can cut you severely and can amputate fingers and
toes.
• Wear protective footwear
• Keep you hands and feet away from the mower deck
while the engine is running
MAXIMUM
FUEL LEVEL
• Stop the engine before performing any adjustment,
inspection, or maintenance
Clear Mowing Area
Mower blades can throw rocks and other objects with enough force to
cause serious injury. Before mowing, carefully inspect the area and
remove all sticks, stones, pieces of wire, and other loose objects.
Never operate the blades over gravel.
NOTICE
3. Tighten the fuel tank cap until it clicks.
Move the mower at least 3 metres away from the fueling source
and site before starting the engine.
Striking objects with the spinning blades can cause severe engine
damage, which is not covered by the LIMITED WARRANTY
(page 22).
Keep Shields in Place
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered by
the LIMITED WARRANTY (page 22).
Guards and shields are designed to protect you from being hit by
thrown objects and from hot engine parts and moving components.
For your safety and the safety of others, keep all shields in place
when the engine is running.
7
Refuel With Care
Operating the Controls
Petrol is extremely flammable and petrol vapor can explode. Refuel
only outdoors, in a well-ventilated area, with the engine OFF. Never
smoke near petrol, and keep other flames and sparks away. Always
store petrol in an approved container.
Throttle Lever
Wearing protective clothing will reduce your risk of injury. Long pants
and eye protection reduce the risk of injuries from thrown objects.
Sturdy shoes with aggressive soles will help protect your feet and give
you better traction on slopes or uneven ground.
Stop the Engine When Not Mowing
If you need to leave the mower for any reason, even just to inspect the
lawn ahead, stop the engine by releasing the blade control lever and
moving the throttle lever to the STOP position.
Do not try to increase the
preset engine speed; the
blades could fracture and
come apart.
Avoid Slopes
Blade Control Lever
Avoid steep slopes of more than
20°.
To start blade rotation, hold
down the yellow button  on
top of the blade control lever,
and then push the lever 
forward quickly and hold it
against
the
handlebar.
Release the yellow button.
Mow across slopes, not up and
down. Be careful when changing
direction. Mowing on a slope
when the grass is damp or wet
could cause you to slip, fall, and
lose control of the mower.
NOTICE
Mowing on steep slopes can
starve the engine of oil, causing engine damage that is not covered by
the LIMITED WARRANTY (page 22).
Keep all four wheels on the ground, and be careful to avoid losing
your footing and your control of the mower. Keep a firm grip on the
handlebar, and walk, never run, with the mower. Be very careful when
mowing uneven or rough ground.
If stuck, do not kick or shove the mower with your foot. Use the
handlebar to control the mower.
Avoid Obstacles
Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the blade control
lever to stop the blades before reaching areas with gravel, loose
stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the
surface of the lawn such as sprinkler heads, paving, edging, raised
tree roots, etc.
If the blade hits something, or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (page 11). Striking objects may damage the blades, bend the
crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.

WARNING
A worn, cracked, or damaged blade can break, and
pieces of the damaged blade can become dangerous
projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly (see page 11), and do not
operate the mower with a worn or damaged blade.
The LIMITED WARRANTY (page 22) does not cover parts damaged
by accidental impact collision.
8
Operate the blade control
lever with a quick and
complete motion so that the
blade control is always either
fully engaged or released.
This will help to prevent
stalling the engine, and it will
also extend the service life of
the blade control mechanism.
STOP
OP
ST
Wear Protective Clothing
For best cut quality, always
mow with the throttle lever in THROTTLE
the FAST position. When the LEVER
blades rotate at the preset
fast speed, they create a
strong fan action that lifts and
cuts grass more efficiently.
FAST
BLADE CONTROL LEVER


BUTTON
To stop blade rotation, release the blade control lever. The engine will
continue to run. Always release the blade control lever before starting
the engine to prevent the blades from turning.
Drive Clutch Lever
Push the drive clutch
lever forward to propel the
mower.
BLADE CONTROL LEVER
Release the drive clutch
lever to stop the mower’s
forward movement.
You can control the
self-propelled speed with
the drive clutch lever. The
DRIVE CLUTCH LEVER
mower will move
gradually faster as you
push the drive clutch lever
forward. If you push the lever all the way forward to the handlebar, the
mower will move at the speed determined by the shift lever setting.
When moving and using the drive clutch lever to change the
self-propelled speed, continue to fully hold the blade control lever
against the handlebar. This will help prevent damage to the blade
control mechanism. Use the shift lever (see page 9) to change the
maximum speed so you can hold the drive clutch lever comfortably
against the handlebar.
For self-propelled mowing, press the button on top of the blade control
lever, push the blade control lever completely forward, and then push
the drive clutch lever forward. The drive clutch lever will hold the blade
control lever against the handlebar.
Always release the drive clutch lever before starting the engine. If the
drive clutch is engaged, the mower will move forward when you
operate the starter.
Stopping the Engine
Shift Lever
Use the shift lever to select
the forward speed at which
you wish to mow.
SHIFT
LEVER
OFF
2. Move the throttle lever to the
STOP position.
