Tender Civil Electrical and Services BOQ

S.N.
1
2
3
4
5
6
ABSTRACT SHEET
DETAIL
DISMANTALING WORK
NEW CIVIL AND FINISHING WORK
TOILET
PASSAGE & OTHERS
SERVICES
ELECTRICAL
TOTAL IN FIGURES :
AMOUNT IN Rs.
TOTAL IN WORDS :
1
Demolition work
S.N.
DESCRIPTION OF ITEM
UNIT QTY.
SCHEDULED ITEM
DISMANTLING WORK
1
2
3
4
5
6
7
8
9
1
2
Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and Cum
disposal of unserviceable material within Campus as per direction of Engineer-in-charge. In Cement mortar
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of
rubbish to the dumping ground within campus
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within campus.
thickness of tiles above 25 mm and upto 40 mm
Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within
campus as per direction of Engineer - in- charge.
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. Work.
Dismentling of wall tile laid in cement mortar and disposal of unserviceable material within campus
Dismantling G.I. water pipe with fittings and clamps including stacking the material within campus
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within
campus
Electrical conduits and wires
TOTAL SCHEDULED ITEM
Sqmt
746
Sqmt
643
Cum
11
KG
Sqmt
170
70
Rmt
Rmt
226
94
Rmt
240
NON SCHEDULE ITEM
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, Sqmt
architrave, holdfasts etc. complete and stacking within campus
Dismantling aluminium doors, windows and shutter including chowkhats, architrave, holdfasts etc. complete Sqmt
and stacking within campus.(Equipment room)
TOTAL SCHEDULED ITEM
GRAND TOTAL
2
102
108
4
RATE
AMOUNT
NEW CIVIL WORK
S.N.
DESCRIPTION OF ITEM
UNIT
QTY.
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation
trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and
ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus
excavated soil as directed, within th campus) All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and
shuttering -All work upto plinth level: 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm
nominal size)
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1
cement : 6 coarse sand)
Filling-: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in
layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in
all shapes and sizes in : 1:6 ( 1 cement: 6 course sand)
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor
V level in 1:4( 1 cement : 4 course sand)
Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick
masonry (with F.P.S.bricks).
12 mm cement plaster of mix : 1: 6 (1 cement: 6 fine sand)
FINISHES
Providing and laying Vitrified tiles in floor of size 600X600mm of thikness 8mm, with water absorption less
than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid
with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in
average 6mm thickness, including grouting of joints with white cement &matching pigments etc. complete..
Basic cost of tile Rs.60/- per sqft
Cum
140
Cum
32
Cum
8
Cum
68
Cum
90
Sqmt
145
rmt
145
Sqmt
1100
Sqmt
607
NEW CIVIL WORK
1
2
3
6
7
8
8.a
9
10
3
RATE
AMOUNT
S.N.
11
12
DESCRIPTION OF ITEM
UNIT
Providing and laying Vitrified tiles of size 600X600mm of thikness 8mm, with water absorption less than Sqmt
0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,
over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with
white cement & matching pigments etc. complete. Basic cost of tile Rs.60/- per sqft
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by Sqmt
QTY.
157
96
the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size
as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including
13
14
15
16
17
18
pointing in white cement mixed with pigment of matching shade complete. Basic Cost of tile Rs.45/- per sqft
Kota stone slab flooring and skirting over 20 mm (average) thick base laid over and jointed with grey cement
slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with
base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 18mm thick kota stone
Providing and fixing chowkhats of doors, windows, clerestory windows and other frames , wrought framed
and fixed in position in existing opening including embedding chowkhats in floors or walls cutting masonry
for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including painting two
coats of enamel paint on sides of chowkhats and making good the damages to walls and floors as required
complete, including disposal of rubbish to the dumping ground within the campus.(Seasoned Second Class
Teak wood) Section 150x 50 mm
Extra for providing lipping with 2nd class teak wood battens on all edges of shutters (over all area of door
shutter to be measured)
PAINTING
Applying one coat of cement primer of approved brand and manufacture on wall surface, cement primer
Sqmt
102
Cum
12
Sqmt
260
Sqmt
2400
Providing and applying birla putty of 2 mm thickness over plastered surface to prepare the surface even and Sqmt
smooth complete
Wall painting with plastic emultion paint of approved and manufacture to give an even shade, two or more Sqmt
coats on new work
TOTAL SCHEDULED ITEM
2400
4
2400
RATE
AMOUNT
S.N.
