Bidet LUXE Bidet LUXE Bidet LUXE Bidet LUXE LUXE Bidet LUXE Bidet Assembly Instruction LUXE LUXE R LUXE LUXE LUXE LUXE TM Bidet R NEO250 & NEO320 NAMES AND FUNCTIONS OF PARTS TM *Please note: illustrations may vary depending on the model Water Flow Control Handle Nozzle Mode Knob Cold & Hot Water Inlet Adjustable Plates Toilet Water Supply Valve 1 Shut off the toilet water supply. Flush toilet to empty the tank. 2 Remove the seat by unscrewing the seat. Place the bidet on the toilet. Plates may be adjusted depending on where the two holes in the back of the toilet are. Top View of Toilet Installation Tools You May Need Wrench Femine Nozzle Wash nozzle Nozzle Guard Gate Screwdriver(flat) PARTS Flexible Metal Braided Hose (Cold Water) 1/2” T-Adapter Connection Plastic T-Adapter (Cold Water) Rubber Washer 15/16” Toilet Tank Connection 22” Length 1/2” Bidet Hose Connection 1/4” Bidet Connection 15/16” Toilet Hose Connection Metal T-Adapter Sink Hose Connection (Hot Water) 3/8” Bidet Hose Connection 8 mm Sink Water Connection (Wall Outlet) 3/8” Wing Nut Rubber Washer Polyurethane Hose (Hot Water) 1/4” Bidet Metal Connection Wing Nut 8 mm Metal T-Adapter Connection 10’ Length OPTIONAL PARTS Flexible Water Supply Hose 15/16” Toilet Tank Connection 3 Note: You may not need to use this part from the kit since a typical water connection is a flexible metal hose with a15/16” toilet tank connection and 9/16” toilet water supply connection. 9/16” Toilet Water Supply Connection Hot Water Inlet Cap with Rubber Washer Note: You only need this part if you do not connect the hot water. See troubleshooting for more details. 4 Bidet should now be aligned with the coupling holes. 5 Screw the seat back on to the bidet and the toilet. Bidet LUXE Bidet LUXE Bidet LUXE Bidet LUXE LUXE Bidet LUXE Bidet Assembly Instruction LUXE LUXE LUXE LUXE LUXE 6 Preparing the Plastic T-Adapter 6a TM Bidet NEO250 & NEO320 R TM Rubber Washer 6b 6a: Make sure that there is a black rubber washer inserted at the top of the t-adapter. 6b: If it is not already there, insert it as shown in figure 6b. 7 LUXE R 8 Connect the metal braided hose to the plastic t-adapter. Connecting Cold Water Supply Toilet Water Supply Valve 7a The top of the t-adapter connects with the water tank. Toilet Water Supply Valve 7b 7a: Make sure you have shut off the toilet water supply and flushed the toilet to empty the tank. Disconnect the water connection from the tank. 7b: Connect the plastic t-adapter to the water supply as shown in figure 7b. Tip: Do not use excessive force while tightening the connection. Hand tighten then use a wrench to gently tighten one quarter or half-turn more. 9 Toilet Water Supply Valve Connect the metal braided hose to the cold water bidet inlet Bidet LUXE Bidet LUXE Bidet LUXE Bidet LUXE LUXE Bidet LUXE Bidet Assembly Instruction LUXE LUXE LUXE LUXE LUXE 10 Preparing the Metal T-Adapter 10b 10a 11 Connecting Hot Water Supply Bidet LUXE R TM NEO250 & NEO320 10a: Make sure that there is a black rubber washer inserted at the bottom of the t-adapter. 10b: If it is not already there, insert it as shown in figure 10b. ASSEMBLED UNIT R TM Rubber Washer Metal T-Adapter (Hot Water) Metal T-Adapter Toilet Water Supply Valve 11a 11b 11a: Disconnect the sink hot water connection. 11b: Connect the metal t-adapter on the hot water connection. 11c 11d OPTIONAL: Cut polyurethane hose on the end that does not have a wing nut according to bathroom dimensions. Bidet Polyurethane Hose (Hot Water) Cold Water Connection Hot Water Connection Plastic T-Adapter (Cold Water) Sink Sink Hot Water Valve Back View of Bidet Cold Hot 11e Flexible Water Supply Hose Cold Water Valve TRYING YOUR BIDET FOR THE FIRST TIME Congratulations! You are ready to use the LuxeBidet for the first time. Gently turn the water pressure control knob to reach your desired spray pressure. The control only regulates water pressure, not the duration of the spray. The working pressure of this product is 50+20 psi For more information, visit www.LuxeBidet.com. 11f 11c: Unscrew the wing nut from the metal t-adapter. 