TH
R
Do not use the throttle lever
to adjust your forward speed.
The throttle lever must
remain in the FAST position
for good mowing
performance.
1. Release the drive clutch and blade
control levers.
SLOW
O
TT
LE
3. Turn the key switch to the OFF
position
For maximum mowing performance, use the lower speed range for
mowing and the higher speed range for transporting.
4. If your mower will not be used for
3 to 4 weeks, we recommend
running the engine’s carburetor
out of fuel. You can do this by
leaving the fuel valve OFF,
restarting the engine and running it until it stops. See “AVOIDING
FUEL-RELATED PROBLEMS” on page 18 if you don’t plan to use
your mower for a month or more.
With the shift lever all the way back and the drive clutch lever
engaged, the mower will move slowly or not at all.
5. Clean your mower after each mowing; refer to “Cleaning” on
page 14.
FAST
The position of the shift lever
determines the maximum
ground speed when the drive
clutch lever is fully engaged.
Starting the Engine
Before starting the engine, always release the drive control lever so
that the mower will not move forward when you operate the starter.
Proper maintenance is essential for safe, economical, and
trouble-free operation. It also helps reduce air pollution.
1. Turn the fuel valve to the ON position (page 3).
2. Move the throttle lever to the
FAST position.
OP
ST

FAST
THROTTLE
LEVER
3. Start the engine using the
electric starter or the recoil
(manual) starter.
Electric start:
Turn the starter key switch to
the START position. Let the
key return to the RUN
position when the engine
starts.
SERVICING YOUR MOWER
RUN
START
The starter should not be
cranked for more than 5
seconds at a time. If the
engine fails to start, release
the switch and wait 10 seconds before operating the starter again.
If the battery does not have sufficient charge to start the engine,
possibly due to a long storage period, use the recoil starter to start
the engine for at least one mowing session. The battery should
have sufficient charge after one mowing session (approximately
1 hr).
Manual start:
Turn the engine switch to the RUN position. The engine switch
must be in the RUN position to start the engine with the recoil
starter.
Pull the starter grip lightly until you feel resistance, and then pull
briskly. Return the starter grip gently
To ensure easy restarting and maximum performance from the Auto
Choke System, allow the engine to run for at least three minutes after
starting a cold engine before shutting down. This minimum run time
will be longer if the temperature is below 21°C.
WARNING
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner’s manual.
To help you properly care for your mower, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult or require special tools are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high load, high temperature, or unusually wet or dusty conditions,
consult your servicing dealer for recommendations applicable to your
individual needs and use.
Remember that an authorised Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it. To ensure
the best quality and reliability, use only new, Honda Genuine parts or
their equivalents for repair and replacement.
Maintenance Safety
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.

WARNING
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
manual.
9
Safety Precautions
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate
the engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around petrol. Use only a nonflammable solvent, not
petrol, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
Maintenance Schedule
50 hours
of use
or every
6 months
100 hours
of use
or every
year
150 hours
of use
or every two
years
See
page
Action
Before each
use
Rear shield
Check
O
5
Blades
Inspect
O
11
Blade mounting bolts
Inspect
O
11
Engine oil
Check
O
6
O
Change
Air filter
Check
5 hours
of use
or first
month
First
25 hours
of use
Item
O (2)
O
O
O
12
O (1)
Clean
12
O (1)
O (1)
O
Replace
Grass bag
Check
O
Blade control operation
Check
O
Spark plug
Check
6
O
8
O
13
O
Replace
O
13
O (3)
O (3)
—
O (3)
O (3)
—
Adjust
O (3)
—
Idle speed
Adjust
O (3)
—
Fuel tank/filter
Clean
O (3)
—
Valve clearance
Checkadjust
O (3)
—
Pinion gears
Grease
O (3)
—
Rear wheel adjuster
bushings
Inspectgrease
Fuel lines
Check
Spark arrester (optional
part)
Clean
Blade control cable
Adjust
Drive clutch cable
Adjust
Throttle cable
O (3)
Check every 2 years and replace if necessary (3)
—
—
(1) Service more frequently when used in dusty areas.
(2) Change engine oil every 25 hours when used under heavy load or in high outside air temperatures.
(3) These items should be serviced by an authorised Honda servicing dealer unless you have the proper tools and are mechanically proficient.
Refer to the Honda shop manual for service procedures.
Failure to follow this Maintenance Schedule could result in non-warrantable failures.
10
Blade Inspection
Blade Replacement
1. Turn the fuel valve OFF (page 3).
1. Remove the two blade bolts with a 14 mm (6 point) socket wrench.
Use a wooden block to prevent the blades from turning when
removing the bolts. Remove the blades.
2. Disconnect the spark plug cap from the spark plug (page 13).
3. Tilt the mower to the right side so that the fuel cap side is up. This
will help to prevent fuel leakage and hard starting due to carburetor
flooding.
4. Inspect the blades for damage, cracks, and excessive rust or
corrosion.
UPPER BLADE
LOWER
BLADE
BLADE
BOLT (2)
BLADE BOLTS
SPECIAL
WASHER (2)
BLADES
2. Clean dirt and grass from around the blade mounting area.

3. Install the sharpened or replacement blades using the two blade
bolts and special washers as shown below.