19
19a
19b
20
DESCRIPTION OF ITEM
UNIT
NON SCHEDULE ITEM
Providing and fixings and stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse
sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel
sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3
fine sand ) complete : 12.23.1 Red sand stone slab Iincluding fixing of steel girders and members and
rebaring with exisiting structure wherever necessary
35 to 40 mm thick
Sqmt
Structural steel section: Steel work welded in built up sections work, including cutting , hoisting, fixing in KG
position and aplying priming coat of approved steel primer using structural steel etc, in stringres, treads,
landings etc of staircases , all complete
Grid Ceiling:-Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with
DUNE/TEGULAR EDGE TILES WITH ARMSTRONG GRID. The tiles should have Humidity Resistance (RH) of
99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White,
Fire Performance Class 0/ Class 1 (BS476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block
coating on the face of the tile, suitable for Green Building application, with Recycled content of 63%.
The tile shall be laid on Armstrong grid system with 15mm white flanges incorporating a 6mm central
reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68
Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide
mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500
hrs of Salt test.
INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit
using Armstrong suspension system (specifications below) at 1200mm maximum centre & not more than
150mm from spliced joints. The First/Last Armstrong suspension system at the end of each main runner
should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked
between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than
600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross
tees centrally between the 1200 mm cross tees. The 1200mm cross tees to have central “birdsmouth”
notches to facilitate fitting of 600mm cross tees. Perimeter trim to be Armstrong shadow wall molding
(dimensions: 19x7x7x14mm), secured to walls at 450 mm maximum centres.
5
QTY.
32
1800
RATE
AMOUNT
S.N.
DESCRIPTION OF ITEM
UNIT
ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries Sqmt
QTY.
114
consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x
1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.68 mm of 1.83 m
length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of
0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable
21
22
23
24
25
26
27
28
clip also consists of a 3.5 mm aquiline wire to be used with the main runner.
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of Sqmt
block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutters , 35 mm th including P/F of 1 mm
th laminate on both faces, P/f ISI marked stainless steel butt hinges with necessary screws
Extra for providing vision panel in all type of flush doors (cost of glass included) including cost of lipping , Nos
complete in all respects ( less than 0.1 sqmt) 750x550mm
Providing and fixing chromium plated SS 100 mm mortice handle with lock set and key with necessary Sets
screws etc. complete. Doorset or approved equivalent make
Providing and fixing S.S. tower bolts with necessary screws etc.complete : 200 mm long
Nos
Providing and fixing S.S. hanging floor door stopper required colour and shade with necessary screws etc. Nos
complete.
Providing and fixing ISI marked aluminium die cast body tubular type univesal hydrolic door closers with Nos
necessary accessories and screws etc. complete
Providing and fixing 6 mm th toughned glass fixed with 50mmx 50mm 16 guage aluminium frame duly Sqmt
powder coated including all gasced, beeding and other accessaries , complete as per architectural drawing
Providing and applying two or more coats of anti fungal paint including making of proper base and one base Sqmt
coat of anti fungal primer, complete in all respects.
6
116
12
34
68
34
20
8
135
RATE
AMOUNT
S.N.
29
30
DESCRIPTION OF ITEM
UNIT
Providing and fixing powder coated (minimum thickness of powder coating 50 micron)aluminium work Sqmt
50mm x 50mm 16 gauge for doors, windows and ventilators with extruded built up standard tubular
sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC/neoprene felt /silicon etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap
beading for glazing / paneling, C.P. brass / stainless steel screws, all complete including handles , friction
hinges , stays etc. complete including filling silicon all around of frame & wall joints as per architectural
drawings and the directions of Engineer-in-charge. (Rates are inclusive of providing and fixing 5mm thick
float glass for fixed portion and 5mm thick float glass for openable portion
Repairing, removing rust, fixing damaged/missing hardware and painting with enamel of existing MS Sqmt
window frames and windows of the front façade from inside and outside. (As per site requirement)
TOTAL SCHEDULED ITEM
GRAND TOTAL
7
QTY.
30
85
RATE
AMOUNT
TOILETS
S.N.
1
DESCRIPTION OF ITEM
UNIT QTY.
Finishes
Floor Tiles : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Sqmt
20
manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all
colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting
2
the joints with white cement and matching pigments etc., complete. (Basic Cost of tile Rs.60/- per sqft)
Wall tiles : Providing and laying Vitrified tiles of size 600X600mm of thikness 8mm, with water absorption Sqmt
89
less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of
steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint
3
4
5
9
with white cement & matching pigments etc. complete. (Basic cost of tile Rs.60/- per sqft)
PAINTING
Applying one coat of cement primer of approved brand and manufacture on wall surface, cement primer
Sqmt
90
Providing and applying birla putty of 2 mm thickness over plastered surface to prepare the surface even and Sqmt
smooth complete
Wall painting with plastic emultion paint of approved and manufacture to give an even shade, two or more Sqmt
coats on new work
Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC
90
90
plain and brass threded fittings including fixing the pipes with clamps@ 1mt spacing . This includes jointing
of pipes and fittings with one step CPVC solvant cement and the cost of cutting chases and making good the
10
11
12
13
same including testing of joints complete as per direction of engineer incharge.
