Abstract - KVK Baramati

Part I - Civil Work at CoE, KVK Baramati (Construction of Building)
Project: Cente of Excellence for Vegetables
Abstract
Centre of Excellence
Sr.
Description
No.
1 Excavation in Soft Soil
Excavation in soft soil.for footing,plinth beams,wall
footing,gutters,tanks including removing the excavated stuff upto a
distance of 1500 m. beyond battery limit area and stacking and/or
speading as directed shoring strutting ,dewatering wherever
required & preparing the bed as directed including backfilling in
layers ,etc.complete.
2 Excavation in Hard Murum
Unit
Total
Cu.mt.
257.81
Cu.mt.
128.90
Cu.mt.
128.90
Cu.mt.
639.30
Cu.mt.
450.00
Cu.mt.
384.10
Cu.mt.
125.00
MT
12.50
Excavation in Hard Murrum, laterite, old cement concrete& lime
masonary etc.for footing,plinth beams,wall footing,gutters,tanks
including removing the excavated stuff upto a distance of 1500 m.
beyond battery limit area and stacking and/or speading as directed
shoring strutting ,dewatering wherever required & preparing the
bed as directed including backfilling in layers ,etc.complete.
3 Excavation in Soft Rock
Excavation in Soft rock , for footing,plinth beams,wall
footing,gutters,tanks including removing the excavated stuff upto a
distance of 1500 m. beyond battery limit area and stacking and/or
speading as directed shoring strutting ,dewatering wherever
required & preparing the bed as directed including backfilling in
layers ,etc.complete.
4 Filling
a) Filling by Contractors Murum: Filling in plinth and floors with
approved material brought from outside by contractor including of
stacking wherever required, including filling in layers of 20 to30
cm. Thick, watering, compaction with rollars /soil compactors
,levelling as per requirement etc. Complete. The proctor density of
such compacted fill shall be 95% of standard proctor.
5 Soling
Providing dry/trap/granite/quartzite/gneiss rubble
stone soiling 15 cm to 20 cm, thick including hand packing
and compacting complete.
6 PCC
Providing and laying in situ Plain Cement Concrete of grade M15
of approved mix design of trap metal with fine aggregates in
proportion of 70% crushed sand 30% river sand for foundation,
floor bedding ect. Including dewatering, formwork, compacting
and curing & placing etc. complete at all depths.
7 Rcc beam & column
Providing and casting in situ cement concrete of M 20 grade
concrete of approved mix design and of trap metal with fine
aggregates in proportion of 70% crushed sand 30% river sand as
per detailed designs including dewatering, centering formwork
with shuttering ply & steel plates,compacting with vibrators,
placing & fixing inserts (viz. plates, pipes for cutouts, anchors,)
formation of cutouts, chases etc. as per detail drawing and curing
complete. RCC structures shall be Fair Finish. (Rate at all heights &
levels and Excluding tor / mild steel Reniforcement).
8 Reinforcement Steel
Basic
Rate
VAT
Service
tax
Total
Rate
Amount(Rs)
Providing, fixing and laying in position Tor / Mild steel bar
reinforcement of various dia. For R.C.C. work as per detailed
designs, drawings, & schedules or as directed including
straightening, cutting, bending, hooking the bars, binding with
wires or welding and supported as required, provinding cover
blocks etc. complete (Rate at all heights & levels & including cost of
binding wire and / or welding rods )
9 UCR 450 mm Thick
Provinding and laying uncoursed rubble masonry in cm 1:6
with fine aggregates in proportion of 70% crushed sand 30%
river sand as per design and as directed by engineer in
charge including raking of joints, curing etc, complete
including
10 230mm BBM
Cu.mt.
154.68
Sq.mt
1304.00
Sq.mt.
1396.72
Sq.mt.
650.00
Sq.mt.
2038.10
Sq.mt.
92.90
Sq.mt.
82.92
Providing & constructing brick.masonry with conventional bricks in
cement mortar 1:5 with fine aggregates in proportion of 70%
crushed sand 30% river sand with RCC bands-patli at every 1.50m
higth as per designs including racking out joints, scaffolding,
watering & curing etc. complete (Rate including cost of steel
reinforcement
11 Flat Int. Plaster
Providing & applying internal cement plaster to walls (minimum
thickness 12 mm ) in cement mortar 1:4 without Neeru finsh to
concrete,stone or brick surface including roughening the concrete
surface, applying the bace coat in line & level,scaffolding,cieaning
& curing etc. complete with grooves,pattas etc. wherever specified
at all heights,level and floors.
12 External Plaster
Providing & applying externally sand faced plaster over brick stone
or concrete surface in two coats (minimum thickness 20mm) using
well graded sand, including roughening the concrete surface,
applying base coat in C.M.1:4 in proper line & level using
waterproofing compound of aproved manufacturer at 1pouch or as
per suggested by arch./consultant with each cement bag, with
fibres, curing the same for not less than two days and keeping the
surface of the base coat rough to receive the sand face treatment,
applying second coat in C.M. 1:4, finishing the surface by taking out
grains curing for not less than 14 days etc. at all heights and levels
at per drawings including curing, scaffolding,including marking of
dhar, panni patti, groove etc. compl.