WARNING
A worn, cracked, or damaged blade can break, and
pieces of the damaged blade can become dangerous
projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly, and do not operate the
mower with worn or damaged blades.
A dull blade can be sharpened, but a blade that is excessively worn,
bent, cracked, or otherwise damaged must be replaced.

WARNING
Operating the mower with only one blade will result in an
improperly seated blade that can be thrown from the
mower and seriously hurt or kill someone.
Always install both blades as a set.
The blade bolts and washers are specially designed for this
application. When replacing bolts and washers, use only Honda
Genuine replacement parts.
UPPER BLADE
NORMAL
TRAILING EDGE
LOWER BLADE
EXCESSIVELY WORN
TRAILING EDGE
NORMAL
WORN
BENT
BLADE BOLT [2]
AND WASHER [2]
CRACKED
If a blade is bent, take the lawn mower to an authorised Honda
servicing dealer for inspection.
Blade Mounting Bolt Inspection
Inspect the blade bolts for any signs of damage
or looseness. If they are damaged, they must
be replaced.
If they appear loose, a torque wrench must be
used to accurately tighten the blade bolts to the
required torque. If you do not have a torque
wrench, take your lawn mower to an authorised
dealer to have the bolts replaced or tightened.
Use only Honda Genuine blade bolts and
special washers, since they are specifically
designed for this purpose.
INSPECT WASHERS
AND BOLT HEADS
FOR LOOSENESS
AND DAMAGE
SPECIAL WASHER
DIRECTION
4. Tighten the blade bolts with a torque wrench to the specified
torque. Use a wooden block to prevent the blades from turning
when tightening the bolts, as shown on page 12.
Blade bolt torque: 49 ~ 59 N·m
If you do not have a torque wrench, have an authorised Honda
servicing dealer tighten the blade bolts.

WARNING
If the blade bolts are not torqued properly, the blades
could loosen and be thrown from the mower and seriously
hurt or kill someone.
Ensure the blade bolts are torqued properly.
11
Engine Oil Recommendations
BLADES
Oil is a major factor affecting performance and service life. Always
change the oil in accordance with the Maintenance Schedule
(page 10).
Recommended oil for general use: SAE 10W-30
Other viscosities shown in the chart may be used when the average
temperature in your area is within the recommended range.
5W-30 • 10W-30
0
TORQUE
WRENCH
20
-20 -10
40
0
60
10
80 100°F
20
30
40°C
TORQUE:
49 ~ 59 N•m
WOODEN
BLOCK
The SAE oil viscosity and service category are in the API label on the
oil container. Honda recommends API service category SJ or later oil.
Oil Change
Air Filter
Change the oil after the first month or 5 hours of use. Thereafter,
change the oil every 6 months or 50 hours of use. Change the oil
more frequently when used under heavy load or high outdoor
temperatures. See “Engine Oil Recommendations” on this page for
recommended oil properties.
Clean the air filter after the first 25 hours of use. Thereafter, clean the
filter every 6 months or 50 hours of use. Clean the filter more often
when used in dusty areas. Replace the filter every 2 years or 150
hours of use.
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
To reduce the chance of scratching the side of the mower deck or
wheels when tipping, place a piece of cardboard or drop cloth on the
ground. The use of a commercially available siphon pump will save
time and make the oil change easier.
1. Turn the fuel valve OFF (page 3). This will reduce the possibility of
fuel leakage
2. Wipe the oil filler area clean, and then remove the oil filler
cap/dipstick.
3. Place a suitable container
next to the mower to catch
the used oil, and then tilt the
mower on its right side.
The used oil will drain
through the filler neck. Allow
the oil to drain completely.
A properly maintained air filter will help prevent dirt from entering your
engine. Dirt entering the carburetor can be drawn into small passages
in the carburetor and cause premature engine wear. These small
passages can become blocked, causing starting or running problems.
NOTICE
Operating the engine without an air filter, with a damaged air filter, or
with an improperly installed air filter cover will allow dirt to enter the
engine, causing rapid engine wear. This type of damage is not
covered by the LIMITED WARRANTY (page 22).
We recommend the use of a Honda Genuine air filter to ensure it
seals and performs as designed. Using a non-Honda air filter can
result in dirt bypassing the filter, causing damage to the engine or fuel
system.
1. Press down on the cover tabs and remove the cover.
2. Remove the filter from the air cleaner housing.
AIR CLEANER
HOUSING
FILTER
After draining, take the oil to
your local recycling centre or
service station. Do not throw
it in the trash, pour it on the
ground, or pour it down a
drain.
COVER
TABS
4. Fill with the recommended oil.
Do not overfill. Allow a couple
of minutes for the oil to settle
in the engine, and then
measure
the
oil
level
(page 4).
COVER
Refill amount:
0.35 ~ 0.40 litres
NOTICE
Using non detergent oil can
shorten the engine’s service
life, and using 2-stroke oil
can damage the engine.