15 mm nominal outer dia pipe
20 mm nominal outer dia pipe
25 mm nominal outer dia pipe
Providing and fixing of square mouth SW gully trap grade A' complete with CI grating brick masonry chamber
with water tight CI cover with frame of 300x300mm size(inside) the weight of cover to be not less than
4.50kg and frame to be not less than 2.70kg as per standered design:
8
Rmt
Rmt
Rmt
Nos
22
0
85
1
RATE
AMOUNT
S.N.
14
15
DESCRIPTION OF ITEM
UNIT QTY.
Providing and fixing water closet squatting pan ( indian type W.C. ) with 100mm pvc P or S trap, 10lt low
level white pvc flushing cistern with manual controlled device confirming to IS : 7231 with all fittings and
fixtures complete including cutting and making good the walls and floor wherever required
Providing and fixing white vitrous china pedestal type water closet ( European type W.C. ) with seat and lid ,
Nos
2
Nos
1
Nos
3
Nos
4
Nos
4
Nos
Nos
Nos
6
2
4
10 lt low level white pvc flushing cistern with manual controlled device confirming to IS : 7231 with all
16
17
18
19
20
21
fittings and fixtures complete including cutting and making good the walls and floor wherever required
Providing and fixing white vitrous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC
automatic flushing cistern, with fittings , standard cp brass flush pipe spreaders with union and clamp( all in
CP brass) with waste fitting as per IS 2556, pvc trap with outlet grating and other couplings in cp brass
including painting of fittings and cutting and making good the walls and floor wherever required( single half
staal urinal with 5 lt PVC automatic flushing cistern)
Providing and fixing white vitrous wash basin with C.I. bracets, 15 mm cp brass pillar taps, 32 mm cp brass
waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls
wherever required( basin size 630x450mm with single 15mm cp brass tap)
Providing and fixing uplasticised PVC connection pipe with brass unions, 30 cm long, 15mm nominal bore
Providing and fixing brass bib cock/angle valve of approved quality
Providing and fixing of 600 mm long C. P. brass towel rail complete with C.P. brass brackets
Providing and fixing CP Brass liquid soap container 109 mm wide, 125 mm high and 112 mm distance from
wall of standard shape with bracket and all fittings of the same material of approved quality and colour.
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and
vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings
(confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors,
couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor
level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling /
external work etc. including chase cutting as required, excavation and back filling in all kind of soils,
suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.
alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including cost of shuttering for proper completion of the work, breaking and making good the walls and
floors etc. after pipes have been duly laid and tested. The rubbs centrally between the 1200 mm c
9
RATE
AMOUNT
S.N.
22
a
23
DESCRIPTION OF ITEM
UNIT QTY.
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm
slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes
lines as per drawings and specifications and as directed by engg-in-charge at site.
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating
Rmt
22
Rmt
Rmt
10
16
Nos
Nos
Nos
6
4
1
Nos
4
Nos
18
Nos
1
with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends,
tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/
slabs and making good the same with cement concrete 1:2:4 complete as required.
32 mm dia.
40 mm dia.
24
a
b
c
25
26
20
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all
respects.
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet
Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser
P-Trap type Floor Trap 110 x 75 mm
Providing and fixing C.P brass bib cock of approved quality conforming to IS standards IS: 8931.
15 mm nominal bore
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved
quality conforming to IS 8931.
15 mm nominal bore
TOTAL SCHEDULED ITEM
NON SCHEDULED ITEM
Removal of toilet fittings and stacking the material within campus as directed by engineer incharge
10
RATE
AMOUNT
S.N.
21
22
23
24
DESCRIPTION OF ITEM
UNIT QTY.
Providing and fixing powder coated (minimum thickness of powder coating 50 micron)aluminium work for sqmt
windows and ventilators with extruded built up standard tubular sections/appropriate Z sections and other
sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold
fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt /silicon etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete including handles , friction hinges , stays etc. complete including
filling silicon all around of frame & wall joints as per architectural drawings and the directions of Engineer-incharge. Wall thickness of aluminium 16 guage, ( Rates are inclusive of providing and fixing 5mm thick float
glass for fixed portion and 4mm thick float glass for openable portion
Providing & fixing PVC Soil & Waste pipes ISI marked,/SWR jointed with solvent cement/rubber ring joints
including all specials such as bends, tees reducers etc., with or without door as required, including any
cutting & making good of floors/walls that may be necessary, clamps and stays as per requirements. The
cost also includes levelling of sewer pipes with sand bed (below the pipe) and with PCC covering etc
complete
110mm dia 6KG/CM2 :
Rmt
Providing & fixing tripple layer HDPE water tank Capacity of standard make such as ISI marked with suitable LTRS
2
16
2000
cover and locking arrangement including the cost of sockets and check nut for inlet out let,scour & over flow
25
26
27
pipe, valves for inlet & outlet pipes, making a PCC foundation complete in all respect.