13 Kota flooring
Providing and fixing kota stone 25mm to 30mm thick of approved
make,size and colour for flooring in required position & in line and
level as directed, set on 1:6 cement mortar with fine aggregates in
proportion of 70% crushed sand 30% river sand including cement
float,maintaining the skirting with the layer of POP and filling the
joints with matching colour cement slurry, curing, rubbing
,cleaning etc.complete.
14 Ceramic Tile Flooring(Toilet/Bath)
Providing and fixing coloured ceramic tiles of approved make,size
and colour and basic rate of Rs. 540/- per sqm for flooring in
required position & in line and level as directed, set on 1:6 cement
mortar including cement float,maintaining the skirting with the
layer of POP and filling the joints with matching colour cement
slurry, curing, rubbing ,cleaning etc.complete.
15 Ceramic Tile Dado(Toilet/Bath)
Providing and fixing coloured ceramic tiles of approved make,size
and colour and basic rate of Rs. 430/-per sqm for dado in required
position & in line and level as directed, set on 1:6 cement mortar
including cement float,maintaining the skirting with the layer of
POP and filling the joints with matching colour cement slurry,
curing, rubbing ,cleaning etc.complete.
16 MS Rolling Shutter
Providing and fixing MS rolling shutter of approved size and make
as per drawings made from interlocking lath section of not less
than 0.9mm thick fittedn with MS clips riveted at either ends
mounted on spring of high tensile spring wire with necessary
rollers and brackets etc. complete.
17 MS door frame
Sq.mt.
12.60
RMT
10.00
RMT
76.00
RMT
65.00
Sq.mt.
4.20
Sq.mt.
32.00
Sq.mt.
21.60
Sq.mt.
82.00
Sq.mt.
82.00
Providing & fixing M.S. Metal door frame as per drawing & design
by using proper MS sections including
holdfast,fittings,hinges,cutting,welding,grinding & with 2 coats of
Approved make enamel paint with 1 coat of primer etc. complete
18 Wooden Door frame
Providing and fixing teak wood door frame of size 125mm X
75mm with all members of same species of timber without
any warp or bow with smooth and well-planed surfaces and
all mortise and tennon joints and tenons not less than 205
cm thick and length of full thickness of transom etc.
complete.
19 Kota skirting
Providing and fixing kota stone skirting 15 to 20 mm thick in cm 1:4
including finishing joints, curing etc. complete
20 MS fabricated Door
Providing & fixing M.S. Metal door as per drawing & design by
using proper MS sections including
holdfast,fittings,hinges,cutting,welding,grinding & with 2 coats of
Approved make enamel paint with 1 coat of primer etc. complete
21 Wooden Door
Providing & fixing in position water proof flush door shutter 32mm
thk and laminated on both sides by 1mm thick lamionate of
approved make and quality including required fittings like Brass
hinges,Aldrops,handles,stopper,tower bolt ,etc. as per
arc,hitectural rawing & design ,cleaning ,etc. complete.
22 Ventilars
Providing & fixing M.S. Metal glass window as per drawing &
design by using proper MS sections including
holdfast,fittings,hinges,cutting,welding,grinding & with 2 coats of
Approved make enamel paint with 1 coat of primer etc. complete
23 Aluminium Window
Providing and fixing in position approved make fully glazed
aluminium windows with aluminium sub frame manufactured out
of HE 9 WP high grade aluminium alloy sections (Zindal make)
confirming to I.S. specifications with sub frame framing 100x35
mm, sliding section of 25mm series as per the detail drawing with
mitered shutter jointis including glass as described below, nylon
mouldings inside,concealed mid lock,nylon rollers,approved quality
PVC lining for glass,and weather strips with all necessary
fixtures,powder coating 50 microns thk.Of approved shade from
approved agency,sealing the crevices around the frame with
approved sealent,cleaning etc.complete.
24 MS Window Grills
Providing & fixing Mild steel Grills of approved make in various
sizes with M.S. sections frame as per detailed drawing & with
approved quality with two Synthetic Enamel of approved make &
shade over a coat of primer etc.complete.
25 Oil Bound Distemper Paint
Sq.mt.
100.00
Sq.mt.
1396.72
Sq.mt.
650.00
Nos
4.00
RMT
4.00
MT
40.00
Providing and applying Oil bound distemper of approved make and
shadeon all surfaces & at all heights in three coats including
scaffolding,preparing the surface by brushing/gringing the conc
edges and brooming down, applying primer palti etc. complete.