12
3. Inspect the filter; replace if damaged.
4. Clean the filter by tapping it several times on a hard surface to
remove dirt, or blow compressed air (not exceeding 207 kPa)
through the air filter from the inside. Never try to brush off dirt;
brushing will force dirt into the fibers.
5. Wipe dirt from the inside of the air cleaner housing and cover using
a moist rag. Be careful to prevent dirt from entering the air duct
that leads to the carburetor.
6. Reinstall the filter and cover. Be sure both tabs are fully locked in
place.
Spark Plug
Spark Arrester (optional part)
Replace the spark plug every 2 years or after 150 hours of use.
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
Recommended Spark Plug: NGK - BPR5ES
1. Allow the engine to cool and disconnect the spark plug cap.
NOTICE
An incorrect spark plug can cause engine damage.
For good performance, the
spark plug must be properly
gapped and free of deposits.
SPARK PLUG
3. Inspect the spark plug.
Replace it if the electrodes
are worn, or if the insulator
is cracked or chipped.
4. Measure the spark plug
electrode gap with a suitable
gauge.
SETSCREW
SPARK ARRESTER
SPARK
PLUG
CAP
0.7 ~ 0.8 mm
FLANGE
BOLT (3)
Gap: 0.7 ~ 0.8mm
Correct the gap, if necessary,
by carefully bending the side
electrode.
3. Check for carbon deposits on the spark arrester and the exhaust
port. Use a brush to remove any carbon deposits from the screen.
Replace the screen if it is torn or damaged.
4. Installation is the reverse of removal. Tighten all hardware
securely.
1. Allow the engine to cool,
disconnect the spark plug
cap, and remove any dirt
from around the spark plug
area.
2. Remove the spark plug
with a 21mm spark plug
wrench.
2. Remove the three flange bolts and the heat shield. Remove the
setscrew and the spark arrester from the muffler.
SEALING
WASHER
5. Install
the
spark
plug
carefully, by hand, to avoid
cross-threading.
6. After the spark plug seats,
tighten with a 21mm spark
plug wrench to compress the
washer
If reinstalling the old spark plug, tighten 1/8 to 1/4 turn after the
spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
Spark plug torque: 20 N·m
HEAT SHIELD
Charging the Battery
The lawn mower engine has an internal charging system. Under
normal mowing usage it is not necessary to charge or maintain the
battery.
If the mower fails to start or has been stored for an extended period:
• Start the lawn mower using the recoil starter manually for at least
one mowing session. This should charge the battery sufficiently to
use the electric starter.
• If the electric starter does not operate (after manually starting for
one mowing session), check the 3 Amp and 40 Amp fuses (shown
on page 14)
• If the electric starter still does not operate, take the lawn mower to
an authorised Honda servicing dealer
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
7. Install the spark plug cap on the spark plug.
13
Replacing a Fuse
The electric starter circuit and battery are protected by a 40 Ampere
and 3 Ampere fuse. If the 40 Amp fuse burns out, the electric starter
will not operate and if the 3 Amp fuse burns out, the battery will not
charge. The engine can be started manually if either fuse burns out.
1. Remove the battery cover by removing the three cover mounting
screws.
2. The 40 Amp fuse is for main line protection. The 3 Amp fuse is for
the charge line protection.
3. Remove and inspect the fuses. If they are burned out, replace with
a serviceable fuse as shown.
COVER MOUNTING
SCREW HOLE (3)
STORAGE
Proper storage preparation is essential for keeping your lawn mower
trouble free and looking good. To help keep rust and corrosion from
impairing your lawn mower’s function and appearance, and to make
the engine easier to start after storage, follow the instructions
described in this section to:
•
•
•
•
Drain or treat the fuel
Change the oil and coat the engine cylinder
Clean the mower, engine, and grass bag
Choose a storage location
Fuel
See “AVOIDING FUEL-RELATED PROBLEMS” on page 18 for a list
of recommended procedures to avoid fuel related problems.
40 AMPERE FUSE
The LIMITED WARRANTY (page 22) does not cover fuel system
damage or engine performance problems resulting from neglected
storage preparation.
Oil
Inspect the fuse to
see if it is blown.
BATTERY
Change the engine oil (see page 12).
Add oil in the engine cylinder to prevent rust.
1. Remove the spark plug (page 13).
3 AMPERE FUSE
BLOWN
If a frequent fuse failure occurs, it usually indicates a short circuit or
an overload in the electrical system. Take the mower to an authorised
Honda servicing dealer for repair.
TRANSPORTING
If the engine has been running, allow it to cool before loading the
mower on the transport vehicle. A hot engine and exhaust system can
burn you and can ignite some materials.
Turn the fuel valve to the OFF position. This will prevent carburetor
flooding and reduce the possibility of fuel leakage.
If installed, remove the grass bag.
If a suitable loading ramp is not available, two people should lift the
mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport
vehicle. Tie the mower down with rope or straps, and block the
wheels. Keep the tie-down rope or straps away from the controls,
adjustment levers, cables, and the carburetor.
Fold the handlebar so the mower will take up less space (page 15).
2. Pour a teaspoon (5 cc) of clean
engine oil into the cylinder to
keep it from rusting.
OIL
3. Pull the starter rope several
times to distribute the oil in the
cylinder.