Providing and fixing white vitrous china urinal partition complete with all necessary screw and fittings as Nos
per drawing
Providing and fixing 6 mm th mirror of approved make / quality and of required size with 6 mm th ply Sqmt
backing and 40x40 mm moulding/ beeding all around, complete
Providong and fixing granite stone for wash basins including cutting holes champhering the edges complete Sqmt
as per the direction of site incharge, Basic cost of granite, Rs 150/ sqft)
TOTAL NON SHEDULED ITEM -B
GRAND TOTAL
11
2
3
2
RATE
AMOUNT
S.N.
1
2
3
4
5
6
PASSAGE , OTHER AREA AND EXTERNAL WORK
DESCRIPTION OF ITEM
Finishes
Floor Tiles : Providing and laying Floor Tiles of minimum thickness 8 mm of approved make and colour, laid
to pattern as per drawing, set in rich cement mortar 1:4, min 40mm thick With tile grout joints of approved
width finished, in colored Epoxy tile grout, Roff chemicals/ bal/ Laticrete or equivalent make. including
cement slurry complete with oxalic acid wash. Joints to run continuous horizontally and vertically. Basic cost
Rs. 60/sqft, Seemless tiles
PAINTING
Applying one coat of cement primer of approved brand and manufacture on wall surface, cement primer
Providing and applying birla putty of 2 mm thickness over plastered surface to prepare the surface even and
smooth complete
Wall painting with plastic emultion paint of approved and manufacture to give an even shade, two or more
coats on new work
TOTAL SCHEDULED ITEM
NON SCHEDULED ITEM
Repairing of fair face brick work to match with the existing one
Fire DOOR, Constructing on site 8'.0" height and 6' 0" wide (approx) double shuttered flushed door
comprising of 1-1/2 " thk. block board finished in luster paint from one side and other side finished in 1 mm
thk. Laminate of ‘Royal Touch’, ‘Greenlam’, ‘Vir Laminates’ or equivalent brand as approved ,having a with
T.W. edging finished in melamine polish, with necessary hardware including hinges and tower bolts brushed
steel handle, , ’Godrej’/ doorset or equivalent brushed steel finish dead lock.
UNIT QTY.
sqmt
134
sqmt
178
sqmt
178
sqmt
178
sqmt
20
Nos
1
7 Providing and fixing powder coated (minimum thickness of powder coating 50 micron)aluminium work for
windows and ventilators with extruded built up standard tubular sections/appropriate Z sections and other
sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold
fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt /silicon etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed
sqmt
mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete including handles , friction hinges , stays etc. complete including
filling silicon all around of frame & wall joints as per architectural drawings and the directions of Engineer-incharge. Wall thickness of aluminium 16 guage, ( Rates are inclusive of providing and fixing 5mm thick float
glass for fixed portion and 4mm thick float glass for openable portion
TOTAL NON SHEDULED ITEM -B
TOTAL ( A+B)
12
132
RATE
AMOUNT
SERVICES
SN
DESCRIPTION OF ITEM
1
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe. Hving thermal stability for hot & cold water
supplu including all CPVC plain and brass threded fittings including fixing the pipe with clamps at 1.00m
sapcing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints
complete as per direction of Engineer in charge.
20mm nominal outer dia. Pipes( concealed)
25mm nominal outer dia. Pipes ( concealed)
32mm nominal outer dia. Pipes ( concealed)
40mm nominal outer dia. Pipes ( external)
50mm nominal outer dia. Pipes ( external)
65mm nominal outer dia. Pipes ( external)
80mm nominal outer dia. Pipes ( external)
Supply & fixing gun metal gatel valve with CI wheel of approved quality.
25mm dia
32mm dia
50mm dia
Constructing brick masonary man hole in cement mortar 1: 4 , R.C.C. top slab 1:2:4 mix, foundation concrete
1.a
1.b
1.c
1.d
1.e
1.f
1.g
2
2.a
2.b
2.c
3
UNIT
QTY
meter
meter
meter
meter
meter
meter
meter
56
0
52
34
26
50
40
Each
Each
Each
1
3
2
Each
Each
Each
6
6
1
Each
1
1:4:8 mix inside plastering 12 mm th with cement mortar 1:3 finished with floating coat of neat cement and
3.a
3.b
3.c
3.d
4
making channels in cement concrete 1:2:4 mix finished with floating coat of neat cement complete .
Inside size, 1200mmx 900 mm and 900mm deep including C.I. cover 600x600mm with frame
Extra for depth for man hole size 1200x 900 mm
Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal
dimensions, total weight of cover & frame to be not less than 38 kg (weight of cover 23 kg and weight of
frame 15 kg)
Extra for depth for man hole size 900x 800 mm
Supply & fixing in position ISI marked cast iron double flanged butterfly valves (PN 1 MPa) as per IS:13095,
with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to
worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the
Engineer-in-charge.
