1. No category

Pallet Changer SP series
Dimensional Drawings of SP3950F
Pallet height clamped
Pallet height unclamped
Dimensional Drawings of SP3970F
Anchor bolt
Leveling bolt
Pallet height clamped
Pallet height unclamped
Dual Pallet Changer
for FANUC ROBODORILL SP series
Pallet height clamped
The ROBODRILL main unit dimensions are for reference purpose only.
Specifications
Pallet size
Maximum pallet loading capacity
Pallet pattern
Tap
points
Tap
points
Height of pallet when clamped
Height of pallet when unclamped
Pallet weight
ROBODRILL FRONT SIDE
Pallet change time
Pallet material
Aluminium
Pallet Dimensions
Workpiece Attachment Area
Pallet Dimensions
Workpiece Attachment Area
Aluminium
Main unit size (mm)
Clamp device weight
Clamping force
Repeatability
Air source
Power supply
Options
･ Air clamp
･ Cable truck
･ Edge locator
･ Cover for spindle through coolant
Please contact us for more information about special specifications of the pallet changer.
Please contact FANUC for information about optional specificationsfor the ROBODRILL
pallet ready.
ROBODRILL FRONT SIDE
Robodrill : High column (100mm) option applied
Interference if tools in the above area is not considered.
All specifications are subject to change without notice.
No part of this catalog may be reproducted in any form.
PHONE 0744-45-0360 FAX 0744-45-0364
48-1, HASHIMOTO SAKURAI
NARA, 633-0047 JAPAN
URL : http://www.kawatatec.co.jp
E-mail : [email protected]
PE2610
Optimal for Multiproduct
Variable quantity production
Tool change or jig adjustment
Pallet change in auto mode with M code
Meaure for chips
through the front door.
Insert M65 into the NC program. The pallets are
Three measures including air blow, coolant flush, and a
that SET UP button is turned on after work set-up.
prevention of production interruptions due to chips.
can be performed
changed automatically by reading M65 in condition
gap switch for the pallet seating portion maximize the
SP series are Pallet changer which exchange the
two independent pallets automatically.
Machining of different parts or emergency parts,
Machining
program
Dividing machine process becomes possible by
use the pallets individually.
Coolant flush
Pallet change
2200mm width - Compact design（SP3950F）
SET UP button ON
Air blow
Versatile pallets!
Machining of different parts
Special pallet for emergency parts
Flexible manufacturing which
matched the demand is
performed by dividing the jigs to
each pallet.
The setup time of jig shorten by having of some
extra pallets to be exchanged according to
installed jig.
Parts A
Dividing machine process
One side pallet mode
This mode enables taking in and out only one side of a
pallet. Separate machining can be set for each pallet
Second process
Parts B
First process
and machining on one side of a pallet only can be
performed.
OPTION
Two different parts with one machine
Additional spare pallet (Optional) for emergency parts
Two machine process with one machine
Edge locator (Optional)
Cabletruck (Optional)
Reduce XY direction alignment
Compatible with rotary tables by
process.
use of a cabletruck and automatic
machining can be carried out by
In shuttle type,
the fastest pallet changing time
Also Corresponding to mass-productive
Pallet changing time
６.７sec.（ＳＰ3950Ｆ）
７.３sec.（ＳＰ3970Ｆ）
The wide pallet area is
suitable for the maching
of small-sized parts that
take time to setup.
This system maximizes
productivity without
stopping the machine
main axis.
use of a hydraulic clamp jig.
The door which can open wide makes
changing of jig or heavy workpiece easy.
Air clamp (Optional)
This is an additional option for use
of an automatic clamp jig using
Ceiling crane is available.
compressed air.
A selector switch is not included.