4. Reinstall the spark plug.
5. Pull the starter rope slowly until
resistance is felt, and then
return the starter grip gently. SPARK
This will close the valves so PLUG
moisture cannot enter the HOLE
engine cylinder.
Cleaning
Mower Deck
Before washing the underside of the mower deck, stop the engine and
turn the fuel valve to the OFF position. Rest the mower on its right
side, so the fuel cap side is up. This will help to prevent fuel leakage
and hard starting due to carburetor flooding. Wear heavy gloves to
protect your hands from the blades.
Be careful to avoid getting water into controls and cables.
Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner and exhaust opening.
NOTICE
Using a garden hose or pressure washing equipment can force water
into the air filter. Water in the air cleaner will soak the paper element
and can enter the carburetor or engine cylinder, causing damage.
Water contacting a hot engine can cause damage. If the engine has
been running, allow it to cool before washing.
Grass Bag
Remove the bag from the mower, and wash it with a garden hose or
pressure washer. Allow the bag to dry completely before storage.
14
Drying
After washing the lawn mower, wipe dry all accessible surfaces.
TROUBLESHOOTING
Place the mower with its wheels on a level surface. Start the engine
outdoors and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.
Engine Will Not Start
Possible Cause
Stop the engine and allow it to cool.
Correction
After the lawn mower is clean and dry, touch up any damaged paint,
and coat other areas that may rust with a light film of oil.
Throttle lever in wrong position
Move the throttle lever to the
FAST position (page 8)
Storage Location
Starter turns slowly or not at all
• Use the recoil starter for at
least one mowing session to
allow the battery to charge
• Check for blown fuse
(page 14)
Fuel valve OFF
Turn the fuel valve ON
(page 3).
Out of fuel
Refuel (page 7).
Bad fuel; mower stored without
treating petrol, or refueled with bad
petrol
Refuel with fresh petrol
(page 7).
Spark plug faulty, fouled, or
improperly gapped
Gap or replace the spark plug
(page 13).
Spark plug wet with fuel (flooded
engine)
Dry and reinstall the spark
plug.
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc.
Take the mower to an
authorised Honda servicing
dealer for repair.
If your mower will be stored with petrol in the fuel tank and carburetor,
it is important to reduce the hazard of petrol vapor ignition. Select a
well-ventilated dry storage area away from any appliance that
operates with a flame, such as a furnace, water heater, or clothes
dryer. Also avoid any area with a spark-producing electric motor, or
where power tools are operated.
Make sure the fuel valve is in the OFF position to reduce the
possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can cause
fuel or oil leakage.
With the engine and exhaust system cool, cover the mower to keep
out dust. A hot engine and exhaust system can ignite or melt some
materials. Do not use sheet plastic as a dust cover. A nonporous
cover will trap moisture around the mower, promoting rust and
corrosion.
Handlebar
Remove the grass bag if installed. You can place it on top of the
engine with the bag opening to the front.
Loss of Power
Possible Cause
Throttle not set to FAST
Move the throttle lever to the
FAST position (page 8).
Grass is too tall
Raise the cutting height
(page 6), cut a narrower
swath, use a slower ground
speed, or cut more frequently.
Instead of mulching, try rear
discharging or bagging.
Mower deck is clogged
Clean out the mower deck
(page 14).
Air filter is clogged
Clean or replace the air filter
(page 12).
Bad fuel; mower stored without
treating petrol, or refueled with bad
petrol
Refuel with fresh petrol
(page 7).
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc.
Take the mower to an
authorised Honda servicing
dealer for repair.
UNLOCKED
1. Turn the handlebar adjust knobs 90 degrees to unlock the locating
pins 
2. Fold the handlebar forward ; do not pinch or kink the cable.
Removing From Storage
When unfolding the handlebar, be sure to lock the handlebar adjust
knobs to secure the handlebar in the mowing position.
Check your mower as described in “BEFORE EACH OPERATION” on
page 4.
Correction
If the cylinder was coated with oil during storage preparation, the
engine may smoke briefly at startup.
15
Vibration
Possible Cause
TECHNICAL INFORMATION
Correction
Grass and debris lodged under the
mower deck
Clean out the mower deck
(page 14).
Blades loose
Tighten loose blade bolts
(page 11).
Blades bent, damaged, or
unbalanced by improper
sharpening
Take the mower to an
authorised Honda servicing
dealer for repair.
Serial Number Locations
Mechanical damage, such as a
bent crankshaft
Mowing and Bagging Problems
Possible Cause
ENGINE
SERIAL NUMBER
MODEL NAME AND
FRAME SERIAL NUMBER
Correction
Mower is moving too fast for lawn
conditions
Adjust the Select Drive knob
toward MIN position (page 9).
Cutting height adjustment levers
set at different positions
Set all levers at the same
cutting height position
(page 6).
Grass bag clogged
Wash the grass bag
(page 14).
Mower deck is clogged
Clean out the mower deck
(page 14).
Blades dull, worn, or damaged
Sharpen or replace the
blades if necessary
(page 11).
Wrong blades installed
Install correct blades
(page 11).