13
RATE
AMOUNT
SN
DESCRIPTION OF ITEM
UNIT
QTY
4.a
4.b
5
5a
5b
5c
6
65 mm nominal dia
80 mm nominal dia
Providing & fixing brass ball float valve with bronze floats of approved quality complete.
20 mm nominal dia
25 mm nominal dia
32 mm nominal dia
Excavating trenches of required width for pipes, cable, etc including excavation for sockets and dressing of
meter
meter
1
1
Each
Each
Each
1
1
1
meter
1
7
Providing, laying and jointing glazed stone ware pipes grade class SP-1 with stiff mixture of cement
mortar in the proportion of 1:1
(1cement :1 fine sand) including testing of joints etc complete.
7a
8
150 mm diameter
meter
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 gradded stone aggregate
40 mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
1
8a
9
150 mm diameter S.W.Pipe
meter
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
Each
TOTAL -A
1
sides, ramming of bottoms, depth upto 1.50m including getting out the excavated soil & then returning the
soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by
6a
9a
4
4a
ramming, watering, etc & disposing of surplus excavated soil as directed within the campus.
All kinds of soil
Pipes cables etc. exceeding 80 mm dia. But not exceeding 300mm dia.
NON SCHEDULED ITEM
Providing & installing tubing & Fittings for Nitrogen, RW,Vaccume & Zero Air Line.
Gas Controller & Purification Panel :-Powder coated with indication sticker,pressure regulator,pressure
gauges. Foer Nitrogen Misture trap with ,molecular sieve 13X and blue silica Gel.
14
Nos
1
1
RATE
AMOUNT
SN
5
DESCRIPTION OF ITEM
UNIT
Providing and fixing heavy duty SS316 12mm SS pretreated tubing with color coded sleeves including SS304 Rmt
QTY
110
pipe sch for header including SS union, SS reucing Tee, SS Male connector,SS Ball Valve,SS Flange,SS
Socket,SS Nipple ,Vaccum pressure gauge,SS Elbow,NRV,SS reducing union , SS line micronic filter,SS high
pressure manifold for holding cylinder,SS high pressure wire breaded flexible pigtails,cylinder mounting
6
bracket with crom plated chain,SS tube cap SS tube clamp,standards fittings like Nut,Ferrules etc complete.
Providing and fixing heavy duty SS316 6mm SS pretreated tubing with color coded sleeves including SS304 Rmt
30
pipe sch for header including SS union, SS reucing Tee, SS Male connector,SS Ball Valve,SS Flange,SS
Socket,SS Nipple ,Vaccum pressure gauge,SS Elbow,NRV,SS reducing union , SS line micronic filter,SS high
pressure manifold for holding cylinder,SS high pressure wire breaded flexible pigtails,cylinder mounting
bracket with crom plated chain,SS tube cap SS tube clamp,standards fittings like Nut,Ferrules etc complete.
Providing & fixing tripple layer HDPE water tank Capacity of standard make such as ISI marked with
suitable cover and locking arrangement including the cost of sockets and check nut for inlet out let,scour &
over flow pipe, valves for inlet & outlet pipes, making a PCC foundation complete in all respect. 1000lt
capacity
8
Providing and fixing HDPE pipes for Lab waste water system, as per IS 14333, PE 80 working pressure 8kg/Sq
cm, including excavating trenches, covering the pipe with cement concrete and filling the excavated portion
making good in all respects complete
8.a 50 mm dia
8.b 75 mm dia
8.c 160 mm dia
9
Making and constructing 1mt x 3 mt plateform for GDS and compressor machine with brick work all around
and concrete on top with a floating coat of neat cement including ,making & fixing MS cage from 3 sides
with MS angle & 50mmx50mm welded wire mesh for fixed & openable portion.
10 Constructing brick masonary man hole in cement mortar 1: 4 , foundation concrete 1:4:8 mix inside
plastering 12 mm th with cement mortar 1:3 finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 mix finished with floating coat of neat cement complete .
10.a Inside size 300mm x300mm 450 deep with C.I. cover
TOTAL NON SHEDULED ITEM -B
TOTAL ( A+B)
7
15
LTRS
3000
Rmt
Rmt
Rmt
Nos
30
40
52
1
Each
6
RATE
AMOUNT
Electrical
S.N.
1
1.1
a
1.2
1.3
1.4
1.5
a
b
c
d
e
f
g
h
i
j
k
1.6
a
QTY UNIT RATE
DESCRIPTION OF ITEM
WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable
GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as
required.
120 Point
Group C
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in
surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the 8 Point
point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in
surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core 2000 Metre
cable for loop earthing as required.