11d: Thread the polyurethane hose through the wing nut and push the end onto the adapter. 11e: Tighten the wing nut onto the t-adapter threads to secure the connection. 11g: Attach the metal end of the hose to the hot water bidet inlet. C 2Go Products, LLC Bidet LUXE Bidet LUXE Bidet LUXE Bidet LUXE LUXE Bidet LUXE Bidet Assembly Instruction LUXE LUXE R LUXE LUXE LUXE LUXE TROUBLESHOOTING For additional troubleshooting tips, please see our FAQs page at www.LuxeBidet.com. Connecting the hot water supply hose. If you have trouble pushing the polyurethane hose onto the t-adapter, hold the hose end under hot running water to expand it slightly and try again. If you need a hose longer than 10 feet, you may purchase a 16 foot 8 mm polyurethane hose at www.LuxeBidet.com/accessories. Using the bidet with only cold water. To use the bidet with only the cold water connected, screw the bidet inlet cap included with the accessories onto the hot water bidet inlet. This will prevent any backflow while the bidet is operated. After installing the bidet, the toilet seat sits at an angle and no longer rests on the toilet bowl. TM NEO250 & NEO320 Solution 1: Gently pump the nozzle up and down by hand. It may simply be stuck. Solution 2: Check that the t-adapter has been drilled all the way through so water can flow through it. If the t-adapter is blocked, please contact us for a replacement. Water is leaking from a connection. Solution 1: Try reconnecting the t-adapter to ensure that all threads are catching properly and that the connection is properly tightened. Solution 2: If you have difficulty properly tightening the t-adapter, try wrapping a thin layer of plumbing tape over the toilet tank or sink valve threads before connecting the t-adapter. The plumbing tape will allow for added grip. Solution 3: If you continue to experience a drip from the t-adapter or any other connection, please contact us. For other questions or concerns, please contact us at www.LuxeBidet.com TM OPTIONAL ACCESSORIES Available for Purchase at www.LuxeBidet.com/accessories 16’ Polyurethane Hose (Hot Water) Bidet Connection 9’ Metal Braided Hose (Hot Water) Bidet Connection 1/4” Metal Wing Nut 1/4” Metal Wing Nut 8 mm Metal T-Adapter Connection 8 mm Metal T-Adapter Connection This polyurethane hose is a longer version of the hose included with the bidet. The polyurethane hose included with the bidet for hot water connection can be replaced with this 9’ metal braided hose. Please note that the length cannot be adjusted. Metal T-Adapter Metal T-Adapter with Shut-Off Valve Apply adhesive rubber bumpers to the bottom of the seat to eliminate the gap. Bumpers are available for purchase when you go to www.LuxeBidet.com/accessories. When the bidet is on, no water comes out of the spray nozzle. Bidet R (Hot Water) (Cold Water) Sink Hose Connection 1/2” Rubber Washer Bidet Hose Connection 15/16” Toilet Tank Connection 8 mm Sink Water Connection (Wall Outlet) 1/2” Shut-Off Valve Wing Nut Rubber Washer 1/2” Bidet Hose Connection 15/16” Toilet Hose Connection Some households have a 1/2” hot water connection rather than the provided 3/8”. This metal t-adapter has a shut-off valve to limit or cut off cold water to the bidet. It can be used instead of the plastic t-adapter for the cold water connection. For more information, visit www.LuxeBidet.com. C 2Go Products, LLC
© Copyright 2024