CONFORMS TO ANSI B 71.1-SAFETY STANDARD
HRX2175HZA
MAGA –– XXXXXXX
GH
AMERICAN HONDA MOTOR CO., INC.
There are two serial numbers, one for the engine and one for the
mower frame. Record the engine and frame serial numbers in the
space below. You will need these serial numbers when ordering parts
and when making technical or warranty inquiries.
Engine serial number: _________________________________
Frame serial number: __________________________________
Date of purchase: _____________________________________
High Altitude Operation
At high altitudes, the standard carburetor air-fuel mixture will be too
rich. Performance will decrease, and fuel consumption will increase. A
very rich mixture will also foul the spark plug and cause hard starting.
Operation at an altitude that differs from that at which this engine was
certified, for extended periods of time, may increase emissions.
High altitude performance can be improved by specific modifications
to the carburetor. If you always operate your lawn mower at altitudes
above 1,500 metres, have your servicing dealer perform this
carburetor modification. This engine, when operated at high altitude
with the carburetor modifications for high altitude use, will meet each
emission standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease
about 3.5% for each 300-metre increase in altitude. The effect of
altitude on horsepower will be greater than this if no carburetor
modification is made.
NOTICE
When the carburetor has been modified for high altitude operation,
the air-fuel mixture will be too lean for low altitude use. Operation at
altitudes below 1,500 metres with a modified carburetor may cause
the engine to overheat and result in serious engine damage. For use
at low altitudes, have your servicing dealer return the carburetor to
original factory specifications.
16
Specifications
Maintenance
Mower Features
HRX2175HZUA
Fuel
Honda rotary mower, 530mm mower deck,
self-charging electric start, Clip Director,
hydrostatic transmission, blade brake clutch,
Auto Choke System
Dimensions and Weights
Length
1825mm
Width
585mm
Overall height *
1115mm
Dry weight
46.1kg
Cutting width
530mm
Cutting heights (7)
20 ~ 102mm
Grass bag
capacity
88L
Noise level
< 75 dB(A) @ 7.5(m) LpA
* 1-1/4 inch cutting height and handle in highest position
Engine Design and Performance
Model
GCV190
Type
4-stroke, overhead-cam,
single-cylinder, air-cooled
Displacement
Bore and stroke
Compression ratio
Ignition system
Unleaded petrol with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
page 7
Capacity: 0.93 litres
See “AVOIDING FUEL-RELATED
PROBLEMS” on page 18
Blade Bolt
Torque
49 ~ 59N•m
page 11
Engine Oil
SAE 10W-30, API SJ or later
page 12
Capacity: 0.50 litres
Refill amount: 0.35 ~ 0.40litres*
Spark Plug
Type: NGK - BPR5ES
Gap: 0.7 ~ 0.8mm
page 13
Maximum
Governed
Speed
3,100 +0/-150rpm **
Shop
manual
Valve
clearance
(cold)
Intake: 0.15 ± 0.04mm
Exhaust: 0.20 ± 0.04mm
Shop
manual
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level (page 6).
** Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.
186cm3
69.0 x 50.0mm
8.5:1
Transistorized magneto
Transmission Design and Performance
Transmission type
Ground speeds
Variable speed
0 ~ 1.80m/s
17
AVOIDING FUEL-RELATED PROBLEMS
When properly maintained, your Honda powered product should provide years of trouble-free operation. This includes the fuel system.
However, petrol can quickly deteriorate (in as little as 30 days) causing starting or running problems and, in some cases, damage to the fuel
system. Most fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performance
problems resulting from deteriorated petrol are not covered by the Limited Warranty (see page 22).
Follow These Precautions to Prevent Most Fuel-Related Problems
During the Normal Mowing Season
Reason
Do not use petrol containing more than 10% ethanol (E10). Not all
automotive fuel is safe to use in your power product.
Higher levels of ethanol in fuel attract water, and can corrode or
damage the fuel system and cause performance problems.
Store fuel in a clean, plastic, sealed container approved for fuel
storage.
Store your fuel supply container away from direct sunlight; if the
container has a vent, keep it closed.
A plastic container eliminates the risk of rust and metallic
contaminants from a metal container entering the fuel system.
fuel will deteriorate faster when exposed to air and sunlight.
Purchase only enough fuel to last for 1 to 2 months (about 30 to 60
days).
If you purchase enough fuel to last for more than 60 days, add a fuel
stabilizer to your storage container when you fill it.
Fuel deteriorates with age so try to avoid storing it for long periods,
especially in summer heat.
Fuel stabilizer will extend the shelf life of fuel, but it will not
reconstitute stale fuel.
Keep your product’s fuel tank full of fresh fuel when not in use. Turn
the fuel valve OFF.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Keep the air filter clean and properly serviced. Check it before each
use.
A properly maintained air filter will help prevent dirt from entering the
carburetor. The small passages inside the carburetor can become
blocked.
3 to 4 Weeks Before Next Use
Reason
Keep your product’s fuel tank full of fresh fuel when not in use. Turn
the fuel valve OFF.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Turn the fuel valve to the OFF position, start the engine and let it run
approximately 3 minutes until the carburetor is empty and the
engine stops.