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in
surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core 2200 Metre
cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper
conductor, single core cable in surface/ recessed steel conduit as required
0 Metre
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
0 Metre
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
120
Metre
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
0 Metre
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
0 Metre
2 X 10 sq. mm + 1 X 10 sq. mm earth wire
0 Metre
2 X 16 sq. mm + 1 X 16 sq. mm earth wire
0 Metre
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
0 Metre
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
0 Metre
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
0 Metre
4 X 10 sq. mm + 2 X 10 sq. mm earth wire
0 Metre
4 X 16 sq. mm + 2 X 16 sq. mm earth wire
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored
telephone cable in the existing surface/ recessed steel conduit as required.
0 Metre
2 Pair
16
AMOUNT
b
1.7
1.8
a
b
c
d
e
1.9
a
b
c
1.10
a
b
c
d
e
f
i
j
1.11
a
b
c
d
4 Pair
Supplying and drawing of CAT 6 LAN Cable in the existing surface/ recessed steel conduit as required.
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including
painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit
as required.
20 mm
25 mm
32 mm
40 mm
50 mm
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of
phenolic laminated sheet cover in front including painting etc as required.
75 mm X 75 mm X 60 mm deep
100 mm X 100 mm X 60 mm deep
200 mm X 125 mm X 60 mm deep
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including
connections but excluding modular plate etc. as required.
5/6 amps switch
2 way 5/6 amps switch
15/16 amp switch
3 pin 5/6 amp socket outlet
6 pin 15/16 amp socket outlet
Telephone socket outlet
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular
plate as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular
switches in recess etc as required.
1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
4 Module (125mmX75mm)
6 Module (200mmX75mm)
17
750 Metre
1200 Metre
0
400
150
0
100
Metre
Metre
Metre
Metre
Metre
25
15
10
Each
Each
Each
0
0
240
0
240
15
Each
Each
Each
Each
Each
Each
14
Each
20
Each
40
0
0
240
Each
Each
Each
Each
e
f
1.12
1.13
1.14
1.16
2
2.1
b
c
d
2.2
a
b
c
d
e
f
8 Module (125mmX125mm)
12 Module (200mmX150mm)
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve
DP MCB complete with connections, testing and commissioning etc. as required.(For window AC)
0
0
Each
Each
0
each
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C"
0
curve TP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal
enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess,
15
with chained metal cover for the socket out let and complete with connections, testing and commissioning
etc. as required.
Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal
enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess,
3
with chained metal cover for the socket out let and complete with connections, testing and commissioning
etc. as required.
MCCB, MCB & DB'S
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on
surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits,
duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus
bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including
earthing etc. as required.(But without MCB/ RCCB/ Isolator)
1
6 way (4 + 18), Double door (Nano Lab LDB)
3
8 way (4 + 24), Double door (ChemLab, MSc Lab, Other area LDB)
0
12 way (4 + 36), Double door
Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable
for inductive load of following poles in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
60
Single pole
0
Single pole and neutral
0
Double pole
3
Triple pole
4
Triple pole and neutral
30
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
18
each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
2.3
a
b
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit
breaker (RCCB), having a sensitivity current upto 100 milliamperes in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
0
40 amps
4
63 amps
Earthing
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry
enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with 4
charcoal/ coke and salt as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing
masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. 2
with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including
10
connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including
10
connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
20
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
4
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
Supplying and making end termination with brass compression gland and aluminium lugs for following size
of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a
b
c
d
3½ X 16sq. mm (25mm)
3½ X 95 sq. mm (45mm)
3½ X 120 sq. mm (45mm)
3½ X 300 sq. mm (70mm)
Each
Each
Set
Set
Metre
Metre
Metre
80
Metre
Metre
8
10
12
2
Each
Each
Each
Each
TOTAL SCHEDULED ITEM
1
a
TOTAL -A
NON SCHEDULED ITEM
Supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size direct in Existing Cable trays including accessories etc as required.
250 Metre
4 X 16 sq. mm
19
b
2
2.1
a
b
2.2
a
b
2.3
300 Metre
3½ X 95 sq. mm
MV CABLE LAYING
Supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size direct in ground including excavation, sand cushioning, protective covering and refilling the
trench etc as required.
