Force sensor FS13CXK-x-ICA™ Certified CE R 021,725,1*62/87,216 Scope of delivery: FS13CXK-x-ICA™, connection cable 5 m, mounting set (preload shim, locating bush and mounting screw) Order options FS13CXK-ICA Part# 504033 (straight cable outlet) FS13CXK-x-ICA™ Dimensions (HxBxT in mm) Weight Housing Protection class Temperature range Relative humidity Cable FS13CXK-R-0-ICA (angeled cable outlet 0°) Part# 504034 FS13CXK-R-270-ICA (angeled cable outlet 270°) Part# 504035 10 x 57 x 25 approx. 30 g stainless Steel IP67 Operation 0 bis 60 °C Storage: -10 bis 70 °C 0 to 95 % non-condensing Cable 7-wire with internal shielding, PUR (polyurethane) covering, approx. 5m long CE, CSA, ETL ± 15 V DC ± 5 V DC Certification Voltage supply Outout voltage Output impedance Reset time Signal noise Current consumption <100 Ω max. < 1 ms (< 1 kHz): < 2 mV effectively single axis sensor: approx. 7 mA three axis sensor: approx. 11 mA Sensivity, 2 selectable ranges Linearity Hysteresis Overload capability: Range I (low gain): Fx,Fy: 500 N/V, Fz: 1000 N/V Range II (high gain): Fx,Fy: 100 N/V, Fz: 200 N/V ≤ ±1 % FSO ≤ ±1 % FSO 6 kN at 25 kN preload All warnings and other important, detailed information must be obtained from the operating manual. This document is not subject to an automatic revision service. Montronix GmbH Telephone: +49 7062 6793 00 BDS-SensorFS13ICA-en-150116 Benzstr. 7 Fax: +49 7062 6793 10 Version: 4.00 D-71720 Oberstenfeld E-Mail: [email protected] Germany Internet: www.montronix.de Page 1 of 1