The small amount of fuel in your engine’s carburetor will deteriorate
faster than the fuel in the fuel tank due to its small volume and heat
from the engine.
1 to 3 Months Before Next Use
Reason
If you did not add fuel stabilizer to your fuel storage container when
you filled it up, fill your product’s fuel tank with fresh fuel.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Add fuel stabilizer to the product’s fuel tank according to the
stabilizer manufacturer’s instructions.
Fuel stabilizer will extend the life of fuel, but it will not reconstitute
stale fuel.
Run the engine outdoors for 10 minutes.
This makes sure treated fuel has replaced untreated fuel throughout
the fuel system.
Turn the fuel valve to the OFF position, start the engine, and let it
run approximately 3 minutes until the carburetor is empty and the
engine stops.
The small amount of fuel in your engine’s carburetor will deteriorate
faster than the fuel in the fuel tank due to its small volume and heat
from the engine.
More Than 3 Months Before Next Use
Start the engine and let it run long enough to empty all the fuel from
the entire fuel system, including the fuel tank.
Do not allow fuel to remain in your product’s fuel tank for more than
3 months (about 90 days) of inactivity.
18
Reason
All fuel stabilizers have a shelf life. It is good practice to empty the
fuel system for long term inactivity.
CUSTOMER INFORMATION
Parts, Accessories, and Service Items
Contact an authorised Honda servicing dealer to purchase any Honda
Genuine items for your lawn mower.
Dealer Locator Information
To find an authorised Honda Servicing Dealer anywhere in Australia:
Visit http://dl.hondampe.com.au and click on POWER EQUIPMENT.
How to Contact Honda
Honda Power Equipment dealership personnel are trained
professionals. They should be able to answer any question you may
have. If you encounter a problem that your dealer does not solve to
your satisfaction, please discuss it with the dealership's management.
The Service Manager or General Manager can help. Almost all
problems are solved in this way.
If you are dissatisfied with the decision made by the dealership's
management, contact the Honda Power Equipment Customer
Relations Office:
Honda Australia Motorcycle & Power Equipment
1954 Sydney Road, Campbellfield
Victoria, Australia 3061
Ph: 1300 559 846
or if calling from a mobile please call (03) 9270 1348
Monday to Friday, 8:00 a.m. - 7:00 p.m. EST
9:00 a.m. ~ 1:00 p.m. Saturday
enquire via weblink: contact.hondampe.com.au
email: [email protected]
website: www.hondampe.com.au
When you write or call, please give us this information.
•
•
•
•
•
•
Model and serial numbers (page 16)
Name of the dealer who sold the lawn mower to you
Name and address of the dealer who services your lawn mower
Date of purchase
Your name, address, and telephone number
A detailed description of the problem
Honda Publications
These publications will give you information for maintaining your lawn
mower.
Owner’s Manual
Keep this owner’s manual handy so you can refer to it at any time.
Consider this owner’s manual a permanent part of the lawn mower;
please give it to the new owner if you resell the lawn mower.
The information and specifications included in this publication were in
effect at the time of approval for printing. Honda Motor Co., Inc.
reserves the right, however, to discontinue or change specifications or
design at any time without notice and without incurring any obligation
whatever. No part of this publication may be reproduced without
written permission.
19
Service Record 1st Year
1st Month or 5 Hour Service
Hours Use
(Tanks x Hrs/Tank)
Date
1st 25 Hour Service
Notes
Servicing Dealer Stamp
Hours Use
(Tanks x Hrs/Tank)
Date
Servicing Dealer Stamp
Date:
Date:
Every 6 Months or 50 Hour Service
Hours Use
(Tanks x Hrs/Tank)
Notes
Date
Notes
Every year or 100 Hour Service
Hours Use
(Tanks x Hrs/Tank)
Date
Notes
Servicing Dealer Stamp
Servicing Dealer Stamp
Date:
Date:
Here is an easy way to keep track of the hours your Honda lawn mower has done. Record how many hours you get from a tank of fuel, and then simply
record the number of tanks used. TANK x HOURS per TANK = TOTAL HOURS USE. (Refer to the Maintenance Schedule on page 10).
20
Service Record
Every 2 years or 150 Hour Service
Hours Use
(Tanks x Hrs/Tank)
Date
Notes
Servicing Dealer Stamp
Next Service
Hours Use
(Tanks x Hrs/Tank)
Date
Servicing Dealer Stamp
Date:
Date:
Next Service
Hours Use
(Tanks x Hrs/Tank)
Notes
Next Service
Date
Notes
Servicing Dealer Stamp
Hours Use
(Tanks x Hrs/Tank)
Date
Notes
Servicing Dealer Stamp
Date:
Date:
Here is an easy way to keep track of the hours your Honda lawn mower has done. Record how many hours you get from a tank of fuel, and then simply
record the number of tanks used. TANK x HOURS per TANK = TOTAL HOURS USE. (Refer to the Maintenance Schedule on page 10).
21
LIMITED WARRANTY
Honda Power Equipment
This warranty is limited to the following Honda Power Equipment products when
distributed by Honda Motor Co., Inc., Power Equipment Division.