80 Metre
3½ X 120 sq. mm
80 Metre
3½ X 300 sq. mm
Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
0
Each
40 amps
4
Each
63 amps
Main/sub L T Distribution Panel
Supply Installation testing & commissioning of Distribution Panel made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
1
Set
outgoing feeder shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder
coated ,earthing, danger plates etc. with following acessories
Incomer -1
1 No 400A 4P MCCB with accessories
1 No Ammeter with 3CTs & ASS
1 No Voltmeter with 3 Control MCB & VSS
3 No Pse Indicating Light with 3 Control MCB
1 No KWH Meter
Incomer - 2
1 No 200A 4P MCCB with accessories
1 No Ammeter with 3CTs & ASS
1 No Voltmeter with 3 Control MCB & VSS
3 No Pse Indicating Light with 3 Control MCB
1 No KWH Meter
Bus Coupler
1 No 200A 4P MCCB with accessories
Bus Bar rating 250A Aluminum
Outgoings
1 No 160A 4 P COS
5 No 160A TPN MCCB
20
2.4
2.5
2.6
4 No 63A TPN MCCB
1 No 100A TPN MCCB
3 No 63A TPN MCB
Supply Installation testing & commissioning of Distribution board made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
outgoing shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder coated
,earthing, danger plates etc. with following acessories (Chem Lab Power DB)
Incomer
1 No 160A TP MCCB
3 No Pse Indicating Light with 3 Control MCB
3 No 63A TPN MCB with ELCB further feed to following
36 No SP MCB
Supply Installation testing & commissioning of Distribution board made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
outgoing shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder coated
,earthing, danger plates etc. with following acessories (MSc Lab Power DB)
Incomer
1 No 160A TP MCCB
3 No Pse Indicating Light with 3 Control MCB
3 No 63A TPN MCB with ELCB further feed to following
51 No SP MCB
Supply Installation testing & commissioning of Distribution board made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
outgoing shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder coated
,earthing, danger plates etc. with following acessories (Other Area Power DB)
Incomer
1 No 160A TP MCCB
3 No Pse Indicating Light with 3 Control MCB
3 No 63A TPN MCB with ELCB further feed to following
24 No SP MCB
21
1
Each
1
Each
1
Each
2.7
2.9
3
3.1
a
b
c
3.2
a
a
b
Supply Installation testing & commissioning of Distribution board made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
outgoing shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder coated
,earthing, danger plates etc. with following acessories (Nano Lab Raw Power DB)
Incomer
1 No 160A TP MCCB
3 No Pse Indicating Light with 3 Control MCB
1 No 63A TPN MCB
3 No 63A TPN MCB with ELCB further feed to following
15 No SP MCB
Supply Installation testing & commissioning of Distribution board made out of 14 SWG sheet steel,
aluminum bus bars, separate Earth bus to be provide throughout the length of the panel.The incoming &
outgoing shall be accomdated in modular multitier arrangement, Adequate size cable alley,powder coated
,earthing, danger plates etc. with following acessories (Nano Lab UPS Power DB)
1
Each
1
Each
Incomer
1 No 160A TP MCCB
3 No Pse Indicating Light with 3 Control MCB
3 No 63A TPN MCB with ELCB further feed to following
18 No SP MCB
CABLE TRAYS & RACE WAYS
Supplying and installing following size of perforated galvanised M.S. cable trays with perforation not more
than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S.
suspenders including bolts & nuts, painting suspenders etc as required.
100 Metre
100 mm width X 50 mm depth X 1.6 mm thickness
60 Metre
300 mm width X 50 mm depth X 1.6 mm thickness
0 Metre
450 mm width X 50 mm depth X 2.0 mm thickness
Supplying and installing following size of perforated galvanised M.S. cable trays bends with perforation not
more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts
& nuts, painting suspenders etc as required.
8
Each
100 mm width X 50 mm depth X 1.6 mm thickness
2
Each
300 mm width X 50 mm depth X 1.6 mm thickness
0
Each
450 mm width X 50 mm depth X 2.0 mm thickness
22
3.3
a
4
A
4.1
a
5
5.1
5.2
5.3
5.4
5.5
5.6
6
Supplying and installing following size of galvanised M.S. raceway with cover , joined with connectors, laid
in floor including bolts & nuts, etc as required.
70
300 mm width X 50 mm depth X 2.0 mm thickness
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including
connections but excluding modular plate etc. as required.
25
Computer Socket outlet
Supply & Installation of exhaust fan in the existing opening, including making good the damage, connection,
testing, commissioning etc. as required.
2
Upto 450 mm sweep
2
Extra for Supply & fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
MANUALLY OPERATED ELECTRIC FIRE ALARM SYSTEM
Smoke detectors
Supply and installation of Analog addressable optic smoke detectors(multi sensor) suitable for detecting a
wide range of smoke from slow smouldering and fast flamming fire.The detector shall have following 50
features and also including supply of all fixing materials complete as required.
Heat detectors
Supply and installation of analog addressable heat detectors.The detectors shall have the following
6
features:
Electronic Hooters
1
Supply, installation, testing and commissioning of Anologue addressable loop sounders.
Manual call station
Supply and installation of Addressable manual call station with in-built monitor module and press/break and
resettable capability constructed of high impact LEXAN sheet with clearly visible operating instructions on
8
the cover and the word "FIRE" shall appear on the front and suitable for surface mounting/flush mounting as
conplete as required.