26 internal flat oil Paint
Providing and applying flat oil paint of approved make and shade
on all surfaces & at all heights in three coats including scaffolding,
preparing the surfaceby brushing and brooming down,applying
primer, palti and a coat of Birla white putty etc. complete The
dry/wet cleaning of floors/pipes/glass etc after painting is to be
carried out.
27 External Cement Paint
Providing and applying Snowcem cement paint of approved
make and shade to the plastered or exposed
Brick/Stone/Concrete surface in two coats, including
scaffolding, proparing the surface to receive the paint etc.,
complete with curing.
28 Toilet
Providing and fixing in position INDIAN WATER CLOSET of
approved make Sanitaryware in required line & level including. A)
Pan with P or S trap & SWR pipe. B) Necessary brick seat around
pan in cement concrete bedding. C) UPVC water inlet line & Jaguar
continental fittings Complete.
29 Bathroom
Providing and fixing in position bib taps and shower along with
shower arm for bath areas along with 100 mm nanhi traps with
necessary fixtures and fittings etc, complete
30 Structural Steel ( MS Tubular Section)
Providing fabricating & erecting structural steelwork in hot rolled
sections for trusses, purlins,gantry, monorial columns,cable
trays,pipe racks,purlins,castallated beams, staircase & other
structural members with all bracings,gusset plates etc. as per
detailed drawing or as directed at all heights and levels including
removing the scales & burrs,cleaning with phosphoric acid
marking,cutting,fabrication,hoisting,erecting & fixing in
position,making alignment of members making
welded/bolted/rivetted connections etc complete.(4.2 kg/mt)
Sq.mt.
31 PPGL 0.45 mm thk Roofing
Providing and fixing PPGL sheets 0.45mm thk.for roofing
including all approved quality fastenings including all
approved quality fastenings,fixings like metal washers
Neoprene / EPDM washers,caps,side stiching,riveting,mastic
taping etc.complete. with all scaffolding and giving water
tightness test & guarantee etc. complete.(Depth Of
corrugation shall be 40mm and overlape of sheets shall be
250mm)
32 Inspection Chamber ( 450x450) mm for Drainage
Nos
2635.92
3
Providing and constructing masonary INSPECTION CHAMBERS upto
1200mm depth in 230mm thick conventional bricks in C.M.1:5
including excavation up to hard rock 100mm thick 1:3:6
c.c.bedding,C.M.1:4 plaster from inside & outside surfaces with
smooth cement rendering on the internal
surface,haunches,channels including CI medium duty frame and
cover (75kg by weight) fixed in cement concrete 1:2:4 and three
coats of bituminous paint to the frame and cover.
33 Gully trap chamber
Nos
2
Providing and fixing gali traps chamber including necessary
beddings,upto the outside face of the wall & stainless steel heavy
typegrating with ring of approved type complete with necessary
beddings, upto the outside face of the wall & stainless steel heavy
typegrating with ring of approved type complete.
34 Septic tank
Lt.
5000.00
Sq.mt.
168.00
RMT
70.00
Nos
6.00
RMT
20.00
Nos
12.00
Nos
4.00
RMT
250.00
Providing and laying in position RCC pre cast septic tank of
approved size and make as per design and including all necessary
fittings, pipes and vents, waterproofing etc. complete
35 Paving blocks
Providing and laying 600 mm thick paving blocks of approved make
and size in sand bad including preperation of sub base ,
compaction etc. complete.
36 Granite platform
Providing and laying granite platform 18 to 20 mmthk. And 0.70m
wide of approved colour and size , finishing joints etc. complete
37 Stainless steel sinks
Providing and fixingstainless steel sinks of approved make, guage
and qualitywith necessary plumbing fittings of Jaguar continental
bib taps as per design and specifications with necessary fittings etc.
complete.
38 Kotah for tread and risers
Providing and laying kotah sotne for tread and risers 300 mm wide
including polishing and edge finishing as direcetd by engineer in
charge.
39 Turbo vents
Providing and fixing Turbovents of approved quality and size for
roof as pe design and drawing and in locations as directed by
engineer in charge.
40 Wash basin with granite counter
providing and fixing wassh hand basin of approved size and make ,
preferrably Hindustan/ Parry ware with necessary plumbing fittings
including bpillar tap Jaguar continental seris, 320mm waste
coupoling and P trap over grainte platform of approved color and
size etc. complete
41 Cement eaves board
Providing and fixing cement eaves board of approved design and
thickness including painting in two coats etc. complete
42 Gully trap chamber
Nos
2.00
Providing and fixing gali traps chamber including necessary
beddings,upto the outside face of the wall & stainless steel heavy
typegrating with ring of approved type complete with necessary
beddings, upto the outside face of the wall & stainless steel heavy
typegrating with ring of approved type complete.
43 Kerb stone
RMT
150.00
Providing and fixing kerb stones of approved size and shape for
pavements as per design including filling joints in cm, finishing,
curing etc. complete.
Total