PRODUCTS COVERED
BY THIS WARRANTY
HRX Mower and deck
LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL(1)
COMMERCIAL/RENTAL/
INSTITUTIONAL
24 months
3 months
(1) Private residential: Used in maintaining owner’s primary and/or secondary residence.
Any other use, including but not limited to informal “for hire” use, is considered
commercial/rental/institutional use.
To Qualify for This Warranty:
The product must be purchased in Australia from a dealer authorised by Honda to
sell those products. This warranty applies to first retail purchaser and each
subsequent owner during the applicable warranty time period, unless noted
otherwise.
What Honda Will Repair or Replace Under Warranty:
Honda will repair or replace, at its option, any part that is proven to be defective in
material or workmanship under normal use during the applicable warranty time
period. Warranty repairs and replacements will be made without charge for parts or
labor. Anything replaced under warranty becomes the property of Honda Motor
Company, Inc. All parts replaced under warranty will be considered as part of the
original product, and any warranty on those parts will expire coincident with the
original product warranty.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment product, and proof of
purchase to any Honda Power Equipment dealer in Australia who is authorised to
sell and/or service that product, during the dealer’s normal business hours. To
locate a dealer near you, visit our web site at http://dl.hondampe.com.au and click
on POWER EQUIPMENT.
If you are unable to obtain warranty service or are dissatisfied with the warranty
service you receive, contact the owner of the dealership involved;
normally this will resolve the problem. However, if you should require further
assistance, write or call the Power Equipment Customer Relations Department of
Honda Motor Co., Inc. See “How to Contact Honda” on page 19.
Exclusions:
1. Any damage or deterioration resulting from the following:
•
•
•
•
•
•
•
2.
3.
4.
5.
22
Neglect of the periodic maintenance as specified in this manual
Improper repair or maintenance
Operating methods other than those indicated in this manual
The use of non-genuine Honda parts, accessories, lubricants, and fluids other
than those approved by Honda
Exposure of the product to soot and smoke, chemical agents, bird droppings,
sea water, sea breeze, salt or other environmental phenomena
Collision, fuel contamination or deterioration, neglect, unauthorised alteration,
misuse, incorporation or use of unsuitable attachments or parts
Normal wear and tear (including, but not limited to, normal fading of painted or
plated surfaces, sheet peeling, and other natural deterioration)
Consumable parts: Honda does not warrant parts deterioration due to normal
wear and tear. The following parts are not covered by warranty (unless they are
needed as a part of another warranted repair): spark plug, fuel filter, air cleaner
element, clutch disc, tyre, wheel bearing, recoil starter rope, cable, belt, cutter
blade, oil, and grease.
Cleaning, adjustment, and normal periodic maintenance work (carburetor
cleaning, engine oil draining, blade sharpening, belt and cable adjustments).
Any product that has ever been declared a total loss or sold for salvage by a
financial institution or insurer.
Auger and paddle assemblies of snow throwers, tiller tines of roto-tillers, mower
blades and mower deck housings, are specifically not warranted against impact
damage, including but not limited to, abrasive damage.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
Honda disclaims any responsibility for loss of time or use of the product,
transportation, commercial loss, or any other incidental or consequential damage.
Any implied warranties are limited to the duration of this written limited warranty.
Some states do not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages, so
the above exclusions and limitations may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to
state.
Honda Parts, Accessories, and Apparel
What Honda Will Repair or Replace Under Warranty:
Honda will repair or replace, at its option, any Honda Power Equipment parts,
accessories, replacement parts, or apparel that are proven to be defective in
material or workmanship under normal use during the applicable warranty time
period. Anything replaced under warranty becomes the property of Honda Motor
Company, Inc. The warranty on all parts, accessories, and apparel replaced under
warranty will expire coincident with the original warranty on the replaced parts,
accessories, or apparel.
Parts and accessories installed by a dealer who is authorised by Honda to sell them
will be repaired or replaced under warranty without charge for parts or labor. If
installed by anyone else, parts and accessories will be repaired or replaced under
warranty without charge for parts, but any labor charges will be the responsibility of
the purchaser.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment product, and proof of
purchase to any Honda Power Equipment dealer in Australia who is authorised to
sell and/or service that product, during the dealer’s normal business hours. To
locate a dealer near you, visit our web site at http://dl.hondampe.com.au and click
on POWER EQUIPMENT.
Exclusions:
This warranty does not extend to parts, accessories, or apparel affected or
damaged by collision, normal wear, use in an application for which the product was
not designed or any other misuse, neglect, incorporation or use of unsuitable
attachments or parts, unauthorised alteration, improper installation, or any causes
other than defects in material or workmanship of the product. Installing parts and
accessories on non-Honda products or engines voids this warranty.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
Honda disclaims any responsibility for loss of time or use of the product, or the
power equipment on which the product is installed, transportation, commercial loss,
or any other incidental or consequential damage. Any implied warranties are limited
to the duration of this written warranty. Some states do not allow limitations on how
long an implied warranty lasts and/or do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusions and limitations may
not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
PWL50623-AUS
23
www.hondampe.com.au
HPE.2014.06
Printed in U.S.A.