Fire alarm control panel
Supply, installation,testing and commissioning of micro processor based,digital,distributed processing real
time,multi tasking and multi - user type 2 Loop Analogue addressable type fire alarm control panel (FACP)
1
and control panel shall have the following features including supply of all fixing materials interconnections
earthing complete as required.
P/ F AC for NANO lab including all ducting , diffussers complete 8 ton ceiling mounted indoor unit. (
Hitachi,Daikin make)
1
23
Metre
Each
Each
Each
Nos
Nos
Nos
Nos
Nos
Nos
7
8
a
b
c
d
f
g
9
10
11
P/fixing 1.5 ton spilit AC for laminar flow room with all neccessary piping and drain pipe system, ( Hitachi,
L.G.)
LIGHTING FIXTURE
Supply & Fixing of ceiling fan 1200mm sweep
1 x10 W Recess Mounted CFL Downlighter FBH 120 philips
4 x 18 W Recess Mounted Luminiare TBS 088/4x18
1X 40 W T5 Light Fixture (wipro)
2 X 28 W T5/ (1200 x 150 MM) Pendant Mounted Luminaire ( wipro)
2 X 36 W Surface Mounted Mirroe Optic Luminaire TCS 605/2 x36 EBT
UPS 40 kva ( Three ph in , three ph out)Hitachi make
Providing and fixing M.S. hook S type including cutting of slab and fixing the hook with existing steel in slab
14
8
16
10
20
50
1
60
Providing and fixing M.S. pipe for fixing of lights and fan wherever required .
300 Rmt
TOTAL NON SHEDULED ITEM -B
TOTAL ( A+B)
24
1 Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
LIST OF APPROVED MATERIALS, FOR Civil , interior and plumbing work
S.No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Item Description
Makes Name
Reinforcement and structural steel
Cement
White cement
M.S Pipe (Railings)
Admixtures and Epoxy Flooring
Ceramic Tiles
Vitrified Tiles
Distempers / Synthetic Enamel, Plastic Emulsion Polyurethane,
Automotive Paints, Epoxy Paints & Primers
Fire Resistant Paint
Flush Doors
Laminates
Putty
Block board / Ply
Door Closers, Floor Springs
Hardware
Veneer
Float Glass
Mirror
GI Pipe / MS Pipe
Pre Laminated Board
Silicon Sealant
False Ceiling With T-Section Frame Work
Cement Primer
Sealing Component
CP Fittings
Sanitary Fittings
Kamdhenu , Rathi
JK / Birla/ Shree
J.K white or Birla White Cement
Jindal / Prakash
Aquamix / Bal Endura / SDC India/Lattimore
Kajaria / Nitco / Jhonson / Pavit
Kajaria / Nitco / Jhonson /Pavit
ICI Dulux, Berger, Asian
VIPER by Navair Pvt. Ltd
Merino / Orchid / Sonear / Green
Merino / Greenlam / Century / Vergo
Birla White / Shriram/JK
Green Ply / Merino / Sonear/ Bhutan
Ozone / Briton/ ISI mark
Ozone / Hettich / Kaff
Green / Sonear/ Vergo
Modi /ASAI / Saint - Gobain
ASAI, Saint Gobain, Modiguard
Tata / GST, Jindal, BEC
Bajaj / Action / Sonear / Merino / Greenlam
Dow Corninger Or Approved Equivalent / 3M
Armstrong / AMF / USG
ICI Dulux, Berger, Nerolac
Dow Corning/ Ge Bayer Silicon Ltd. Pidilite / 3m
Jaquar / Hindware
Hindware / ISI MARKED
25
S.No.
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Item Description
Makes Name
SS Sink
Nirali / Jayna
Toilet Accessories I.E Soap Dispenser, Paper Towel Dispenser
ISI marked
G.I. Pipes Fittings
K.S. / Unik / R Brand
CPVC Pipes
ASTRAL/ SUPREME
HDPE pipe
SUPREME/ ISI marked
Electrical Items
Switch Gear (MCCB/MCB/ ELCB)
L&T/ABB/Schneider/Havells
Cable & Wires
Polycab/Havells
Light Fitting & tubes/ CFL
Phillips/Wipro/Bajaj
Fan/Exhaust Fan
Crompton/Orient/Havells
MS conduit
BEC/ ISI Marked
Conduit accessories
Rama/ Noble
Modular switch & socket/ fan regulator
Schneider/ M.K/ Crabtree
MCB DB
L&T/ABB/Schneider/Havells
Instrumentation cable
Finolex/ delton/ D-Link
Metering
Elmeasure/ AE
Indicating lamps
L&T/ABB/Schneider/Havells
Change Over switch
HPL
Fire Alarm
ANG INDIA/System server
26