DM-16-ST-16M Fiber Connection Outlet 16 port ST Simplex MultiMode fiber connection outlet Features 16 port Simplex 16 x MultiMode adaptors installed UNIGATE CL-ProfibusDP ST connections Protocol Converter / Gateway from serial interface to ProfibusDP 160mm x 160mm x 80mm Gland & fiber clips included Specifications Box for desk, wall, or underfloor mounting of fiber terminations Comes with 16 x ST Simplex MultiMode adaptors installed Ports numbered for identification 19mm knock out gland holes on 3 blank sides for cable entry 1.2mm zintec finished light grey RAL 7035 IncludesThe cable gland for 4-10mm cable Deutschmann UNIGATE Gateway connects devices, such as automation components via their serial interface (RS232, RS485, RS422, SSI) with ProfibusDP networks. With it the UNIGATE takes over the task Size 160mm x 160mm x 80mm of a Protocol Converter and converts the different interfaces. Marketable standard protocols, such as Modbus ASCII, Modbus RTU (Master or Slave), RK 3964, RK 3964R, Universal 232, Transparent mode and many more can be set by means of a simple configuration via the PC-tool WINGATE. The UNIGATE CL ProfibusDP is exceptionally flexible and powerful because of its Scriptup ability it is suitable for and also Other variants available upon request: for SC connectors, toand 8 Duplex ports requirements that go beyond the standard protocols or for the conversion of your own protocols. This Script Single Mode fiber with the free PC-tool Protocol Developer and it is optimally adapted to the final product and is generated requirements of the PROFIBUS-Master. No changes have to be made in the final product's firmware. Also available: 4 port and 8 port ST Simplex outlet box for Application Ordering Information Deutschmann UNIGATE ProfibusDP is ideal for the use with terminal-units that do not have their own Profibus-interface. The standard DIN-rail version features the protection type IP24. DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet Scope of functions The Deutschmann UNIGATE Gateway uses the complete data capacity of ProfibusDP, that is 244 byte and supports all speeds up to a maximum of 12 Mbit/s. The complete performance range of a Profibus Slave is supported by UNIGATE. For the Profibus-connection a 9-pole D-SUB connector is provided, the connection of the serial side is made through screw-plug-connector. The Profibus ID can either be set by means of the integrated rotary coding switch, through the Profibus itself or the Script. A large number of diagnosis LEDs signal the state of the device on the Profibus-side as well as on the serial side. The special advantage of the UNIGATE CL-series is the Script-ability. Thus any changes in the firmware of the terminal-unit are not necessary. Due to the Script the user has all liberties and possibility, from a simple transparent data transfer over the generation of complex protocols up to editing data. Tel: 0203 086 9569 Fax: 0203 002 5648 www.industrialcomms.co.uk [email protected] DM-16-ST-16M Your advantage Fiber Connection Outlet With Deutschmann UNIGATE CL-modules you bring existing components (also older devices) into modern networks. As device manufacturer you save the development of the interface based on the corresponding Fieldbus or Ethernet. Due to the continuity of the Deutschmann UNIGATE CL-series Scripts that have been generated once can be used practically without changes for other types of the Unigate CL-series based on other Fieldbuses and Ethernet. The firmware adaptation of your own terminal-units becomes unnecessary. 16 port ST Simplex MultiMode fiber connection outlet Features Hotline and Support team of qualified specialists will assist you with the selection of the device, start-up, configuration and the 16 port A Simplex generation of the Script. This offer is completed by trainings to the different subject areas. 16 x MultiMode adaptors installed Quick info UNIGATE CL-ProfibusDP ST connections Supports ProfibusDPV0, DPV1and DPV2 160mm x Max. 160mm x 80mm 244 byte input- and 244 byte output-data Support of upincluded to 12Mbaud in the Profibus (autodetect) Gland & fiber clips Isolated Profibus RS485-interface, optional galvanic isolation of the RS-side Serial RS232, RS 422-, RS485- and SSI-interface on board Baudrate of the device's serial interface adjustable up to 625,000 bit/s When using the RS485-device interface up to 32 participants can be connected Configurable for standard applications (Modbus ASCII, Modbus RTU Master or Slave, RK512, 3964, 3964R, DIN 19244) or programmable through the Deutschmann Script language Generation of the Script through the free Protocol Developer No change in the Firmware of your terminal-unit necessary Specifications Exchangeable for other Deutschmann Fieldbus Gateways and the types based on Ethernet Box for desk, wall, or underfloor mounting of fiber terminations Comes with 16 x ST Simplex MultiMode adaptors installed Technical data Ports numbered for identification Dimensions 23 x 115 19mm knock out gland holes on x3100 blank sides for cable entry (BxDxH in mm) 1.2mm zintec finished light grey RAL 7035 Mounting DIN-rail Voltage gland supply for 4-10mm 10 up to 33cable Volt DC Includes cable Protection against incorrect polarity, short circuit and overload integrated Size 160mm x 160mm x 80mm Current Typ. 120mA, max. 150mA Also available: 4 port and 8 port ST Simplex outlet box consumption Operating -20°C up to +70°C Other variants available upon request: for SC connectors, up to 8 Duplex ports and also for temperature Single Mode fiber Fieldbus functions All specified ProfibusDP Slave functions Technology ASIC Certificates Profibus, CE division OrderingGalvanic Information Optional for the serial side, standard for the bus side DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet Order data Order designation Description UNIGATE CLPBDPV1 DIN-rail module with seral interface RS232, 422 and 485 on-board to Profiibus. Additional Debug-interface, Housing sky blue RAL 5015 V3553 UNIGATE CL-GYPBDPV1 DIN-rail module with seral interface RS232, 422 and 485 on-board - V3781 Tel: 0203 086 9569 Fax: 0203 002 5648 Order no. www.industrialcomms.co.uk [email protected] to Profiibus. Additional Debug-interface, 7035 DM-16-ST-16MHousing light grey RAL Fiber Connection Outlet Optional Galvanic separation RS-side (RSInterface) on request Optional Customized design on request Starterkit Unigate CL-PBDPV1 Starterkit Unigate CL-CANopen includes 1 Unigate CL-DPV1, debug cable, application cable, adapter cable PC, power supply, Manual, Software P1077, P1077E Add-On ProfibusDPV0 consisting of ProfibusDPV0 simulator, cable, software P1047, P1047E Add-On ProfibusDPV1 consisting of ProfibusDPV1 simulator, cable, software P1089, P1089E 16 portOptional ST Simplex MultiMode fiber connection outlet Neutral version on request Features 16 port Simplex Add-On ProfibusDPV0 16 x MultiMode adaptors installed Add-On ProfibusDPV1 ST connections USB-RS232 USB-RS232 Converter, 20cm V3654 USB-RS232 USB-RS232 Converter incl. adapter cable P1208 160mm xConverter 160mm x 80mm Gland & fiber clips Converter incl.included for Unigate CL-Range adapter cable Specifications Box for desk, wall, or underfloor mounting of fiber terminations Comes with 16 x ST Simplex MultiMode adaptors installed Ports numbered for identification 19mm knock out gland holes on 3 blank sides for cable entry 1.2mm zintec finished light grey RAL 7035 Includes cable gland for 4-10mm cable Size 160mm x 160mm x 80mm Also available: 4 port and 8 port ST Simplex outlet box Other variants available upon request: for SC connectors, up to 8 Duplex ports and also for Single Mode fiber Ordering Information DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet Tel: 0203 086 9569 Fax: 0203 002 5648 www.industrialcomms.co.uk [email protected]
© Copyright 2024